Range of spout outlets, (brass bodies – various finishes) incorporating a plastic aerator, flow straightener or an open outlet type spout outlet (see models). Maximum operating temperature 65.0°C

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

240402004

Note:

Open outlet use only.

Size:

1/2" BSP (M)

Marking:

Lefroy Brooks logo on underside of spout

Installation Requirements:

R001 R006 R010

Expiry date:

30/04/2029

Model:

PSH023 YY (Aerator) PSH087 YY (Open Outlet Type Spout) PSH002 YY (Flow Straightener) PSH086 YY (Aerator) First group of six letters and numbers – This is the product identification code. This remains constant. Last letters (e.g. YY) – These are replaced with letters representing the colour/plating options available. The number of letters will depend on the finish. Available surface finishes are, but not limited to: - CP - Polished Chrome - NK - Polished Nickel - BC - Brushed Chrome - BN - Brushed Nickel - PB - Polished Brass - BPB - Brushed Brass - AB - Aged Brass - TA - Taunton - AG - Antique Gold - HRG - Hard Rubbed Gold - CM - Champagne Gold - BCM - Brushed Champagne Gold - CO - Copper - MBC - Matt Black Chrome

Approval Holder:

Lefroy Brooks

Company Name

Lefroy Brooks

Address

Unit 3 Marston Industrial Estate Marston Road Wolverhampton

Postcode

WV2 4LX

Country

United Kingdom

Phone

01902 390 891

General Email

rob@lefroybrooks.co.uk

View All Listings by this Company

Range of single hole, single outlet (fixed) combination tap assemblies (various finishes - see model). Electronic controls on the left-hand side of the body allow the tap to dispense one or more of the following (model specification dependent): ambient, near boiling, chilled or sparkling water. The spout incorporates a plastic aerator on the Sparkling/Ambient/Chilled outlet, and a separate outlet for the near boiling water. All models incorporate a vent outlet within the tap spout for the near-boiling water circuit. Near-boiling circuit has a maximum operating temperature of 98°C. All other circuits have a maximum operating temperature of 65°C.

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

240102707

Note:

Open outlet use only. These taps are designed to only work with the Zip HydroTap Command Centres, (sold separately). R008 applies to the pushfit fittings and blue LLDPE tubing.

Size:

Sparkling/Ambient/Chilled inlet (model dependent): LLDPE pipe ¼”. Near boiling inlet: Silicone flexible pipe ID 7.7mm.

Marking:

Zip on operating member

Installation Requirements:

R001 R006 R008 R009 R160

Expiry date:

31/01/2029

Model:

95453xxx Arc Plus. 95454xxx Cube Plus. Where xxx denotes finish and can be replaced with: Z00 = CH Chrome, Z01 = BR Brushed Chrome, Z03 = FB Matt Black, Z05 = BRG Brushed Rose Gold, Z07 = BDG Brushed Gold, Z09 = BPT Gunmetal, Z11 = BNI Brushed Nickel. Each tap can be specified to dispense the following options: Near boiling and ambient. Near boiling, chilled and sparkling, Near boiling and chilled, Near boiling, Chilled and sparkling, Sparkling.

Product Images

Approval Holder:

Zip Heaters UK Ltd T/A Zip Water UK

Company Name

Zip Heaters UK Ltd T/A Zip Water UK

Address

Trafalgar House, Trafalgar Business Park, Dereham

Postcode

NR19 1JG

Country

United Kingdom

Phone

0345 600 5005

General Email

sebastian.ducker@zipwater.co.uk

View All Listings by this Company

Range of expansion vessels with stainless steel bodies and EPDM membranes. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:

1000 Expansion Vessels

Size:

See models.

Marking:

Varem, model, maximum temperature & maximum pressure on adhesive label on body.

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

US050 - Maxivarem LS Pressure tanks for water pump systems 50L vert. 1” BSP (M). US060 - Maxivarem LS Pressure tanks for water pump systems 60L vert. 1” BSP (M). US080 - Maxivarem LS Pressure tanks for water pump systems 80L vert. 1” BSP (M). US100 - Maxivarem LS Pressure tanks for water pump systems 100L vert. 1” BSP (M). US150 - Maxivarem LS Pressure tanks for water pump systems 150L vert. 1”1/2 BSP (M). US200 - Maxivarem LS Pressure tanks for water pump systems 200L vert. 1”1/2 BSP (M). US300 - Maxivarem LS Pressure tanks for water pump systems 300L vert. 1”1/2 BSP (M). US500 - Maxivarem LS Pressure tanks for water pump systems 500L vert. 1”1/2 BSP (M). US051 - Maxivarem LS Pressure tanks for water pump systems 50L hor. 1” BSP (M). US061 - Maxivarem LS Pressure tanks for water pump systems 60L hor. 1” BSP (M). US081 - Maxivarem LS Pressure tanks for water pump systems 80L hor. 1” BSP (M). US101 - Maxivarem LS Pressure tanks for water pump systems 100L hor. 1” BSP (M). US151 - Maxivarem LS Pressure tanks for water pump systems 150L hor. 1”1/2 BSP (M). US201 - Maxivarem LS Pressure tanks for water pump systems 200L hor. 1”1/2 BSP (M). US301 - Maxivarem LS Pressure tanks for water pump systems 300L hor. 1”1/2 BSP (M).

Product Images

Approval Holder:

Varem S.p.a

Company Name

Varem S.p.a

Address

Via Sabbioni, 2, 35024 Bovolenta (PD)

Country

Italy

View All Listings by this Company

Manufacturer:

Varem S.p.a

Company Name

Varem S.p.a

Address

Via Sabbioni, 2, 35024 Bovolenta (PD)

Country

Italy

View All Listings by this Company

Range of vertical and horizontal expansion vessels with EPDM membrane and stainless steel or galvanised steel connections. Maximum working pressures 10.0. Maximum operating temperature 85 °C.

Section:

1000 Expansion Vessels

Size:

¾” BSP (M) or 1” BSP (M).

