Directory Search Results

Print List

#2312329

Range of EBCO stop valves with gunmetal bodies with a various end connections. Maximum working pressure 16 bar. Cold water use only.

Section:
2310 Valves
Section Subtitle:
Stop, metal, screw down.
WRAS Approval Number:
2312329
Size:
½” – 2” BSP (F) 25mm, 50mm and 63mm Push Fit 20mm, 50mm and 63mm Poly B
Marking:
EBCO, flow arrow, size BS5433 and DOM (MM/YY) etched on valve body.
Installation Requirements:
R001
Expiry date:
31/12/2028
Model:
GM STOPVALVE TO BS5433 CR/HEAD, BSP FEMALE ENDS SV5402FCR SV5403FCR SV5404FCR SV5406FCR SV5408FCR GM STOPVALVE TO BS5433 CR/HEAD, B-P/FIT ENDS SV5425ZCR, SV5450ZCR SV5463ZCR GM STOPVALVE TO BS5433 CR/HEAD, EBCO POLY B ENDS SV5420BCR SV5450BCR SV5463BCR

Approval Holder:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company
Manufacturer:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company

Print This Approval


#2312010

Tenant valve assemblies with a DZR brass body consisting of water meter manifold, servicing valve and a pressure reducing valve (adjustable between 1.0 and 6.0 bar). The inlet incorporates two approved check valve cartridges, verified by test (suitable for backflow protection against Fluid Category 3). Maximum working pressure 16.0 bar.

Section:
2345 Valves
Section Subtitle:
Special combination assemblies.
WRAS Approval Number:
2312010
Size:
Please refer to model.
Marking:
SYR logo, flow arrow, DR and supplier number on body. RWC logo, PN and temperature on cap of pressure relief valve.
Installation Requirements:
R001 R120
Expiry date:
31/12/2028
Model:
TVAP200075 – ¾” BSP (F) inlet/outlet TVAP200080 – 1” BSP (F) inlet/outlet

Approval Holder:
Reliance Worldwide Corporation
Company Name
Reliance Worldwide Corporation
Address
Horton Road, West Drayton
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company

Print This Approval


#240102713

‘MagCat’ range of in-line water conditioners with stainless steel bodies and catalytic alloy core. Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:
2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
Size:
Please refer to model.
Marking:
Magcat, flow arrow and serial number on adhesive label on body.
Installation Requirements:
R001 R120 R170
Expiry date:
31/01/2029
Model:
MagCat Range: MAT15BS - ½” BSP (M). MAT20BS - ¾” BSP (M). MAT25BS - 1” BSP (M). MAT32BS - 1¼” BSP (M). MAT40BS - 1½” BSP (M). MAT50BS - 2” BSP (M). MAT65PN - 2½” Flanged. MAT80PN - 3” Flanged. MAT100PN - 4” Flanged. MAT125PN - 5” Flanged. MAT150PN - 6” Flanged.

Approval Holder:
Fluid Dynamics International Ltd
Company Name
Fluid Dynamics International Ltd
Address
Unit 10 Hybris Bus Park Warmwell Rd Crossways Dorchester
Postcode
DT28BF
Country
United Kingdom
Phone
01305 520631
General Email
richardhall@fdiltd.com

View All Listings by this Company
Manufacturer:
Fluid Dynamics International Ltd
Company Name
Fluid Dynamics International Ltd
Address
Unit 10 Hybris Bus Park Warmwell Rd Crossways Dorchester
Postcode
DT28BF
Country
United Kingdom
Phone
01305 520631
General Email
richardhall@fdiltd.com

View All Listings by this Company

Print This Approval


#240102712

Electrolytic scale reducer, with a chromium plated copper body and zinc alloy anodes, for use with copper pipe (manufactured to BS EN1057) Maximum working pressure 10.0 bar. Cold water use only.

Section:
2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
Size:
15mm compression
Marking:
TrappeX on adhesive label on body
Installation Requirements:
R001 R120 R150 R170 R290
Expiry date:
31/01/2029
Model:
Trapscale15

Approval Holder:
Trappex Ltd.
Company Name
Trappex Ltd.
Address
59 Springwood Hall Gardens, Huddersfield
Postcode
HD1 4HA
Country
United Kingdom
General Email
info@trappex.co.uk

View All Listings by this Company

Print This Approval


#2312071

Range of inline water conditioners with zinc/copper alloy bodies. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 80°C

Section:
2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
Size:
Please refer to model
Marking:
Softerwater logo and WRAS on adhesive label on body
Installation Requirements:
R001 R120 R150 R170 R290
Expiry date:
31/12/2028
Model:
T5 Softerwater 1/2" BSPP Female Header T9-15 Softerwater 1/2" BSPP Female Header T9-20 Softerwater 3/4" BSPT Female Header T12-15 Softerwater 1/2" BSPP Female Header T12-20 Softerwater 3/4" BSPT Female Header T18 Softerwater 3/4" BSPT Female Header T34 Softerwater 3/4" BSPT Female Header T56 Softerwater 1"" BSPT Female Header T70 Softerwater 2" BSPT Female Header T100 Softerwater 2" BSPT Female Header T220 Softerwater 2" BSPT Female Header Showersoft Softerwater 1/2" BSPP Female/Male Header Appliancesoft Softerwater 1/2" BSPP Female/Male Header Appliance Softerwater 3/4" BSPP Female/Male Header T335 Softerwater 65mm Table E Flange T500 Softerwater 80mm Table E Flange T900 Softerwater 100mm Table E Flange P350 Softerwater 2" BSPT Female Header

