Directory Search Results

Print List

#241102004

Range of shower hoses, multi-layered hose (silver external appearance) with PVC inner liner, brass end connections. Open outlet use only. Maximum operating temperature 60°C.

Section:
1860 Tubes
Section Subtitle:
Plastic hoses.
WRAS Approval Number:
241102004
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F) captive nut.
Marking:
Solex, WRAS and date of manufacture (MM/YY) on sleeve or nut
Installation Requirements:
R001
Expiry date:
30/11/2029
Model:
H21X0008S-01 H21X0008S-02 H21X0008S-04 H21X0008S-05 X: denote the length of hose from 500mm to 2200mm.

Manufacturer:
Xiamen Solex High-Tech Industries Co., Ltd.
Company Name
Xiamen Solex High-Tech Industries Co., Ltd.
Address
No. 298 Yangguang Road West, Haicang District, Xiamen, Fujian Province, 361022
Country
China

View All Listings by this Company

Print This Approval


#240902006

Stainless steel interlocked (chrome plated) silicone lined kitchen tap pull-out hose. Open outlet use only. Maximum operating temperature 85°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
240902006
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
M12 x M12.
Marking:
Dornbracht on ferule.
Installation Requirements:
R001
Expiry date:
30/09/2029
Model:
04300212000

Approval Holder:
Dornbracht GmbH & Co. KG.
Company Name
Dornbracht GmbH & Co. KG.
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval


#240988004

Range of stainless steel inter-locked shower hoses incorporating PVC linings in various finishes. Maximum operating temperature 65°C.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
240988004
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Open outlet use only
Size:
See model
Marking:
PPI, WRAS & year of manufacture (yyyy) on ferrule
Installation Requirements:
R001 R040
Expiry date:
30/09/2029
Model:
SHS(D)(C)-A-B-L-F (SHS(08/10)(P/B/S)–Connection A - Connection B– Length - different finish) SHS – The name of our Stainless Steel Shower Tube D(08/10) – 08=DN8 or 10=DN10 C(P/B/S) – P=Plastics Core Only DN8, B=Brass Core or S=Stainless Steel Core A-B – Connection A and Connection B (from 01 to 10) 01 = F1/2 knurled nut, 02 = F1/2 hex nut , 03 = F1/2 Conical Connection Shell knurled nut, 04 = F1/2 Conical Connection Housing with O-ring nut, 05 = F1/2 Conical Connection Shell without O-ring nut, 06 = F1/2 Conical Connection, 07 = T connection, 08 = M15×1 connection, 09 = M22×1connection(L=20-30)and 10=F1/2 cone-shaped connection anti winding (Connections 01, 02, 04, 05, 06, 07, 08, 09 & 10 applicable for DN8 hoses and Connection 01, 02, 03 & 06 applicable for DN10 hoses) L (XXX) Length (15cm to 200cm): 015=15cm 200=200cm F (XXX) different finish (Chrome Finish No suffix), Chrome = No suffix, Brushed brass = BGP, PVD Gold = PVD, Brushed Nickel = BN1, Gun Metal = GMG and Electrolytic Polished = EP1 For example: "SHS08B-01-04-150 would be DN8, Brass Core,F1/2 x F1/2 Conical Connection Housing with O-ring nut , 150cm long, Chrome Finish" and "SHS10S-01-05-150-PVD would be DN10,Stainless Steel Core,F1/2 xF1/2 Conical Connection Shell without O-ring nut, 150cm long, PVD Gold Finish."

Approval Holder:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company
Manufacturer:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company

Print This Approval


#241004018

Range of stainless steel interlocked shower hoses with EPDM O-rings. Maximum operating temperature 65°C. Open outlet use only.

