Range of water meters with black nylon bodies. Maximum working pressure 16.0 Bar Maximum operating temperature 50.0°C

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Water meter inlet is classed as 1 1/2" BSP M but product is supplied with a raiser that has 1 1/2" BSP M outlets and 1 1/2" BSP F inlets.

Marking:

Contazara & model on housing and product info on meter face.

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

CZ4000 ½’’ CONCENTRIC PLASTIC WITH RAISER CZ4000 ¾’’ CONCENTRIC PLASTIC WITH RAISER

Approval Holder:

Contazara SA

Company Name

Contazara SA

Address

Ctra Castellon Km 5,5. 50720 Zargosa

Country

Spain

View All Listings by this Company

Range of water meters with brass and plastic bodies and plastic turbines. The inlet incorporates a plastic filter Maximum working pressure 16.0 Bar Maximum operating temperature 50.0°C

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” to 2 ½” BSP M (G models) DN 50 flanged (FL Models)

Marking:

Zenner logo, Model, ZR, CE, date of manufacture (YYYY) and other information on faceplate. Flow arrow and date of manufacture (YYYY) on body.

Installation Requirements:

R001 R008

Expiry date:

30/06/2030

Model:

MTKD 2,5-165-G ¾ B (½) MTKD 4-190-G 1 B (¾) MTKD 6,3-260-G 1 ¼ B (1) MTKD 10-260-G 1 ¼ B (1) MTKD 10-260-G 1 ½ B (5/4) MTKD 16-300-G 2 B (6/4) MTKD 25-270-G 2 ½ B (2) MTKD 25-300- G 2 ½ B (2) MTKD 25-270-FL MTKD 25-300-FL MTKD-L 2,5-165-G ¾ B (½) MTKD-L 4-190-G 1 B (¾)

Manufacturer:

Zenner International Gmbh & Co. KG

Company Name

Zenner International Gmbh & Co. KG

Address

Heinrich‐Barth‐Str. 29, 66115 Saarbrücken, Germany

Country

Germany

View All Listings by this Company

Range of SSM-AQUO ultrasonic water meters with brass bodies, the inlets incorporate a plastic filter. Maximum working pressure 16.0 bar. Maximum operating temperature 60°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

3/4” BSP (M) 7/8” BSP (M) 1” BSP (M) 1-1/4” BSP (M) 1-1/2” BSP (M) 2” BSP (M)

Marking:

Pietro Fiorentini logo moulded on cap. Pietro Fiorentini logo, pressure, flow, year of manufacture (YYYY) and other technical information printed on meter face. Flow arrow and DN moulded on body.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

SSM-AQUO DN15 - DN40

Approval Holder:

Pietro Fiorentini S.p.A.

Company Name

Pietro Fiorentini S.p.A.

Address

Via E. Fermi, n. 8/10-36057 Arcugnano (VI).

Country

Italy

General Email

mario.petti@fiorentini.com

View All Listings by this Company

Range of flow meters with plastic bodies. Maximum working pressure 8.0 bar Maximum operating temperature 40°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

3/8” BSP (F) x 3/8” BSP (M)

Marking:

BWT Logo on LCD display. Digmesa and flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

812486 (930-0074) Aquameter 3/8” with Relais. 812185 (938-A930/LE5117) Aquameter 3/8” with LCD Display. 812495 (938-A70/LE5113) Aquameter HF 3/8” with LCD Display.

Approval Holder:

BWT Holding GmbH

Company Name

BWT Holding GmbH

Address

Walter-Simmer-Straße 4 Mondsee

Postcode

5310

Country

Austria

Phone

+436648172152

General Email

andreas.stiegler@aidu.solutions

View All Listings by this Company

Range of angled valves with chromium plated brass bodies, incorporating a non-rising spindle headwork or a quarter turn ceramic disc headwork with either triangle, cubic, single lever or dome type operating members. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Valtech on body.

