Directory Search Results

Print List

#2209547

'EPOGUARD APC 301'. Factory applied, two-component, red coloured epoxy coating. Mix parts A & B in a 3:1 volume ratio and apply as per manufacturer's Technical Data Sheet, 'rev.01', dated April 2022. Cure for 7 days@28°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5030 Coatings, Paints & Linings
Section Subtitle:
Factory applied pipe & fittings coatings.
WRAS Approval Number:
2209547
Expiry date:
30/09/2027

Approval Holder:
Atul Limited
Company Name
Atul Limited
Address
Atul - 396 020, Gujarat
Country
India

View All Listings by this Company

Print This Approval


#2210532

'ECO-Coat FBE Black Powder PFC/5010'. Factory applied, black coloured epoxy coating. Apply as per manufacturer's IFU 'Doc/PFC/710', revision 1, for 3 minutes at a metal temperature of @220°C. For use with water up to 85°C. This material is only approved for the application conditions that appear on the approval. If the application conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5030 Coatings, Paints & Linings
Section Subtitle:
Factory applied pipe & fittings coatings.
WRAS Approval Number:
2210532
Expiry date:
31/10/2027

Approval Holder:
Par Ferro Coatings Pvt. Ltd.
Company Name
Par Ferro Coatings Pvt. Ltd.
Address
129, Matheswartala Road, Kolkata - 700046, West Bengal
Country
India

View All Listings by this Company

Print This Approval


#2209553

'PROTECSOB BEC3'. Factory applied, mustard coloured (once mixed), two-component epoxy coating. Mix parts A & B in a 3:1 volume ratio and apply as per manufacturer's TDS reference '28712'. Cure for 15 hours@70°C. For use with water up to 70°C. From December 2023 the coating is for use with water up to 85°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5030 Coatings, Paints & Linings
Section Subtitle:
Factory applied pipe & fittings coatings.
WRAS Approval Number:
2209553
Expiry date:
30/09/2027

Approval Holder:
SOB Solutions
Company Name
SOB Solutions
Address
ZI – Rue Ambroise Croizat, 46130 BIARS-sur-CERE
Country
France

View All Listings by this Company

Print This Approval


#2202569

'Monolevel 844SP'. Site applied, grey coloured, polymer modified cementitious mortar. Mix mortar with water in a weight ratio of 5:0.6. Apply as per manufacturer's instructions 'Bulletin No. ML844SP/031/010' issued July 2020. Cure for 21 days@7°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5038 Coatings, Paints & Linings
Section Subtitle:
Site applied concrete coatings. Compliance with BS6920 relates to the conditions of cure specified in the listing. If the cure conditions are varied from those described below then compliance with BS6920 cannot be assummed without further testing. Where catalysts are required, only tested catalysts in the recommended concentrations should be used. Manufacturer's advice must be sought if any non standard mixing or curing conditions are being considered.
WRAS Approval Number:
2202569
Expiry date:
28/02/2027

Approval Holder:
Flexcrete Technologies Ltd.
Company Name
Flexcrete Technologies Ltd.
Address
Tomlinson Road, Leyland, Lancashire
Postcode
PR25 2DY
Phone
0845 2607005
General Email
Info@flexcrete.com

View All Listings by this Company

Print This Approval


#2102551

'DiChem Tiestop'. Site applied, grey coloured cementitious repair mortar. Mix 'DiChem Tiestop' and water in a mass ratio of 9.4:1 and apply as per manufacturer's instructions 'Rev 4, 02.22'. Cure for 21 days@7°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:
5063 Concrete, Cement and Mortar
Section Subtitle:
Repair materials. High humidity of 80% to 95% is required when curing cementitious materials.
WRAS Approval Number:
2102551
Expiry date:
28/02/2026

Approval Holder:
Direct Chemicals Ltd.
Company Name
Direct Chemicals Ltd.
Address
Unit 6, Stokes Farm, Binfield Road, Wokingham
Postcode
RG40 5PR
Country
Berkshire
Phone
0118 989 2666
General Email
sales@dichem.co.uk

View All Listings by this Company

Print This Approval


#2210517

'Teadit NA1006'. Green coloured NBR/fibre gasket material manufactured by mixing and calendaring. For use with water up to 65°C.

Section:
5075 Fibre
Section Subtitle:
These materials are for use only as a jointing/gasket material having been tested at reduced surface area to volume ratio.
WRAS Approval Number:
2210517
Expiry date:
31/10/2027

Approval Holder:
Teadit International Produktions GmbH
Company Name
Teadit International Produktions GmbH
Address
Europastrasse 12, 6322 Kirchbichl
Country
Austria

View All Listings by this Company

Print This Approval


#2302509

‘ECOCLEAR White Gray 9098’. Off-white/grey coloured, hot pressed GRP single layered panel. For use with water up to 55°C.

Section:
5120 Glass Reinforced Plastics (GRP)
Section Subtitle:
Components.
WRAS Approval Number:
2302509
Expiry date:
29/02/2028

Approval Holder:
ECOCLEAR Co. Ltd.
Company Name
ECOCLEAR Co. Ltd.
Address
53-1 1288 Beon-gil, Gimhaedae-Ro Hallim-Myeon Gimhae-si, Gyeongsangnam-do, 50581
Country
Korea, Republic of

View All Listings by this Company

Print This Approval


#2006535

'TUB03 PVC Inner Hose (black coloured) & TUB04 PVC Inner Hose (white coloured)'. Single layered, extruded PVC hoses. For use with water up to 65°C.

Section:
5140 Hoses & Tubing
Expiry date:
30/06/2025

Approval Holder:
Industrial Disflex Iberica, SL
Company Name
Industrial Disflex Iberica, SL
Address
Carrer Comerç, 4, Pol. Ind. Comte de Sert, 08755 – Castellbisbal, Barcelona
Country
Spain

View All Listings by this Company

Print This Approval


#2208599

'Everbuild Plumber's P12 Silicone Grease (Barcode: 5055492703842)'. White coloured silicone grease. Apply as per manufacturer’s instructions. For use with water up to 65°C.

Section:
5160 Lubricants
Expiry date:
31/08/2027

Approval Holder:
Everbuild Building Products Ltd- a Sika Company
Company Name
Everbuild Building Products Ltd- a Sika Company
Address
Site 41 Knowsthorpe Way, Cross Green Industrial Estate, Leeds
Postcode
LS9 0SW
Country
United Kingdom
Phone
0113 240 3456

View All Listings by this Company

Print This Approval


#2211516

'Sanglier SIlicone Spray (1-1)'. Clear (colourless) silicone spray lubricant. Apply as per manufacturer's TDS 'issue 1' dated 28/01/2022. For use with water up to 85°C.

Section:
5160 Lubricants
Expiry date:
30/11/2027

Approval Holder:
Sanglier Ltd
Company Name
Sanglier Ltd
Address
Shelley Close Lowmoor Business Park Kirkby-in-Ashfield
Postcode
NG17 7JZ
Country
Notts
Phone
+44 (0) 1623 722 661
General Email
sales@sanglierltd.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 477 of 1132

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.