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
241004018
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
see model
Marking:
NB-OGH, WRAS etched on ferrule
Installation Requirements:
R001
Expiry date:
31/10/2029
Model:
SS-A-A-**-** Shower hose (interlocked) ½” BSP(F) captive nut A - Type of Nut/Connection Fitting 1 Conic nut smooth 2 Conic nut with o-ring 3 Conic nut knurl 4 Ball nut 5 Zig nut 6 Knurl nut Note 1: ** - Length 30cm-300cm Note 2: ** Denotes different finishes CP Chrome plated BN Brushed Nickel MB Matte Black ORB Oil Rubber Bronze EP Polish KH2002-A-**-** Shower hose (interlocked) M15*1 A - Type of Nut/Connection Fitting 1 Conic nut smooth 2 Conic nut with o-ring 3 Conic nut knurl Note 1: ** - Length 30cm-300cm Note 2: ** Denotes different finishes CP Chrome plated BN Brushed Nickel MB Matte Black ORB Oil Rubber Bronze EP Polish

Manufacturer:
Yuyao Ou Gao Hose Co.,Ltd.
Company Name
Yuyao Ou Gao Hose Co.,Ltd.
Address
No.1, Second Road, Industrial West Zone, Nanlei Village, Lubu Town, Yuyao City, Ningbo City, Zhejiang Province
Country
China

View All Listings by this Company

Print This Approval


#2201107

Range of Ultraflow Air bubble top indirect and direct single coil unvented storage cylinders. The secondary circuit is factory fitted with a temperature and pressure relief valve set at 10.0 bar@90˚C. A safety kit (manifold) consisting of a single check valve assembly, verified by test (suitable for backflow prevention against fluid category 2), strainer, an expansion relief valve set at 8.0 bar and a pressure reducing valve set at 3.0 bar and a tundish is also provided. Alternative inlet control group and temperature and pressure relief valve added January 2023. Maximum working pressure: Secondary circuit: 7.5 bar. Primary circuit: 6.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
1890 Unvented Heating Apparatus
Size:
Secondary circuit: 22mm compression. Primary circuit: 22mm compression. Return circuit: 22mm compression.
Marking:
Ultraflow Air on label on front of body.
Installation Requirements:
R001 R140 R360
Expiry date:
31/01/2027
Model:
UOD120 – ULTRAFLOW AIR 120 DIRECT UNVENTED HOT WATER STORAGE CYLINDER. UOD150 – ULTRAFLOW AIR 150 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UOD170 – ULTRAFLOW AIR 170 DIRECT UNVENTED HOT WATER STORAGE CYLINDER. UOD200 – ULTRAFLOW AIR 200 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UOD250 – ULTRAFLOWAIR 250 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UOD300 – ULTRAFLOW AIR 300 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UOI120 – ULTRAFLOW AIR 120 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UOI150 – ULTRAFLOW AIR 150 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UOI170 – ULTRAFLOW AIR 170 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UOI200 – ULTRAFLOW AIR 200 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UOI250 – ULTRAFLOW AIR 250 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UOI300 - ULTRAFLOW AIR 300 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UODS120-ULTRAFLOW AIR SLIM 120 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UODS150-ULTRAFLOW AIR SLIM 150 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UODS170-ULTRAFLOW AIR SLIM 170 DIRECT UNVENTED HOT WATER STORAGE CYLINDER UODS200-ULTRAFLOW AIR SLIM 200 DIRECT UNVENTED HOT WATER STORAGE CYLINDER. UOIS120-ULTRAFLOW AIR SLIM 120 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UOIS150-ULTRAFLOW AIR SLIM 150 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UOIS170-ULTRAFLOW AIR SLIM 170 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER UOIS200-ULTRAFLOW AIR SLIM 200 INDIRECT UNVENTED HOT WATER STORAGE CYLINDER

Approval Holder:
L & M (HEATING) SUPPLIES LTD.
Company Name
L & M (HEATING) SUPPLIES LTD.
Address
103 LOCKFIELD AVENUE ENFIELD, ENFIELD, MIDDLESEX
Postcode
EN3 7PY

