Plastic bodied push fit fittings for use with Shin Won Tube Co., Ltd. SWPE™ (LLDPE) tube, (not covered by the scope of this approval). Maximum working pressure 10.0 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

260102021

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

The SWPE™ (LLDPE) tube is not covered by the scope of this approval.

Size:

¼" push fit.

Marking:

ST, Stormtec logo and size on body.

Installation Requirements:

R001 R008

Expiry date:

31/01/2031

Model:

1A2400W702: 1/4"X1/4"X1/4" STEM BRANCH TEE, 1A2100W704: 1/4"X1/4" EQUAL ELBOW (DOUBLE O-RING), 1A4100W704: 1/4"X1/4"X1/4" EQUAL TEE (DOUBLE O-RING), 1A3100W704: 1/4"X1/4" EQUAL STRAIGHT (DOUBLE O-RING), 1A5100W704: 1/4"X1/4" STEM ELBOW (DOUBLE O-RING), 1A1900W702: 1/4"X1/4"X1/4" Y-FITTING, 1A0800W702: 1/4"X1/4" BULKHEAD CONNECTOR, 1A1040W702: 1/4"X1/4" 40mm LONG ELBOW, 1A0400W702: 1/4"X1/4"X1/4" EQUAL TEE, 1A7004W000: 1/4"OD X 1/4"OD NIPPLE ELBOW, 1A1200W000: 1/4” END PLUG, 1A0200W702: 1/4”X1/4” EQUAL ELBOW, 1A0300W702: 1/4”X1/4” EQUAL STRAIGHT, 1A0500W702: 1/4”X1/4” STEM ELBOW.

Approval Holder:

Stormtec Co., Ltd.

Company Name

Stormtec Co., Ltd.

Address

143, Hwagok-ro 68gil, Gangseo Seoul 07551

Country

Korea, Republic of

General Email

info@stormtec.co.kr

View All Listings by this Company

Manufacturer:

Stormtec Co., Ltd.

Company Name

Stormtec Co., Ltd.

Address

143, Hwagok-ro 68gil, Gangseo Seoul 07551

Country

Korea, Republic of

General Email

info@stormtec.co.kr

View All Listings by this Company

Range of bronze end feed fittings for use with copper pipe (manufactured to EN1057) 15mm - 54mm fittings have a maximum working pressure of 25.0 bar. 67mm - 108mm fittings have a maximum working pressure of 16.0 bar. Maximum operating temperature 100°C. Above ground use only.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

260304008

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model

Marking:

Kembla, Kembla logo and size on body.

Installation Requirements:

R001

Expiry date:

31/03/2031

Model:

LFMEN - MALE 90° ELBOW: LFMEN015: 15mm x ½". LFFEN - FEMALE 90° ELBOW: LFFEN015: 15mm x ½”, LFFEN02215: 22mm x ½”, LFFEN022: 22mm x ¾", LFFEN028: 28mm x 1”. LFFTE - FEMALE TEE: LFFTE02215: 22mm x ½", LFFTE03522: 35mm x ¾", LFFTE04222: 42mm x ¾", LFFTE04228: 42mm x 1”, LFFTE05422: 54mm x ¾", LFFTE05428: 54mm x 1”. LFFCE - FEMALE CROSS TEE: LFFCE03522: 35mm x ¾", LFFCE04222: 42mm x ¾", LFFCE04228: 42mm x 1”, LFFCE05422: 54mm x ¾”, LFFCE05428: 54mm x 1”. LFFCC - FEMALE COUPLER: LFFCC015: 15mm x ½", LFFCC022: 22mm x ¾”, LFFCC028: 28mm x 1”, LFFCC035: 35mm x 1-¼”, LFFCC042: 42mm x 1-½”, LFFCC054: 54mm x 2", LFFCC067: 67mm x 2-½”. LFMCC - MALE COUPLER: LFMCC015: 15mm x ½", LFMCC022: 22mm x ¾”, LFMCC028: 28mm x 1”, LFMCC035: 35mm x 1-¼”, LFMCC042: 42mm x 1-½”, LFMCC054: 54mm x 2”, LFMCC067: 67mm x 2-½”, LFMCC076: 76mm x 3”, LFMCC0108: 108mm x 4”. LFBTR - REDUCING COUPLING: LFBTR22: 22mm x ½".

