Directory Search Results

Print List

#2106063

Range of copper press fittings with EPDM rubber ‘O’-rings for use with copper pipe (manufactured to EN 1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1180 Fittings for use with Tube and Pipe
Section Subtitle:
Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2106063
Size:
15mm to 108mm
Marking:
RP - Rapid Press, WRAS Approved Product logo, Size & batch number.
Installation Requirements:
R001
Expiry date:
30/06/2026
Model:
CCP015 - CCP108 15 - 108mm. FRCP Reducer x press: 22mmx15mm - FRCP022015 28mmx15mm - FRCP028015 28mmx22mm - FRCP022022 35mmx22mm - FRCP035022 35mmx28mm - FRCP035028 42mmx22mm - FRCP042022 42mmx28mm - FRCP042028 42mmx35mm - FRCP042035 54mmx35mm - FRCP054035 54mmx42mm - FRCP054042 67mmx54mm - FRCP067054 76mmx67mm - FRCP076067 108mmx76mm - FRCP108076 SECP015 - SECP108 Bend 90° x press: 15 - 108mm. ECP015 - EPC108 Bend 90° press x press: 15 - 108mm. ETCP015 - ETCP108 Equal Tee 3 x press: 15 - 108mm. 6040 & 6040CP Bend 45° x press: 12 - 108mm. OECP015 - OECP108 Bend 45° press x press: 15 - 108mm. RTCP015015022 -RTCP108108076 Reducing Tee 3 x press: 15mmx22mmx15mm 22mmx15mmx22mm 28mmx15mmx28mm 28mmx22mmx28mm 35mmx15mmx35mm 35mmx22mmx35mm 35mmx28mmx35mm 42mmx22mmx42mm 42mmx28mmx42mm 42mmx35mmx42mm 54mmx28mmx54mm 54mmx35mmx54mm 54mmx42mmx54mm 67mmx54mmx67mm 76mmx67mmx76mm 108mmx76mmx108mm 6085 & 6085CP Full Crossover: 15mm x 15mm - 22mm x 22mm. 6086 & 6086CP Partial Crossover: 15mm x 15mm - 22mm x 22mm. 6510 & 6510CP Flange PN16: 76.1mm. Chrome plated models added 02/06/2023

Approval Holder:
Rapid Press Fittings Ltd
Company Name
Rapid Press Fittings Ltd
Address
2 Penrod Way Heysham
Postcode
LA3 2UZ