View All Listings by this Company

Print This Approval


#240902706

Range of unvented storage cylinders. The secondary circuit is factory fitted with a temperature and pressure relief valve set at 6.0 bar at 95˚C and an expansion relief valve set at 4.5 bar. The product is supplied with a safety group consisting of a pressure reducing valve set at 3.0 bar, and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Supplied with an expansion vessel and tundish. Maximum working pressures: Secondary circuit: 4.0 Bar Primary Circuit: 3.0 Bar Solar circuit: 6.0 Bar Maximum operating temperature 99.0°C

Section:
1890 Unvented Heating Apparatus
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Secondary circuit: 22mm compression. Primary circuit: 22/28mm compression. Solar coil: 22/28mm compression
Marking:
Gledhill, model name, date of manufacture (DD/MM/YYYY), Capacity, max pressure, max temp and other technical information on label on body of cylinder.
Installation Requirements:
R001 R140 R360
Expiry date:
30/09/2029
Model:
PLUHP180 PLUHP210 PLUHP250 PLUHP300 PLUHP400 PLUHP180S PLUHP210S PLUHP250S PLUHP300S PLUHP400S PLUHP180SL PLUHP210SL PLUHP200DUO PLUHP300DUO PLUHP200DUOPP PLUHP300DUOPP Note: PLU - Plus – Gledhill plus Build Spec PRO - Pro - Gledhill professional build spec DR- Dir – Direct IN - Ind – Indirect HP – Heat pump S - Sol – Solar H - Horiz – Horizontal SH – Solar Horizontal DUO – CYL/BUF – Cylinder and buffer combination PP – Pre Plumb – Pre-plumbed SP- System plus SR -System ready EE – external expansion UV – unvented SL - Slim – Slimline

Approval Holder:
Gledhill Building Products Ltd
Company Name
Gledhill Building Products Ltd
Address
Sycamore Estate Blackpool
Postcode
FY4 3RL
Phone
(01253) 474439

View All Listings by this Company
Manufacturer:
Gledhill Building Products Ltd
Company Name
Gledhill Building Products Ltd
Address
Sycamore Estate Blackpool
Postcode
FY4 3RL
Phone
(01253) 474439

View All Listings by this Company

Print This Approval


#241102717

Range of 2, 3, 4 and 5 port manifold assemblies with brass bodies (various finishes) for use with copper pipe (BS EN 1057) and “EA” range of PEX/AL/PEX multilayer pipe. Some models have non rising spindle headworks control valve in the ports. Maximum working pressure: 10.0 Bar. Maximum operating temperature: 95.0°C.

Section:
1950 Manifolds
Section Subtitle:
Metal.
WRAS Approval Number:
241102717
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models:
Marking:
EFIELD and size on body
Installation Requirements:
R001
Expiry date:
30/11/2029
Model:
Adaptor: EHA0005 – ¾”X20mm adaptor, EHA0006 – 14.7/15X16mm Adaptor. Brass Manifold to Copper pipe: EHM0004 - 1" X 1/2" X 5 Outlets, EHM0001 - 1" X 1/2" X 4 Outlets, EHM0002 - 1" X 1/2" X 3 Outlets, EHM0003 - 1" X 1/2" X 2 Outlets, EHM1004 - 3/4" X 1/2" X 5 Outlets, EHM1001 - 3/4" X 1/2" X 4 Outlets, EHM1002 - 3/4" X 1/2" X 3 Outlets, EHM1003 – 3/4" X 1/2" X 2 Outlets. Brass Manifold to MCL: EHM2001 - 1" X 16 X 5 Outlets, EHM2002 - 1" X 16 X 4 Outlets, EHM2003 - 1" X 16 X 3 Outlets, EHM2004 - 1" X 16 X 2 Outlets, EHM3001 - 3/4" X 16 X 5 Outlets, EHM3002 - 3/4" X 16 X 4 Outlets, EHM3003 - 3/4" X 16 X 3 Outlets, EHM3004 - 3/4" X 16 X 2 Outlets. Manifold with Stop valve: EHM4004 - EHM 1" X 20 X 5 Outlets, EHM4001 - EHM 1" X 20 X 4 Outlets, EHM4002 - EHM 1" X 20 X 3 Outlets, EHM4003 - EHM 1" X 20 X 2 Outlets, EHM5004 - EHM3/4" X 16 X 5 Outlets, EHM5001 - EHM3/4" X 16 X 4 Outlets, EHM5002 - EHM3/4" X 16 X 3 Outlets, EHM5003 - EHM3/4" X 16 X 2 Outlets. Surface colour: finished Chrome, Brass colour and Half Chromed.