Approval Holder:

Kembla (HK) Limited

Company Name

Kembla (HK) Limited

Country

China

Phone

+852 2833 9308

General Email

charles.tam@kembla.com.hk

View All Listings by this Company

Range of heat interface units with copper brazed, stainless-steel heat exchangers, providing heating and instantaneous hot water. The product incorporates an expansion vessel, a safety relief valve on the heating circuit set @ 3.0 bar and another on the cold-water inlet set @ 10.0 bar. Maximum working pressures: Primary: 16.0 bar Heating circuit: 2.5 bar Secondary: 9.5 bar Maximum operating temperatures: Primary: 90.0°C Heating circuit: 85.0°C Secondary: 60.0°C

Section:

1350 Heat Exchangers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP captive nut

Marking:

Taconova production, model code, primary, secondary and other technical information on label on expansion vessel

Installation Requirements:

R001

Expiry date:

31/03/2031

Model:

274.2401.696 - TacoTherm Dual ZEPTO SMART 10/26 without HM 274.2411.000P - TacoTherm Dual ZEPTO SMART 10/26 (PPR) 274.2411.696 - TacoTherm Dual ZEPTO SMART 10/26 274.2412.696 - TacoTherm Dual ZEPTO SMART 10/26 (WF) 274.2412.696MB - TacoTherm Dual ZEPTO SMART 10/26 (HM_ModBUS) 274.2412.696S - TacoTherm Dual ZEPTO SMART 10/26 (WF,DCWS) 274.2612.696C - TacoTherm Dual ZEPTO SMART 10/40 (WF,HI - FL) 274.2712.696CS - TacoTherm Dual ZEPTO SMART 10/50 (WF, HI - FL, DCWS) 274.2712.696S - TacoTherm Dual ZEPTO SMART 10/50 (WF,DCWS) 274.2912.696C - TacoTherm Dual ZEPTO SMART 10/70 (WF,HI - FL) 274.4412.696 - TacoTherm Dual ZEPTO SMART 16/26 (WF) 274.4711.696 - TacoTherm Dual ZEPTO SMART 16/50 (WF) 274.4912.696C - TacoTherm Dual ZEPTO SMART 16/70 (WF,HI - FL) 274.6401.696 - TacoTherm Dual ZEPTO SMART 26/26 without HM 274.6411.696 - TacoTherm Dual ZEPTO SMART 26/26 274.6412.696 - TacoTherm Dual ZEPTO SMART 26/26 (WF) 274.6612.696 - TacoTherm Dual ZEPTO SMART 26/40 (WF) 274.6712.696 - TacoTherm Dual ZEPTO SMART 26/50 (WF) 274.6712.696CS - TacoTherm Dual ZEPTO SMART (WF, HI - FL, DCWS) 274.6712.696S - TacoTherm Dual ZEPTO SMART 26/50 (WF, DCWS) 274.6912.696C - TacoTherm Dual ZEPTO SMART 26/70 (WF,HI - FL) 274.8611.696 - TacoTherm Dual ZEPTO SMART 40/40 (WF) 274.8912.696C - TacoTherm Dual ZEPTO SMART 40/70 (WF,HI - FL) First digit xx/xx is the number of plates of the heat exchanger for the heating distribution; second digit xx/xx is the number of plates of the heat exchanger for the drinking water heating. Models with a “9” (xxx.xx9x.xxx) instead of a “1” are exactly the same as the models with a 1 but will be supplied with the following extras: - Heatmeter - Flushing Bypass - Safety Valve Following the explanation of description in the product name: - Without HM = Without Heatmeter - PPR = Prepayment valve - WF = With a white Front plate - ModBUS = ModBUS Connectivity - DCWS = Domestic cold water supply - HI-FL = Other PICV (Pressure Independent Control Valve ) on primary side

Approval Holder:

Taconova UK Limited

Company Name

Taconova UK Limited

Address

Technology Centre | Advanced Manufacturing Park | Brunel Way Rotherham

Postcode

S60 5WG

Country

UK

View All Listings by this Company

Manufacturer:

Taconova Production s.r.o.

Company Name

Taconova Production s.r.o.