Marking:

VAREM, year of production, model and further product information on adhesive label.

Installation Requirements:

R001 R535

Expiry date:

31/12/2028

Model:

Vertical models: S2005; S2008; S2012; S2019; S2020; E1024; S2025; S2040. Horizontal models: S2H19; S2H20.

Approval Holder:

Varem S.p.a

Company Name

Varem S.p.a

Address

Via Sabbioni, 2, 35024 Bovolenta (PD)

Country

Italy

View All Listings by this Company

Manufacturer:

Varem S.p.a

Company Name

Varem S.p.a

Address

Via Sabbioni, 2, 35024 Bovolenta (PD)

Country

Italy

View All Listings by this Company

Range of filling loop assemblies, incorporating a stainless steel braided EPDM lined flexible hose, brass bodied isolation valve and a DZR brass non-verifiable double check valve assembly that incorporates an isolation valve. Model FL12041510 has a lanyard and end caps. Maximum working pressure 10 bar. Maximum operating temperature 85°C

Section:

1015 Filling Loop

WRAS Approval Number:

240204702

Note:

To be used with copper pipe only to BS EN 1057

Size:

15mm Compression

Marking:

Intatec logo, flow arrow & CR on double check valve. Intatec logo, WRAS & year of manufacture (yyyy) on crimp connector

Installation Requirements:

R001

Expiry date:

28/02/2029

Model:

FL12041510 FL12041500 111341 111342 135202 120416.1 00107125

Approval Holder:

Intatec Limited

Company Name

Intatec Limited

Address

Airfield Industrial Estate Hixon Staffordshire

Postcode

ST18 0PF

Country

United Kingdom

Phone

01889272180

General Email

ryan.tilsley@intatec.co.uk

View All Listings by this Company

Carbon block filter cartridge with plastic body. Maximum working pressure 8.2 bar. Cold water use.

Section:

1055 Filter Cartridges

Size:

32.94mm ØD

Marking:

Lincat, model and technical information on adhesive label on body.

Installation Requirements:

R001 R008 R120 R150 R170 R290

Expiry date:

31/12/2028

Model:

FC04 Filter Cartridge Model added April 2024: FH04 Filter Head

Approval Holder:

Lincat Ltd

Company Name

Lincat Ltd

Address

Whisby Road Lincoln Lincolnshire

Postcode

LN6 3QZ

Phone

+44 (0) 1522 875500

General Email

sales@lincat.co.uk

View All Listings by this Company

Filter cartridge with plastic body. Maximum working pressure 8.0 bar. Cold water use only.

Section:

1055 Filter Cartridges

Size:

74mm OD 3.5 ISO Grohe thread.

Marking:

BWT, Grohe and flow arrow on body

Installation Requirements:

R001 R008 R120 R150 R170 R290

Expiry date:

31/01/2029

Model:

40691002 Grohe Blue Magnesium+Zinc

Product Images

Approval Holder:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Country

Germany

Phone

02372 930

General Email

marc.engelhardt@lixil.com

View All Listings by this Company

Geberit range of ‘FlowFit’ press Fittings for use with ‘Geberit FlowFit Pipe ML’ and ‘Geberit FlowFit Pipe coils ML’ (insulated and uninsulated) PERT/Al/PERT pipes. The fittings are made from PPSU or lead free silicon bronze. Operating parameters: 16.0 bar@cold water and 10.0 bar@70°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2312363

Size:

16mm – 75mm.

Marking:

Geberit & size on fittings. Geberit, size, model & material on pipes.

