Directory Search Results

Fittings Materials
Print List

#250402015

Range of shower sets incorporating either a wall elbow or wall elbow with hand shower, (chromium plated brass). The shower holder incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Open outlet use only Maximum operating temperature 60.0°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250402015
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP M
Marking:
28490660 & 28490970 - Dornbracht logo on wall cover 27802660, 27802970 & 27803660 - Dornbracht logo on wall cover. Dornbracht logo on shower handset
Installation Requirements:
R001 R040
Expiry date:
30/04/2030
Model:
27802660 27802970 27803660 28490660 28490970 Alternative cover plates 2780xYYY – complete shower sets 28490xxx – wall elbows only (part of article 2780xYYY)
Product Images
Approval Holder:
Dornbracht GmbH & Co. KG.
Company Name
Dornbracht GmbH & Co. KG.
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval

#250408013

Range of overhead shower outlets brass and stainless-steel bodies in various finishes, incorporating stainless steel filter washers and flow regulators. Open outlet use only. Maximum operating temperature 85⁰C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250408013
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F).
Marking:
Coalbrook logo on the upper face
Installation Requirements:
R001 R040
Expiry date:
30/04/2030
Model:
XX 4013 YY, XX 4014 YY. XX denotes the name of the product, example CO – Coalbrook. Middle 4 numbers is a numeric code allocated to the model and remains constant. YY denotes the colour finish, examples are but not limited to – BN – Brushed Nickel. CP – Chrome. GM – Gunmetal. BB – Brushed Brass.
Product Images
Approval Holder:
Davroc Limited
Company Name
Davroc Limited
Postcode
EN11 0QS
Country
United Kingdom
General Email
rob@lefroybrooks.co.uk

View All Listings by this Company

Print This Approval

#250402055

Range of wall and ceiling mounted overhead shower outlets, (plastic bodies – various finishes). Both models incorporate a built-in pressure regulator. Maximum operating temperature 85°C. Open outlet use only

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250402055
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1/2” BSP M.
Marking:
GROHE logo on showerhead.
Installation Requirements:
R001 R040
Expiry date:
30/04/2030
Model:
22121xxx - Grohe Rainshower Mono 310. Head shower set 422 mm, 1 spray. 22122xxx - Grohe Rainshower Mono 310. Head shower set ceiling 142 mm, 1 spray. Where xxx denotes finish, and can be replaced by the following: 000 – Chrome KF0 – phantom black
Product Images
Approval Holder:
Grohe AG
Company Name
Grohe AG
Address
Industriepark Edelburg Hemer
Postcode
58675
Country
Germany
Phone
02372 930
General Email
marc.engelhardt@lixil.com

View All Listings by this Company

Print This Approval

#250404023

Range of shower outlets, (plastic bodies - chrome plated) incorporating a plastic flow regulator. Products 24 540 xx0, 24 541 xx0, 24 550 xx0, 24 551 xx0 to be installed together with 24 573 180 Hansgrohe Raindance Alive Basic set. Maximum operating temperature 60°C. Open outlet use only.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250404023
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Open outlet use only. Products 24 540 xx0, 24 541 xx0, 24 550 xx0, 24 551 xx0, 24 523 xx0 to be installed together with 24 573 180 Hansgrohe Raindance Alive Basic set.
Marking:
Hansgrohe on face plate
Installation Requirements:
R001 R040
Expiry date:
30/04/2030
Model:
24 520 XX0 24 521 XX0 24 530 XX0 24 531 XX0 24 540 XX0 24 541 XX0 24 550 XX0 24 551 XX0 24 573 180 300190XX 300191XX 300193XX 300194XX 310190XX 310193XX 310194XX 340190XX 340191XX Model added May 2025: 24 523 xx0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
Product Images
Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval

#240708008

Shower handsets, incorporates a stainless steel strainer washer at the inlet. Maximum operating temperature 65°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240708008
Size:
See models.
Marking:
Aqualisa on handset
Installation Requirements:
R001 R040
Expiry date:
31/07/2029
Model:
704340 80mm single mode handset AL060 – ½” BSP (M)
Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval

#2301106

Range of shower handsets with plastic bodies.

