Directory Search Results

Print List

#240204028

Range of water meter housings. The 4414-WMH-20 (threaded) model has a DZR brass body and a check valve cartridge on the inlet verified by test (suitable for backflow protection against Fluid Category 2). The 4414-WMH-1 & 4414-WMH-2 (compression) models have a brass body and an approved check valve cartridge on the inlet, however, the complete product has not been fully tested to demonstrate that it provides adequate backflow protection. The compression models are for use with copper pipe (manufactured to EN 1057). Maximum operating pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1510 Water Meter Manifolds
Size:
see model
Marking:
Eagle and flow arrow on body. The 4414-WMH-20 model is also marked CR.
Installation Requirements:
R001
Expiry date:
28/02/2029
Model:
4414-WMH-1: 15mm compression, 4414-WMH-2: 22mm compression, 4414-WMH-20: ¾” BSP (F).

Approval Holder:
SCE Technology (Ningbo) Co., Ltd
Company Name
SCE Technology (Ningbo) Co., Ltd
Address
No.32 Yuanqu Road Cha Lu Industrial Zone Ninghai Ningbo Zhejiang
Country
China

View All Listings by this Company

Print This Approval


#240204050

Range of wall & floor mounted, two hole, single outlet combination tap assemblies with brass bodies incorporating ceramic cartridge headworks with single lever operating members. Spout incorporates a plastic aerator. Products also incorporate an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with shower hose and handset. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
1530 Miscellaneous Fittings
Size:
½” BSP (M).
Marking:
Gessi on handle.
Installation Requirements:
R001 R010 R030
Expiry date:
28/02/2029
Model:
65113 (wall mounted), 65128 (floor mounted) + 65099 (floor mounting plate / roughing set).

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company

Print This Approval


#240208003

Range of flow sensors with plastic bodies and rotors. Maximum working pressure: 10 Bar. Maximum operating temperature: 80°C.

Section:
1530 Miscellaneous Fittings
Size:
See model.
Marking:
Resideo, Model, Max temperature, Max pressure & made in Japan on the front face.
Installation Requirements:
R001
Expiry date:
28/02/2029
Model:
C7195A 2001 – 1/2” BSP (M). C7195B 1001 – 3/4” BSP (M). C7195C 1009 – cartridge only, to be inserted in a ø25.2 mm manifold.

Approval Holder:
Pittway Sarl
Company Name
Pittway Sarl
Address
A3 - ZA La Pièce 6 1180 Rolle
Country
Switzerland

View All Listings by this Company

Print This Approval


#240208005

Range of EEICo brass threaded fittings. Maximum working pressure 20.0 bar. Maximum operating temperature 60°C.

Section:
1530 Miscellaneous Fittings
Size:
See models.
Marking:
EEICo, size and made in KSA on body and EEICo on the nut.
Installation Requirements:
R001
Expiry date:
28/02/2029
Model:
Elbow 90⁰ ½” – 1” BSP F x F FXM Elbow ½” – 1 ¼” BSP M x F Valve tail and tail nut ½” – 1 ¼” BSP M x F Straight connector ½” – 1 ¼” BSP M x M

Approval Holder:
Elite Experts Industry Company (EEICo).
Company Name
Elite Experts Industry Company (EEICo).
Address

View All Listings by this Company
Manufacturer:
Elite Experts Industry Company (EEICo).
Company Name
Elite Experts Industry Company (EEICo).
Address

View All Listings by this Company

Print This Approval


#240206001

Range of stainless steel bodied mechanical pump shaft seals. The 491 model comprises of carbon and silicone carbide seal faces and EPDM ‘O’-rings. The 1510 model comprises of carbon and silicone carbide seal faces, EPDM ‘O’-rings and an orange NBR/aramid fibre gasket. Maximum operating temperature 100°C.

Section:
1530 Miscellaneous Fittings
Size:
491: 16 - 110mm. 1510: 25 - 120mm.
Marking:
491: Chesterton on body. 1510: Chesterton on tabs.
Installation Requirements:
R001
Expiry date:
28/02/2029
Model:
491 - Chesterton 491 DINS-DINL rotary internal single seal. 1510 - Chesterton 1510 General Duty Single Cartridge Seal with orange NBR/aramid fibre Gasket.

Approval Holder:
Chesterton International GmbH
Company Name
Chesterton International GmbH
Address
Am Lenzenfleck 23, DE-85737 Ismaning
Country
Germany

View All Listings by this Company

Print This Approval


#240207701

‘SCALA 2’ integrated, self-priming, plastic bodied (compact) mains pressure boosting pump. Maximum working pressure 10.0 bar. Cold water use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
240207701
Size:
1” BSPT (M) inlet and outlet.
Marking:
Grundfos and Grundfos logo on body. Grundfos and Grundfos logo, type, Model, P/N no., Serial no., P/C no., technical info, manufacturing country and data matrix on adhesive label on end of motor housing.
Installation Requirements:
R001 R415
Expiry date:
28/02/2029
Model:
Scala2 Model2 3-45 AKCCDE, Scala2 Model2 3-45 AKCDDE, Scala2 Model2 3-45 AKCGDE.

