Directory Search Results

Print List

#241002025

Range of elastomeric shower hoses with EPDM lining and ‘O’-rings. The product incorporates a flow restrictor. Maximum operating temperature 60.0°C Open outlet use only

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
241002025
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1/2" BSP (F)
Marking:
Hansgrohe logo on flow control (models 28 249 xx0 & 28 248 xx0 AXOR logo on flow control (all other models)
Installation Requirements:
R001
Expiry date:
31/10/2029
Model:
AXOR 28 127 xx0 28 128 xx0 30 246 018 Hansgrohe 28 249 xx0 28 248 xx0 Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240904718

Range of Compress 5800i AW vertical cased and insulated indirect unvented stainless steel hot water storage cylinders fitted with a Caleffi 309508 CST temperature and pressure relief valve set at 10 bar & 90°C, and supplied with a Caleffi inlet control group consisting of in-line pressure reducing valve (set at 3.5 bar) and pressure relief valve (set at 6 bar) and incorporates an approved check valve cartridge (verified by test suitable for backflow protection against Fluid Category 2). The cyclinders also supplied with an 18L expansion vessel and Intatec filling loop assembley (FL12041510). Maximum working pressure 10 bar. Maximum operating temperature 80°C.

Section:
1890 Unvented Heating Apparatus
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
22mm compression.
Marking:
Bosch, Model, Serial No, Pressure ratings, Capacity and other technical information on adhesive label on control box.
Installation Requirements:
R001 R140 R360
Expiry date:
30/09/2029
Model:
7 731 600 271 CS5800iAW 180 MCP (Slimline) 7 731 600 272 CS5800iAW 210 MP 7 731 600 273 CS5800iAW 250 MP
Product Images

Approval Holder:
Worcester Bosch
Company Name
Worcester Bosch
Address
Cotswold Way Warndon Worcester
Postcode
WR4 9SW
Country
United Kingdom
Phone
+44 1905 752761
General Email
ian.sharp@uk.bosch.com

View All Listings by this Company
Manufacturer:
Worcester Bosch
Company Name
Worcester Bosch
Address
Cotswold Way Warndon Worcester
Postcode
WR4 9SW
Country
United Kingdom
Phone
+44 1905 752761
General Email
ian.sharp@uk.bosch.com

View All Listings by this Company

Print This Approval


#241204706

Range of air venting valves with blue epoxy coated ductile iron bodies and a plastic float. Maximum working pressure16.0 bar. Cold water use only.

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
241204706
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
DN50, DN80, DN100, DN150, DN200, DN250
Marking:
Bermad, size, model, PN, serial number on body.
Installation Requirements:
R001 R535
Expiry date:
30/09/2029
Model:
C70-2" C70-3" C70-4" C70-6" C70-8" C70-10"

Approval Holder:
Bermad CS Ltd
Company Name
Bermad CS Ltd
Address
Kibbutz Evron 2280800, Israel

View All Listings by this Company
Manufacturer:
Bermad CS Ltd
Company Name
Bermad CS Ltd
Address
Kibbutz Evron 2280800, Israel

View All Listings by this Company

Print This Approval


#240904029

Range of concealed, wall mounted thermostatic blending valves with brass bodies (chromium plated trim sets). The products consist of a two-way diverter and a thermostatic cartridge controlling the temperature. All models incorporate approved check valve cartridges, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
240904029
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models.
Marking:
Gessi backplate
Installation Requirements:
R001 R010 R040
Expiry date:
30/09/2029
Model:
65222+63011 linear Venti20 2 ways (3/4” BSP F), 63012+63011 linear classic 2 ways (3/4” BSP F), 65224+63013 linear Venti20 3 ways (3/4” BSP F), 63014+63013 linear classico 3 ways (3/4” BSP F), 65226+63015 linear Venti20 4 ways (3/4” BSP F), 63016+63015 linear classic 4 ways (3/4” BSP F), 65232+63001 compact Venti20 2 ways (1/2” BSP F), 65234+63001 compact Venti20 3 ways(1/2” BSP F), 63006+63001 compact classic 3 ways (1/2” BSP F), 65242+63055 mixer Venti20 2 ways(1/2” BSP F), 63079+63055 mixer classic 2 ways(1/2” BSP F), 65244+63055 mixer Venti20 3 ways (1/2” BSP F), 63081+63055 mixer classic 3 ways (1/2” BSP F).
Product Images

Approval Holder:
Gessi S.p.A.
Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company

Print This Approval


#240904031

Range of T-type thermostatic blending valves with DZR brass bodies. Maximum working pressure 14.0 bar. Maximum operating temperature 90°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
240904031
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Please refer to model.
Marking:
Caleffi logo & CR on body. Caleffi and product info on cap.
Installation Requirements:
R001 R010 R040
Expiry date:
30/09/2029
Model:
523150 (DN20): ¾” BSP(M). 523160 (DN25): 1” BSP (M). 523170 (DN32): 1¼” BSP (M). 523180 (DN40): 1 ½” BSP (M). 523190 (DN50): 2” BSP(M).
Product Images

Approval Holder:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company

Print This Approval


#240904032

Range of T-type thermostatic mixing valves with DZR brass bodies. Maximum working pressure 14.0 bar. Maximum operating temperature 100°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
240904032
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (M) - 2” BSP (M).
Marking:
Caleffi and product info on cap. Caleffi Solar and CR on body.
Installation Requirements:
R001 R010 R040
Expiry date:
30/09/2029
Model:
252151: DN20 – ¾” BSP (M). 252160: DN25 – 1” BSP (M). 252170: DN32 - 1¼” BSP (M). 252180: DN40 – 1½” BSP (M). 252190: DN50 – 2” BSP (M).
Product Images