Address

Nova UL. C 627, CZ-38232 Velesin, Czech Republic

View All Listings by this Company

Range of ultrasonic water meters incorporating a brass or plastic (-C suffix models only) body. The inlet incorporates a plastic strainer. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

KDM Series: ¾" - 2½ BSP (M) (DN15 to DN50). VDE Series: ¾" - 1" BSP (M) (DN15 to DN20).

Marking:

CEM Water Meters on cap. CEM Water Meters, pressure, serial code, model code and other technical info on dial body. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/03/2031

Model:

KDM Series, Multijet, Dry Type KDM1, KDM2, KDM3, KDM4, KDM5, KDM6, KDM7, KDM8, KDM9, KDM10, KDM11 VDE Series Volumetric, Dry Type, Brass Body VD1E, VD2E, VD3E, VD4E, VD5E, VD7E Volumetric, Dry Type, Composite Body VD1E-C, VD2E-C, VD3E-C, VD4E-C, VD5E-C, VD7E-C

Approval Holder:

Yavuz Metal Sanayi Ve Ticaret A.Ş.

Company Name

Yavuz Metal Sanayi Ve Ticaret A.Ş.

Address

Organize Sanayi Bolgesi 2 Cadde No 4 Arsin Turkey

View All Listings by this Company

Range of pressure sensors with stainless steel bodies, EPDM ‘O’-ring and ceramic measuring cell. Maximum working pressure 25.0 bar. Cold water use only.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

B82.a-b-LF-e-f-g-h-i-j-k-l-m-n-o-p & B28/B38.ab-c-d-LF-g-h-i-j-k: ½” NPT (M) ¼” NPT inside (F). B82.a-b-CS-e-f-g-h-i-j-k-l-m-n-o-p & B28/B38.ab-c-d-CS-g-h-i-j-k: ½” BSP (M). B82.a-b-C5-e-f-g-h-i-j-k-l-m-n-o-p & & B28/B38.ab-c-d-C5-g-h-i-j-k: 1” BSP (M). B82.a-b-N7/B2/BC/B5/D8/N8/4G/D4/TP/CQ/5O/U8/U6/CH/PX/VE-e-f-g-h-i-j-k-l-m-n-o-p: DN25, DN50 and DN80 flanged.

Marking:

B82 models: VEGA on body. VEGA, model, serial number, date of manufacture (YYYY) and other technical information on adhesive label or data plate on body. B28/38 models: VEGA, serial number, date of manufacture (YYYY) and other technical information on body.

Installation Requirements:

R001

Expiry date:

31/03/2031

Model:

VEGABAR 82 range: B82.a-b-cd-e-f-g-h-i-j-k-l-m-n-o-p a = Scope: A - Europe I - worldwide V - Combination (Europe, world-wide) b = Approval: • X - for Ex-free area • W - Overfill protection (WHG, VLAREM) • M - Ship approval (DNV, BV, ABS, CCS, LR, RINA, ClassNK) • M - Ship approval (DNV, BV, ABS, CCS, LR, RINA, ClassNK) incl. MED • C - ATEX/UKEX II 1G, 1/2G, 2G Ex ia IIC T6 • U - ATEX/UKEX II 1G, 1/2G, 2G Ex ia IIC T6 + Overfill protection (WHG, VLAR EM) • O - ATEX/UKEX II 1G, 1/2G, 2G Ex ia IIC T6 + Ship approval • O - ATEX/UKEX II 1G, 1/2G, 2G Ex ia IIC T6 + ship approval incl. MED • H - ATEX/UKEX II 1G, 1/2G, 2G Ex ia IIC T6 + II 1D, 1/2D, 1/3D, Ext IIIC T* • T - ATEX/UKEX II 1G, 1/2G, 2G Ex ia IIC T6 + 1/2/-D Ex t IIIC IP67/I66 • E - ATEX/UKEX II 1/2G, 2G Ex d IIC T6 • Z - ATEX/UKEX II 1/2G, 2G Ex d IIC T6 + Overfill protection (WHG, VLAREM) • Q - ATEX/UKEX II 1/2G, 2G Ex d IIC T6 + Ship approval • Q - ATEX/UKEX II 1/2G, 2G Ex d IIC T6 + ship approval incl. MED • J - ATEX/UKEX II 1/2G, 2G Ex d IIC T6 + II 1D, 1/2D, 1/3D, 2D Ext IIIC T* • R - ATEX/UKEX II 1D, 1/2D, 1/3D, 2D Ext IIIC T* • S - ATEX/UKEX II 1/2/-D Ex t IIIC IP67/IP66 T* Da/Db/- • C - IEC Ex ia IIC T6 • U - IEC Ex ia IIC T6 + Overfill protection (WHG, VLAREM) • IEC Ex ia IIC T6 + Ship approval • H - IEC Ex ia IIC T6 + IEC Ex t IIIC T* • T - IEC Ex ia IIC T6 + IECEx Ex ia/ia/-, ia/tb ia IIC TX°C Da/Db/-, Da/Db • D - IEC Ex d ia IIC T6 • P - IEC Ex d ia IIC T6 + Ship approval • I - IEC Ex d ia IIC T6 + IEC Ex t IIIC T* • E - IEC Ex d IIC T6 • Q - IEC Ex d IIC T6 + Ship approval • J - IEC Ex d IIC T6 + IEC Ex t IIIC T* • R - IEC Ex t IIIC T* • S - IEC Ex ia/ia/-, ia/tb ia IIIC TX°C Da/Db/-, Da/Db • C - ATEX / IEC II 1G, 1/2G, 2G Ex ia IIC T6 / Ex ia IIC T6 • O - ATEX / IEC II 1G, 1/2G, 2G Ex ia IIC T6 / Ex ia IIC T6 + Ship approval • E - ATEX / IEC II 1/2G, 2G Ex d IIC / Ex d IIC T6 cd = Process fitting / Material (NOTE: PN rating relates to the flange and not the products maximum working pressure): • LF - Thread ½NPT, inside ¼NPT, ASME B1.20.1 / 316L • CS - Thread G½, ISO228-1, inside ø 11.4mm / Duplex (1.4462) • C5 - Thread G1, ISO228-1 / 316L • N7 - Flange DN25 PN40 Form C, DIN2501 / 316/316L • B2 - Flange DN50 PN40 Form C, DIN2501 / 316/316L • BC - Flange DN50 PN40 Form B, DIN2501 / 316/316L • B5 - Flange DN80 PN40 Form C, DIN2501 / 316/316L • D8 - Flange DN25 PN40 Form C, EN1092-1 / 316/316L • N8 - Flange DN25 PN40 Form B1, EN1092-1 / 316/316L • 4G - Flange DN25 PN40 Form B1, EN1092-1 / Duplex (1.4462) • D4 - Flange DN50 PN40 Form C, EN1092-1 / 316/316L • TP - Flange DN50 PN40 Form B1, EN1092-1 / 1.4435 (BN2) • CQ - Flange DN50 PN40 Form B1, EN1092-1 / 316/316L • 5O - Flange DN50 PN40 Form B1, EN1092-1 / Duplex (1.4462) • U8 - Flange DN50 PN40 Form B1, EN1092-1 / 1.4435 (BN2), (Ra<0.38μm) • U6 - Flange DN80 PN40 Form B1, EN1092-1 / 1.4435 (BN2), (Ra<0.38μm) • CH - Flange DN80 PN40 Form B1, EN1092-1 / 316/316L • PX - Flange DN80 PN40 Form B1, EN1092-1 / Duplex (1.4462) • VE - Flange DN80 PN40 Form C, EN1092-1 / 316/316L e = Sealing concept: • D – Double Seal f = Measuring cell seal / Process temperature • D - EPDM • E - EPDM g = Pressure • Relative pressure (measurement against atmosphere) • Absolute pressure (measurement against vacuum) • Relative pressure climate-compensated (measurement against atmosphere) h = Measuring range • Absolute: 0...+0.025 bar to 0...+25.0 bar • Relative: -1...0.0 bar to -1...+25.0 bar i = Accuracy class • Different accuracy classes from 0.05 % to 0.20 % j = Electronics • Z - Two-wire 4 ... 20 mA • H - Two-wire 4 ... 20 mA/HART • U - Four-wire Modbus (converter in second chamber) • A - Two-wire 4 ... 20 mA/HART with SIL qualification • P - Two-wire Profibus PA • F - Two-wire Foundation Fieldbus • S - Secondary electronics for electronic differential pressure • T - Secondary electronics for electronic differential pressure with SIL qualification k = Supplementary electronics • X - without • Z - Additional current output 4 ... 