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

Geberit FlowFit Fittings for use with Geberit FlowFit Pipe ML and Geberit FlowFit Pipe coils ML (insulated and uninsulated) Fittings included on the approval: FlowFit coupling 620.010.00.1 PPSU, d=16mm 620.011.00.1 PPSU, d=20mm 620.012.00.1 PPSU, d=25mm 620.013.00.1 PPSU, d=32mm 620.014.00.1 PPSU, d=40mm 620.015.00.1 PPSU, d=50mm 620.016.00.1 PPSU, d=63mm 620.017.00.1 PPSU, d=75mm FlowFit long coupling 620.020.00.1 CuZn21Si3P, d=16mm 620.021.00.1 CuZn21Si3P, d=20mm 620.022.00.1 CuZn21Si3P, d=25mm 620.023.00.1 CuZn21Si3P, d=32mm 620.024.00.1 CuZn21Si3P, d=40mm 620.025.00.1 CuZn21Si3P, d=50mm FlowFit reducer 620.031.00.1 PPSU, d=20mm, d1=16mm 620.032.00.1 PPSU, d=25mm, d1=16mm 620.042.00.1 PPSU, d=25mm, d1=20mm 620.033.00.1 PPSU, d=32mm, d1=20mm 620.043.00.1 PPSU, d=32mm, d1=25mm 620.034.00.1 PPSU, d=40mm, d1=20mm 620.044.00.1 PPSU, d=40mm, d1=25mm 620.054.00.1 PPSU, d=40mm, d1=32mm 620.035.00.1 PPSU, d=50mm, d1=32mm 620.045.00.1 PPSU, d=50mm, d1=40mm 620.036.00.1 PPSU, d=63mm, d1=40mm 620.046.00.1 PPSU, d=63mm, d1=50mm 620.037.00.1 PPSU, d=75mm, d1=40mm 620.047.00.1 PPSU, d=75mm, d1=50mm 620.057.00.1 PPSU, d=75mm, d1=63mm FlowFit bend 620.062.00.1 45°, PPSU, d=25mm 620.063.00.1 45°, PPSU, d=32mm 620.064.00.1 45°, PPSU, d=40mm 620.065.00.1 45°, PPSU, d=50mm 620.066.00.1 45°, PPSU, d=63mm 620.067.00.1 45°, PPSU, d=75mm 620.070.00.1 90°, PPSU, d=16mm 620.071.00.1 90°, PPSU, d=20mm 620.072.00.1 90°, PPSU, d=25mm 620.073.00.1 90°, PPSU, d=32mm 620.074.00.1 90°, PPSU, d=40mm 620.075.00.1 90°, PPSU, d=50mm 620.076.00.1 90°, PPSU, d=63mm 620.077.00.1 90°, PPSU, d=75mm FlowFit T-piece, equal 620.080.00.1 PPSU, d=16mm 620.081.00.1 PPSU, d=20mm 620.082.00.1 PPSU, d=25mm 620.083.00.1 PPSU, d=32mm 620.084.00.1 PPSU, d=40mm 620.085.00.1 PPSU, d=50mm 620.086.00.1 PPSU, d=63mm 620.087.00.1 PPSU, d=75mm FlowFit T-piece, reduced 620.111.00.1 PPSU, d=20mm, d1=16mm, d2=20mm 620.101.00.1 PPSU, d=20mm, d1=16mm, d2=16mm 620.121.00.1 PPSU, d=16mm, d1=20mm, d2=16mm 620.102.00.1 PPSU, d=25mm, d1=20mm, d2=20mm 620.131.00.1 PPSU, d=20mm, d1=20mm, d2=16mm 620.103.00.1 PPSU, d=32mm, d1=25mm, d2=25mm 620.104.00.1 PPSU, d=40mm, d1=20mm, d2=40mm 620.105.00.1 PPSU, d=50mm, d1=40mm, d2=40mm 620.106.00.1 PPSU, d=63mm, d1=25mm, d2=63mm 620.107.00.1 PPSU, d=75mm, d1=25mm, d2=75mm 620.112.00.1 PPSU, d=25mm, d1=16mm, d2=25mm 620.113.00.1 PPSU, d=32mm, d1=16mm, d2=32mm 620.114.00.1 PPSU, d=40mm, d1=25mm, d2=40mm 620.115.00.1 PPSU, d=50mm, d1=25mm, d2=50mm 620.116.00.1 PPSU, d=63mm, d1=32mm, d2=63mm 620.117.00.1 PPSU, d=75mm, d1=32mm, d2=75mm 620.122.00.1 PPSU, d=25mm, d1=20mm, d2=25mm 620.123.00.1 PPSU, d=32mm, d1=20mm, d2=25mm 620.124.00.1 PPSU, d=40mm, d1=32mm, d2=40mm 620.125.00.1 PPSU, d=50mm, d1=32mm, d2=50mm 620.126.00.1 PPSU, d=63mm, d1=40mm, d2=63mm 620.127.00.1 PPSU, d=75mm, d1=40mm, d2=75mm 620.132.00.1 PPSU, d=20mm, d1=25mm, d2=20mm 620.133.00.1 PPSU, d=32mm, d1=20mm, d2=32mm 620.135.00.1 PPSU, d=50mm, d1=40mm, d2=50mm 620.136.00.1 PPSU, d=63mm, d1=50mm, d2=63mm 620.137.00.1 PPSU, d=75mm, d1=50mm, d2=75mm 620.142.00.1 PPSU, d=25mm, d1=25mm, d2=20mm 620.143.00.1 PPSU, d=32mm, d1=25mm, d2=32mm 620.147.00.1 PPSU, d=75mm, d1=63mm, d2=75mm FlowFit T-piece with female thread 620.150.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", d1=16mm 620.151.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=20mm 620.157.00.1 CuSn4Zn2PS, d=25mm, Rp=1/2", d1=20mm 620.152.00.1 CuSn4Zn2PS, d=25mm, Rp=1/2", d1=25mm 620.162.00.1 CuSn4Zn2PS, d=25mm, Rp=3/4", d1=25mm 620.153.00.1 CuSn4Zn2PS, d=32mm, Rp=1/2", d1=32mm 620.163.00.1 CuSn4Zn2PS, d=32mm, Rp=3/4", d1=32mm 620.173.00.1 CuSn4Zn2PS, d=32mm, Rp=1", d1=32mm 620.154.00.1 CuSn4Zn2PS, d=40mm, Rp=1/2", d1=40mm 620.164.00.1 CuSn4Zn2PS, d=40mm, Rp=3/4", d1=40mm 620.174.00.1 CuSn4Zn2PS, d=40mm, Rp=1", d1=40mm 620.184.00.1 CuSn4Zn2PS, d=40mm, Rp=1 1/4", d1=40mm 620.155.00.1 CuSn4Zn2PS, d=50mm, Rp=1/2", d1=50mm 620.165.00.1 CuSn4Zn2PS, d=50mm, Rp=3/4", d1=50mm 620.175.00.1 CuSn4Zn2PS, d=50mm, Rp=1", d1=50mm 620.185.00.1 CuSn4Zn2PS, d=50mm, Rp=1 1/2", d1=50mm 620.156.00.1 CuSn4Zn2PS, d=63mm, Rp=1/2", d1=63mm 620.166.00.1 CuSn4Zn2PS, d=63mm, Rp=1", d1=63mm 620.176.00.1 CuSn4Zn2PS, d=63mm, Rp=2", d1=63mm 620.177.00.1 CuSn4Zn2PS, d=75mm, Rp=1", d1=75mm FlowFit adapter to Geberit Mepla: 620.090.00.1 CuZn21Si3P, d=16mm, d1=16mm 620.091.00.1 CuZn21Si3P, d=20mm, d1=20mm 620.092.00.1 CuZn21Si3P, d=25mm, d1=26mm 620.093.00.1 CuZn21Si3P, d=32mm, d1=32mm 620.094.00.1 CuZn21Si3P, d=40mm, d1=40mm 620.095.00.1 CuZn21Si3P, d=50mm, d1=50mm 620.096.00.1 CuZn21Si3P, d=63mm, d1=63mm 620.097.00.1 CuZn21Si3P, d=75mm, d1=75mm FlowFit adapter to Geberit Mapress, with plain end 620.230.00.1 CuSn4Zn2PS, d=16mm, d1=12mm 620.240.00.1 CuSn4Zn2PS, d=16mm, d1=15mm 620.231.00.1 CuSn4Zn2PS, d=20mm, d1=15mm 620.241.00.1 CuSn4Zn2PS, d=20mm, d1=18mm 620.242.00.1 CuSn4Zn2PS, d=20mm, d1=22mm 620.232.00.1 CuSn4Zn2PS, d=25mm, d1=22mm 620.233.00.1 CuSn4Zn2PS, d=32mm, d1=28mm 620.234.00.1 CuSn4Zn2PS, d=40mm, d1=35mm 620.235.00.1 CuSn4Zn2PS, d=50mm, d1=42mm 620.236.00.1 CuSn4Zn2PS, d=63mm, d1=54mm 620.250.00.1 X5CrNiMo17-12-2, d=16mm, d1=15mm 