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

Non-rising spindle head with dome type operating members: AGV0112: ½” BSP (M) x ½” BSP (M), AGV0138: ½” BSP (M) x ⅜” BSP (M), AGV01A12: ½” BSP (M) x ½” BSP (M), AGV01A38: ½” BSP (M) x ⅜” BSP (M). ¼ turn ceramic disc headwork with dome type operating member: AGV4612: ½” BSP (F) x ½” BSP (M). ¼ turn ceramic disc headwork with single lever operating member: AGV2312: ½” BSP (M) x ½” BSP (M), AGV2312B: ½” BSP (M) x ½” BSP (M), AGV2338: ½” BSP (M) x ⅜” BSP (M). ¼ turn ceramic disc headwork with cubic operating member: AGV4812: ½” BSP (M) x ½” BSP (M), AGV4838: ½” BSP (M) x ⅜” BSP (M), AGV2512: ½” BSP (M) x ½” BSP (M), AGV2538: ½” BSP (M) x ⅜” BSP (M). ¼ turn ceramic disc headwork with triangle operating member: AGV05Q38: ½” BSP (M) x ⅜” BSP (M).

Approval Holder:

Ningbo Valtech Flow Control Co., Ltd

Company Name

Ningbo Valtech Flow Control Co., Ltd

Address

Room 610 New Oriental Times Building No. 1130 Biaizhang East Road Ningbo Zhejiang

Country

China

Phone

+86 0574 88001556

View All Listings by this Company

Manufacturer:

Ningbo Valtech Flow Control Co., Ltd

Company Name

Ningbo Valtech Flow Control Co., Ltd

Address

Export Processing Zone, Beilun Bonded South Zone, Ningbo City, Zhejiang Province (No. 6 Zhufeng Road)

View All Listings by this Company

’TP Series 300’ and ‘TPE Series 300’ ranges of single stage in-line pumps with black coloured cataphoretic electro deposition coated cast iron or ductile iron bodies and bronze, stainless-steel or black coloured cataphoretic electro deposition coated cast iron impellers. Pumps are available with BQQE or BBQE shaft seals. Maximum working pressure 16.0 bar. Maximum operating temperature 60°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250607701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN32 - DN350 Flanged connections.

Marking:

Grundfos and Grundfos logo on body. Grundfos and Grundfos logo, type, model, PN-SN no., technical info and manufacturing country on data plate on motor stool.

Installation Requirements:

R001 R415

Expiry date:

30/06/2030

Model:

TP series 300: TP(E) XX-XXX/X [Blank] or S or NC - X or BX - F - A or B or S or O or Y or Q - XXXX * Where: TP = pump type with normal Asynchronous motor. TPE = pump type with E-motor (motor with integrated frequency driver). XX = nominal diameter of inlet and outlet ports, DN (32-350). XXX = maximum head [dm] (60-1050). /X = pole number (2, 4, 6). [Blank] or S or NC = Sensor options: [Blank] = without sensor, S = TPE with factory-fitted differential-pressure sensor, NC = TPE with Siemens/Nidec motor with integrated CUE (Grundfos brand of VSD). X or BX = B: Oversize motor, X: Special version. F = DIN flange. A or B or S or O or Y or Q = A: Basic version - Cast iron pump housing and impeller, B: Cast iron pump housing with bronze impeller, S: Cast iron pump housing with stainless steel impeller, O: Ductile cast iron pump housing with cast iron impeller, Y: Ductile cast iron pump housing with bronze impeller, Q = Ductile cast iron pump housing with stainless steel impeller. XXXX = shaft seal: BQQE or BBQE. * = Motor information, does not have any bearing on water contact parts.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of shower handsets and overhead showers with plastic bodies incorporating EPDM ‘O’-rings and washers. The inlet of the overhead shower models can be supplied with either a washer or a combined washer and stainless-steel strainer. Maximum operating temperature 65°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250312014

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet use only.

Size:

Shower handsets: ½” BSP (M). Overhead showers: ½” BSP (F).

Marking:

Aqualisa on the handset body or overhead shower swivel joint.

Installation Requirements:

R001 R040

Expiry date:

31/03/2030

Proviso:

Open outlet use only.

Model:

Chrome Shower handset: ACY1012 Chrome Overhead showers: 704120 704121 704119

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company

Range of shower handsets and overhead showers with plastic bodies (various finishes - see model) incorporating EPDM ‘O’-rings and washers. The inlet of the overhead shower models can be supplied with either a washer or a combined washer and stainless-steel strainer. Maximum operating temperature 65°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250312003

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Open outlet only

Marking:

Jelong, WRAS on handset body or connection.