Approval Holder:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company

Print This Approval


#240988015

Range of wall mounted bar type thermostatic shower valves (brass bodies – various finishes) incorporating ceramic disc headwork which controls the flow to 2 outlets with dome type operating members. Temperature is controlled independently via a thermostatic cartridge with dome type operating member which incorporates a manual override button. Both inlets incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Supplied with an optional flow regulator. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
240988015
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Not supplied with shower hose, shower handset or overhead shower outlet.
Size:
½”x ¾” BSP (M) offset unions or 15mm compression
Marking:
PPI on body
Installation Requirements:
R001 R010 R040
Expiry date:
30/09/2029
Model:
801525 X XXX 801524 X XXX X XXX Denotes the following: First X: Different handle and the second, third & fourth XXX for different finishes: Handles: A (Dome type) Chrome – No suffix, Brushed brass – BGP, PVD Gold – PVD, Brushed Nickel – BN1, Gun Metal – GMG, Matt Black – MBK, Matt White – MWH, Stainless Steel – SS1, Black Chrome – BCP, Titanium – TIB and Antique Bronze – AB1. This valve is supplied with Fast Fit connections or S Shape fixing kit. This valve will be supplied with an optional Flow Regulator.
Product Images

Approval Holder:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company
Manufacturer:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company

Print This Approval


#240888002

Range of wall mounted, thermostatic bar shower mixers (brass bodies – various finishes), incorporating a quarter turn ceramic disc headwork that controls the flow with a dome type operating member. Temperature is controlled independently via a thermostatic cartridge with dome type operating member that incorporates a manual override button. Models 483841 incorporate a half turn ceramic disc headwork that diverts the flow to an overhead shower or shower handset. Both inlets incorporate an approved check valve cartridge and stainless steel strainers however, the complete product has not been fully tested to demonstrate it provides backflow protection. Models 248683 & 287697 Maximum working pressure 10 bar. Maximum operating temperature 65 C. Model 483841 Maximum working pressure 5 bar. Maximum operating temperature 60 C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
240888002
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Models 483841 are supplied with an overhead shower, shower hose & handset. Models 248683 & 287697 are supplied with a shower hose and handset.
Size:
½”x ¾” BSP (M) offset unions 15mm compression
Marking:
248683 CPS on body 287697 iflo on body 483841 iflo on body
Installation Requirements:
R001 R010 R040
Expiry date:
31/08/2029
Model:
248683 Thermo bar mixer cool touch and single mode kit 287697 iflo woodcote thermostatic shower 483841 iflo Ashby Thermostatic Bar Mixer Shower

Approval Holder:
The Highbourne Group, City Plumbing Supplies
Company Name
The Highbourne Group, City Plumbing Supplies
Address
Branch Support Centre Highbourne House Highbourne House Crick Northampton
Postcode
NN6 7SL
Country
United Kingdom
Phone
07342 078865
General Email
Lindsey.cocks-stevens@cityplumbing.co.uk

View All Listings by this Company

Print This Approval


#2310167

Range of T-type thermostatic mixing valves with brushed chrome plated DZR brass bodies. Each inlet incorporates a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2) and stainless-steel strainers. Compression connections are for use with copper pipe (manufactured to BS EN1057). Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 85°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2310167
Size:
See model.
Marking:
Sanbra Fyffe, Model & technical information on operating member. CR and flow arrow on body.
Installation Requirements:
R001
Expiry date:
31/10/2028
Model:
770972 (14.7MM COMPRESSION), 770973 (21MM COMPRESSION), 770970 (15MM COMPRESSION), 770971 (22MM COMPRESSION), THERMOSTATIC BLENDING VALVES

Approval Holder:
Sanbra Fyffe
Company Name
Sanbra Fyffe
Address
Santry Avenue, Santry, Dublin, D09 K160
Country
Ireland

View All Listings by this Company

Print This Approval


#241002006

Range of wall mounted, thermostatic shower valves with brass bodies (various finishes) incorporating ceramic disc headwork with dome type operating members which controls and diverts the flow between the two shower outlets. The temperature is controlled independently via a thermostatic cartridge with dome type operating member that incorporates a manual override button. The inlet to the overhead shower incorporates a plastic flow regulator. The inlets to the valve body and the outlet to the shower handset incorporate an approved single check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with an overhead shower outlet, riser rail, shower hose and handset Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
241002006
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
3/4" BSP (M) X 1/2" BSP offset union (M).
Marking:
Hansgrohe on body, shower pole and head
Installation Requirements:
R001 R030
Expiry date:
31/10/2029
Model:
24 222 xx0 Hansgrohe Pulsify S Puro Showerpipe 260 1jet with thermostat. 24 223 xx0 Hansgrohe Pulsify S Puro Showerpipe 260 1jet EcoSmart with thermostat. 24 236 xx0 Hansgrohe Pulsify S Puro Showerpipe 260 1jet with thermostat and hand shower 3jet. 24 237 xx0 Hansgrohe Pulsify S Puro Showerpipe 260 1jet EcoSmart with thermostat and hand shower 3jet. Models added April 2025: 28 078 xx0 & 28083 xx0. Model added September 2025: 28 076 xx0. Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 468 of 626

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.