620.251.00.1 X5CrNiMo17-12-2, d=20mm, d1=18mm 620.252.00.1 X5CrNiMo17-12-2, d=20mm, d1=22mm 620.253.00.1 X5CrNiMo17-12-2, d=25mm, d1=22mm 620.254.00.1 X5CrNiMo17-12-2, d=32mm, d1=28mm 620.255.00.1 X5CrNiMo17-12-2, d=40mm, d1=35mm 620.256.00.1 X5CrNiMo17-12-2, d=50mm, d1=42mm 620.257.00.1 X5CrNiMo17-12-2, d=63mm, d1=54mm FlowFit adapter to Geberit Mapress, with pressing socket 620.329.00.1 X5CrNiMo17-12-2, d=16mm, d1=12mm 620.332.00.1 X5CrNiMo17-12-2, d=16mm, d1=15mm 620.347.00.1 X5CrNiMo17-12-2, d=20mm, d1=15mm 620.333.00.1 X5CrNiMo17-12-2, d=20mm, d1=18mm 620.334.00.1 X5CrNiMo17-12-2, d=20mm, d1=22mm 620.335.00.1 X5CrNiMo17-12-2, d=25mm, d1=22mm 620.336.00.1 X5CrNiMo17-12-2, d=32mm, d1=28mm 620.337.00.1 X5CrNiMo17-12-2, d=40mm, d1=35mm 620.338.00.1 X5CrNiMo17-12-2, d=50mm, d1=42mm 620.339.00.1 X5CrNiMo17-12-2, d=63mm, d1=54mm FlowFit adapter with male thread 620.300.00.1 CuZn21Si3P, d=16mm, R=3/8" 620.301.00.1 CuZn21Si3P, d=20mm, R=3/8" 620.302.00.1 CuZn21Si3P, d=25mm, R=1/2" 620.303.00.1 CuZn21Si3P, d=32mm, R=1" 620.304.00.1 CuZn21Si3P, d=40mm, R=1" 620.305.00.1 CuZn21Si3P, d=50mm, R=1 1/2" 620.306.00.1 CuZn21Si3P, d=63mm, R=2" 620.307.00.1 CuZn21Si3P, d=75mm, R=2 1/2" 620.310.00.1 CuZn21Si3P, d=16mm, R=1/2" 620.311.00.1 CuZn21Si3P, d=20mm, R=1/2" 620.312.00.1 CuZn21Si3P, d=25mm, R=3/4" 620.313.00.1 CuZn21Si3P, d=32mm, R=1 1/4" 620.314.00.1 CuZn21Si3P, d=40mm, R=1 1/4" 620.315.00.1 CuZn21Si3P, d=50mm, R=2" 620.316.00.1 CuZn21Si3P, d=63mm, R=2 1/2" 620.320.00.1 CuZn21Si3P, d=16mm, R=3/4" 620.321.00.1 CuZn21Si3P, d=20mm, R=3/4" 620.322.00.1 CuZn21Si3P, d=25mm, R=1" 620.324.00.1 CuZn21Si3P, d=40mm, R=1 1/2" 619.700.00.1 X5CrNiMo17-12-2, d=20mm, R=1/2" 619.701.00.1 X5CrNiMo17-12-2, d=25mm, R=3/4" 619.702.00.1 X5CrNiMo17-12-2, d=32mm, R=1" 619.703.00.1 X5CrNiMo17-12-2, d=40mm, R=1 1/4" 619.704.00.1 X5CrNiMo17-12-2, d=50mm, R=1 1/2" 619.705.00.1 X5CrNiMo17-12-2, d=63mm, R=2" 619.706.00.1 X5CrNiMo17-12-4, d=75mm, R=2 1/2" FlowFit adapter with female thread: 620.400.00.1 CuZn21Si3P, d=16mm, Rp=3/8" 620.410.00.1 CuZn21Si3P, d=16mm, Rp=1/2" 620.420.00.1 CuZn21Si3P, d=16mm, Rp=3/4" 620.401.00.1 CuZn21Si3P, d=20mm, Rp=3/8" 620.411.00.1 CuZn21Si3P, d=20mm, Rp=1/2" 620.421.00.1 CuZn21Si3P, d=20mm, Rp=3/4" 620.402.00.1 CuZn21Si3P, d=25mm, Rp=3/4" 620.412.00.1 CuZn21Si3P, d=25mm, Rp=1" 620.403.00.1 CuZn21Si3P, d=32mm, Rp=1" 620.413.00.1 CuZn21Si3P, d=32mm, Rp=1 1/4" 620.404.00.1 CuZn21Si3P, d=40mm, Rp=1" 620.414.00.1 CuZn21Si3P, d=40mm, Rp=1 1/4" 620.424.00.1 CuZn21Si3P, d=40mm, Rp=1 1/2" 620.405.00.1 CuZn21Si3P, d=50mm, Rp=1 1/2" 620.415.00.1 CuZn21Si3P, d=50mm, Rp=2" 620.406.00.1 CuZn21Si3P, d=63mm, Rp=2" 620.416.00.1 CuZn21Si3P, d=63mm, Rp=2 1/2" 620.407.00.1 CuZn21Si3P, d=75mm, Rp=2 1/2" FlowFit bend adapter 90° with male thread 620.510.00.1 CuSn4Zn2PS, d=16mm, R=1/2" 620.520.00.1 CuSn4Zn2PS, d=16mm, R=3/4" 620.511.00.1 CuSn4Zn2PS, d=20mm, R=1/2" 620.521.00.1 CuSn4Zn2PS, d=20mm, R=3/4" 620.502.00.1 CuSn4Zn2PS, d=25mm, R=3/4" 620.512.00.1 CuSn4Zn2PS, d=25mm, R=1" 620.503.00.1 CuSn4Zn2PS, d=32mm, R=1" 620.504.00.1 CuSn4Zn2PS, d=40mm, R=1 1/4" 620.505.00.1 CuSn4Zn2PS, d=50mm, R=1 1/2" 620.506.00.1 CuSn4Zn2PS, d=63mm, R=2" FlowFit 90° bend adapter with male thread, long: 620.522.00.1 CuSn4Zn2PS, d=16mm, R=1/2" 620.523.00.1 CuSn4Zn2PS, d=16mm, R=3/4" 620.524.00.1 CuSn4Zn2PS, d=20mm, R=1/2" 620.525.00.1 CuSn4Zn2PS, d=20mm, R=3/4" 620.526.00.1 CuSn4Zn2PS, d=25mm, R=3/4" 620.527.00.1 CuSn4Zn2PS, d=25mm, R=1" 620.528.00.1 CuSn4Zn2PS, d=32mm, R=1" FlowFit bend adapter 90° with female thread 620.532.00.1 CuSn4Zn2PS, d=25mm, Rp=3/4" 620.533.00.1 CuSn4Zn2PS, d=32mm, Rp=1" 620.534.00.1 CuSn4Zn2PS, d=40mm, Rp=1 1/4" 620.535.00.1 CuSn4Zn2PS, d=50mm, Rp=1 1/2" 620.536.00.1 CuSn4Zn2PS, d=63mm, Rp=2" 620.540.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2" 620.541.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2" 620.542.00.1 CuSn4Zn2PS, d=25mm, Rp=1" 620.550.00.1 CuSn4Zn2PS, d=16mm, Rp=3/4" 620.551.00.1 CuSn4Zn2PS, d=20mm, Rp=3/4" FlowFit adapter with MasterFix 620.290.00.1 PPSU, d=16mm, RpMF=1/2" 620.291.00.1 PPSU, d=20mm, RpMF=1/2" FlowFit elbow adapter 90° with MasterFix: 620.490.00.1 PPSU, d=16mm, RpMF=1/2" 620.491.00.1 PPSU, d=20mm, RpMF=1/2" FlowFit T-piece adapter with MasterFix, through-flow 620.380.00.1 PPSU, d=16mm, RpMF=1/2", d1=16mm 620.381.00.1 PPSU, d=20mm, RpMF=1/2", d1=16mm 620.391.00.1 PPSU, d=20mm, RpMF=1/2", d1=20mm 620.382.00.1 PPSU, d=25mm, RpMF=1/2", d1=20mm 620.392.00.1 PPSU, d=25mm, RpMF=1/2", d1=25mm 620.780.00.1 PPSU, d=16mm, d1=16mm, RpMF1=1/2" 620.781.00.1 PPSU, d=20mm, d1=20mm, RpMF1=1/2" FlowFit adapter to Compact 620.560.00.1 CuZn21Si3P, d=16mm, di=21mm 620.561.00.1 CuZn21Si3P, d=20mm, di=21mm 620.562.00.1 CuZn21Si3P, d=25mm, di=21mm FlowFit screw connection 620.570.00.1 CuZn21Si3P, d=16mm 620.571.00.1 CuZn21Si3P, d=20mm 620.572.00.1 CuZn21Si3P, d=25mm 620.573.00.1 CuZn21Si3P, d=32mm 620.574.00.1 CuZn21Si3P, d=40mm 620.575.00.1 CuZn21Si3P, d=50mm 620.576.00.1 CuZn21Si3P, d=63mm FlowFit adapter union with clamping ring 620.680.00.1 CuZn21Si3P, d=16mm, d1=12mm 620.690.00.1 CuZn21Si3P, d=16mm, d1=15mm 620.681.00.1 CuZn21Si3P, d=20mm, d1=15mm