Range of “Effast” ABS fittings for use with ABS pipe complying with BS EN 5391-2006. Maximum working pressure: 15 Bar. Maximum operating temperature: 23°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2306055

Size:

20, 25, 32, 40, 50, 63, 75, 90 OR 110mm solvent weld (SW) connection (Model codes with XXXX is replaced with 0200 for 20mm, or 1100 for 110mm SW etc.) ½”, ¾”, 1”, 1.1/4”, 1.1/2”, 2”, 3” or 4” BSP (M) or (F) connections. (Model codes with a Y on the end is replaced with B for ½”, C for ¾”, D for 1”, E for 1.1/4”, F for 1.1/2”, G for 2”, H for 3” and I for 4” BSP).

Marking:

Effast and size on body.

Installation Requirements:

R001

Expiry date:

30/06/2028

Model:

RAAGOAXXXX - Elbow 90° BS (20-110 SW), RAAGYAXXXX - Elbow 45° BS (20-110 SW), RAAMAAXXXX - Socket BS (20-110 SW), RAATIAXXXX - tee 90° BS (20-110 SW), RAACAAXXXX - Cap BS (25-110 SW), RAACUAXXXX - Bend 90° (25-110 SW,) RAABOAXXXX - Union BS (20-110 SW), RAAQRAXXXX - Serrated Face Stub Flange (32-110 SW), RAAFNAXXXX - Fixed Flange ISO (20-110 SW), RAAFFAXXXX - Fixed Flange BS (50-110 SW), RAAFCAXXXX - Blanking Flange ISO (63-110 SW), RAARCAXXXB - Reducing Bush BS (25-32 SW), RAARCAXXXC - Reducing Bush BS (32 SW), RAARCAXXXD - Reducing Bush BS (40-63 SW), RAARCAXXXE - Reducing Bush BS (50-63 SW), RAARCAXXXF - Reducing Bush BS (63-90 SW), RAARCAXXXG - Reducing Bush BS (75-110 SW), RAARCAXXXH - Reducing Bush BS (90 SW), RAARCAXXXI - Reducing Bush BS (110 SW), RAARCAXXXL - Reducing Bush BS (140-160 SW), RCAGOCXXXY - Elbow 90° BS/BSPP (20-110 SW x ½” to 4” BSP (F)), RCATICXXXY - Tee 90° BS/BSPP (20-110 SW (x2) x ½” to 4” BSP (F)), RCAMACXXXY - Socket BS/BSPP (20-110 SW x ½” to 4” BSP (F)), RCAAFCXXXY - Female Adaptor BS/BSPP (20-63 SW x ½” to 2” BSP (F)), RCAAMCXXXY - Male Adaptor BS/PSBB (20-110 SW x ½” to 4” BSP (M)), RCARCCXXXY - Reducing Bush BS/BSPP (20-32 SW x ½” to 1” BSP (F)),

Product Images

Approval Holder:

Polypipe Italia s.r.l.

Company Name

Polypipe Italia s.r.l.

Address

Loc. Pianmercato 5C-D-H Cicagna

Country

Italy

General Email

Christopher.sanguineti@effast.com

View All Listings by this Company

Manufacturer:

Polypipe Italia s.r.l.

Company Name

Polypipe Italia s.r.l.

Address

Loc. Pianmercato 5C-D-H Cicagna

Country

Italy

General Email

Christopher.sanguineti@effast.com

View All Listings by this Company

Range of DZR brass push fit fittings for use with copper pipe (manufactured to BS EN 1057), PB pipe (manufactured to BS7291-2) and PEX pipe (manufactured to BS7291-3). Maximum working pressures and operating temperatures: 12.5 @ 20°C, and 3.0 bar @ 92ºC.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2307024

Size:

See model.

Marking:

John Guest logo (“JG”) (brand of Reliance Worldwide Corporation (UK) Ltd.) and CR on body.

Installation Requirements:

R001

Expiry date:

31/07/2028

Model:

Straight Adaptors: MW011504N: 15mm x ½” BSPT (M), MW012206N: 22mm x ¾” BSPT (M), MW012808N: 28mm x 1” BSPT (M), MW012818N: 28mm x 1” BSP (M). Male Couplers: 10MC(1/2): 10mm x ½” BSP (M), 15MC(1/2): 15mm x ½” BSP (M), 15MC(1/2)P: 15mm x ½” BSP (M), 22MC(3/4): 22mm x ¾” BSP (M), 22MC(3/4)P: 22mm x ¾” BSP (M). Female Adaptors: MW451514N: 15mm x ½” BSP (F), MW452216N: 22mm x ¾” BSP (F), 22CFA: 22mm x 1” BSP (F), 22CFAP: 22mm x 1” BSP (F). Back Plate Elbows: 15WB: 15mm x ½” BSP (F), 15WBP: 15mm x ½” BSP (F), 15WB2: 15mm x ½” BSP (F), 22WB: 22mm x ¾” BSP (F). Stem Adaptors: MW051504N: 15mm x ½” BSPT (M), MW052206N: 22mm x ¾” BSPT (M), MW052818N: 28mm x 1" BSP (M), MW501514N: 15mm x ½” BSP (F), MW502216N: 22mm x ¾” BSP (F). Male Adaptors: 22CMA: 22mm x 1” BSP (M), 22CMAP: 22mm x 1” BSP (M).

Product Images

Approval Holder:

RELIANCE WORLDWIDE CORPORATION (UK) LTD

Company Name

RELIANCE WORLDWIDE CORPORATION (UK) LTD

Address

HORTON ROAD WEST DRAYTON

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Range of press fittings with a stainless steel body and EPDM ‘O’ rings for use with stainless steel 316L pipe manufactured to EN10312. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2101368

Size:

see model

Marking:

Ducco and size on body.