Approval Holder:
Grundfos Holding A/S
Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7 Bjerringbro
Postcode
DK-8850
Country
Denmark
Phone
+36302482216
General Email
oszilagyi@grundfos.com

View All Listings by this Company

Print This Approval


#240507701

`UPM3` range of single stage circulator pumps, with stainless steel or plastic bodies, plastic impellers, ceramic shafts and bearings, EPDM 'O'-rings and seals. Maximum working pressure 10.0 bar. Maximum operating temperature 99°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
240507701
Size:
Stainless steel body models (N): 1" BSP (M) (retrospectively added June 2024), 1½” BSP (M) & 2” BSP (M). Composite (plastic) body models (CIL3): 1” BSP (M).
Marking:
Grundfos logo, Grundfos and model on top of pump housing. Production number, serial number, and technical information on side of pump housing. Stainless steel models also have a flow arrow on the body.
Installation Requirements:
R001
Expiry date:
31/05/2029
Model:
UPM3 **1-**2 N ***3 (GFNxx-). UPM3 **1-**2 - CIL3 ***3 (GFNxx-). Model added November 2024: ALPHA SOLAR 25-**2 N 180. Where: UPM3 & ALPHA SOLAR = pump type. For UPM3 these can also be: UPM3 HYBRID, UMP3 DHW, UPM3 K, UPM3 AUTO L UPM3 FLEX AS. **1 = size of inlet/outlet connection: N models – 25 = 1 ½”, 32 = 2”. CIL3 models – 15 = 1”. **2 = maximum head (dm): 20, 40, 50, 60, 70, 75 (all models). 105, 145 (stainless steel body models only). N = stainless steel body. CIL3 = composite (plastic) body. ***3 = port to port length in mm: 130 (all models) or 180 (ALPHA SOLAR 1½” model and 2” N models only).

Approval Holder:
Grundfos Holding A/S
Company Name
Grundfos Holding A/S
Address
Poul Due Jensens Vej 7 Bjerringbro
Postcode
DK-8850
Country
Denmark
Phone
+36302482216
General Email
oszilagyi@grundfos.com

View All Listings by this Company

Print This Approval


#240204011

Range of shower handset with chrome plated or white plastic bodies. Colour coding discs are located on the face plates of specific models. Maximum operating temperature 60°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240204011
Note:
Open outlet use only. The products have not been tested or approved for claims of sterile or anti-microbial properties made by the approval holder.
Size:
½” BSP (M)
Marking:
T-Safe on body
Installation Requirements:
R001 R040
Expiry date:
28/02/2029
Proviso:
The models listed on this approval fall under the scope of the GB Biocidal Products Regulations (GB BPR) by either incorporating or producing an active substance and/or incorporating a treated article. The product(s) has/have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which the active substance and/or treated article is present. WRAS accepts no liability for the material meeting the requirements of the GB Biocidal Products Regulations.
Model:
02-071215: Hand shower C-L “Hygiene” - No colour code on the spray plate. 02-071216: Hand shower C-L “Hygiene” - Violet colour code on the spray plate. 02-071217: Hand shower C-L “Hygiene” - Yellow colour code on the spray plate. 02-071218: Hand shower C-L “Hygiene” - Green colour code on the spray plate. 02-071219: Hand shower C-L “Hygiene” - Blue colour code on the spray plate. 02-071220: Chrome plated Hand shower C-L “Hygiene” - No colour code on the spray plate.

Approval Holder:
T-safe A/S
Company Name
T-safe A/S
Address
Gydevang 1, Alleroed
Postcode
3450
Country
Denmark
Phone
+45 61610518
General Email
moj@t-safe.com

View All Listings by this Company
Manufacturer:
T-safe A/S
Company Name
T-safe A/S
Address
Gydevang 1, Alleroed
Postcode
3450
Country
Denmark
Phone
+45 61610518
General Email
moj@t-safe.com

View All Listings by this Company

Print This Approval


#240204020

Range of shower handsets with either a white or chrome plated plastic body. Maximum operating temperature 45°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240204020
Size:
½” BSP (M).
Marking:
Mira Showers on body.
Installation Requirements:
R001 R040
Expiry date:
28/02/2029
Model:
1336281: Nectar 110 Showerhead (White), 1378792: Nectar 110 Showerhead (Chrome).

Approval Holder:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company
Manufacturer:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company

Print This Approval


#240202056

Range of overhead shower outlets with chromium plated plastic bodies. The inlets incorporate combined EPDM washers and stainless-steel strainers. Maximum working pressure: open outlet use only Maximum operating temperature 60°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
240202056
Note:
Product to be used in combination with AXOR ShowerSolutions Basic set for overhead shower with shower arm 35361180 (W0758026).
Size:
12.59mm OD
Marking:
Axor on body.
Installation Requirements:
R001 R040
Expiry date:
28/02/2029
Model:
12 596 xx0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 603 of 1179

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.