Non-metallic materials and components comply with BS6920 at 70°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2301106
Note:
Open outlet use only.
Size:
½” BSP (M).
Marking:
Aqualisa on handset.
Installation Requirements:
R001 R040
Expiry date:
31/01/2028
Model:
706286 - 65mm matt black one mode handset AL222
Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval

#250408010

Range of in-line Y patterned strainers with bronze bodies and a stainless-steel mesh strainer. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:
1715 Strainers
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See model.
Marking:
Vantec, Model & WRAS on metal dataplate on body Vantec, size, PN, DN and flow arrow body
Installation Requirements:
R001 R120
Expiry date:
30/04/2030
Model:
VAS602 Size: ½” - 2” BSP (F), NPT (F) or BSPP (F).
Approval Holder:
Vantec Industrial
Company Name
Vantec Industrial
Address
128, City Road, London
Postcode
EC1V 2NX
Country
United Kingdom
Phone
+971543038194
General Email
A.OMER@VANTECINDUST.CO.UK

View All Listings by this Company

Print This Approval

#250408017

Range of Y patterned strainers with a brass body. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1715 Strainers
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” to 2” BSP/BSPT (F) x (F)
Marking:
Conex, size, PN rating and flow arrow on body. Conex Universal Ltd and size on data label.
Installation Requirements:
R001 R120
Expiry date:
30/04/2030
Model:
IDC 180210 series comprising of model codes: 180210RR0160404 180210RR0160606 180210RR0160808 180210RR0161010 180210RR0161212 180210RR0161616 180210FF0160404 180210FF0160606 180210FF0160808 180210FF0161010 180210FF0161212 180210FF0161616
Product Images
Approval Holder:
Conex Universal Limited
Company Name
Conex Universal Limited
Address
Unit 95, Vantage Point Kingswinford
Postcode
DY6 7FT
Country
United Kingdom
Phone
+44 (0)121 5772831
General Email
Christopher.Harte@IBPGroup.com

View All Listings by this Company
Manufacturer:
Zheijang IDC Fluid Control.
Company Name
Zheijang IDC Fluid Control.
General Email

View All Listings by this Company

Print This Approval

#250402039

Range of strainers with epoxy coated ductile iron bodies and stainless-steel mesh. Maximum working pressure 25 Bar Maximum operating temperature 85°C

Section:
1715 Strainers
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
DN65 – DN150 flanged inlet/outlet
Marking:
Crane logo, PN and temperature on data plate on body. Crane logo, DN and flow arrow on body.
Installation Requirements:
R001
Expiry date:
30/04/2030
Model:
FM 278W
Product Images
Approval Holder:
Crane Ltd
Company Name
Crane Ltd
Address
Crane House, Epsilon Terrace, West Road, Ipswich
Postcode
IP3 9FJ
Country
United Kingdom
Phone
01473 277 364
General Email
tturner@cranebsu.com

View All Listings by this Company

Print This Approval

#250402062

Range of strainers with epoxy coated ductile iron bodies and stainless-steel mesh. Maximum working pressure 25 Bar Maximum operating temperature 85°C

Section:
1715 Strainers
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
DN65 – DN150 flanged inlet/outlet
Marking:
Hattersley logo, model, PN and temperature on data plate on body. Hatterlsey logo, Date of Manufacture YYYY, DN and flow arrow on body.
Installation Requirements:
R001
Expiry date:
30/04/2030
Model:
Fig. 825W (DN65 – DN150)
Approval Holder:
Hattersley
Company Name
Hattersley
Address
11-15 Epsilon Terrace West Road Ipswich Suffolk
Postcode
IP3 9FJ
Country
United Kingdom
Phone
0766465023
General Email
tturner@cranebsu.com

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 664 of 777

© WRAS 2025 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.