FlowFit elbow adapter 90° with clamping ring union 620.700.00.1 CuSn4Zn2PS, d=16mm, d1=12mm 620.710.00.1 CuSn4Zn2PS, d=16mm, d1=15mm 620.701.00.1 CuSn4Zn2PS, d=20mm, d1=15mm 620.720.00.1 CuZn21Si3P / Cu, d=16mm, d1=15mm 620.721.00.1 CuZn21Si3P / Cu, d=20mm, d1=15mm 620.722.00.1 CuZn21Si3P / Cu, d=25mm, d1=22mm FlowFit adapter with screw connection to PEX pipes: 620.730.00.1 CuZn21Si3P, d=16mm, d1=16mm, PN=6bar 620.731.00.1 CuZn21Si3P, d=20mm, d1=20mm, PN=6bar 620.732.00.1 CuZn21Si3P, d=25mm, d1=25mm, PN=6bar FlowFit pipe end plug 620.740.00.1 CuZn21Si3P, d=16mm 620.741.00.1 CuZn21Si3P, d=20mm 620.742.00.1 CuZn21Si3P, d=25mm FlowFit tap connector box 90° with MasterFix 650.681.00.3 CC499K, d=16mm, Rp=1/2" 651.681.00.3 CC499K, d=20mm, Rp=1/2" 652.682.00.3 CC499K, d=20mm, Rp=3/4" Tap connector box 90° for MasterFix 650.687.00.3 CC499K, Rp=1/2" 650.688.00.3 CC499K, Rp=3/4" FlowFit double tap connector box 90° with MasterFix 650.683.00.3 CC499K, d=16mm, Rp=1/2", d1=16mm 652.685.00.3 CC499K, d=20mm, Rp=1/2", d1=16mm Double tap connector box 90° for MasterFix 650.689.00.3 CC499K, Rp=1/2" FlowFit tap connector box 90° with MasterFix, premounted 650.791.00.3 CC499K, d=16mm, Rp=1/2", AD=15.3cm 651.791.00.3 CC499K, d=20mm, Rp=1/2", AD=15.3cm 650.792.00.3 CC499K, Rp=1/2", RMF=1/2", AD=15.3cm FlowFit connection bend 90° 620.802.00.1 CuSn4Zn2PS, d=25mm, Rp=3/4", L=5.2cm 620.750.00.1 CuSn4Zn2PS, d=16mm, Rp=3/8", L=3.6cm 620.751.00.1 CuSn4Zn2PS, d=20mm, Rp=3/8", L=3.6cm 620.760.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L=3.6cm 620.761.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L=3.6cm 620.810.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L=5.2cm 620.811.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L=5.2cm 620.821.00.1 CuSn4Zn2PS, d=20mm, Rp=3/4", L=5.2cm 620.770.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L=7.8cm 620.771.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L=7.8cm 620.800.00.1 CuSn4Zn2PS, d=16mm, Rp=3/8", L=5.2cm 620.801.00.1 CuSn4Zn2PS, d=20mm, Rp=3/8", L=5.2cm FlowFit T-elbow tap connector 90°, offset 620.951.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=20mm, L=3.6cm 620.981.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=20mm, L=5.2cm FlowFit double elbow tap connector 90°: 620.830.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", d1=16mm, L=5.2cm 620.831.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", d1=20mm, L=5.2cm 620.832.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=25mm, L=5.2cm 620.841.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=16mm, L=5.2cm 620.842.00.1 CuSn4Zn2PS, d=25mm, Rp=1/2", d1=20mm, L=5.2cm 620.851.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", d1=20mm, L=5.2cm 620.852.00.1 CuSn4Zn2PS, d=25mm, Rp=1/2", d1=25mm, L=5.2cm FlowFit corner elbow connector 90° 620.881.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L=3.6cm 620.921.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L=5.2cm FlowFit set of connection bend 90°, double 619.620.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L1=4.7cm, AD=15cm 619.621.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm, AD=15cm FlowFit connection bend 90°, premounted 619.630.00.1 single: CuSn4Zn2PS, d=16mm, Rp=1/2", L1=5.2cm 619.631.00.1 single: CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm FlowFit elbow tap connector 90°, premounted, double 619.640.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L1=5.2cm, AD=15.3cm 619.651.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm, AD=15.3cm 619.641.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm, AD=10cm FlowFit PushFit tap connector box 90° pre-mounted, double 619.661.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm, AD=15.3cm FlowFit elbow tap connector 90°, premounted, double 619.671.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=7.8cm, AD=15.3cm FlowFit connection bend 90°, premounted, double, with drain pipe bracket and connection bend 619.681.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2", L1=5.2cm, AD=15.3cm FlowFit elbow tap connector 90°, premounted, double 619.690.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2", L1=3.6cm, AD=15.3cm FlowFit elbow tap connector 90° for concealed cistern: 620.790.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2" 620.791.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2" FlowFit Mepla elbow tap connector 90° for concealed cistern 620.890.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2" 620.891.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2" FlowFit FloiwFit connector T-piece for concealed cistern 620.990.00.1 CuSn4Zn2PS, d=16mm, Rp=1/2" 620.991.00.1 CuSn4Zn2PS, d=20mm, Rp=1/2" Manifold with threaded connection and connection nipple for manifold, for MasterFix 653.428.00.1 CC770S, Rp=3/4", RMF1=1/2", R1=3/4", 2 outlets 653.429.00.1 CC770S, Rp=3/4", RMF1=1/2", R1=3/4", 3 outlets Offset bend with male thread 653.478.00.1 CC499K, R=3/4" Cap with MasterFix 653.420.00.1 CW617N, RpMF=1/2" FlowFit connection nipple for manifold, for Euro cone 620.330.00.1 CuZn21Si3P, d=16mm, G=3/4" 620.331.00.1 CuZn21Si3P, d=20mm, G=3/4"