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

Equal Coupling DS2001-15 15mm Equal Coupling DS2001-18 18mm Equal Coupling DS2001-22 22mm Equal Coupling DS2001-28 28mm Equal Coupling DS2001-35 35mm Equal Coupling DS2001-42 42mm Equal Coupling DS2001-54 54mm Adjustable Coupling DS2002-15 15mm Adjustable Coupling DS2002-18 18mm Adjustable Coupling DS2002-22 22mm Adjustable Coupling DS2002-28 28mm Adjustable Coupling DS2002-35 35mm Adjustable Coupling DS2002-42 42mm Adjustable Coupling DS2002-54 54mm 90D Equal Elbow DS2003-15 15mm 90D Equal Elbow DS2003-18 18mm 90D Equal Elbow DS2003-22 22mm 90D Equal Elbow DS2003-28 28mm 90D Equal Elbow DS2003-35 35mm 90D Equal Elbow DS2003-42 42mm 90D Equal Elbow DS2003-54 54mm 90D Plain Elbow-B DS2004-15 15mm 90D Plain Elbow-B DS2004-18 18mm 90D Plain Elbow-B DS2004-22 22mm 90D Plain Elbow-B DS2004-28 28mm 90D Plain Elbow-B DS2004-35 35mm 90D Plain Elbow-B DS2004-42 42mm 90D Plain Elbow-B DS2004-54 54mm 45D Equal Elbow DS2005-15 15mm 45D Equal Elbow DS2005-18 18mm 45D Equal Elbow DS2005-22 22mm 45D Equal Elbow DS2005-28 28mm 45D Equal Elbow DS2005-35 35mm 45D Equal Elbow DS2005-42 42mm 45D Equal Elbow DS2005-54 54mm 45D Plain Elbow-B DS2006-15 15mm 45D Plain Elbow-B DS2006-18 18mm 45D Plain Elbow-B DS2006-22 22mm 45D Plain Elbow-B DS2006-28 28mm 45D Plain Elbow-B DS2006-35 35mm 45D Plain Elbow-B DS2006-42 42mm 45D Plain Elbow-B DS2006-54 54mm Equal Tee DS2007-15 15mm Equal Tee DS2007-18 18mm Equal Tee DS2007-22 22mm Equal Tee DS2007-28 28mm Equal Tee DS2007-35 35mm Equal Tee DS2007-42 42mm Equal Tee DS2007-54 54mm Reducing Tee DS2008-18*15 18mmx15mm Reducing Tee DS2008-22*15 22mmx15mm Reducing Tee DS2008-22*18 22mmx18mm Reducing Tee DS2008-28*22 28mmx22mm Reducing Tee DS2008-35*22 35mmx22mm Reducing Tee DS2008-35*28 35mmx28mm Reducing Tee DS2008-42*28 42mmx28mm Reducing Tee DS2008-42*35 42mmx35mm Reducing Tee DS2008-54*28 54mmx28mm Reducing Tee DS2008-54*35 54mmx35mm Reducing Tee DS2008-54*42 54mmx42mm Female Coupling DS2009-15*Rp1/2 15mmxRp1/2" Female Coupling DS2009-22*Rp3/4 22mmxRp3/4" Female Coupling DS2009-28*Rp1 28mmxRp1" Female Coupling DS2009-35*Rp1 1/4 35mmxRp1-1/4" Female Coupling DS2009-42*Rp1 1/2 42mmxRp1-1/2" Female Coupling DS2009-54*Rp2 54mmxRp2" Rotatable Coupling DS2010-15*G1/2 15mmxG1/2" Rotatable Coupling DS2010-22*G3/4 22mmxG3/4" Rotatable Coupling DS2010-28*G1 28mmxG1" Rotatable Coupling DS2010-35*G1 1/4 35mmxG1-1/4" Item Description Secondary Code Size (OD) Rotatable Coupling DS2010-42*G1 1/2 42mmxG1-1/2" Rotatable Coupling DS2010-54*G2 54mmxG2" Male Coupling DS2011-15*R1/2 15mmxR1/2" Male Coupling DS2011-22*R3/4 22mmxR3/4" Male Coupling DS2011-28*R1 28mmxR1" Male Coupling DS2011-35*R1 1/4 35mmxR1-1/4" Male Coupling DS2011-42*R1 1/2 42mmxR1-1/2" Male Coupling DS2011-54*R2 54mmxR2" Female Elbow DS2012-15*Rp1/2 15mmxRp1/2" Female Elbow DS2012-22*Rp3/4 22mmxRp3/4" Female Elbow DS2012-28*Rp1 28mmxRp1" Female Elbow DS2012-35*Rp1 1/4 35mmxRp1-1/4" Female Elbow DS2012-42*Rp1 1/2 42mmxRp1-1/2" Female Elbow DS2012-54*Rp2 54mmxRp2" Male Elbow DS2013-15*R1/2 15mmxR1/2" Male Elbow DS2013-22*R3/4 22mmxR3/4" Male Elbow DS2013-28*R1 28mmxR1" Male Elbow DS2013-35*R1 1/4 35mmxR1-1/4" Male Elbow DS2013-42*R1 1/2 42mmxR1-1/2" Male Elbow DS2013-54*R2 54mmxR2" Female Tee DS2014-15*Rp1/2 15mmxRp1/2" Female Tee DS2014-22*Rp3/4 22mmxRp3/4" Female Tee DS2014-28*Rp1 28mmxRp1" Female Tee DS2014-35*Rp1 1/4 35mmxRp1-1/4" Female Tee DS2014-42*Rp1 1/2 42mmxRp1-1/2" Female Tee DS2014-54*Rp2 54mmxRp2" Male Tee DS2015-15*R1/2 15mmxR1/2" Male Tee DS2015-22*R3/4 22mmxR3/4" Male Tee DS2015-28*R1 28mmxR1" Male Tee DS2015-35*R1 1/4 35mmxR1-1/4" Male Tee DS2015-42*R1 1/2 42mmxR1-1/2" Male Tee DS2015-54*R2 54mmxR2" Reducer-A DS2016-18*15 18mmx15mm Reducer-A DS2016-22*18 22mmx18mm Reducer-A DS2016-28*22 28mmx22mm Reducer-A DS2016-35*28 35mmx28mm Reducer-A DS2016-42*35 42mmx35mm Reducer-A DS2016-54*42 54mmx42mm Reducer Coupling-B DS20107-18*15 18mmx15mm Reducer Coupling-B DS20107-22*18 22mmx18mm Reducer Coupling-B DS20107-28*22 28mmx22mm Reducer Coupling-B DS20107-35*28 35mmx28mm Reducer Coupling-B DS20107-42*35 42mmx35mm Reducer Coupling-B DS20107-54*42 54mmx42mm