20 mA l = Housing • K - Plastic single chamber • R - Plastic double chamber • A - Aluminium single chamber • D - Aluminium double chamber • V - Stainless steel single chamber (precision casting) • W - Stainless steel double chamber (precision casting) • 8 - Stainless steel single chamber (electropolished) m = Housing version / Protection I - compact / IP66/IP67; TYPE 4X • D - compact / IP66/IP68 (0.2bar); TYPE 6P • P - compact / IP66/IP67; TYPE 4X with M12x1 for VEGADIS 81 • N - compact / IP66/IP68 (1bar); TYPE 6P • M - compact / IP67/IP69 TYPE 4X • A - Axial cable outlet IP68 (PUR) with external housing / IP66/IP67; TYPE 4X • C - Lateral cable outlet IP68 (PUR) with external housing / IP66/IP67; TYPE 4X • K - Axial cable outlet IP68 (PE) with external housing / IP66/IP67; TYPE 4X • L - Lateral cable outlet IP68 (PE) with external housing / IP66/IP67; TYPE 4X • T - Cable outlet / IP66/IP67 TYPE 4X n = Cable entry / Connection • M - M20x1.5 / Cable gland PA black (ø5-9mm), standard • S - M20x1.5 / Cable gland PA black (ø6-12mm) • T - M20x1.5 / Cable gland PA black (ø10-14mm) • K - M20x1.5 / Cable gland PA blue (ø5-9mm) • U - M20x1.5 / Cable gland PA blue (ø6-12mm) • V - M20x1.5 / Cable gland PA blue (ø10-14mm) • L - M20x1.5 / Cable gland stainless steel (ø7-12mm) • O - M20x1.5 / Cable gland brass nickel-plated (ø6-12mm) • 2 - M20x1.5 / Cable gland brass nickel-plated (ø5-9mm) • 9 - M20x1.5 / Cable gland brass nickel-plated SFLU10-M (ø6-12mm) • D - M20x1.5 / Blind plug • 1 - M20x1.5 / without • 6 - M20x1.5 / Cable gland brass nickel-plated; for shielded cable (ø9-13mm) • N - ½NPT / Blind plug • Q - ½NPT / without • J - ½NPT / Cable gland PA black (ø5-9mm) • 8 - ½NPT / Cable gland brass nickel-plated; for reinforced cable (ø9-13mm) • P - ½NPT / Cable gland brass nickel-plated (ø6-12mm) • C - M20x1.5 / Plug connector M12x1, assignment A • B - M20x1.5 / Plug connector M12x1, assignment B • R - M20x1.5 / Plug connector M12x1, assignment C • I - M20x1.5 / Plug connector acc. to ISO4400 • F - M20x1.5 / Plug connector Harting HAN 7D (straight) • G - M20x1.5 / Plug connector Harting HAN 7D (bent) • H - M20x1.5 / Plug connector Harting HAN 8D (straight) • W - M20x1.5 / Plug connector Harting HAN 8D (bent) • Z - ½NPT / Plug 7/8NPT o = Display/adjustment module PLICSCOM • X - without • A - mounted • F - without; lid with inspection window • H - mounted, with heating • B - laterally mounted • K - mounted; with Bluetooth, magnetic pen operation • L - laterally mounted; with Bluetooth, magnetic pen operation p = Certificates • M – Yes o Foodstuff/Pharmaceutical certificate: ▪ WRAS VEGABAR 28 range: B28.ab-c-d-ef-g-h-i-j-k ab = Explosion protection: • XX - for Ex-free area (CE, UKCA, RCM, c-UL-us) • VA - ATEX/UKEX; Gas, increased safety, Zone 2: II 3G Ex ec IIC T4 Gc • VC - ATEX/UKEX/IEC/c-UL-us; Gas, intrinsic safety, Zone 0, 0/1, 1, 2 (Class I Division 1, 2) • VR - ATEX/IEC/c-UL-us; Gas, intrinsic safety (Class I Division 1,2), Zone 0, 0/1, 1, 2 + dust, protection by enclosure, Zone 20, 20/21, 21 (Class II Division 1) (in preparation: UKEX) • XX - for Ex-free area (EAC) c = Ship approval: • S - with (DNV, LR, ABS, RINA, CCS, NK, BV) • X - without d = Foodstuff/Pharmaceutical certificate • W - with (WRAS) ef = Process fitting / Material: • LF - Thread ½NPT, inside ¼NPT, ASME B1.20.1 / 316L • CS - Thread G½, ISO228-1, inside ø 11.4 mm / Duplex (1.4462) • C5 - Thread G1, ISO228-1; front-flush / 316L g = Measuring cell seal / Process temperature: • D - EPDM h = Measuring range: • Different measuring ranges – both absolute and relative. • Starting from 0…+0.1 bar up to 0…+25.0 bar i = Electrical connection / Protection: • M - M12x1 plastic/ IP66/IP67/IP69 • E - M12x1 stainless steel / IP66/IP67/IP69 • S - 4-pole plug connection ISO4400 M16 / IP65 • K - 4-pole plug connection with hinged cover ISO4400 / IP 65 • T - with direct cable outlet / IP66/IP68 (0.5bar) • V - with direct cable outlet of stainless steel / IP66/68 (0.5bar) j = Electronics: • Z - Two-wire: 4...20 mA • C - Three-wire: transistor, 4...20 mA (active) • A - Three-wire: IO-Link, transistor, 4...20 mA (active) k = Sensor setting via smartphone and VEGA Tools app: • B - with • X - without VEGABAR 38 range: B38.ab-c-d-ef-g-h-i-j-k ab = Explosion protection: • XX - for Ex-free area (CE, UKCA, RCM, c-UL-us) • VC - ATEX/UKEX/IEC/c-UL-us; Gas, intrinsic safety, Zone 0, 0/1, 1, 2 (Class I Division 1, 2) • XX - for Ex-free area (EAC) c = Ship approval: • S - with (DNV, LR, ABS, RINA, CCS, NK, BV) • X - without d = Foodstuff/Pharmaceutical certificate • W - with (WRAS) ef = Process fitting / Material: • LF - Thread ½NPT, inside ¼NPT, ASME B1.20.1 / 316L • CS - Thread G½, ISO228-1, inside ø 11.4 mm / Duplex (1.4462) • C5 - Thread G1, ISO228-1; front-flush / 316L g = Measuring cell seal / Process temperature: • D - EPDM h = Measuring range: • Different measuring ranges – both absolute and relative. • Starting from 0…+0.1 bar up to 0…+25.0 bar i = Electrical connection / Protection: • M - M12x1 / IP66/IP67 • S - 4-pole plug connection ISO4400 M16 / IP65 • K - 4-pole plug connection with hinged cover ISO4400 / IP 65 j = Electronics: • Z - Two-wire: 4...20 mA • C - Three-wire: transistor, 4...20 mA (active) • A - Three-wire: IO-Link, transistor, 4...20 mA (active) k = Sensor setting via smartphone and VEGA Tools app: • B - with • X - without