View All Listings by this Company

Print This Approval


#2309384

Range of copper or brass (see model) end feed fittings for use with copper tube (manufactured to BS EN1057). Tap connectors incorporate Fibre/NBR washers. Male and female union adaptors incorporate a silicone gasket. Maximum working pressure using hard solder: 8mm to 28mm, ½” to 1” BSP (F) or (M), 1” straight cylinder union and captive nut ½” to ¾”: 25.0 bar, 35mm to 54mm, 1¼” to 2” BSP (F) or (M): 16.0 bar. Maximum working pressure using silver brazing alloy EN1044: 66.7mm to 108mm, 2½” to 4” BSP (F) or (M): 16.0 bar, 133mm to 219mm: 10.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:
1210 Fittings for use with Tube and Pipe
Section Subtitle:
End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2309384
Size:
See model.
Marking:
Lawton tubes logo, EN1254 and size on body.
Installation Requirements:
R001
Expiry date:
30/09/2028
Model:
SB-EFCOMI0151/2 CORE 15mm X 1/2" Male Adaptor Brass N3015 SB-EFCOMI0153/4 CORE 15mm X 3/4" Male Adaptor Brass SB-EFCOMI0223/4 CORE 22mm X 3/4" Male Adaptor Brass N3022 SB-EFCOMI0281 CORE 28mm X 1" Male Adaptor Brass N3028 SB-EFCOMI03511/4 CORE 35mm X 1.1/4" Male Adaptor Brass SB-EFCOMI04211/2 CORE 42mm X 1.1/2" Male Adaptor Brass SB-EFCOMI0542 CORE 54mm X 2" Male Adaptor Brass SB-EFCP015 CORE 15mm Coupler EF N1015 SB-EFCP022 CORE 22mm Coupler EF N1022 SB-EFCP028 CORE 28mm Coupler EF N1028 SB-EFCP035 CORE 35mm Coupler EF SB-EFCP042 CORE 42mm Coupler EF SB-EFCP054 CORE 54mm Coupler EF SB-EFCP06 CORE 66.7mm Coupler EF SB-EFCP076 CORE 76.1mm Coupler EF SB-EFCP108 CORE 108mm Coupler EF SB-EFEC015 CORE 15mm End Cap EF N61015 SB-EFEL015 CORE 15mm 90° Elbow EF N12015 SB-EFEL022 CORE 22mm 90° Elbow EF N12022 SB-EFEL028 CORE 28mm 90° Elbow EF N12028 SB-EFEL035 CORE 35mm 90° Elbow EF N12035 SB-EFEL042 CORE 42mm 90° Elbow EF SB-EFEL054 CORE 54mm 90° Elbow EF SB-EFEL067 CORE 66.7mm 90° Elbow EF SB-EFEL076 CORE 76.1mm 90° Elbow EF SB-EFEL108 CORE 108mm 90° Elbow EF SB-EFELS015 CORE 15mm 90° Street Elbow EF N12S015 SB-EFELS022 CORE 22mm 90° Street Elbow EF N12S022 SB-EFRED02215 CORE 22mm X 15mm Fitting Reducer EF N6022015 SB-EFRED02822 CORE 28mm X 22mm Fitting Reducer EF N6028022 SB-EFTE015 CORE 15mm Equal Tee EF N24015 SB-EFTE022 CORE 22mm Equal Tee EF N24022 SB-EFTE028 CORE 28mm Equal Tee EF SB-EFTE035 CORE 35mm Equal Tee EF SB-EFTE042 CORE 42mm Equal Tee EF SB-EFTE054 CORE 54mm Equal Tee EF SB-EFTE067 CORE 66.7mm Equal Tee EF SB-EFTE076 CORE 76.1mm Equal Tee EF SB-EFTE108 CORE 108mm Equal Tee EF SB-EFTE0221522 CORE 22mm X 15mm X 22mm Reducer Tee EF N26022015022 SB-EFTE0222215 CORE 22mm X 22mm X 15mm Reducer Tee EF N25022015

Approval Holder:
Smith Brothers Stores Limited
Company Name
Smith Brothers Stores Limited
Address
Unit V2 Winchester Avenue, Blaby, Leicester
Postcode
LE8 4GZ

View All Listings by this Company
Manufacturer:
The Lawton Tube Company Ltd.
Company Name
The Lawton Tube Company Ltd.
Address
Torrington Avenue, Tile Hill, Coventry
Postcode
CV4 9AB
Phone
+44 24 7646 6203 or 024 7646 6203

View All Listings by this Company

Print This Approval


#250504712

Range of counter-top or under-sink electrical water heaters. Maximum working pressure 6.5 bar. Maximum operating temperature 75°C, except 65°C for 10L models.

Section:
1390 Heaters
Section Subtitle:
Electric, thermal storage, mains fed, open outlet.
WRAS Approval Number:
250504712
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1/2” BSP (M)
Marking:
Midea logo on body. Midea logo, Capacity, Model No.,Pressure, Other tech info on data label on body
Installation Requirements:
R001
Expiry date:
31/05/2030
Model:
Da-bcd a = Volume (available in 10, 15 & 30), b = Rated power (available in 20 & 30, 20 stands for 2kW, 30 for 3kW), c = Cover type (available in VD, VD2 & VD3), d = Installation position (available in O & U, O stands for over sink, U stands for under sink) Where a typical code is: ①D10-20VDO: 10 = volume (L) 20 = rated power (2kW) VD = the type of cover O = over sink range ②D30-30VD3U: 30 = volume (L) 30 = rated power (3kW) VD3 = the type of cover U = under sink range

Approval Holder:
Wuhu Midea Kitchen & Bath Appliances Manufacturing Co., Ltd.
Company Name
Wuhu Midea Kitchen & Bath Appliances Manufacturing Co., Ltd.
Address
Wanchun East Road Economic and Technological Development Zone Wuhu City Anhui Province
Country
China

View All Listings by this Company

Print This Approval


#2103043

Range of rotating piston, volumetric in-line water meters with brass bodies. Maximum working pressure 16.0 bar. Cold water use only.