Approval Holder:

Gentler Industrial co., Ltd

Company Name

Gentler Industrial co., Ltd

Address

1F no 986

View All Listings by this Company

Range of Conex >B< press fittings incorporating copper & brass bodies for use with copper tube (manufactured to EN1057). Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2309059

Size:

See models. Note, all sizes in XXmm are Press fit.

Marking:

Conex (>B<) logo and size on body.

Installation Requirements:

R001

Expiry date:

30/09/2028

Model:

P4001G – 90° Bend with male thread P4001G01503000 – 15mm X 3/8” BSP (M) P4001G01504000 – 15mm X ½” BSP (M) P4001G02206000 – 22mm X ¾” BSP (M) P4001G02808000 – 28mm X 1” BSP (M) P4001G03510000 – 35mm X 1.1/4” BSP (M) P4001G04212000 – 42mm X 1.1/2” BSP (M) P4001G05416000 – 54mm X 2” BSP (M) P4090G – Elbow with female thread P4090G01503000 – 15mm X 3/8” BSP (F) P4090G01504000 – 15mm X ½” BSP (F) P4090G01606000 – 15mm X ¾” BSP (F) P4090G02204000 – 22mm X ½” BSP (F) P4090G02206000 – 22mm X ¾” BSP (F) P4090G02208000 – 22mm X 1” BSP (F) P4090G02808000 – 28mm X 1” BSP (F) P4090G03510000 – 35mm X 1.1/4” BSP (F) P4090G04212000 – 42mm X 1.1/2” BSP (F) P4090G05416000 – 54mm X 2” BSP (F) P4130G – Tee with female threaded branch P4130G01503015 – 15mm X 3/8” BSP (F) X 15mm P4130G01504015 – 15mm X ½” BSP (F) X 15mm P4130G02204022 – 22mm X ½” BSP (F) X 22mm P4130G02206022 – 22mm X ¾” BSP (F) X 22mm P4130G02804028 – 28mm X ½” BSP (F) X 28mm P4130G02806028 – 28mm X ¾” BSP (F) X 28mm P4130G03504035 – 35mm X ½” BSP (F) X 35mm P4130G04204042 – 42mm X ½” BSP (F) X 42mm P4130G05404054 – 54mm X ½” BSP (F) X 54mm P4132G – Tee with male threaded branch P4132G01504015 – 15mm X ½” BSP (M) X 15mm P4132G02204022 – 22mm X ½” BSP (M) X 22mm P4132G02206022 – 22mm X ¾” BSP (M) X 22mm P4132G02804028 – 28mm X ½” BSP (M) X 28mm P4132G02806028 – 28mm X ¾” BSP (M) X 28mm P4132G03504035 – 35mm X ½” BSP (M) X 35mm P4132G04204042 – 42mm X ½” BSP (M) X 42mm P4132G05404054 – 54mm X ½” BSP (M) X 54mm P4243G – Male straight connector body P4243G01503000 – 15mm x 3/8” BSP (M) P4243G01504000 – 15mm x ½” BSP (M) P4243G01506000 – 15mm x ¾” BSP (M) P4243G02204000 – 22mm x ½” BSP (M) P4243G02206000 – 22mm x ¾” BSP (M) P4243G02208000 – 22mm x 1” BSP (M) P4243G02806000 – 28mm x ¾” BSP (M) P4243G02808000 – 28mm x 1” BSP (M) P4243G02810000 – 28mm x 1.1/4” BSP (M) P4243G03508000 – 35mm x 1” BSP (M) P4243G03510000 – 35mm x 1.1/4” BSP (M) P4243G03512000 – 35mm x 1.1/2” BSP (M) P4243G04210000 – 42mm x 1.1/4” BSP (M) P4243G04212000 – 42mm x 1.1/2” BSP (M) P4243G05412000 – 54mm x 1.1/2” BSP (M) P4243G05416000 – 54mm x 2” BSP (M) P4270G – Female straight connector body P4270G01503000 – 15mm X 3/8” BSP (F) P4270G01504000 – 15mm X 1/2” BSP (F) P4270G01506000 – 15mm X 3/4” BSP (F) P4270G02204000 – 22mm X ½” BSP (F) P4270G02206000 – 22mm X ¾” BSP (F) P4270G02208000 – 22mm X 1” BSP (F) P4270G02210000 – 22mm X 1.1/4” BSP (F) P4270G02806000 – 28mm X ¾” BSP (F) P4270G02808000 – 28mm X 1” BSP (F) P4270G02810000 – 28mm X 1.1/4” BSP (F) P4270G03508000 – 35mm X 1” BSP (F) P4270G03510000 – 35mm X 1.1/4” BSP (F) P4270G04210000 – 42mm X 1.1/4” BSP (F) P4270G04212000 – 42mm X 1.1/2” BSP (F) P4270G05416000 – 54mm X 2” BSP (F) P4275 – Slip Couler P4275 015000000 – 15mm P4275 022000000 – 22mm P4275 028000000 – 28mm P4275 035000000 – 35mm P4275 042000000 – 42mm P4275 054000000 – 54mm P4280G – Male Adaptor P4280G01504000 – 15mm X ½” BSP (M) P4280G02204000 – 22mm X ½” BSP (M) P4280G02206000 – 22mm X ¾” BSP (M) P4280G02808000 – 28mm X 1” BSP (M) P4280G03510000 – 35mm X 1.1/4” BSP (M) P4281G – Female Adaptor P4281G01504000 – 15mm X ½” BSP (F) P4281G02204000 – 22mm X ½” BSP (F) P4281G02206000 – 22mm X ¾” BSP (F) P4281G02808000 – 28mm X 1” BSP (F) P4281G03508000 – 35mm X 1” BSP (F) P4355 – Flat Face Connector P4355 01504000 – 15mm X ½” BSP (F) P4355 01506000 – 15mm X ¾” BSP (F) P4355 02206000 – 22mm X ¾” BSP (F) P4355 02208000 – 22mm X 1” BSP (F) P4355 02810000 – 28mm X 1.1/4” BSP (F) P4355 03512000 – 35mm X 1.1/2” BSP (F) P4355 04214000 – 35mm X 1.3/4” BSP (F) P4355 05419000 – 54mm X 2.3/8” BSP (F) P4471G – WallPlate Elbow P4471G01504000 – 15mm X ½” BSP (F) P4471G02206000 – 22mm X ¾” BSP (F) P5001 – 90° Street Bend P5001 015000000 – 