Directory Search Results

Print List

#2206332

Range of stop valves with plastic bodies and an EPDM diaphragm. The valves are operated via a switch located on the valve. The RCL and RPL models can also be operated by a remote switch. The product incorporates a plastic strainer central to the body. All valves are for use with copper pipe (manufactured to BS EN 1057). The PL suffix valves are also for use with PEX pipe (manufactured to BS7291-3). Models added Jan 2025 are for use with PE80 & PE100 pipes manufactured to BS EN 12201:2 at the inlets and the outlets are suitable for PEX pipe manufactured in accordance with BS7291 and copper pipe manufactured in accordance with BS EN 1057. For above ground use only. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2336 Valves
Section Subtitle:
Stop - plastic.
WRAS Approval Number:
2206332
Size:
See model.
Marking:
CL suffix models: Surestop on body and switch. Flow arrow on body. PL suffix models added June 2023: All models: Surestop and flow arrow on body. Surestop, model and other product information on adhesive label on body. RPL models are also marked with: Surestop on remote switch.
Installation Requirements:
R001 R008
Expiry date:
30/06/2027
Model:
SS/15/RCL - Surestop 15mm compression Stopcock. SS/22/RCL - Surestop 22mm compression Stopcock. SS/15/SCL - Surestop 15mm compression Stopcock. SS/22/SCL - Surestop 22mm compression Stopcock. Models added June 2023: SS-15-RPL - Surestop 15mm pushfit Stopcock, SS-22-RPL - Surestop 22mm pushfit Stopcock, SS-15-SPL - Surestop 15mm pushfit Stopcock, SS-22-SPL - Surestop 22mm pushfit Stopcock. Model added Jan 2025: SS/2522/NBP - Surestop MDPE Stopcock 25/22, SS/2522/RNBP - Surestop MDPE Stopcock 25/22

Approval Holder:
Surestop Ltd.
Company Name
Surestop Ltd.
Address
Unit 7 Birmingham Trade Park, Kingsbury Road, Erdinton, Birmingham
Postcode
B24 9PS
Phone
0845 643 1800

View All Listings by this Company

Print This Approval


#2207024

Range of commercial, front loading, heat pump tumble dryers with flow controlled via a solenoid valve. Maximum working pressure 8.0 bar. Cold water use only.

Section:
2500 Tumble dryer(s)
Size:
Stainless steel braided EPDM lined flexible hose assembly with ¾” BSP captive nut end connection.
Marking:
Primus on front panel, Alliance laundry systems, model, product info on label on upper back panel
Installation Requirements:
R001 R150
Expiry date:
31/07/2027
Model:
DT190AH, DT250AH, DT285AH, DT345AH, DT250BH, DT285BH, DT345BH.

Approval Holder:
Alliance Laundry Systems s.r.o
Company Name
Alliance Laundry Systems s.r.o
Address
Místecká 1116, 742 58, P?íbor, Czech Republic
General Email
supportz@alliancels.cz

View All Listings by this Company

Print This Approval


#2206354

Range of wall mounted mirrored units incorporating an electronically controlled combination tap assemblies. Flow is controlled via solenoid valve which is actuated by an infra-red sensor. The spout outlets incorporate a plastic aerator. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2206354
Note:
R008 applies to the solenoid valve and its housing. This product may not comply with the requirements of regulation 4(1)(b). Consult your local water undertaker prior to installation.
Size:
½” BSP (M).
Marking:
Dolphin Solutions Ltd. logo (letter D with integral dolphin silhouette) on underside of mounting bracket. Products with the Alavo behind mirror baseplate mounting option are marked Dolphinsolutions.co.uk on the underside of the base plate.
Installation Requirements:
R001 R007 R008 R040 R570
Expiry date:
30/06/2027
Model:
DS191.xx - Dolphin Alavo behind mirror inform (SMART) tap. Where xx denotes the size and shape of the mounting bracket and can be any combination of letters and/or numbers.

Approval Holder:
Dolphin Solutions Limited
Company Name
Dolphin Solutions Limited
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company
Manufacturer:
Dolphin Solutions Limited
Company Name
Dolphin Solutions Limited
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company

Print This Approval


#2206363

Range of concealed WC flushing cisterns incorporating a BS 1212-4 side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 3 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2206363
Size:
½” BSP (M).
Marking:
Geberit on adhesive label on front of cistern Model No. & other information on adhesive label within cistern 6L waterline mould on cistern.
Installation Requirements:
R001 R556 R571 R581
Expiry date:
30/06/2027
Model:
109.205.00.1 Geberit Kappa concealed cistern 15 cm, 6 / 3 litres, installation height 82 cm. 111.260.00.1 Geberit Duofix frame for wall-hung WC, 82 cm, with Kappa concealed cistern 15 cm. Model added July 2023: 111.260.00.3.