Approval Holder:

Geberit Sales Ltd.

Company Name

Geberit Sales Ltd.

Address

Geberit House, Edgehill Drive, Warwick

Postcode

CV34 6NH

Country

United Kingdom

Phone

01926516800

General Email

enquiries@geberit.co.uk

View All Listings by this Company

Manufacturer:

Geberit Sales Ltd.

Company Name

Geberit Sales Ltd.

Address

Geberit House, Edgehill Drive, Warwick

Postcode

CV34 6NH

Country

United Kingdom

Phone

01926516800

General Email

enquiries@geberit.co.uk

View All Listings by this Company

‘Hetta system’ consisting of brass bodied nickel plated, compression or press fit (‘U’ crimping profile) fittings for use with multilayer pipe PERT/AL/PERT. Maximum working pressure 10.0 Bar. Maximum working temperature 95°C.

Section:

1106 Multi-Layered Pipe Systems: incorporating an Aluminium layer

Section Subtitle:

Compatible fittings and pipe systems. Unless specified in the individual approval, the products within this section are not suitable for below ground use Because there are no accepted tests, WRAS approval of barrier pipe does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe from the surrounding soil.

WRAS Approval Number:

2311919

Size:

Compression: 16mm, 20mm. Press Fittings: 16mm, 20mm, 25mm, 32mm, 40mm, 63mm. Pipe: 16 - 63mm.

Marking:

Compression fittings: Tweetop ‘T’ logo, size, EN1254-3, production date and manufacturing source on compression nut. Press fittings: Tweetop ‘T’ logo, letter for Type (L for elbow; T for Tee) and size on Body. Tweetop name and ‘T’ logo, size, U (press profile), ISO standard, production date and manufacturing source on sleeve. Key to production date/manufacturing source = aAY, with a (month), A (Year), Y (production facility). Where: a = Month, starting with a = January, b= February etc. A = Year, starting with G = 2018, H = 2019, I = 2020, J = 2021, K = 2022, L = 2023. Y = Manufacturing facility denoted by the letter L, S or A. e.g. bGA = manufactured February 2018 by facility A Pipe: , Hetta Systems, size, pressure ratings and date of manufacture (YYYY/MM/DD).

