Directory Search Results

Print List

#250909001

Range of stainless steel, interlocked shower hoses with EPDM liner and O-rings. Open outlet use only. Maximum operating temperature 65°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
250909001
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
G 1/2"
Marking:
AXOR or Hansgrohe laser etched on the nut.
Installation Requirements:
R001
Expiry date:
30/09/2030
Model:
28 112 xxx - AXOR - Metal shower hose 1.25 m 28 116 xxx - AXOR - Metal shower hose 1.60 m 28 120 xxx - AXOR - Metal shower hose 2.00 m

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#260102003

Range of stainless-steel braided, EPDM lined flexible hose assemblies. The captive nut end connections incorporate a washer, the M10 connection incorporates an ‘O’-ring. Maximum working pressure 10.0 bar. Maximum operating temperature 90°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
260102003
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models below
Marking:
VIOSPIRAL PAT UNI, WRAS and year of manufacture (YY) on ferrule. Ovoflex, WRAS and technical information on adhesive label on hose.
Installation Requirements:
R001
Expiry date:
31/01/2031
Model:
Novaflex inox flexible connecting hose DN10, F-F 1/2'' BSP: 00-8XX Where XX denotes length: 00 - 20cm, 01 - 25cm, 02 - 30cm, 03 - 35cm, 04 - 40cm, 05 - 45cm, 06 - 50cm, 07 - 60cm, 08 - 70cm, 09 - 80cm, 10 - 90cm, 11 - 100cm, 12 - 120cm, 13 - 150cm, 14 - 200cm. Novaflex inox flexible connecting hose monoforo DN8, M10x1 - F 1/2'': 00-8XX Where XX denotes length: 35 - 30cm, 36 - 40cm, 37 - 50cm, 38 - 60cm, 39 - 80cm.

Approval Holder:
Viospiral SA
Company Name
Viospiral SA
Address
10 Kehagia Str AG I Rentis 18233
Country
Piraeus

View All Listings by this Company

Print This Approval


#251102716

Excelsior Range of Direct and indirect unvented storage cylinders. The secondary circuit is factory fitted with a temperature and pressure relief valve set at 7.0 bar @ 90˚C. The product is supplied with an inlet control group (safety kit) consisting of a pressure reducing valve pre-set at 3.0 bar, strainer, an expansion relief valve set at 6.0 bar and a check valve cartridge (verified by test - suitable for backflow protection against Fluid Category 2). A tundish and expansion vessel are also provided Maximum working pressure: 5.5 Bar (All Circuits) Maximum operating temperature 90.0°C

Section:
1890 Unvented Heating Apparatus
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Sizes can be any of the following for all models: Cold Inlet: 22mm stub, 28mm stub, ¾” BSP (F) or 1” BSP (F) Primary and heat pump circuits: 22mm stub, 28mm stub, 32mm stub, ¾” BSP (F), 1” BSP (F) or 1 ¼” BSP (F) Hot Outlet: 22mm stub, 28mm stub, ¾” BSP (F) or 1” BSP (F) Secondary circulation circuit: ½” BSP (F) or ¾” BSP (F)
Marking:
Fabdec, model name, max pressure, max temp, capacity and other technical information on label on body.
Installation Requirements:
R001
Expiry date:
30/11/2030
Model:
Model (Available Capacity (L)) WDE-D2 (80, 100, 130 ,150, 175, 215, 255, 305, 400& 500L) WDE-C1(80, 100, 130 ,150, 175, 215, 255, 305, 400& 500L) WS-C1 (130, 150, 175, 215, 255, 305, 400 & 500 L) WS-C2 (130, 150, 175, 215, 255, 305, 400 & 500 L) WHP-C1 (150, 175, 215, 255, 275, 305, 400 & 500L) WHP-C2 (150, 175, 215, 255, 305, 400 & 500L) WT-D2F5 (100, 130, 150, 175 & 210L) WT-C1F5 (100, 130, 150, 175 & 210L) WT-D2F4 (80, 100, 130, 150 & 165L) WT-C1F4 (80, 100, 130, 150 & 165L) WTR-C2F5 (100, 130, 150, 175 & 210L) WB (Buffer Vessel Only)