Section:
1505 Water Meters
Size:
¾” BSP - 2” BSP (M) inlet and outlet.
Marking:
George Kent logo on lid. GKMV30, serial number, size, pressure and technical information on body housing rim.
Installation Requirements:
R001
Expiry date:
31/03/2026
Model:
GKMV30 - DN15, 20, 25, 30 & 40

Approval Holder:
George Kent (Vietnam) Co Ltd
Company Name
George Kent (Vietnam) Co Ltd
Address
F3-6 (Area A), Lot A4, NA1 Street Thoi Hoa Industrial Park, Thoi Hoa Ward, Ben Cat City Binh Duong Province
Country
Vietnam
Phone
+84 274 3803 167
General Email
lhpan@georgekent.net

View All Listings by this Company

Print This Approval


#2305096

GKMV30P range in-line volumetric water meters with black plastic bodies. Maximum working pressure 16.0 bar. Cold water use only.

Section:
1505 Water Meters
Size:
See model.
Marking:
GKM branded logo on lid. Flow direction arrow, Meter type (GKMV30P) & additional information on Chamber Housing.
Installation Requirements:
R001
Expiry date:
31/05/2028
Model:
GKMV30P Range: DN15: ¾" BSP (M) inlet and outlet, DN20: 1" BSP (M) inlet and outlet, DN25: 1¼" BSP (M) inlet and outlet.

Approval Holder:
George Kent (Vietnam) Co Ltd
Company Name
George Kent (Vietnam) Co Ltd
Address
F3-6 (Area A), Lot A4, NA1 Street Thoi Hoa Industrial Park, Thoi Hoa Ward, Ben Cat City Binh Duong Province
Country
Vietnam
Phone
+84 274 3803 167
General Email
lhpan@georgekent.net

View All Listings by this Company

Print This Approval


#2305097

GKMV30P range in-line volumetric water meters with black plastic bodies. Maximum working pressure 16.0 bar. Cold water use only.

Section:
1505 Water Meters
Size:
See model.
Marking:
GKM branded logo on lid. Flow direction arrow, Meter type (GKMV30P) & additional information on Chamber Housing.
Installation Requirements:
R001
Expiry date:
31/05/2028
Model:
GKMV30P Range: DN15: ¾" BSP (M) inlet and outlet, DN20: 1" BSP (M) inlet and outlet, DN25: 1¼" BSP (M) inlet and outlet.

Approval Holder:
George Kent (Malaysia) Berhad
Company Name
George Kent (Malaysia) Berhad
Address
George Kent Technology Centre 1115 Jalan Puchong Taman Meranti Jaya 47120 Puchong Selangor
Country
Malaysia

View All Listings by this Company

Print This Approval


#250515004

Range of electromagnetic water meters with stainless steel bodies. Maximum working pressure 16.0 bar. Cold water use only.

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
DN40 - DN300 flanged.
Marking:
Shanghai Reli Water Technology Co., Ltd logo (including ‘RELI’) on meter body. Shanghai Reli Water Technology Co., Ltd logo (including ‘RELI’), size, flow arrow and production date (YYYY-MM-DD) on data plate on transducer body.
Installation Requirements:
R001
Expiry date:
31/05/2030
Model:
D11.
Product Images

Manufacturer:
Shanghai RELI Water Technology Co., Ltd.
Company Name
Shanghai RELI Water Technology Co., Ltd.
Address
Building 10, No.275, Xipu Road, Songjiang District, Shanghai
Country
China

View All Listings by this Company

Print This Approval


#250515007

Range of ultrasonic water meters with brass bodies, plastic transducers and EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (M)x(M) (DN15), 1” BSP (M)x(M) (DN20), 1¼” BSP (M)x(M) (DN25), 1½” BSP (M)x(M) (DN32), 2” BSP (M)X(M) (DN40).
Marking:
Lianyungang Tengyue Electronic Technology Co., Ltd. registered trademark logos (either ‘TENGYUE METERING’ or ‘METERING’), model, size, Q3, IP, MAP and manufacturing month and year on meter face. DN and flow arrow on body.
Installation Requirements:
R001
Expiry date:
31/05/2030
Model:
TS14W.
Product Images

