Range of spherical valves with nickel-plated brass bodies, chrome plated brass balls, PTFE seat (SD3009 only) and NBR ‘O’-rings. The SD3009 models are screw-driver operated, the SD6011 model incorporate a short lever operating member. The compression connections are for use with copper pipes (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.
Range of non-rising spindle gate valves with brass bodies, incorporating PTFE stem packing and gaskets and handwheel operating members. Maximum working pressure 16.0 Bar Maximum operating temperature 85°C
Range of gate valves with ductile iron bodies (blue epoxy coated), EPDM coated wedge and EPDM O - rings. Maximum working pressure – 10.0 bar (DN900 and DN1000 only) and 16.0 bar (DN350 – DN800). Maximum operating temperature - 85°C
‘AQU Valves – LV16’ range of gate valves with DZR brass bodies and gate. The products incorporate a lockshield operating member. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C
Range of resilient seated gate valves with blue epoxy coated ductile iron body and an EPDM coated ductile iron wedge. Maximum working pressure 16.0 bar. Maximum operating temperature 70°C.
Range of gate valves with blue epoxy coated ductile iron bodies and either an EPDM coated brass wedge (¾” - 1¼” of ASCENT01 models) or EPDM coated ductile iron wedge (all other models). The ASCENT01 models incorporate a square operating nut and the ASCENT02 models incorporate a hand wheel operating member. Maximum working pressures: ASCENT01 models: 16.0bar, ASCENT02 models: 10.0 or 16.0bar. Maximum operating temperature 85°C.
Range of gate valves with a non-rising spindle with a handwheel operating member or lockshield connection. All models have brass bodies and brass wedge. For use with copper pipe (manufactured to EN1057). Maximum working pressure 16.0 bar.
Non-metallic materials and components comply with BS6920 at 85°C
Range of globe stop valves with a bronze bodies, brass stems and stem ring. The valves are operated via a rising spindle with a hand wheel operating member. Maximum working pressure 20 bar. Maximum operating temperature 85°C
Range of screw down stop valves with brass or DZR brass bodies. Valves incorporate EPDM seat washers and PTFE seals. Maximum working pressure: 16 bar. Maximum operating temperature: 95°C
Electrolytic scale inhibitor incorporating a chrome plated stainless steel body. Compression ends are for use with copper pipe (manufactured to EN1057). Maximum working pressure 8.0 bar. Maximum operating temperature 100°C.
Range of electronically controlled ion exchange water softeners (salt regenerated) for commercial and domestic use. Maximum working pressure 5.0 bar. Cold water use.
'Shalipoxy 400'. Factory applied, two-part beige coloured epoxy coating. Mix component A & B in a 3:1 volume ratio and apply as per manufacturer’s Application Methodology ‘R&D/AIN 004/2013’, dated ’01.05.2013’. Cure for 7 days@27°C. For use with water up to 23°C. his material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'ShaliPoxy 400 FG'. Factory applied, white coloured, two-component epoxy coating. Mix components A & B in a volume ratio of 3:1 and apply as per manufacturer’s TDS ‘0982019’. Cure for 7 days@27°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'ConProtect WP 1'. Liquid concrete admixture based on crystallization technology. To be added at a maximum of 2% of the cement weight as per manufacturer's TDS 'Version 3 - 2025'. Cure for 14 days@23°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'Sungil Korea 2026 Premium Tank Panel'. Light grey coloured, hot press moulded GRP panel. For use with water up to 55°C.
'Sangwon Korea 2026 Premium One Tank Panel'. Light grey coloured, hot press moulded GRP panel. For use with water up to 55°C.
'TECNITE SC 250 W Lubricating Grease'. Uncoloured (translucent) silicone oil/grease. Apply as per manufacturer's instructions. For use with water up to 85°C.
'Ryton XE7730BL'. Black coloured, injection moulded PPSU material. For use with water up to 85°C.
'PVDF Solef® 1008/0UP1'. White/off-white coloured (translucent), injection moulded PVDF material. For use with water up to 85°C.
'Foodgum/55/N'. Black coloured, compression moulded butyl rubber material. Shore hardness 55. Tested in-radius size 1.0mm. For use with water up to 23°C.
Page 586 of 590
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