15mm P5001 022000000 – 22mm P5001 028000000 – 28mm P5001 035000000 – 35mm P5001 042000000 – 42mm P5001 054000000 – 54mm P5002 – 90° Bend P5002 015000000 – 15mm P5002 022000000 – 22mm P5002 028000000 – 28mm P5002 035000000 – 35mm P5002 042000000 – 42mm P5002 054000000 – 54mm P5002L – 90° Bend Long P5002L015000000 – 15mm P5002L022000000 – 22mm P5002L028000000 – 28mm P5040 – 45° Street Bend P5040 015000000 – 15mm P5040 022000000 – 22mm P5040 028000000 – 28mm P5040 035000000 – 35mm P5040 042000000 – 42mm P5040 054000000 – 54mm P5041 – 45° Obtuse Bend P5041 015000000 – 15mm P5041 022000000 – 22mm P5041 028000000 – 28mm P5041 035000000 – 35mm P5041 042000000 – 42mm P5041 054000000 – 54mm P5060 – Return Bend P5060 022000000 – 22mm P5085 – Crossover Coupler P5085 015000000 – 15mm P5085 022000000 – 22mm P5130 – Equal Tee P5130 01515015 – 15mm P5130 02222022 – 22mm P5130 02828028 – 28mm P5130 03535035 – 35mm P5130 04242042 – 42mm P5130 05454054 – 54mm P5130RB – Reduced Branch Tee P5130 02215022 – 22mm x 15mm x 22mm P5130 02815028 – 28mm x 15mm x 28mm P5130 02822028 – 28mm x 22mm x 28mm P5130 03515035 – 35mm x 15mm x 35mm P5130 03522035 – 35mm x 22mm x 35mm P5130 03528035 – 35mm x 28mm x 35mm P5130 04222042 – 42mm x 22mm x 42mm P5130 04228042 – 42mm x 28mm x 42mm P5130 04235042 – 42mm x 35mm x 42mm P5130 05422054 – 54mm x 22mm x 54mm P5130 05428054 – 54mm x 28mm x 54mm P5130 05435054 – 54mm x 35mm x 54mm P5130 05442054 – 54mm X 42mm X 54mm P5130RBE – Reduced Both End Tee P5130 01522015 – 15mm X 22mm X 15mm P5130 02228022 – 22mm X 28mm X 22mm P5130RE – Reduced End Tee P5130 02222015 – 22mm X 22mm X 15mm P5130 02828015 – 28mm X 28mm X 15mm P5130 02822022 – 28mm X 22mm X 22mm P5130REB – Reduced End & Branch Tee P5130 02215022 – 22mm X 1mm5 X 22mm P5130 02815028 – 28mm X 15mm X 28mm P5130 02822022 – 28mm X 22mm X 22mm P5130 03522028 – 35mm X 22mm X 28mm P5130 03528028 – 35mm X 28mm X 28mm P5130 04235035 – 42mm X 35mm X 35mm P5130 05442042 – 54mm X 42mm X 42mm P5240 – Reduced Straight Coupler P5240 02215000 – 22mm X 15mm P5240 02822000 – 28mm X 22mm P5240 03528000 – 35mm X 28mm P5240 04235000 – 42mm X 35mm P5240 05442000 – 54mm X 42mm P5270 – Straight Coupler P5270 01500000 – 15mm P5270 02200000 – 22mm P5270 02800000 – 28mm P5270 03500000 – 35mm P5270 04200000 – 42mm P5270 05400000 – 54mm P5270S – Slip Coupler P5270S01500000 – 15mm P5270S02200000 – 22mm P5270S02800000 – 28mm P5270S03500000 – 35mm P5270S04200000 – 42mm P5270S05400000 – 54mm P5301 – End Cap P5301 01500000 – 15mm P5301 02200000 – 22mm P5301 02800000 – 28mm P5301 03500000 – 35mm P5301 04200000 – 42mm P5301 05400000 – 54mm P5243 – Fitting Reducer P5243 02215000 – 22mm X 15mm P5243 02815000 – 28mm X 15mm P5243 02822000 – 28mm X 22mm P5243 03522000 – 35mm X 22mm P5243 03528000 – 35mm X 28mm P5243 04222000 – 42mm X 22mm P5243 04228000 – 42mm X 28mm P5243 04235000 – 42mm X 35mm P5243 05435000 – 54mm X 35mm P5243 05442000 – 54mm X 42mm P4093 – Wallplate Elbow Tank Connector P4093 01504025 – 15mm X ½” BSP (M) P4093 01504035 – 15mm X ½” BSP (M) P4096G – Female Bent Union P4096G01504000 – 15mm X ½” BSP (F) P4096G02206000 – 22mm X ¾” BSP (F) P4096G02808000 – 28mm X 1” BSP (F) P4096G03510000 – 35mm X 1.1/4” BSP (F) P4096G04212000 – 42mm X 1.1/2” BSP (F) P4096G05416000 – 54mm X 2” BSP (F) P4244 – Straight Wallplate Elbow Tank Connector P2422G01504025- 15mm X ½” BSP (M) P4330 – Union P4330 01500000 – 15mm P4330 02200000 – 22mm P4330 02800000 – 28mm P4330 03500000 – 35mm P4330 04200000 – 42mm P4330 05400000 – 54mm P4330G – Female Straight Union Connector (BSP) P4330G01504000 – 15mm X ½” BSP (F) P4330G01506000 – 15mm X ¾” BSP (F) P4330G02206000 – 22mm X ¾” BSP (F) P4330G02208000 – 22mm X 1” BSP (F) P4330G02808000 – 28mm X 1” BSP (F) P4330G03510000 – 35mm X 1.1/4” BSP (F) P4330G04212000 – 42mm X 1.1/2” BSP (F) P4330G05416000 – 54mm X 2” BSP (F) P4331G – Male Straight Union Connector (BSP) P4331G01504000 – 15mm X ½” BSP (M) P4331G01506000 – 15mm X ¾” BSP (M) P4331G02204000 – 22mm X ½” BSP (M) P4331G02206000 – 22mm X ¾” BSP (M) P4331G02208000 – 22mm X 1” BSP (M) P4331G02808000 – 28mm X 1” BSP (M) P4331G03510000 – 35mm X 1.1/4” BSP (M) P4331G04212000 – 42mm X 1.1/2” BSP (M) P4331G05416000 – 54mm X 2” BSP (M)