Approval Holder:
Lianyungang Tengyue Electronic Technology Co., Ltd.
Company Name
Lianyungang Tengyue Electronic Technology Co., Ltd.
Address
No.15 Xinlong Road, Haizhou Economic Development Zone, Lianyungang City
Country
China

View All Listings by this Company
Manufacturer:
Lianyungang Tengyue Electronic Technology Limited
Company Name
Lianyungang Tengyue Electronic Technology Limited
Address
No.15 Xinlong Road, Haizhou Economic Development Zone, Lianyungang City, Jiangsu Province
Country
China

View All Listings by this Company

Print This Approval


#2311377

‘WS’ range of water meters with brass bodies, incorporating plastic impellers. The inlets incorporate plastic filters. Maximum working pressure 16 Bar. Maximum operating temperature 50°C.

Section:
1505 Water Meters
Size:
½” BSP (M) inlet/outlet (DN15). ¾” BSP (M) inlet/outlet (DN20). 1” BSP (M) inlet/outlet (DN25). 1¼” BSP (M) inlet/outlet (DN32) 1½” BSP (M) inlet/outlet (DN40) 2” BSP (M) inlet/outlet (DN50)
Marking:
Apator & logo, address, model, size and technical information on dial face. Size and flow arrow on body.
Installation Requirements:
R001
Expiry date:
30/11/2028
Model:
WS range of Water Meters DN15, DN 20, DN 25, DN 32, DN 40 & DN 50
Product Images

Approval Holder:
Apator Powogaz S.A.
Company Name
Apator Powogaz S.A.
Address
Jaryszki 1c Jaryszki
Postcode
62-023 Żerniki
Country
Poland
Phone
+48 789 454 593
General Email
przemyslaw.gretka@apator.com

View All Listings by this Company

Print This Approval


#2309083

Range of water meters with plastic bodies. Maximum working pressure 16.0 bar.

Non-metallic materials and components comply with BS6920 at 60°C

Section:
1505 Water Meters
Size:
DN50, DN80 & DN100
Marking:
EUROMAG Advanced Metering Center and flow arrow on body. EUROMAG Advanced Metering Center , model and size on adhesive label on top casing.
Installation Requirements:
R001
Expiry date:
30/09/2028
Model:
MUT7000

Approval Holder:
Euromag International SrL
Company Name
Euromag International SrL
Address
Via Balla 55/57 Villafranca Padovana (PD)
Country
Italy
Phone
0039 049 9005064
General Email
euromag@euromag.com

View All Listings by this Company

Print This Approval


#240902089

Range of ‘SureCal’ immersion heater elements incorporating brass or DZR heads with either a copper, stainless steel, alloy or titanium heating element and a black EPDM ‘O’-ring. Open outlet use only. Maximum operating temperature 99°C

Section:
1530 Miscellaneous Fittings
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
RT – 1.1/4” BSP (M) to 2.1/4” BSP (M) RF – 48 mm OD
Marking:
'SureCal' logo, Model, Voltage, Size and other information on label.
Installation Requirements:
R001
Expiry date:
30/09/2029
Model:
Model Code: XXYZS Where XX denotes the boss type and can be replaced with any of the following: RT = Thread Type RF = Flange Type Where Y denotes the heating tube material and can be replaced with any of the following: 1 = Copper 2 = AISI 304 / AISI 304L 3 = AISI 321 4 = AISI 316 / AISI 316L 5 = Alloy 800 / Alloy 825 / Alloy 840 6 = Titanium 7 = AISI 309S 8 = AISI 310 Where Z denotes the brazing system and can be replaced with any of the following: A = Tin Alloy B = Silver Alloy C = Itek Brazing Where S denotes the surface enamelling and can be replaced with either of the following: S = Enamelled Blank = Not Enamelled

Approval Holder:
Thermowatt S.p.A.
Company Name
Thermowatt S.p.A.
Address
Via San Giovanni Battista 21 Arcevia
Postcode
60011
Country
Italy
Phone
+39 0731988246
General Email
thermowatt@legalmail.it