Approval Holder:
Shandong EFIELD Piping System Co., Ltd.
Company Name
Shandong EFIELD Piping System Co., Ltd.
Address
No.2369 Yikang Road South Section, Economic Development Zone, Tengzhou City, Zaozhuang City, Shandong
Country
China
Phone
+86-632-5990659
General Email
William.wang@efieldgroup.com

View All Listings by this Company

Print This Approval


#241004009

Range of wall mounted, manually blended, shower valves, (brass bodies – various finishes). Incorporating a ceramic cartridge controlling both the flow and temperature. The outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
241004009
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾””BSP(M) x ½” BSP(M) offset union
Marking:
Villeroy & Boch on operating member
Installation Requirements:
R001 R010 R040
Expiry date:
31/10/2029
Model:
TVS107003000XX Liberty TVS122003000XX Empora XX= Finishing 61= Chrome 64=Brushed Nickel 76=Brushed gold K5= Matt black

Approval Holder:
Villeroy & Boch AG
Company Name
Villeroy & Boch AG
Address
Saaruferstraße 1-3 Mettlach
Postcode
66693
Country
Germany
Phone
+49 151 16775778
General Email
Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Print This Approval


#241004033

Range of concealed manually operated blending valves with (brass bodies - various finishes), incorporating a ceramic cartridge headwork controlling the flow and temperature, a manually operated diverter to shower outlets and a lever type operating member. Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
241004033
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP(F)
Marking:
Villeroy & Boch logo on operating member
Installation Requirements:
R001 R020
Expiry date:
31/10/2029
Model:
TVS107002000XX Liberty XX= Finishing 61= Chrome 64=Brushed Nickel 76=Brushed gold K5= Matt black
Product Images

Approval Holder:
Villeroy & Boch AG
Company Name
Villeroy & Boch AG
Address
Saaruferstraße 1-3 Mettlach
Postcode
66693
Country
Germany
Phone
+49 151 16775778
General Email
Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Print This Approval


#241188007

Range of wall mounted, concealed, manually operated blending valves (brass bodies) incorporating a ceramic cartridge headwork with a single lever operating member. Maximum working pressure: 10.0 bar. Maximum operating pressure: 60oC.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
241188007
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1/2" BSP (F).
Marking:
Villeroy & Boch on operating member
Installation Requirements:
R001 R010 R040
Expiry date:
30/11/2029
Model:
TVS103352000xx – Architectura, TVS104352000xx - O.novo, TVS106352110xx – Dawn, TVS106352113xx - Loop & Friends, TVS127004000xx – Conum, TVS112002000xx - Subway 3.0, TVS125002000xx - Architectura Square, TVS107004000xx – Liberty, TVS111004000xx – Antao, TVS122001000xx - Empora 2.0. The above are to be used with: TVS00035100000 - Universal Taps & Fittings Vi-Box Vi-Box universal concealed installation unit for single-lever. Where xx denotes the surface finish (which is a non-water contact part): 61 = Chrome, 74 = Brushed Chrome, 64 = Brushed Nickel Matt, 65 = Polished Nickel, 60 = English Gold, 76 = Brushed Gold, K5 = Matt black, 70 = Dune, 63 = Graphite

Approval Holder:
Villeroy & Boch AG
Company Name
Villeroy & Boch AG
Address
Saaruferstraße 1-3 Mettlach
Postcode
66693
Country
Germany
Phone
+49 151 16775778
General Email
Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 62 of 101

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.