Approval Holder:
Fabdec Ltd
Company Name
Fabdec Ltd
Address
Grange Road Ellesmere Shropshire
Postcode
SY12 9DG

View All Listings by this Company

Print This Approval


#251102304

Section:
2000 Shower Valves
Description:
A Shower valve(s) with manual temperature control.
Wall mounted. Incorporates an approved check valve cartridge (however the complete assembly has not been tested to demonstrate it provides backflow protection).
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2030

Product IdentificationSurface Finish / ColourDimensionMax Working Pressure (bar)Max Operating Temp (°C)MarkingMarking locationAll metals in the water pathway are on the 4msi positive listHeadwork for Flow ControlFixing TypeSpout OutletIncludes
71 681 xx0Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finishG 1/2 (offset)1070hansgroheon the handleYesCeramic cartridgeNot ApplicableBackflow prevention

Notes & Further Information

Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish


Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturers:
Hansgrohe d.o.o.

Print This Approval


#251115308

Section:
2000 Shower Valves
Description:
A Shower valve(s) with manual temperature control.
Wall mounted. Incorporates an approved check valve cartridge (however the complete assembly has not been tested to demonstrate it provides backflow protection).
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2030

Product IdentificationSurface Finish / ColourDimensionMax Working Pressure (bar)Max Operating Temp (°C)MarkingMarking locationAll metals in the water pathway are on the 4msi positive listHeadwork for Flow ControlFixing TypeSpout OutletIncludes
86005640Chrome15mm compression joint1080TRITON,86005640Handle/ bodyNoCeramic cartridgeInlet Strainer

Approval Holder:
Triton Showers (Part of Norcros Group Holdings)
Company Name
Triton Showers (Part of Norcros Group Holdings)
Address
Triton Road, Nuneaton, Warwickshire
Postcode
CV11 4NR
Country
United Kingdom
Phone
07779013141
General Email
paulrowley@tritonshowers.co.uk

View All Listings by this Company
Manufacturers:
Xiamen Fotec Sanitary Ware Co., Ltd.

Print This Approval


#251102041

Wall mounted, concealed shower valve (brass bodies – various finishes) incorporating a ceramic cartridge headwork with single lever operating members and a manual diverter to shower outlets with a single lever operating member. Maximum working pressure 10.0 Bar Maximum operating temperature 60.0°C

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
251102041
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F)
Marking:
Grohe Spa on backplate.
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2030
Model:
24.340.xxx Must be installed with rough-in set 35.600 or 35.604. Where xxx denotes finish, can be replaced by: 000 – Chrome DC0 – Super steel AL0 – Brushed hard graphite

Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval


#251108005

Range of wall mounted, manually operated, concealed shower valves (stainless steel bodies – various finishes) incorporating a ceramic cartridge headwork with a single lever operating member. Maximum working pressure: 5.0 bar. Maximum operating temperature: 60°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
251108005
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” NPT (F).
Marking:
BAGNODESIGN on faceplate ring.
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2030
Model:
BDM-STU-410-XX Studio 316 wall mounted concealed shower mixer. XX’ denotes finish and is replaced with: Chrome(CP), Brushed Nickel (NB), Matt Black(MB), Anthracite (AN), Gold (GD), PVD Gold (PG), Soft Bronze (SBZ), Santiago (RCP), Oyster (OYS), Brushed Steel (BS) Burgundy (BUR), Black (MB-C), Cocoa (CO-C), Mandarin (MD-C), Blueberry (BY-C), Lip Gloss (Pink)(LG-C), Sage (SA-C) & Truffle (TF-C).

