Wall elbow with a chrome plated brass body and NBR O-rings, the inlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Open outlet use

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1530 Miscellaneous Fittings

Size:

½” BSP male inlet/outlet

Marking:

Dornbracht on face plate

Installation Requirements:

R001

Expiry date:

31/05/2028

Model:

28450832

Product Images

Approval Holder:

Dornbracht AG & Co. KG

Company Name

Dornbracht AG & Co. KG

Address

Koebbingser Muehle 6 Iserlohn

Postcode

D-58640

Country

Germany

Phone

+49 2371 433 0

General Email

wpape@dornbracht.com

View All Listings by this Company

Range of wall unions with chrome plated brass bodies. Maximum operating temperature 60°C Open outlet use only

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1530 Miscellaneous Fittings

Size:

½” BSP(M)

Marking:

Grohe on body

Installation Requirements:

R001 R040

Expiry date:

31/05/2028

Model:

28626000 28636000 28628000 28671000

Product Images

Approval Holder:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Country

Germany

Phone

02372 930

General Email

marc.engelhardt@lixil.com

View All Listings by this Company

Manufacturer:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Country

Germany

Phone

02372 930

General Email

marc.engelhardt@lixil.com

View All Listings by this Company

Range of level and flow transmitters with plastic bodies. Maximum working pressure 3.0Bar

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1530 Miscellaneous Fittings

Size:

1 ½” BSP (M) 1 ½” NPT (M)

Marking:

EMERSON Rosemount logo, model number and other technical information on body.

Installation Requirements:

R001

Expiry date:

31/05/2028

Model:

Rosemount 1208A Rosemount 1208C

Approval Holder:

Rosemount Tank Radar AB

Company Name

Rosemount Tank Radar AB

Address

Layoutvägen 1, 43533 Mölnlycke Sweden

View All Listings by this Company

Flow regulator with a plastic body. 4.0 - 8.5L/min. Claims of flow regulation performance made by manufacturer have note been tested and are not covered as part of this approval.

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

2305913

Size:

Ø20.37 x 19.33mm

Marking:

HL2024 FC (brand of HaGePe) on body

Installation Requirements:

R001

Expiry date:

31/05/2028

Model:

HL2024

Approval Holder:

HaGePe International B.V (HGP International)

Company Name

HaGePe International B.V (HGP International)

Address

Huizermaatweg 27-2 1273 NA Huizen

Country

Netherlands

View All Listings by this Company

Concealed wall mounted rough inset with a brass body, incorporating EDPM O-rings. Maximum working pressure 5.0 Bar

Non-metallic materials and components comply with BS6920 at 85°C

Section:

1535 Miscellaneous

Section Subtitle:

Tap accessories.

WRAS Approval Number:

2305069

Size:

½” BSP F Inlets

Marking:

SHS logo on body

Installation Requirements:

R001 R010 R040

Expiry date:

31/05/2028

Model:

T2020-IS-XX Where the product code suffix ‘XX’ denotes the product is unfinished

Product Images

Approval Holder:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Country

United Kingdom

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Manufacturer:

Samuel Heath & Sons Plc

Company Name

Samuel Heath & Sons Plc

Address

100 Leopold Street Birmingham

Postcode

B12 0UJ

Country

United Kingdom

Phone

+44 (0) 1217 662 200

General Email

kay.stead@samuel-heath.com

View All Listings by this Company

Range of single (SSR) and twin (STR) ended shower booster pumps with plastic bodies, stainless steel motor shaft, plastic impellors and NBR ‘O’-rings. Supplied with stainless steel strainers. Maximum working pressure 3.0 Bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2305012

Size:

Stainless steel braided EPDM lined flexible hose assemblies incorporating a 22mm pushfit connection.

Marking:

Grundfos logo, model and other technical information on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

31/05/2028

Model:

STR2-1.5 C, STR2-2.0 C, SSR2-2.0 C.

Product Images

Approval Holder:

Grundfos Watermill Ltd.

Company Name

Grundfos Watermill Ltd.

Address

Enterprise Way Edenbridge

Postcode

TN8 6HF

Country

United Kingdom

Phone

01525 775425

General Email

rpeters@grundfos.com

View All Listings by this Company

Manufacturer:

Grundfos Watermill Ltd.

Company Name

Grundfos Watermill Ltd.

