Directory Search Results

Print List

#2312913

“CZ 3000” range of water meters with brass bodies and plastic turbines. The inlets incorporate plastic filters. The outlets are fitted with approved check-valve cartridges (however, the complete product has not been fully tested for and is not intended to provide backflow protection). Maximum working pressure 16.0 bar. Maximum operating temperature 30°C.

Section:
1505 Water Meters
Size:
See models.
Marking:
CONTAZARA, date of manufacture (yyyy) on plastic body, PN, “CZ3000s”, size and flow arrow.
Installation Requirements:
R001
Expiry date:
31/12/2028
Model:
Series “CZ 3000” consisting of following articles: CZ3000 15mm K2 brass (3/4”–¾”), CZ3000 15mm K3 brass (3/4”–¾”), CZ3000 15mm K4 brass (7/8” – 3/4"), CZ3000 25mm brass (1 1/4” - 1 1/4”), CZ3000 32mm brass (1 1/2" - 1 1/2"), CZ3000 40mm brass (2” – 2”).

Approval Holder:
Contazara SA
Company Name
Contazara SA
Address
Ctra Castellon Km 5,5. 50720 Zargosa
Country
Spain

View All Listings by this Company
Manufacturer:
Contazara SA
Company Name
Contazara SA
Address
Ctra Castellon Km 5,5. 50720 Zargosa
Country
Spain

View All Listings by this Company

Print This Approval


#2312365

Range of water meter manifolds with plastic bodies which incorporates a (spherical) stop valve. The MB40408256BM, MB40408254NM, MB40408326BM, MB40408324BM, MB40425256BM MB40425254BM, MB40432326BM and MB40432324BM models incorporate a non-return valve. The MB40408255DCVBM and MB40408254DCVBM models incorporate two non-return valves. The product is supplied with pipe liners for use with the pushfit connections. The pushfit connections are for use with PE80 pipes (manufactured to BS EN 12201). Maximum working pressure 16.0 bar. Cold water use only.

Section:
1510 Water Meter Manifolds
Size:
MB40425254BM & MB40425256BM: 25mm pushfit. MB40432324BM & MB40432326BM: 32mm pushfit. All other models: 2” BSP (F).
Marking:
Atlantic Plastics logo on body. Talbot and size marked on pushfit connections.
Installation Requirements:
R001
Expiry date:
31/12/2028
Model:
MB40408256BM: Multi Manifold 6 Port - 2” BSP inlet x 6 outlet (25mm Willow type 2 Bend), MB40408254NM: Multi Manifold 4 Port - 2” BSP inlet x 4 outlet (25mm Willow type 2 Bend), MB40408326BM: Multi Manifold 6 Port - 2” BSP inlet x 6 outlet (32mm Solid type 1 Bend), MB40408324BM: Multi Manifold 4 Port - 2” BSP inlet x 4 outlet (32mm Solid type 1 Bend), MB40408255DCVBM: Multi Manifold 6 Port - 2” BSP inlet x 6 outlet (25mm Willow type 2 Bend), MB40408254DCVBM: Multi Manifold 4 Port - 2” BSP inlet x 4 outlet (25mm Willow type 2 Bend), MB40425256BM: Multi Manifold 6 Port - 6 Inlet x 6 Outlet (25mm Willow type 2 Bend), MB40425254BM: Multi Manifold 4 Port - 4 Inlet x 4 Outlet (25mm Willow type 2 Bend), MB40432326BM: Multi Manifold 6 Port - 6 Inlet x 6 Outlet (32mm Solid type 1 Bend), MB40432324BM: Multi Manifold 4 Port - 4 Inlet x 4 Outlet (32mm Solid type 1 Bend).

Approval Holder:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company
Manufacturer:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company

Print This Approval


#2312351

‘Tanktronic‘ range of water level monitoring kits comprising of a main control unit, vent box and single or double stainless steel sensors. Open outlet use only. Maximum operating temperature 23°C

Section:
1530 Miscellaneous Fittings
WRAS Approval Number:
2312351
Note:
IRN R008 only applies to the sensors.
Size:
24.50MM OD (sensor outer diameter – product has no water connections).
Marking:
Tanktronic, Keraflow, model, serial no & production info on sensor box & vent box assembly.
Installation Requirements:
R001 R008
Expiry date:
31/12/2028
Model:
TT/41 - Tanktronic Main Control Unit with Single 3m Sensor and Vent box assembly, TT/42 - Tanktronic Main Control Unit with Single 5m Sensor and Vent box assembly, TT/43- Tanktronic Main Control Unit with Twin 3m Sensor and Vent box assembly, TT/44 - Tanktronic Main Control Unit with Twin 5m Sensor and Vent box assembly.

Approval Holder:
Cistermiser Ltd
Company Name
Cistermiser Ltd
Address
Unit 1 Woodley Park Estate, 59/69 Reading Road Woodley
Postcode
RG5 3AN
Country
United Kingdom
General Email
jake.felstead@cistermiser.co.uk

View All Listings by this Company
Manufacturer:
Cistermiser Ltd
Company Name
Cistermiser Ltd
Address
Unit 1 Woodley Park Estate, 59/69 Reading Road Woodley
Postcode
RG5 3AN
Country
United Kingdom
General Email
jake.felstead@cistermiser.co.uk

View All Listings by this Company

Print This Approval


#2312902

‘SCALA1 TWIN’ range of booster pump sets, comprising of two pumps with plastic bodies, plastic impellers, EPDM and NBR ‘O’-rings and an accessory set consisting of a base plate, plastic manifold and four brass spherical valves. Each pump incorporates a non-return valve. Maximum working pressure 8.0 bar. Cold water use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
2312902
Note:
R415 only apllies to the complete booster pump sets.
Size:
1¼” BSP (F) manifold inlet/outlet.
Marking:
Pumps: Grundfos and Grundfos logo on body. Grundfos and Grundfos logo, model no., and other technical information on adhesive label on body. SCALA1 Twin accessory set: Grundfos logo, Grundfos, SCALA1 and SCALA2 on base plate. .
Installation Requirements:
R001 R415
Expiry date:
31/12/2028
Model:
SCALA1 TWIN 3-25, SCALA1 TWIN 3-35, SCALA1 TWIN 3-45, SCALA1 TWIN 5-25, SCALA1 TWIN 5-35, SCALA1 TWIN 5-55. Where 3 or 5 = flow rate in m³/h and 25-55 = max. head (m) on the individual pumps. The models are supplied with either of the following accessory sets: SCALA1 Twin accessory set (99725165), SCALA2 Twin accessory set (99743076).

Approval Holder:
Grundfos Holding A/S
Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7 Bjerringbro
Postcode
DK-8850
Country
Denmark
Phone
+36302482216
General Email
oszilagyi@grundfos.com

View All Listings by this Company

Print This Approval


#2312044

Range of wall mounted shower kits, (brass bodies - various finishes), consisting of an overhead shower, handset and hose. The product is supplied with a fixed riser assembly and incorporates a manual diverter valve using a push button mechanism. The shower handset incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The shower handset and overhead shower incorporates a stainless-steel strainer and a plastic flow regulator.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
2312044
Note:
Open outlet use only.
Size:
1/2" BSP (M)
Marking:
Hansgrohe logo on hand shower, overhead shower and riser.
Installation Requirements:
R001 R040
Expiry date:
31/12/2028
Model:
27 270 xx0 27 289 xx0 27 795 xx0 Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish. MODEL ADDED APRIL 2025: 28 074 xx0

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company
Manufacturer:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 604 of 1304

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.