Approval Holder:
Turbu-Flow Pty Ltd. T/A’s Softerwater
Company Name
Turbu-Flow Pty Ltd. T/A’s Softerwater
Address
3/12 Hampton Road Burleigh Heads Queensland
Postcode
4220
Country
Australia
Phone
+61 417 745 066
General Email
info@softerwater.com.au

View All Listings by this Company
Manufacturer:
Turbu-Flow Pty Ltd. T/A’s Softerwater
Company Name
Turbu-Flow Pty Ltd. T/A’s Softerwater
Address
3/12 Hampton Road Burleigh Heads Queensland
Postcode
4220
Country
Australia
Phone
+61 417 745 066
General Email
info@softerwater.com.au

View All Listings by this Company

Print This Approval


#2312328

Activflo Lite range of water conditioners with copper bodies. Models with compression connections are for use with copper pipe (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 100°C.

Section:
2410 Water conditioners, de-scalers, phosphate dosing, magnetic, electrolytic and electronic
Size:
See model
Marking:
Activflo, model and pressure on adhesive label on body.
Installation Requirements:
R001 R120 R150 R170 R290
Expiry date:
31/12/2028
Model:
Activflo Lite range comprising of models: AFL015 - 15mm compression. AFL022 - 22mm compression. AFL028 - 28mm compression. AFL012 - ½” BSP Male. AFL034 – ¾” BSP Male. AFL010 - 1” BSP Male.

Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Country
United Kingdom
Phone
01889272180
General Email
ryan.tilsley@intatec.co.uk

View All Listings by this Company

Print This Approval


#2309544

'KEPITAL F10-03H BBK & KEPITAL F10-03H BK'. Black coloured, injection moulded POM materials. For use with water up to 85°C. 'KEPITAL F10-52H'. Natural (appears white), injection moulded POM material. For use with water up to 40°C.

Section:
5015 Acetal
Section Subtitle:
Material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2309544
Expiry date:
30/09/2028

Approval Holder:
Korea Engineering Plastics Co. Ltd.
Company Name
Korea Engineering Plastics Co. Ltd.
Address
84, Jangsaengpo gorae-ro, Nam-Gu, Ulsan, 44781
Country
Korea, Republic of

View All Listings by this Company

Print This Approval


#2205577

'TIANYI SUNS-012'. Factory applied, black coloured, bituminous coating. Apply as per manufacturer's user instructions 'File No.: Tianyi Suns-0024, Version: TYS-03, Date of issue: 2021-05-05'. Cure for 2 hours @60°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5021 Bituminous Based Products
Section Subtitle:
Petroleum or asphaltic bitumen, NOT coal tar bitumen. Materials containing petroleum or asphaltic bitumen are not approved for use on water-retaining structures with large surface:volume ratio such as lining of pipes, cisterns or water storage tanks in contact with wholesome water, but may be acceptable for use where there is only a small surface area in contact with the water – e.g. taps, valves and pipe connectors.
WRAS Approval Number:
2205577
Expiry date:
31/05/2027

Approval Holder:
Tianyi Suns Pipe & Fittings Co., Ltd.
Company Name
Tianyi Suns Pipe & Fittings Co., Ltd.
Address
2802, Building B, Yangguangcheng No. 8, Changxingnanjie, Jinyuan District, Taiyuan, Shanxi
Country
China

View All Listings by this Company

Print This Approval


#240455001

'Hilox 961'. Brown coloured, dry pressed ceramic material. For use with water up to 85°C.

Section:
5023 Ceramic
Expiry date:
30/04/2029

Approval Holder:
Morgan Advanced Materials
Company Name
Morgan Advanced Materials
Address
Morgan Drive, Stourport on Severn
Postcode
DY13 8DW

View All Listings by this Company

Print This Approval


#2310564

'PPA571ES Black 700 & PPA571 Black 700'. Factory applied Polyolefin PE Coatings. Apply 'PPA571 Black 700' by fluidised bed according to manufacturer's data sheet '08/2022' and dip in the bed for 5-8 seconds. Apply 'PPA571ES Black 700' by electrostatic spray according to manufacturer's data sheet '08/2022'. Cure for 190-200°C for 20 mins. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5030 Coatings, Paints & Linings
Section Subtitle:
Factory applied pipe & fittings coatings.
WRAS Approval Number:
2310564
Expiry date:
31/10/2028

Approval Holder:
Plascoat Systems Ltd.
Company Name
Plascoat Systems Ltd.
Address
Farnham Trading Estate, Farnham, Surrey
Postcode
GU9 9NY
Phone
+44 (0) 1252 733 777
General Email
sales@plascoat.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 579 of 1014

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.