Address

Enterprise Way Edenbridge

Postcode

TN8 6HF

Country

United Kingdom

Phone

01525 775425

General Email

rpeters@grundfos.com

View All Listings by this Company

Range of vertical multistage pumps with either stainless-steel bodies (“N” versions) or cast iron bodies with a black electrodeposition coating (“G” versions), stainless-steel impellers, shaft and outer sleeve. Maximum working pressure: EV30, EV45, 30VR & 45VR models - 32.0 bar, EV65, EV95, 65VR & 95VR models - 25.0 bar. Max operating temperature: Stainless steel (“N” versions) - 100°C. Cast iron (“G” versions) - Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2305073

Size:

DN65 - DN100

Marking:

Franklin electric S.r.l logo, serial number, model number, date of manufacture (DD/MM/YYYY) and pressure on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/05/2028

Model:

EV and VR ranges. Code example (EV range): EV 30 /13 A B C D E F G H J K L M N. Where: EV = Pump model EV (EV = E-Tech “brand”). 30 = Rated flow [m³/h] (varies: 30-95). /13 = No. of stages/impellers. (See model and stages below for more detail). A = No. of trimmed impellers, if "Empty" = none. B = Flange type: "F" - round. C = Materials: "G" - (cast iron/Stainless steel); "N" - (AISI316/EN1.4401). D = Motor power (kW x 10). E = Motor type: “Vacuum” (pump without motor), "T" - 3-phase; "M" - 1-phase. F = Frequency: "5" - 50Hz; "6" - 60Hz. G = No. of motor poles: "Empty" - 2 poles; "4" - 4 poles. H = Mechanical Seal: "B" (balanced). J = Elastomeric and mechanical seal material: E1 (SiC-Carbon Graphite-EPDM) or E2 (SiC-SiC-EPDM). K = “IE…” motor efficiency class IEC60034-30, where applicable, “Vacuum” (pump without motor). L = “Vacuum” standard version,“M” (oversized motor). M = "Vacuum” - standard version. N = Motor voltage, “Vacuum” (pump without motor). EV30: stage from 1 to 13 (50Hz) and from 1-1A to 8 (60Hz); EV45: stage from 1-1A to 13-2A (50Hz) and from 1-1A to 7 (60Hz); EV65: stage from 1-1A to 8 (50hz) and from 1-1A to 5-1A(60 hz); EV95: stage from 1-1A to 6 (50Hz) and from 1-1A to 4-2A (60Hz). Code example (VR range): 30 VR0700 A B C X-XXXX. Where: 30 = Rated flow [m³/h] (varies: 30-95). VR = Pump model (VR = FPS “brand”). 07 = No. of stages/impellers. (See model and stages below for more detail). 00 = Impeller trim: 00 = no trim, A1 = 1A (one trimmed impeller), A2 = 2A (two trimmed impellers). A = Materials: "G" - (cast iron/304SS); "N" - (AISI316/EN 1.4401). B = Flange type: "F" - round. C = Mechanical Seal: “A” - (BQBE, BE1); “B” - (BQQE, BE2). X-XXXX = Combination of numbers and letter relating to frame, speed, motor and electronics (does not affect water pathways). Last two digits can be empty for versions without a motor. 30VR: stage from 1 to 13 (50Hz) and from 1-1A to 8 (60Hz); 45VR: stage from 1-1A to 13-2A (50Hz) and from 1-1A to 7 (60Hz); 65VR: stage from 1-1A to 8 (50hz) and from 1-1A to 5-1A (60Hz); 95VR: stage from 1-1A to 6 (50Hz) and from 1-1A to 4-2A (60Hz).

Product Images

Approval Holder:

Franklin Electric SRL

Company Name

Franklin Electric SRL

Address

Via Asolo 7 Dueville Vicenza 36031

Country

Italy

Phone

+39 0444 360366

General Email

info.it@fele.com

View All Listings by this Company

Manufacturer:

Franklin Electric SRL

Company Name

Franklin Electric SRL

Address

Via Asolo 7 Dueville Vicenza 36031

Country

Italy

Phone

+39 0444 360366

General Email

info.it@fele.com

View All Listings by this Company

Single stage centrifugal pump, with plastic impellers. The pump is equipped with ceramic bearings; the body and shaft are made of stainless steel. The product is supplied with loose fibre/NBR inlet/outlet gaskets. Maximum working pressure 10.0 bar. Maximum operating temperature 99°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2311900

Size:

2” BSP (M) inlet/outlet

Marking:

Grundfos and Grundfos logo, type, model, production number, technical info and manufacturing country on data plate on top of motor housing. Flow arrow on body.