Approval Holder:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Warwick
Postcode
CV34 6NH
Country
United Kingdom
Phone
01926516800
General Email
enquiries@geberit.co.uk

View All Listings by this Company

Print This Approval


#2207046

Range of WC flushing cisterns incorporating a side entry BS 1212-4 (2016) compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2207046
Size:
½” BSP (F)
Marking:
Roper Rhodes and models number on label on front of cistern. 6 Litre inside.
Installation Requirements:
R001 R556 R571 R581
Expiry date:
31/07/2027
Model:
TR9009 TR9005 TR9015 Models added March 2024 INST13005 INST13015 INST13009

Approval Holder:
Roper Rhodes Ltd
Company Name
Roper Rhodes Ltd
Address
Brassmill Lane Industrial Estate Bath
Postcode
BA1 3JF
Country
United Kingdom
General Email
paulw@roperrhodes.co.uk

View All Listings by this Company

Print This Approval


#2209021

Range of non-verifiable double check valve assemblies consisting of two spring loaded resilient trim in-line check valve cartridges housed in DZR brass bodies. Maximum working pressure 16.0 bar Maximum operating temperature 85°C

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
2209021
Marking:
IDC logo (~E~ within a circle), size, PN, flow arrow and CR on body
Installation Requirements:
R001
Expiry date:
30/09/2027
Model:
ACV0030501 ½” BSP (F) inlet/outlet ACV0030402 ¾” BSP (F) inlet/outlet ACV0030701 1” BSP (F) inlet/outlet ACV0030601 1.1/4" BSP (F) inlet/outlet ACV0030801 1½” BSP (F) inlet/outlet ACV0030901 2” BSP (F) inlet/outlet

Approval Holder:
IDC Plumbing & Heating Technology (Beijing) Co., Ltd.
Company Name
IDC Plumbing & Heating Technology (Beijing) Co., Ltd.
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing
Postcode
100015
Country
China
Phone
008610 51659550 ext 312
General Email
Jerry.tang@idcgroup.com.cn

View All Listings by this Company

Print This Approval


#2211812

‘Bubblestream’ range of tap outlet (stream shaper) adaptors incorporating a swivel mechanism and a stainless steel mesh aerator. All models, apart from 07.9870.0, are supplied with a M22 to M24 adaptor. All models, apart from 07.9870.0 & 07.9880.0, incorporate a plastic flow regulator. Maximum operating temperature 60°C.

Section:
0435 Taps and shower valves - Components
Section Subtitle:
Aerators, Flow Straighteners, Flow Regulators and Restrictors.
WRAS Approval Number:
2211812
Note:
Open outlet use only Claims made by the manufacturer for flow rate have not been tested and are not considered part of the approval listing.
Size:
M22 or M24
Marking:
Bubble stream on swivel connector
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2027
Model:
07.9870.0 Bubblestream M22 (no flow reg) 07.9880.0 Bubblestream M22 or M24 (no flow reg) 07.9881.0 Bubblestream M22 or M24 8.0 lpm 07.9882.0 Bubblestream M22 or M24 7.0 lpm 07.9883.0 Bubblestream M22 or M24 6.0 lpm 07.9884.0 Bubblestream M22 or M24 5.0 lpm

Approval Holder:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company
Manufacturer:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company

Print This Approval


#2212700

Range of deck mounted side valve with brass bodies and chrome trim sets. Models PDV030, PDV032, PDV067, PDV068 incorporate quarter turn ceramic disc headworks and models PDV029, PDV031 incorporate half turn ceramic disc headworks with various operating members (See models). Models PDV 031, PVD 032 and PVD 068 are supplied with metal back nuts. Models PDV 029, PDV 030 and PDV 067 are supplied with plastic backnuts. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:
0440 Headworks
Section Subtitle:
Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
WRAS Approval Number:
2212700
Size:
See models
Marking:
PDV 029- Lefroy brooks on indice PDV 030- Lefroy brooks on indice PDV 031- Lefroy brooks on indice PDV 032- Lefroy brooks on indice PDV 067- Lefroy brooks lion logo on underside of operating member PDV 068- Lefroy brooks lion logo on underside of operating member
Installation Requirements:
R001
Expiry date:
31/12/2027
Model:
PDV 029- ½” BSP male inlet and outlet- With cross top operating members PDV 030- ½” BSP male inlet and outlet-With single lever operating members PDV 031- ¾” BSP male inlet and outlet-With cross top operating members PDV 032- ¾” BSP male inlet and outlet-With single lever operating members PDV 067- ½” BSP male inlet and outlet-With single lever operating members PDV 068- ¾” BSP male inlet and outlet-With single lever operating members

Approval Holder:
Lefroy Brooks
Company Name
Lefroy Brooks
Address
Unit 3 Marston Industrial Estate Marston Road Wolverhampton
Postcode
WV2 4LX
Country
United Kingdom
Phone
01902 390 891
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

Print This Approval


#2203376

Single-hole, single outlet (swivel) combination tap assembly with brass body (chrome plated), incorporating a ceramic cartridge headwork with a single lever operating member. The product has a pull-out spray outlet which incorporates a plastic aerator and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection The cold inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
2203376
Size:
Stainless-steel braided, EPDM lined flexible hose assemblies incorporating ½” captive nut end connections.
Marking:
Buster & Punch London on body
Installation Requirements:
R001 R010 R090
Expiry date:
31/03/2027
Model:
RKT-071664, RKT-351667, RKT-051665, RKT-591666, RKT-071660, RKT-361663, RKT-051661 & RKT-591662 COMBINATION TAP ASSEMBLIES

Approval Holder:
Buster and Punch Ltd
Company Name
Buster and Punch Ltd
Address
29 St. Peters Street Stamford
Postcode
PE9 2PF

View All Listings by this Company

Print This Approval


#2207369

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates either a combined EPDM washer and stainless steel strainer with a plastic flow straightener, or an EPDM washer with a plastic aerator. The product is supplied with a click type waste, verified by test. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2207369
Size:
Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.
Marking:
ebb + flo on body.
Installation Requirements:
R001 R006 R010
Expiry date:
31/07/2027
Model:
62689 HEACHAM BASIN MIXER COMBINATION TAP ASSEMBLY

Approval Holder:
Toolstation Ltd.
Company Name
Toolstation Ltd.
Address
Travis Perkins PLC Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton
Postcode
NN5 7UA
Country
United Kingdom
Phone
07392109053
General Email
benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 90 of 445

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.