Installation Requirements:

R001 R040

Expiry date:

31/03/2030

Proviso:

Open outlet only

Model:

A12231* 3F hand shower A12232* 3F hand shower A12131* 3F hand shower A18311* 1F hand shower A12011* 1F hand shower A14431* 3F hand shower A14441* 4F hand shower A15241* 4F hand shower A15331* 3F hand shower B27811* 1F shower head B27012* 1F shower head B26111* 1F shower head B23111* 1F shower head B23011* 1F shower head B23251* 5F shower head For Hand shower * denotes: CH=CHROME PLATED BN=BRUSH NICKEL, GM=GUN METAL, G=GOLD, RG=ROSE GOLD For Shower head * denotes: CH=CHROME PLATED MB=MATT BLACK, W= WHITE, BN=BRUSH NICKEL, ORB=OIL RUBBED BRONZE， GM=GUN METAL, G=GOLD, RG=ROSE GOLD

Approval Holder:

Xiamen Jelong Plumbing Co.,Ltd

Company Name

Xiamen Jelong Plumbing Co.,Ltd

Address

Unit 402, No. 598 Guankou South Road Jimei District Xiamen

Country

China

View All Listings by this Company

Manufacturer:

Xiamen Jelong Plumbing Co.,Ltd

Company Name

Xiamen Jelong Plumbing Co.,Ltd

Address

Unit 402, No. 598 Guankou South Road Jimei District Xiamen

Country

China

View All Listings by this Company

Range of wall or ceiling mounted shower outlets with chromium plated bodies (or black body for 22123KF0) consisting of showers arms and shower head for installation with specific rough-in sets. Shower head bodies incorporate approved single check valve cartridges, however, the complete assemblies have not been tested to demonstrate it provides backflow protection. The 26.484 model rough-in set incorporates a plastic flow regulator on the inlet. Maximum working pressure: Open Outlet. Maximum operating temperature: 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250602028

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Any flow rates claimed by the manufacturer have not been verified

Size:

½” BSP (F).

Marking:

Showerheads: Grohe on face. Concealed bodies: Grohe, Date of manufacture (YYMMDD), Made in Germany on adhesive label inside plastic shell, Grohe, DR and Flow arrows on brass body.

Installation Requirements:

R001 R040

Expiry date:

30/06/2030

Model:

Grohe ‘RSH’ Cosmopolitan 310’ headshower sets 400mm: 26.475.xxx & 26.479.xxx. Grohe ‘RSH’ Smart Active 310’ headshower sets 400mm: 22123KF0 Concealed bodies (rough-in sets): 26.483 & 26.484 Where xxx denotes finish, can be replaced by: 000 – Chrome DC0 – Supersteel DA0 – Warm sunset AL0 – Brushed hard graphite A00 – hard graphit BE0 – polished nickel DL0 – brushed warm sunset EN0 – brushed nickel GN0 – brushed cool sunrise GL0 – cool sunrise LS0 – moon white A00 – hard graphite

Manufacturer:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Country

Germany

Phone

02372 930

View All Listings by this Company

Range of overhead shower outlets with stainless steel bodies (various finishes). The inlet incorporates a stainless-steel filter and a plastic flow regulator. Maximum working temperature 45°C. Open outlet use only.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250608015

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F).

Marking:

Dolphin Solutions Ltd logo on the body.

Installation Requirements:

R001 R040

Expiry date:

30/06/2030

Model:

DB3001.a.bbb Dolphin blue round shower head DB3002.a.bbb Dolphin blue square shower head Where: The suffix .a in the above codes will be a number 1 - 9 to denote the finish: .1 to denote brushed/satin polished. .2 to denote mirror polished. .3 to denote brushed/satin polished with PVD coating. .4 to denote mirror polished with PVD coating. .5 to denote powder coated. .6 - 9 to denote other material and finish options. The suffix .bbb in the above code indicates the colour of the PVD or powder coat. It can be either two or three digits from 01-999.

Approval Holder:

Dolphin Solutions Limited

Company Name

Dolphin Solutions Limited

Address

Southpoint Compass Park Bodiam East Sussex

Postcode

TN32 5BS

Country

United Kingdom

View All Listings by this Company