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Manufacturer:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Range of end feed copper solder fittings for use with copper tube. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2112370

Size:

see models

Marking:

Valtech on body.

Installation Requirements:

R001

Expiry date:

31/12/2026

Model:

CSF28 90°Elbow Close Ruff C×C (8,10,12,15,22,28,35,42,54mm) CSF29 90°Street Elbow Close Ruff Ftg×C (8,10,12,15,22,28,35,42,54mm) CSF38 Reducing 90° Elbow C×C ( 22×15, 28×22, 28×15) CSF30 45°Elbow C×C(8,10,12,15,22,28,35,42,54mm) CSF39 45°Elbow FTG×C(8,10,12,15,22,28,35,42,54mm) CSF31 Equal Tee C×C×C(8,10,12,15,22,28,35,42,54mm) CSF32 Reducing TEE C×C×C (15×15×10, 15×15×12, 15×15×22, 22×22×28, 22×22×15, 22×22×12, 22×15×22, 22×15×15, 28×28×22, 28×28×15, 28×22×28, 28×22×22, 28×22×15, 28×15×28, 28×15×22,28×15×15, 35×35×28, 35×35×22, 35×35×15, 42×42×35, 42×42×28, 42×42×22, 42×42×15, 54×54×42,54×54×35, 54×54×28, 54×54×22, 54×54×15) CSF23 Equal Coupling C×C (8,10,12,15,22,28,35,42,54mm) CSF25 Reducing Coupling C×C (10×8, 12×10, 12×8, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15, 28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15) CSF26 Fitting Reducer Ftg×C (10×8, 12×10, 12×8, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15, 28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15) CSF27 Tube Cap (8,10,12,15,22,28,35,42,54mm) CSF33 Cross Over Coupling C×C(15,22mm) CSF40 Partial Cross Over Ftg×C (15,22mm) CSF34 Straight Tap Connector C×FI(15×1/2”, 15×3/4”, 22×3/4”) CSF35 Bent Tap Connector C×FI(15×1/2”, 15×3/4”, 22×3/4”) CSF07 90°Elbow Close Ruff C×C (6,8,10,12,15,22,28,35,42,54mm) CSF08 90°Street Elbow Close Ruff Ftg×C (6,8,10,12,15,22,28,35,42,54mm) CSF41 Reducing 90° Elbow C×C (12×10, 12×8, 15×12, 22×15, 28×22, 28×15, 35×28, 35×22, 42×35, 42×28,42x22,54×42, 54×35, 54×28) CSF10 45°Elbow C×C(6,8,10,12,15,22,28,35,42,54mm) CSF11 45°Elbow FTG×C(6,8,10,12,15,22,28,35,42,54mm) CSF42 90°Elbow Long Turn C×C 6,8,10,12,15,22,28,35,42,54mm) CSF43 90°Street Elbow Long Turn Ftg×C (6,8,10,12,15,22,28,35,42,54mm) CSF13 Equal Tee C×C×C(6,8,10,12,15,22,28,35,42,54mm) CSF45 Reducing TEE C×C×C (6x6x8, 8×8×6, 10×10×15, 12×12×10, 12×12×8, 12×10×10, 12×8×8, 15×15×22, 15×15×12,15×15×10, 15x15x8, 15×12×15, 15×12×12, 15×12×10, 15×12×8, 15x10x15, 15x10x10, 22×22×28, 22×22×15, 22×22×12, 22×15×22,22×15×15, 22×15×12,28×28×22, 28×28×15, 28×22×28, 28×22×22, 28×22×15, 28x15x28, 28x15x22, 28×15×15,35×35×28, 35×35×22, 35×35×15,35×28×35, 35×28×28, 35×28×22, 35×22×35, 35×22×28, 35×22×22, 35×15×35, 42×42×35,42×42×28, 42×42×22, 2x42x15, 42×35×42, 42×28×42, 42×22×42, 54×54×42, 54×54×35, 54×54×28, 54×54×22,54×54×15,54×42×54, 54×35×54) CSF01 Equal Coupling C×C (6,8,10,12,15,22,28,35,42,54mm) CSF04 Reducing Coupling C×C (8×6, 10×8, 10×6, 12×10, 12×8, 12×6, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15, 28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15) CSF05 Fitting Reducer Ftg×C (8×6, 10×8, 10×6, 12×10, 12×8, 12×6, 15×12, 15×10, 15×8, 22×15, 22×12, 22×10, 28×22, 28×15,28×12, 35×28, 35×22, 35×15, 42×35, 42×28, 42×22, 42×15, 54×42, 54×35, 54×28, 54×22, 54×15) CSF16 Tube Cap (6,8,10,12,15,22,28,35,42,54mm) CSF46 Return Bend C×C(6,8,10,12,15,22,28,35,42,54mm) CSF14 Cross Over Coupling C×C(15,22mm) CSF15 Partial Cross Over Ftg×C (15,22mm) CSF21 Straight Tap Connector C×FI(15×1/2”, 15×3/4”, 22×3/4”) CSF19 Bent Tap Connector C×FI(15×1/2”, 15×3/4”, 22×3/4”)