View All Listings by this Company

Print This Approval


#250504706

Range of multi-stage semiaxial submersible pumps with stainless steel bodies and impellers. Please note, this approval does not cover the motor, motor connection kit or power cable necessary for the pump to operate. Open outlet use only. Cold water use only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
250504706
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
140 SX models: 3” GAS FLANGED outlet conenection, 180 SX models: 5” GAS FLANGED outlet conenection, 230 SX models: 6” GAS FLANGED outlet conenection, 270 SX models: DN200 FLANGED outlet conenection.
Marking:
Panelli logo, model type, serial no., made in Italy, production date (MM/YY) and other techical info on data plate on body.
Installation Requirements:
R001 R415
Expiry date:
31/05/2030
Proviso:
Open outlet use only.
Model:
140 SX 34/XX, 140 SX 44/XX, 140 SX 54/XX, 140 SX 64/XX, 180 SX 102/ XX, 180 SX 124/XX, 180 SX 140/XX, 180 SX 78/XX, 180 SX 90/XX, 230 SX 200/XX (DRXX), 230 SX 220/XX (DRXX), 230 SX 240/XX (DRXX), 230 SX 280/XX (DRXX), 270 SX 370/XX (DRXX), 270 SX 440/XX (DRXX) (A). Where: 140-180-230-270 = pump diameter. 140: 6”, 180: 8”, 230: 10”, 270: 12”. SX: Semi-axial pump family. 34-440: Flow. /XX = Number of stages (XX will be replaced by 1 or 2 digits as follows). 140 SX 34: 3 to 27, 140 SX 44: 3 to 22, 140 SX 54: 3 to 22, 140 SX 64: 1 to 18, 180 SX 102: 1 to 15, 180 SX 124: 1 to 13, 180 SX 140: 1 to 12, 180 SX 78: 1 to 19, 180 SX 90: 1 to 17, 230 SX 200: 1 to 9, 230 SX 220: 1 to 7, 230 SX 240: 1 to 7, 230 SX 280: 1 to 7, 270 SX 370: 1 to 5, 270 SX 440: 1 to 5. Optional: DRXX = Impeller diameter reduction in mm. XX can either be 10 or 20. A = Impeller with corner reduction.

Approval Holder:
Panelli S.r.l.
Company Name
Panelli S.r.l.
Address
Via Rana 63/65 Z.I D5 Spinetta Marengo

View All Listings by this Company
Manufacturer:
Panelli S.r.l.
Company Name
Panelli S.r.l.
Address
Via Rana 63/65 Z.I D5 Spinetta Marengo

View All Listings by this Company

Print This Approval


#250508702

STORMBOOST range of domestic water pressure booster pumps with brass impellors, brass bodies with accumulators, available from 60 – 300 litres (please refer to model). Models are supplied with reducing bushes, pressure gauges, pressure reducing valves and double check valve assemblies housed in DZR brass bodies with isolation valves and strainers. Maximum working pressure 4.5 bar. Maximum operating temperature 23°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
250508702
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless-steel braided TPS lined flexible hose assemblies with 15mm push fit connections, for use with copper, PB and PEX pipe.
Marking:
Stuart Turner, model number and technical information on adhesive label on pump.
Installation Requirements:
R001 R009 R415
Expiry date:
31/05/2030
Model:
47714 STORMBOOST 60 with 60 litre accumulator, 47715 STORMBOOST 80 with 80 litre accumulator, 47716 STORMBOOST 100 with 100 litre accumulator, 47717 STORMBOOST 200 with 200 litre accumulator, 47718 STORMBOOST 300 with 300 litre accumulator.

Approval Holder:
Stuart Turner Ltd
Company Name
Stuart Turner Ltd
Address
47 Market Place Henley-on-Thames Oxfordshire
Postcode
RG9 2AD
Country
United Kingdom
Phone
01491 572655
General Email
stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Print This Approval


#250508701

Range of multistage pumps with stainless steel bodies and impellers. Maximum working pressure 10.0 bar. Cold Water Use Only.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
250508701
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models.
Marking:
OLIJU and product info on data plate.
Installation Requirements:
R001 R415
Expiry date:
31/05/2030
Model:
CHS 3 – 1” Female BSP, CHS 5 – 1” Female BSP, CHS 8 – 1 ¼” Female BSP, CHS 16 – 2” female BSP inlet X 1 ½ Female BSP outlet.