Installation Requirements:

R001

Expiry date:

30/11/2028

Model:

PRESS COUPLING: 06011003 - 16x16, 06011005 - 18x18, 06011007 - 20x20, 06011009 - 25x25, 06011011 - 32x32, 06011013 - 40x40, 06011015 - 50x50, 06011017 - 63x63. PRESS COUPLING-REDUCER: 06011103 - 18x16, 06011105 - 20x16, 06011107 - 25x16, 06011109 - 32x16, 06011111 - 20x18, 06011113 - 25x18, 06011115 - 32x18, 06011117 - 25x20, 06011119 - 32x20, 06011121 - 32x25, 06011122 - 40x20, 06011123 - 40x25, 06011124 - 50x25, 06011125 - 40x32, 06011126 - 50x32, 06011127 - 50x40, 06011120 - 63x25, 06011128 - 63x32, 06011129 - 63x40, 06011131 - 63x50. MALE PRESS CONNECTION: 06011205 - 16x½", 06011207 - 16x¾", 06011209 - 16x1", 06011211 - 18x½”, 06011213 - 18x¾”, 06011215 - 20x½", 06011217 - 20x¾", 06011219 - 20x1", 06011221 - 25x½", 06011223 - 25x¾", 06011225 - 25x1", 06011227 - 32x¾", 06011229 - 32x1", 06011231 - 32x1½", 06011233 - 32x1¼", 06011235 - 40x1¼", 06011237 - 50x1½", 06011239 - 50x2", 06011241 - 63x2". FEMALE PRESS CONNECTION: 06011305 - 16x½", 06011307 - 16x¾", 06011309 - 16x1", 06011311 - 18x½”, 06011313 - 18x¾”, 06011315 - 20x½", 06011317 - 20x¾", 06011319 - 20x1", 06011321 - 25x½", 06011323 - 25x¾", 06011325 - 25x1", 06011327 - 32x¾", 06011329 - 32x1", 06011331 - 40x1¼", 06011333 - 50x1½". PRESS SCREW CONNECTION WITH FEMALE THREAD: 06011403 - 16x½", 06011405 - 20x¾", 06011407 - 20x1", 06011409 - 25x¾", 06011411 - 25x1", 06011413 - 32x1". PRESS ELBOW 90: 06012003 - 16x16, 06012005 - 18x18, 06012007 - 20x20, 06012009 - 25x25, 06012011 - 32x32, 06012013 - 40x40, 06012015 - 50x50, 06012017 - 63x63. PRESS ELBOW 90 WITH MALE thread: 06012103 - 16x½", 06012107 - 16x¾", 06012105 - 18x½”, 06012109 - 20x½", 06012111 - 20x¾", 06012113 - 25x½", 06012115 - 25x¾", 06012117 - 25x1", 06012119 - 32x1", 06012121 - 40x1". PRESS ELBOW 90 WITH FEMALE thread: 06012203 - 16x½", 06012205 - 16x¾", 06012207 - 18x½", 06012209 - 20x½", 06012211 - 20x¾", 06012213 - 25x½", 06012215 - 25x¾", 06012217 - 25x1", 06012219 - 32x1", 06012222 - 40x1½", 06012225 - 50x1½". PRESS ELBOW 90 REDUCER: 06012303 - 20x16, 06012305 - 25x16, 06012307 - 25x20, 06012309 - 32x20, 06012311 - 40x25, 06012313 - 40x32. PRESS ELBOW 90 - TAP CONNECTION: 06012403 - 16x½", 06012404 - 16x½"x16, 06012405 - 18x½", 06012407 - 20x½". PRESS TEE: 06013003 - 16x16x16, 06013005 - 18x18x18, 06013007 - 20x20x20, 06013009 - 25x25x25, 06013011 - 32x32x32, 06013013 - 40x40x40, 06013015 - 50x50x50, 06013017 - 63x63x63.

PRESS TEE WITH REDUCER: 06013103 - 16x25x16, 06013105 - 16x20x16, 06013106 - 16x18x16, 06013107 - 20x16x16, 06013108 - 18x16x16, 06013109 - 20x16x20, 06013110 - 18x16x18, 06013111 - 20x18x20, 06013113 - 20x20x16, 06013115 - 20x25x20, 06013117 - 25x16x25, 06013119 - 25x18x25, 06013121 - 25x20x25, 06013123 - 25x20x20, 06013125 - 25x25x20, 06013127 - 25x32x25, 06013129 - 32x16x32, 06013131 - 32x20x32, 06013133 - 32x25x32, 06013134 - 40x20x40, 06013135 - 40x25x40, 06013137 - 40x32x40, 06013138 - 50x25x50, 06013139 - 50x32x50, 06013141 - 50x40x50, 06013142 - 63x32x63, 06013143 - 63x40x63, 06013145 - 63x50x63. PRESS TEE WITH FEMALE thread: 06013203 - 16x½"x16, 06013205 - 20x½"x20, 06013207 - 20x¾"x20, 06013209 - 25x½"x25, 06013211 - 25x¾"x25, 06013213 - 25x1"x25, 06013215 - 32x¾"x32, 06013217 - 32x1"x32, 06013219 - 40x¾"x40. PRESS TEE WITH MALE thread: 06013303 - 16x½"x16, 06013305 - 20x½"x20. BRASS STOP END PRESS FIT: 06011803 - 16. COMPRESSION COUPLING: 06021001 - 16x16, 06021003 - 20x20 . COMPRESSION COUPLING REDUCER: 06021101 - 20x16, 06021103 - 25x20. MALE COMPRESSION CONNECTION: 06021201 - 16x½", 06021203 - 16x¾", 06021205 - 16x1", 06021207 - 20x½", 06021209 - 20x¾", 06021211 - 20x1". FEMALE COMPRESSION CONNECTION: 06021301 - 16x½", 06021303 - 16x¾", 06021305 - 16x1" , 06021307 - 20x½", 06021309 - 20x¾", 06021311 - 20x1". COMPRESSION ELBOW 90: 06022001 - 16x16, 06022003 - 20x20. COMPRESSION ELBOW 90 WITH MALE thread: 06022101 - 16x½", 06022103 - 16x¾", 06022105 - 20x½", 06022107 - 20x¾". COMPRESS. ELBOW 90 WITH FEMALE thread: 06022201 - 16x½", 06022203 - 16x¾", 06022205 - 20x½", 06022207 - 20x¾". COMPRESSION TEE: 06030201 - 16x16x16, 06030203 - 20x20x20. COMPRESSION TEE WITH REDUCER: 06031201 - 16x25x16, 06031203 - 20x16x20, 06031205 - 20x25x20. COMPRESSION TEE WITH FEMALE thread: 06032201 - 16x½"x16, 06032203 - 20x½"x20, 06032205 - 20x¾"x20. COMPRESSION TEE WITH MALE thread: 06033201 - 16x½"x16, 06033203 - 20x½"x20. COMPRESSION ELBOW 90 - TAP CONN: 06022401 - 16x½"F, 06022403 - 20x½"F. COMPRESSION FOUR WAY FITTING: 06024001 - 16x16x16x16, 06024003 - 20x20x20x20. MULTILAYER PIPE PERT/AL/PERT: 06010103/100 - 16x2, 06010103/200 - 16x2, 06010103/600 - 16x2, 06010103/4 - straight bars 16x2,0, 06010105/200 - 18x2, 06010107/100 - 20x2, 06010107/200 - 20x2, 06010107/4 - straight bars 20x2,0, 06010109/50 - 25x2,5, 06010109/100 - 25x2,5, 06010109/4 - straight bars 25x2,5, 06010111/50 - 32x3, 06010111/4 - straight bars 32x3,0, 06010113 - straight bars 40x4,0, 06010115 - straight bars 50x4,5, 06010117 - straight bars 63x6,0, 06010103/100 - 16x2.