Approval Holder:

Ningbo Valtech Flow Control Co. Ltd.

Company Name

Ningbo Valtech Flow Control Co. Ltd.

Address

Room 610 New Oriental Times Building No.1130

Country

Baizhang East Road

Phone

0574-88001556

View All Listings by this Company

Range of copper end feed solder fittings for use with copper tube (EN1057). For above and below ground use. Maximum working pressure for sizes 8mm to 54mm is 25.0 bar. Maximum working pressure for sizes above 54mm is 16.0 bar. Maximum operating temperature 99°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2309041

Size:

See models

Marking:

Size and Howhi’s logo on fitting body

Installation Requirements:

R001

Expiry date:

30/09/2028

Model:

Coupling (rolled stop): 100EN08AB - 8mm, 100EN10AB - 10mm, 100EN12AB - 12mm, 100EN15AB - 15mm, 100EN22AB - 22mm, 100EN28AB - 28mm, 100EN35AB - 35mm, 100EN42AB - 42mm, 100EN54AB - 54mm, 100EN67AB - 67mm, 100EN76AB - 76mm 100EN108AB - 108mm. Reducing Coupling: 101EN1008AB - 10 x 8mm, 101EN1210AB - 12 x 10mm, 101EN1508AB - 15 x 8mm, 101EN1510AB - 15 x 10mm, 101EN1512AB - 15 x 12mm, 101EN2215AB - 22 x 15mm, 101EN2815AB - 28 x 15mm, 101EN2822AB - 28 x 22mm, 101EN3522AB - 35 x 22mm, 101EN3528AB - 35 x 28mm, 101EN4222AB - 42 x 22mm, 101EN4235AB - 42 x 35mm, 101EN4228AB - 42 x 28mm, 101EN5428AB - 54 x 28mm, 101EN5435AB - 54 x 35mm, 101EN5442AB - 54 x 42mm, 101WE1512AB - 15mm x ½”, 101WE2221AB - 22mm x ¾” 101WE2825AB - 28mm x 1”. Fitting Reducer (M/F): 102EN1008AB - 10 x 8mm, 102EN1208AB - 12 x 8mm, 102EN1210AB - 12 x 10mm, 102EN1508AB - 15 x 8mm, 102EN1510AB - 15 x 10mm, 102EN1512AB - 15 x 12mm, 102EN2210AB - 22 x 10mm, 102EN2212AB - 22 x 12mm, 102EN2215AB - 22 x 15mm, 102EN2812AB - 28 x 12mm, 102EN2815AB - 28 x 15mm, 102EN2822AB - 28 x 22mm, 102EN3515AB - 35 x 15mm, 102EN3522AB - 35 x 22mm, 102EN3528AB - 35 x 28mm, 102EN4215AB - 42 x 15mm, 102EN4222AB - 42 x 22mm, 102EN4228AB - 42 x 28mm, 102EN4235AB - 42 x 35mm, 102EN5415AB - 54 x 15mm, 102EN5422AB - 54 x 22mm, 102EN5428AB - 54 x 28mm, 102EN5435AB - 54 x 35mm, 102EN5442AB - 54 x 42mm, 102EN6728AB - 67 x 28mm, 102EN6735AB - 67 x 35mm, 102EN6742AB - 67 x 42mm, 102EN6754AB - 67 x 54mm, 102EN7628AB - 76 x 28mm, 102EN7635AB - 76 x 35mm, 102EN7642AB - 76 x 42mm, 102EN7654AB - 76 x 54mm, 102EN7667AB - 76 x 67mm 102EN10854AB - 108 x 54mm. 90° ELBOW: 103EN08AB - 8mm, 103EN10AB - 10mm, 103EN12AB - 12mm, 103EN15AB - 15mm, 103EN22AB - 22mm, 103EN28AB - 28mm, 103EN35AB - 35mm, 103EN42AB - 42mm, 103EN54AB - 54mm, 103EN67AB - 67mm, 103EN76AB - 76mm & 103EN108AB - 108mm. 90° Street Elbow (M/F) 104EN08AB - 8mm, 104EN10AB - 10mm, 104EN12AB - 12mm, 104EN15AB - 15mm, 104EN22AB - 22mm, 104EN28AB - 28mm, 104EN35AB - 35mm, 104EN42AB - 42mm, 104EN54AB - 54mm, 104EN67AB - 67mm, 104EN76AB - 76mm 104EN108AB - 108mm. 90° Elbow (Long Radius): 105EN10AB - 10mm, 105EN12AB - 12mm, 105EN15AB - 15mm, 105EN18AB - 18mm, 105EN22AB - 22mm, 105EN28AB - 28mm, 105EN35AB - 35mm, 105EN42AB - 42mm, 105EN54AB - 54mm. 90° Street Elbow Long Turn (M/F): 106EN06AB - 6mm, 106EN08AB - 8mm, 106EN10AB - 10mm, 106EN12AB - 12mm, 106EN28AB - 28mm, 106EN35AB - 35mm, 106EN42AB - 42mm 106EN54AB - 54mm 45° Elbow: 107EN08AB - 8mm, 107EN10AB - 10mm, 107EN15AB - 15mm, 107EN22AB - 22mm, 107EN28AB - 28mm, 107EN35AB - 35mm, 107EN42AB - 42mm, 107EN54AB - 54mm, 107EN67AB - 67mm, 107EN76AB - 76mm 107EN108AB - 108mm. 45° Elbow (M/F): 108EN08AB - 8mm, 108EN10AB - 10mm, 108EN15AB - 15mm, 108EN22AB - 22mm, 108EN28AB - 28mm, 108EN35AB - 35mm, 108EN42AB - 42mm 108EN54AB - 54mm. Slip Coupling: 111EN15AB - 15mm, 111EN22AB - 22mm, 111EN28AB - 28mm, 111EN35AB - 35mm, 111EN42AB - 42mm 111EN54AB - 54mm. Equal Tee: 112EN08AB - 8mm, 112EN10AB - 10mm, 112EN12AB - 12mm, 112EN15AB - 15mm, 112EN22AB - 22mm, 112EN28AB - 28mm, 112EN35AB - 35mm, 112EN42AB - 42mm, 112EN54AB - 54mm, 112EN67AB - 67mm, 112EN76AB - 76mm & 112EN108AB - 108mm. Reducing Tee: 113EN080806AB - 8 x 8 x 6mm, 113EN101008AB - 10 x 10 x 8mm, 113EN121208AB - 12 x 12 x 8mm, 113EN121210AB - 12 x 12 x 10mm, 113EN151508AB - 15 x 15 x 8mm, 113EN151510AB - 15 x 15 x 10mm, 113EN151512AB - 15 x 15 x 12mm, 113EN222210AB - 22 x 22 x 10mm, 113EN222215AB - 22 x 22 x 15mm, 113EN282815AB - 28 x 28 x 15mm, 113EN282822AB - 28 x 28 x 22mm, 113EN353515AB - 35 x 35 x 15mm, 113EN353522AB - 35 x 35 x 22mm, 113EN353528AB - 35 x 35 x 28mm & 113EN424215AB - 42 x 42 x 15mm. Reducing Tee: 113EN424222AB - 42 x 42 x 22mm, 113EN424228AB - 42 x 42 x 28mm, 113EN424235AB - 42 x 42 x 35mm, 113EN545415AB - 54 x 54 x 15mm, 113EN545422AB - 54 x 54 x 22mm, 113EN545428AB - 54 x 54 x 28mm, 113EN545435AB - 54 x 54 x 35mm, 113EN545442AB - 54 x 54 x 42mm, 113EN676728AB - 67 x 67 x 28mm, 113EN676735AB - 67 x 67 x 35mm, 113EN676742AB - 67 x 67 x 42mm, 113EN676754AB - 67 x 67 x 54mm, 113EN767628AB - 76 x 76 x 28mm, 113EN767635AB - 76 x 76 x 35mm, 113EN767642AB - 76 x 76 x 42mm, 113EN767654AB - 76 x 76 x 54mm, 113EN767667AB - 76 x 76 x 67mm, 113EN10810854AB - 108 x 108 x 54mm, 113EN10810867AB - 108 x 108 x 67mm, 113EN10810876AB - 108 x 108 x 76mm, 114EN151010AB - 15 x 10 x 10mm, 114EN151015AB - 15 x 10 x 15mm, 114EN221515AB - 22 x 15 x 15mm, 114EN221522AB - 22 x 15 x 22mm, 114EN281515AB - 28 x 15 x 15mm, 114EN281522AB - 28 x 15 x 22mm, 114EN281528AB - 28 x 15 x 28mm, 114EN282215AB - 28 x 22 x 15mm, 114EN282222AB - 28 x 22 x 22mm, 114EN282228AB - 28 x 22 x 28mm, 114EN352222AB - 35 x 22 x 22mm, 114EN352235AB - 35 x 22 x 35mm, 114EN352815AB - 35 x 28 x 15mm, 114EN352822AB - 35 x 28 x 22mm, 114EN352828AB - 35 x 28 x 28mm, 114EN352835AB - 35 x 28 x 35mm, 114EN422828AB - 42 x 28 x 28mm, 114EN544242AB - 54 x 42 x 42mm, 114EN675467AB - 67 x 54 x 67mm, 115EN121215AB - 12 x 12 x 15mm, 115EN151522AB - 15 x 15 x 22mm, 115EN222228AB - 22 x 22 x 28mm 115EN282835AB - 28 x 28 x 35mm. Reducing 90° Elbow (short): 121EN2215AB - 22 x 15mm. Stop End: 137EN08AB - 8mm, 137EN10AB - 10mm, 137EN15AB - 15mm, 137EN22AB - 22mm, 137EN28AB - 28mm, 137EN35AB - 35mm, 137EN42AB - 42mm, 137EN54AB - 54mm, 137EN67AB - 67mm, 137EN76AB - 76mm 137EN108AB - 108mm. Full Crossover: 138EN15AB - 15mm 138EN22AB - 22mm. Partial Crossover (M/F): 148EN15AB - 15mm 148EN22AB - 22mm.