Approval Holder:
OLIJU - Júlio Nogueira Rodrigues
Company Name
OLIJU - Júlio Nogueira Rodrigues
Address
Rua da Mariana, 362 3885-466 Esmoriz Portugal
Country
Portugal
General Email
compras@oliju.com

View All Listings by this Company

Print This Approval


#250504022

Shower kit consisting of a plastic bodied shower handset (matt black), riser rail and PVC lined multi-layered shower hose with brass connections, EPDM 'O'-rings and strainer. Maximum operating temperature 60°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250504022
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½" BSP (F) conical or captive nut
Marking:
Methven on shower handset.
Installation Requirements:
R001 R040
Expiry date:
31/05/2030
Model:
KMKITBK, HANM09BK.

Approval Holder:
Methven UK Limited
Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

Print This Approval


#250508007

Range of shower handsets with plated plastic bodies (various finishes). The inlet incorporates a plastic strainer. Open outlet only. Maximum temperature of 60°C

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250508007
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP.
Marking:
Hansgrohe on body.
Installation Requirements:
R001 R040
Expiry date:
31/05/2030
Model:
28 562 XX0, 28 563 XX0, 28 585 XX0. Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#250503006

Riser rail kit including riser & rose. Fixed head made of stainless steel with a swivel connection Maximum working pressure 10.0 bar. Maximum operating temperature 75°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250503006
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½”
Marking:
Bristan on Rose
Installation Requirements:
R001 R040
Expiry date:
31/05/2030
Model:
KIT115 C

Approval Holder:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
Staffs
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

Print This Approval


#250312014

Range of shower handsets and overhead showers with plastic bodies incorporating EPDM ‘O’-rings and washers. The inlet of the overhead shower models can be supplied with either a washer or a combined washer and stainless-steel strainer. Maximum operating temperature 65°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250312014
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Open outlet use only.
Size:
Shower handsets: ½” BSP (M). Overhead showers: ½” BSP (F).
Marking:
Aqualisa on the handset body or overhead shower swivel joint.
Installation Requirements:
R001 R040
Expiry date:
31/03/2030
Proviso:
Open outlet use only.
Model:
Chrome Shower handset: ACY1012 Chrome Overhead showers: 704120 704121 704119
Product Images

Approval Holder:
Aqualisa Products Ltd.
Company Name
Aqualisa Products Ltd.
Address
Unit 6 The Flyers Way, Westerham, Kent
Postcode
TN6 1DE
Phone
07920 790367
General Email
tracey.jones@aqualisa.co.uk

View All Listings by this Company

Print This Approval


#250312013

A12231 & A12011 Ranges of shower handsets with plastic bodies (various finishes - see model) incorporating EPDM ‘O’-rings and washers. Maximum operating temperature 65°C.

Section:
1650 Shower Outlets
Section Subtitle:
Shower head(s) and/or shower handset(s).
WRAS Approval Number:
250312013
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Open outlet use only.
Size:
Shower handsets: ½” BSP (M). Overhead showers: ½” BSP (F).
Marking:
Bristan on body.
Installation Requirements:
R001 R040
Expiry date:
31/03/2030
Proviso:
Open outlet use only.
Model:
Shower handsets: A12231 C A12231 BLK A12231 BB A12231 GM A12011 C A12011 BLK A12011 BB A12011 GM

Approval Holder:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
Staffs
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

Print This Approval


#240402086

Range of ‘Y’-pattern strainers with blue epoxy coated ductile iron bodies and a stainless-steel screen. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1715 Strainers
Size:
DN50 - DN 300 flanged
Marking:
DVK, size & flow arrow on body
Installation Requirements:
R001
Expiry date:
30/04/2029
Model:
YSD Series

Approval Holder:
DVK International Co., Ltd
Company Name
DVK International Co., Ltd
Address
No. 118, Building 1, No 168 Jixin Road, Minhang District, Shanghai.
Postcode
201104
Country
China
General Email
dvkvalve@126.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 537 of 567

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.