Approval Holder:

VEGA Grieshaber KG

Company Name

VEGA Grieshaber KG

Address

Am Hohenstein 113 Schiltach

Postcode

77761

Country

Germany

General Email

info.de@vega.com

View All Listings by this Company

Range of pressure transmitters with stainless steel bodies. The DST P140 G1/4 A (with O-ring) model also incorporates an EPDM ‘O’-ring. Maximum working pressure 50.0 bar. Maximum operating temperatures: DST P140 G1/4 A (with O-ring): 85°C, All other models: 90°C.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

260302024

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

This approval covers the following manufacturing locations: Danfoss Tianjin Ltd. (China) & Danfoss Industries S.A. de C.V. (Mexico).

Size:

DST P100 1/8-27 NPT: ⅛” NPT (M), DST P110 1/4-18 NPT: ¼” NPT (M), DST P140 1/2-14 NPT: ½” NPT (M), DST P100 R1/4: ¼” BSPT (M), DST P110 G1/2: ½” BSP (M), DST P140 G1/4A: ¼” BSP (M), DST P140 1/4-18 NPT: ¼” NPT (M), DST P140 G1/2: ½” BSP (M), DST P140 R1/4: ¼” BSPT (M), DST P146 1/4-18 NPT: ¼” NPT (M), DST P146 G1/2: ½” BSP (M), DST P140 G1/4 A (with O-ring): ¼” BSP (M).