Approval Holder:

Zhuji City Howhi Air Conditioners Made Co Ltd

Company Name

Zhuji City Howhi Air Conditioners Made Co Ltd

Address

Donggong Village, Yangmeiqiao Community, Diankou Diankou Town, Zhuji City, Shaoxing City, Zhejiang Province, China

View All Listings by this Company

Manufacturer:

Zhuji City Howhi Air Conditioners Made Co Ltd

Company Name

Zhuji City Howhi Air Conditioners Made Co Ltd

Address

Donggong Village, Yangmeiqiao Community, Diankou Diankou Town, Zhuji City, Shaoxing City, Zhejiang Province, China

View All Listings by this Company

Range of stainless-steel plate heat exchanger assemblies incorporating single or twin pumps on the primary circuit. Maximum working pressure 10 Bar (UKE-8 models) or 6 bar (UKE-14 models).

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1350 Heat Exchangers

Size:

UKE-8 range: Secondary circuit: 1¼” BSP (M) inlet/outlet, Primary circuit: 1¼” BSP (F) inlet/outlet. UKE-14 range: Secondary circuit: 2” BSP (M) inlet/outlet, Primary circuit: DN40 or DN50 flange inlet/outlet.

Marking:

UK Exchangers, Model no, Serial number, pressure, max temperature, manufacture date (YYYY) on data plate on body.

Installation Requirements:

R001

Expiry date:

31/05/2028

Model:

UKE-8-YY-XX (8 – 75 plates), UKE-14-YY-XX (8-70 plates). YY denotes number of ports, XX denotes number of plates.

Approval Holder:

UK Exchangers Ltd

Company Name

UK Exchangers Ltd

Address

Unit 55 Stilebrook Road Olney

Postcode

MK46 5EA

Country

United Kingdom

General Email

alex@ukeltd.com

View All Listings by this Company

Range of stainless-steel plate heat exchangers. Maximum working pressure 10 bar. Maximum operating temperature 90°C.

Section:

1350 Heat Exchangers

Size:

17.05mm hole primary & 10.55mm hole secondary.

Marking:

'Original Quality' symbol (registered trade-mark of Bosch) and technical information on body.

Installation Requirements:

R001

Expiry date:

31/05/2028

Model:

C-PHE 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30 & 32.

Product Images

Approval Holder:

Bosch Termoteknik Isitma ve Klima Sanayi ve Ticaret A.S.

Company Name

Bosch Termoteknik Isitma ve Klima Sanayi ve Ticaret A.S.

Address

Organize Sanayi Bolgesi

Postcode

45030 Manisa,

Country

Turkey

Phone

0090 236 226 1366

General Email

gulsah.colak@tr.bosch.com

View All Listings by this Company

Manufacturer:

Bosch Termoteknik Isitma ve Klima Sanayi ve Ticaret A.S.

Company Name

Bosch Termoteknik Isitma ve Klima Sanayi ve Ticaret A.S.

Address

Organize Sanayi Bolgesi

Postcode

45030 Manisa,

Country

Turkey

Phone

0090 236 226 1366

General Email

gulsah.colak@tr.bosch.com

View All Listings by this Company

Range of wall mounted combination boilers providing domestic hot water via a heat exchanger and pressurised central heating system. The products can be supplied with a rigid or flexible filling loop or keyless filling link. The flexible and rigid filling loops incorporate a flexible hose or copper pipe, isolation valve, double check valve assembly (suitable for back flow protection against fluid category 3). The keyless filling link incorporates a CAB backflow prevention device (suitable for back flow protection against fluid category 3). The products also incorporate an expansion vessel and pressure relief valve set at 3.0 bar. Maximum working pressure of primary circuit 2.5 bar. Maximum operating temperature of primary circuit 85°C Maximum working pressure of secondary circuit 8.0 bar Maximum operating temperature of secondary circuit 60°C

Section:

1465 Heaters

Section Subtitle:

Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

2309044

Size:

¾” BSP (M) (primary circuit). ½” BSP (M) (secondary circuit).

Marking:

Baxi on front cover.

Installation Requirements:

R001 R140 R360

Expiry date:

30/09/2028

Model:

7796586 BAXI 624 COMBI 2 7796587 BAXI 630 COMBI 2 7796588 BAXI 636 COMBI 2 7813609 BAXI 624 COMBI LPG 2 7814304 BAXI 824 COMBI 2 7814305 BAXI 830 COMBI 2 7814306 BAXI 836 COMBI 2 7814307 BAXI 830 COMBI LPG 2 7814308 BAXI 836 COMBI LPG 2 7814309 BAXI ASSURE 524 COMBI 2 7814310 BAXI ASSURE 530 COMBI 2 7814311 BAXI ASSURE 536 COMBI 2 7814312 BAXI ASSURE 530 COMBI LPG 2

Approval Holder:

Baxi Heating UK Limited

Company Name

Baxi Heating UK Limited

Address

Brooks House, Coventry Road, Warwick

Postcode

CV34 3LL

View All Listings by this Company

Range of shower outlets (brass or stainless-steel bodies – various finishes) incorporating EPDM O-rings. Maximum operating temperature 60.0°C

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2305034

Size:

¾” BSP (M)

Marking:

VOLA logo on body

Installation Requirements:

R001 R040

Expiry date:

31/05/2028

Model:

080W-XX Brass 080W-XX Stainless-steel ‘xx’ denotes the surface finish and is replaced by: 02=grey; 04=blue; 05=orange; 06=green; 08=yellow; 09=dark grey; 12=mocha; 14=orange-red; 15=dark blue; 16=chrome; 17=black; 18=white; 19=brass(raw); 20=brushed chrome; 21=red; 25=pink; 27=dull black; 40=Stainless Steel; 60=black chrome; 61=brushed black chrome; 62=piano black; 63=copper; 64=brushed copper; 65=bright gold; 66=dark gold; 67=brushed dark gold; 68=nickel; 69=brushed nickel; 70=brushed bright gold.

Approval Holder:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company

Manufacturer:

Vola A/S

Company Name

Vola A/S

Address

Lunavej 2 Horsens

Postcode

8700

Country

Denmark

Phone

+4576284846

General Email

mk@vola.dk

View All Listings by this Company