Approval Holder:
BAGNODESIGN (SANIPEXGROUP)
Company Name
BAGNODESIGN (SANIPEXGROUP)
Address
Unit 1 Oakwell Park Trading Estate Birstall Leeds
Postcode
WF17 9LU
Country
United Kingdom
General Email
dan@sanipexgroup.com

View All Listings by this Company

Print This Approval


#2203070

A range either concealed or exposed wall mounted thermostatic mixing valves with brass bodies (exposed models are chromium plated). Models NU-089, NU-119 incorporate ¼ turn ceramic disc headworks. Model NU-119 & NU-109 incorporate a manual diverter with a shut off. All models incorporate a thermostatic cartridge that controls the temperature. The inlets of all models incorporate stainless steel filters and approved check valve cartridges; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10 bar. Maximum working temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2203070
Note:
All models are supplied without operating members
Size:
F3004- 15mm compression inlets x ¾” BSP male outlet F3002- 15mm compression inlet x 1/2" BSP male outlet F2301- 3/4" BSP female inlet x 1/2" BSP female outlet F2302- 3/4" BSP female inlet and outlet F2303- 3/4" BSP female inlet x 1/2" BSP female F2304- 3/4" BSP female inlets, diverter outlets are 3/4" BSP female headwork outlet is 1/2" female F2092- 1/2" BSP female inlet and outlet
Marking:
SCUDO on Body
Installation Requirements:
R001 R010 R040
Expiry date:
31/03/2027
Model:
NU-089, NU-109 & NU-119 CONCEALED THERMOSTATIC MIXING VALVES

Approval Holder:
Harrison Bathrooms Incorporating Scudo
Company Name
Harrison Bathrooms Incorporating Scudo
Address
Prospect Works Keighley West Yorkshire
Postcode
BD21 4LA
Country
United Kingdom
Phone
01535 663024
General Email
adam.barnsley@harrisonbathrooms.com

View All Listings by this Company

Print This Approval


#2209351

Wall mounted, exposed, thermostatic shower mixing valve (chromium plated brass). The products incorporate a ¼ turn ceramic disc. Temperature is controlled independently via a thermostatic cartridge with a manual override button. The products have dome type operating members. Each inlet incorporates a combined EPDM washer and stainless steel strainer and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 6.0 bar. Maximum operating temperature 65°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2209351
Note:
This approval does not include a shower hose and handset, or an overhead shower and shower riser.
Size:
¾” captive nut
Marking:
Ideal standard on valve body
Installation Requirements:
R001 R010 R040
Expiry date:
30/09/2027
Model:
A7255AA

Approval Holder:
Ideal Standard (UK) Ltd
Company Name
Ideal Standard (UK) Ltd
Address
Old Road (Lodge 1) Armitage, Rugeley, Staffordshire
Postcode
WS15 4BT
Country
United Kingdom
General Email
tyeomans@idealstandard.co.uk

View All Listings by this Company

Print This Approval


#251088304

Wall Mounted shower valve with shower hand-set, hose with riser rail and overhead shower, available in various finishes. A05846 incorporates a single sequential headwork, all other models incorporate 1/4 turn ceramic disc headwork. Some model include a flow regulator. Models A5846 & A05847 maximum pressure 10.0 bar. All other models maximum pressure 5.0 bar Maximum temperature all models 65°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
251088304
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½”x ¾” BSP (M) offset unions or 15mm compression.
Marking:
'nabis' on shower valve body
Installation Requirements:
R001 R040
Expiry date:
31/10/2030
Model:
A05839, A05840, A05841, A05842, A05843, A05844, A05845, A05846 & A05847.

Approval Holder:
Wolseley UK Ltd.
Company Name
Wolseley UK Ltd.
Address
2 Kingmaker Court, Warwick Technology Park, Warwick
Postcode
CV34 6DY
Country
United Kingdom
Phone
01926705792
General Email
martin.lister@wolseley.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 814 of 894

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.