Marking:

Danfoss, model and technical information on body

Installation Requirements:

R001

Expiry date:

31/03/2031

Model:

DST P100 1/8-27 NPT, DST P110 1/4-18 NPT, DST P140 1/2-14 NPT, DST P100 R1/4, DST P110 G1/2, DST P140 G1/4A, DST P140 1/4-18 NPT, DST P140 G1/2, DST P140 R1/4, DST P146 1/4-18 NPT, DST P146 G1/2, DST P140 G1/4 A (with O-ring).

Approval Holder:

Danfoss A/S

Company Name

Danfoss A/S

Address

Nordborgvej 81 6430 Nordborg

Country

Denmark

Phone

+74 88 22 22

General Email

danfoss@danfoss.com

View All Listings by this Company

Range of flexible joints incorporating an EPDM (inner & outer) joint with a steel reinforcing ring and two carbon steel flanges. Maximum operating pressure 16.0 bar. Maximum operating temperature 65°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN32 DN40 DN50 DN65 DN80 DN100 DN125 DN150

Marking:

CORE (Smith Brothers Stores Ltd brand) model, DN, PN, date of manufacture, WRAS metal plate riveted on to flange approved & Made in China on body.

Installation Requirements:

R001

Expiry date:

31/10/2026

Model:

FB16032W FB16040W FB16050W FB16065W FB16080W FB16100W FB16125W FB16150W

Product Images

Approval Holder:

Smith Brothers Stores Limited

Company Name

Smith Brothers Stores Limited

Address

Unit V2 Winchester Avenue, Blaby, Leicester

Postcode

LE8 4GZ

Phone

0116 222 7330

General Email

kel.phillips@sbs.co.uk

View All Listings by this Company

Range of pressure transmitters with stainless steel bodies. Maximum working pressure 50.0 bar. Maximum operating temperatures 90°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Press.Tr. ISP40: ½” BSP (M), Press.Tr.ISP44: 1/4-18 NPT: ¼” NPT (M), Press.Tr.ISP44: ½” BSP (M),

Marking:

Grundfos & logo, size, pressure & model and technical information on body

Installation Requirements:

R001

Expiry date:

31/03/2031

Model:

Press.Tr. ISP40 & Press.Tr. ISP44

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of cast iron (blue epoxy coated) (G versions only) or stainless steel (all other versions - F, N, R, T) vertical multistage pumps with stainless steel impellers, shaft and outer sleeve. Maximum working pressures: 16 bar, 25 bar and 40 bar. Oval flanges - Body type ‘T’ (1SV-3SV, 5SV, 10SV, 15SV-22SV) - 16 bar. Round flanges - Body type ‘R’ (1SV-3SV, 5SV, 10SV, 15SV-22SV) - 25 bar. Round flanges - Body type ‘F’ (1SV-3SV) - 25 bar. Round flanges - Body type ‘N’ (10SV) - 25 bar. Round flanges - Body type ‘N’ (66SV-92SV) - 16 bar. Round flanges - Body type ‘G’ (33SV, 46SV) - 40 bar. Round flanges - Body type ‘G’ (33SV, 46SV, 66SV-92SV, 125SV) - 16 bar. Round flanges - Body type ‘G’ (125SV) - 25 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

260302709

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Flanged inlet and outlet: (T versions have 2 bolt oval flanges). (F, G, N, R versions have round flanges). 1SV-3SV: DN25. 5SV: DN32. 10SV: DN40. 15-22SV: DN50. 33SV: DN65. 46SV: DN80. 66SV-92SV: DN100. 125SV: DN125.

Marking:

Lowara logo, Xylem, pressure and technical data on data plate on body. Lowara and WRAS on adhesive label on body DN80 46SV_10G_055 Lowara logo, Xylem, pressure and technical data on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/03/2031

Model:

1SV, 3SV, 5SV, 10SV, 15SV, 22SV, 33SV, 46SV, 66SV, 92SV & 125SV series pumps. Example code: 10SV_05F_022_ _T/D Where: • 10 = flow rate in m³/h (1, 3, 5, 10, 15, 22, 33, 46, 66, 92, 125). • SV = series name. • _ = Motor operation. blank = standard version, H = equipped with Hydrovar, E = e-SM (1SV-22SV models only) or a single letter denoting the type of the variable speed drive model used. • 05 = 2 digits for number of impellers [05 = 5 impellers], can also be represented as: X/1A or X/2A, where X = number of impellers: 1-13, /1 or /2 = 1 or 2 impellers with outer diameter reduced. A = reduction type. • F = body type: F, T, R, G or N. 1SV-25SV models F - AISI 304, round flanges, T - AISI 304, oval flanges, R - AISI 304, discharge port above suction, round flanges, N - AISI 316, round flanges. 33-125SV models G - AISI 304/Cast Iron, round flanges. N - AISI 316, round flanges, • _ = blank (null) to denote standard version. • 022 = Rated motor power - 3 digits (kW x 10). • _ = blank (null) to denote 2-pole, 4 = 4 pole. • _ = blank (null) to denote 50Hz, 6 = 60Hz, 0 = e-SM (1SV-22SV models only). • T = Three-phase or M to denote single-phase or Null = standard version. • /D = relates to supply voltage and can also be blank, /2, /4 or /4/2.

Approval Holder:

Xylem Service Italia S.r.l

Company Name

Xylem Service Italia S.r.l

Address

Via Vittorio Lombardi 14, 36075 Montecchio Maggiore-Alte Ceccato VI, Vicenza

Country

Italy

Phone

0039 0444 707111

View All Listings by this Company

Range of electronic booster pumps with variable speed, incorporating stainless-steel bodies, impellers and shaft, EPDM gaskets and seals and an expansion vessel on the outlet. The pumps incorporate a drain port. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

260304701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

The discharge from the drain port must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.

Size:

PBI-L2 prefix models: 1” BSP (F) x 1” BSP (F), PBI-L4 prefix models: 1¼” BSP (F) x 1” BSP (F), PBI-L8 prefix models: 1½” BSP (F) x 1¼” BSP (F).

Marking:

Wilo, model no., date of manufacture (YYWW) and other technical information on data label on body. Wilo on control box.

Installation Requirements:

R001 R415

Expiry date:

31/03/2031

Model:

PBI-L series pumps: PBI-L203MA/P, PBI-L204MA/P, PBI-L205MA/P, PBI-L402MA/P, PBI-L403MA/P, PBI-L404MA/P, PBI-L405MA/P, PBI-L802MA/P, PBI-L803MA/P, PBI-L203EA/P, PBI-L204EA/P, PBI-L205EA/P, PBI-L402EA/P, PBI-L403EA/P, PBI-L404EA/P, PBI-L405EA/P, PBI-L802EA/P, PBI-L803EA/P, PBI-L203MA/P/S, PBI-L204MA/P/S, PBI-L205MA/P/S, PBI-L402MA/P/S, PBI-L403MA/P/S, PBI-L404MA/P/S, PBI-L405MA/P/S, PBI-L802MA/P/S, PBI-L803MA/P/S, PBI-L203EA/P/S, PBI-L204EA/P/S, PBI-L205EA/P/S, PBI-L402EA/P/S, PBI-L403EA/P/S, PBI-L404EA/P/S, PBI-L405EA/P/S, PBI-L802EA/P/S, PBI-L803EA/P/S. Where: PBI-L = series name (Electronic boosting pump variable speed pump (Inverter Pump)) 2, 4 or 8 = Rated flow capacity in m³/h. 2, 3, 4 or 5 = Number of Impellers. M or E = Power. M: 60Hz 220V/230V 1phase, E: 50Hz 220V/230V 1phase. [blank] or A = Mode. [blank]: Non-automatic models, A: Models with pressure sensor and inverter that are responsible for automatic mode, allowing the pump to operate at the corresponding RPM to maintain the set operating pressure. P = Product Category. P: Complete product. [blank] or S = Accessories. [blank]: No accessories, S: Sun cover.

Approval Holder:

WILO Pumps Ltd.

Company Name

WILO Pumps Ltd.

Address

46, Mieumsandan 1-ro, Gangseo-gu, Busan, Republic of Korea, 46730

View All Listings by this Company

Manufacturer:

WILO Pumps Ltd.

Company Name

WILO Pumps Ltd.

Address

46, Mieumsandan 1-ro, Gangseo-gu, Busan, Republic of Korea, 46730

View All Listings by this Company