Directory Search Results

Print List

#2101339

Range of 2, 3 and 4 port manifold assemblies with brass bodies (brushed chrome finish). The products are supplied with isolation valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1950 Manifolds
Section Subtitle:
Metal.
WRAS Approval Number:
2101339
Note:
1002273 UNI-X end plugs are not considered approved in their own right.
Size:
¾” BSP (M) x ¾” BSP (F).
Marking:
Uponor on operating valve.
Installation Requirements:
R001
Expiry date:
31/01/2026
Model:
1002280 - 2 port manifold. 1002281 - 3 port manifold. 1002282 - 4 port manifold. 1002273 UNI-X end plug (optional) which must be used in conjunction with the above manifolds. 1020248 SPI UNI-C valve insert, which is included with the manifolds, or available as a spare part. Models added June 2021: 1” BSP (M) x 1” BSP (F), with ¾” BSP (M) on valve outlets.
Product Images

Approval Holder:
Uponor GmbH
Company Name
Uponor GmbH
Address
Industriestrasse 56, Hassfurt
Postcode
97437,
Country
Germany
Phone
0034916853600
General Email
mariaisabel.fernandez@uponor.com

View All Listings by this Company
Manufacturer:
Te-sa S.r.l
Company Name
Te-sa S.r.l
General Email

View All Listings by this Company

Print This Approval


#2012359

502 series of automatic air venting valves with brass bodies, plastic float and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 115°C. Model added September 2021 (501500) has a maximum operating temperature of 120°C. All other models have a maximum operating temperature of 115°C.

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
2012359
Size:
See model
Marking:
Caleffi logo on body.
Installation Requirements:
R001 R200
Expiry date:
31/12/2025
Model:
Serie 502 Robocal: ⅜" BSP (M): 502430. 502430 CON. 502430 CST. 502431 BSC. 502434 CST. 502435 CST. 502533. 502533 FRT. 502533 RIF. 502533 TAK. 502934 CST. 502937 BSC. Art. 502 Robocal with flow valve: ¼" BSP (M): 502420. 502530. ⅜" BSP (M): 502530 TH. 502530 TH1. 502930 TH. Art. 502 Robocal Long: ⅜" BSP (M): 502630. 502630 CST. 502630 WLF. 502631 CST. 502635 CST. 502636 CST. 502638 CST. 502638 OEM. 502730. 502730 A. 502730 BSC. 502730 CST. 502730 GRN. 502730 NTR. 502822. ½" BSP (M): 502640. 502643A. 15mm compression: 502649. Art. 502 Minical ⅜": ⅜" BSP (M): 502030. 502030 CON. 502030 CST. 502031. 502034 CST. 502035 CST. 502036 CST. 502037 CST. 502037 VLL. 502037 WLF. 502038 CST. 502130. 502130 CST. 502130 ENC. 502130 FRT. 502130 GRN. 502130 TAK. 502130 TH. 502130 TH1. 502131. 502131 TH. 502132 DEC. 502133. 502134 DEC. 502135 RIF. 502231. 502231 CST. 502231 TH. 502232 TH. Art. 502 Minical ½" BSP (M): 502020 CST. 502040. 502040 CON. 502040 CST. 502040 MI. 502040A. 502041. 502041 MI. 502043. 502043 CST. 502043 IMM. 502043A. 502043A CST. 502046 IMM. 502140. 502140 ENC. 502140 FRT. 502141. 502142. 502144 ART. 502144 DEC. 502145 RIF. 502241. 502242 TH. 502243A. 502246 IMM. 502343A. ¾" BSP (M): 502050. 502051. 502052 CST. 1" BSP (M): 502060. 502061. Model added September 2021: ¾” BSP (F): 501500.
Product Images

Approval Holder:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company

Print This Approval


#2101036

Range of deck mounted, manually operated blending valves with brass bodies (various finishes), incorporating ceramic cartridge headworks with either single lever (6900XX/METAL only) or dome type (all other models). The product is supplied with a shower hose and handset. Maximum working pressure 3.0 bar. Maximum operating temperature 60°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
2101036
Note:
R009 only applies to the models supplied with PEX lined hoses.
Size:
PEX or EPDM lined hose assemblies with ½” captive nuts
Marking:
Swadling Brassware or Swadling logo on operating member. Swadling logo on conical nut.
Installation Requirements:
R001 R009 R010 R040
Expiry date:
31/01/2026
Model:
Illustrious 9900XX, 9903XX, 9906XX, 9909XX & 9902XX. Engineer 8900XX. Absolute 6900XX/METAL. XX denotes finish and can be replaced with: NP = Nickel Plate. NB = Nickel Brushed. CP = Chrome Plated. MG = Gold Plated. LB = Living Brass. GB = Gold Brushed. BB = Brushed Brass. AB = Aged Brass.
Product Images

Approval Holder:
Matki Plc.
Company Name
Matki Plc.
Address
Churchward Road Yate Bristol
Postcode
BS37 5PL

View All Listings by this Company
Manufacturer:
Swadling Brassware
Company Name
Swadling Brassware
Address

View All Listings by this Company

Print This Approval


#2012303

Range of thermostatic mixing valves incorporating brass bodies (various finishes). Flow is controlled via a detent headworks and depending on model can be either a 2 or 3 headwork option supplying shower or bath outlets. The temperature is controlled independently via a thermostatic cartridge. Inlets incorporate a plastic strainer and a single check valve cartridge (however the complete unit has not been tested to demonstrate it provides adequate backflow protection). Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2012303
Size:
½” BSP (F) x ½” BSP (F)
Marking:
Almar logo (Almar with triangle above it), made in Italy on face plate.
Installation Requirements:
R001 R010 R040
Expiry date:
31/12/2025
Model:
E176632.xxxyyzz – 2 way – round trim E176633.xxxyyzz – 3 way – round trim E176672.xxxyyzz – 2 way with fixed rod – square trim E176673.xxxyyzz – 3 way with fixed rod – square trim E176682.xxxyyzz – 2 way – square trim E176683.xxxyyzz – 3 way – square trim Where xxx denotes finish and can be replaced with: 021 – Polished chrome 033 – Raw brass 130 – Matt black 131 – Matt white 275 – Nickel brushed 104 – Brushed brass yy alphanumeric code to indicate each customer individually. zz alphanumeric code to indicate packaging information.
Product Images

Approval Holder:
ALMAR s.r.l
Company Name
ALMAR s.r.l
Address
Viale dello Sport, 17 bis Gavirate (VA)
Postcode
21026
Country
Italy
General Email
info@almarmadeinitaly.it

View All Listings by this Company
Manufacturer:
ALMAR s.r.l
Company Name
ALMAR s.r.l
Address
Viale dello Sport, 17 bis Gavirate (VA)
Postcode
21026
Country
Italy
General Email
info@almarmadeinitaly.it

View All Listings by this Company

Print This Approval


#2101310

Range of ‘right hand’ or ‘left hand’ tempering valves having a plastic body incorporating a thermostatic element. The cold inlet incorporates a single check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 3.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2101310
Size:
½” BSP (M) x 22.30mm OD manifold connection.
Marking:
Caleffi logo on body.
Installation Requirements:
R001
Expiry date:
31/01/2026
Model:
H0007852 Right Hand Tempering Valve. H0008522 Left Hand Tempering Valve
Product Images

Approval Holder:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 91 of 1576

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.