Installation Requirements:

R001 R415

Expiry date:

30/11/2028

Model:

UPS 32 -100 N 180

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of circulator pumps with stainless steel bodies and a plastic impeller. All models are available with a plastic (composite) rotor can, the MAGNA1 range is also available with a stainless-steel rotor can in the DN32 flanged, threaded 1½ & 2” sizes only. The MAGMA3 models have a differential pressure sensor. Maximum working pressure 10.0 bar. Maximum operating temperature 99°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2305910

Size:

Flanged: DN32, DN40, DN50, DN65. Threaded: 1 ½” & 2” BSP (M).

Marking:

Grundfos and Grundfos logo on motor housing. Grundfos Holdings A/S and address, type, model, Product No., Serial No., production date (YYWW), manufacturing country and other technical information on data plate on motor control box.

Installation Requirements:

R001

Expiry date:

31/05/2028

Model:

MAGNA1 XX1-XX2 N XXX3, MAGNA1 XX1-XX2 F N XXX3, MAGNA3 XX1-XX2 N XXX3, MAGNA3 XX1-XX2 F N XXX3. Where: MAGNA1 = pump type (without sensor), MAGNA3 = pump type (with differential pressure sensor). XX1 = Nominal diameter (DN) of inlet/outlet ports (mm). XX2 = Max. head (dm). Blank or F = Blank - threaded, F - Flanged connection. N = Stainless steel pump housing. XXX3 = Port to port length (mm). Full model list below: MAGNA3 32-120 F N 220, MAGNA3 40-80 F N 220, MAGNA3 40-100 F N 220, MAGNA3 40-120 F N 250, MAGNA3 40-150 F N 250, MAGNA3 40-180 F N 250, MAGNA3 50-40 F N 240, MAGNA3 50-60 F N 240, MAGNA3 50-80 F N 240, MAGNA3 50-100 F N 280, MAGNA3 50-120 F N 280, MAGNA3 50-150 F N 280, MAGNA3 50-180 F N 280, MAGNA3 65-40 F N 340, MAGNA3 65-60 F N 340, MAGNA3 65-80 F N 340, MAGNA3 65-100 F N 340, MAGNA3 65-120 F N 340, MAGNA3 65-150 F N 340, MAGNA1 25-40 N 180, MAGNA1 25-60 N 180, MAGNA1 25-80 N 180, MAGNA1 25-100 N 180, MAGNA1 25-120 N 180, MAGNA1 32-40 N 180, MAGNA1 32-60 N 180, MAGNA1 32-80 N 180, MAGNA1 32-100 N 180, MAGNA1 32-40 F N 220, MAGNA1 32-60 F N 220, MAGNA1 32-80 F N 220, MAGNA1 32-100 F N 220, MAGNA1 32-120 F N 220, MAGNA1 40-40 F N 220, MAGNA1 40-60 F N 220, MAGNA1 40-80 F N 220, MAGNA1 40-100 F N 220, MAGNA1 40-120 F N 250, MAGNA1 40-150 F N 250, MAGNA1 40-180 F N 250, MAGNA1 50-40 F N 240, MAGNA1 50-60 F N 240, MAGNA1 50-80 F N 240, MAGNA1 50-100 F N 280, MAGNA1 50-120 F N 280, MAGNA1 50-150 F N 280, MAGNA1 50-180 F N 280, MAGNA1 65-40 F N 340, MAGNA1 65-60 F N 340, MAGNA1 65-80 F N 340, MAGNA1 65-100 F N 340, MAGNA1 65-120 F N 340, MAGNA1 65-150 F N 340, MAGNA3 25-40 N 180, MAGNA3 25-60 N 180, MAGNA3 25-80 N 180, MAGNA3 25-100 N 180, MAGNA3 25-120 N 180, MAGNA3 32-40 N 180, MAGNA3 32-60 N 180, MAGNA3 32-80 N 180, MAGNA3 32-100 N 180, MAGNA3 32-40 F N 220, MAGNA3 32-60 F N 220, MAGNA3 32-80 F N 220, MAGNA3 32-100 F N 220, MAGNA3 40-40 F N 220, MAGNA3 40-60 F N 220, MAGNA1 32-120 N 180, MAGNA3 32-120 N 180.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of shower handsets with a chromium plated plastic body.

Non-metallic materials and components comply with BS6920 at 70°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2301085

Size:

½” BSP (M).

Marking:

Aqualisa on handset

Installation Requirements:

R001 R040

Expiry date:

31/01/2028

Model:

ACY2005 MIAN SQUARE SHOWER HANDSET

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company