Approval Holder:

Hetta Systems (UK) Ltd.

Company Name

Hetta Systems (UK) Ltd.

Address

UNIT E5 TRIDENT BUSINESS PARK DATEN AVENUE

Postcode

WA3 6AX

Country

WARRINGTON

View All Listings by this Company

Manufacturer:

Tweetop Sp Z.o.o

Company Name

Tweetop Sp Z.o.o

Address

ul.Ludowa 24 C 71-700 Szczecin Poland

View All Listings by this Company

Instantor range of brass compression fittings for use with copper pipe (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:

1140 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2312342

Size:

8mm, 10mm, 12mm, 15mm, 22mm & 28mm

Marking:

Instantor, size & EN1254-2 on nut. ‘S’ cast on body of tee piece.

Installation Requirements:

R001

Expiry date:

31/12/2028

Model:

Instantor range comprising of models: Straight Coupler 410077 8mm C x C 410088 10mm C x C 410099 12mm C x C 410001 15mm C x C 410002 22mm C x C 410003 28mm C x C Straight Coupler Adaptor 410087 10 x 8mm C x C 410017 15 x 8mm C x C 410098 12 x 10mm C x C 410018 15 x 10mm C x C 410019 15 12mm C x C 410021 22 x 15mm C x C 410022 22mm x 3/4" C x C 410032 28 x 22mm C x C Straight Coupler 411077 8mm x 1/4" C x M.I 411079 8mm x 3/8" C x M.I 411071 8mm x 1/2" C x M.I 411087 10mm x 1/4" C x M.I 411089 10mm x 3/8" C x M.I 411081 10mm x 1/2" C x M.I Straight Coupler 411019 15mm x 3/8" C x M.I 411001 15mm x 1/2" C x M.I 411012 15mm x 3/4" C x M.I 411021 22mm x 1/2" C x M.I 411002 22mm x 3/4" C x M.I 411023 22mm x 1" C x M.I 411032 28mm x 3/4" C x M.I 411003 28mm x 1" C x M.I Straight Coupler 412079 8mm x 3/8" C x F.I. 412087 10mm 1/4" C x F.I. 412081 10mm x 1/2" C x F.I. 412089 10mm x 3/8" C x F.I. 412091 12mm x 1/2" C x F.I. 412019 15mm x 3/8" C x F.I. 412001 15mm x 1/2" C x F.I. 412012 15mm x 3/4" C x F.I. 412021 22mm x 1/2" C x F.I. 412002 22mm x 3/4" C x F.I. 412023 22mm x 1" C x F.I. 412032 28mm x 3/4" C x F.I. 412003 28mm x 1" C x F.I. Elbow 415077 8mm C x C 415088 10mm C x C 415001 15mm C x C 415002 22mm C x C 415003 28mm C x C 415021 22mm x 15mm C x C Elbow 416087 10mm x 1/4" C x M.I. 416089 10mm x 3/8" C x M.I. 416081 10mm x 1/2" C x M.I. 416001 15mm x 1/2" C x M.I. 416012 15mm x 3/4" C x M.I. 416021 22mm x 1/2" C x M.I. 416002 22mmx 3/4" C x M.I. 416023 22mm x 1" C x M.I. 416032 28mm x 3/4" C x M.I. 416003 28mm x 1" C x M.I. Elbow 417001 15mm x 1/2" C x F.I. 417021 22mm x 1/2" C x F.I. 417002 22mm x 3/4" C x F.I. 417023 22mm x 1" C x F.I. 417003 28mm x 1" C x F.I. 417012 3/4" x 15mm F.I. x C Equal Tee's 418777 8mm C x C x C 418888 10mm C x C x C 418001 15mm C x C x C 418002 22mm C x C x C 418003 28mm C x C x C Reducing Tee's 418211 22 x 15 x 15mm C x C x C 418212 22 x 15 x 22mm C x C x C 418221 22 x 22 x 15mm C x C x C 418313 28 x 15 x28mm C x C x C 418331 28 x 28 x 15mm C x C x C 418322 28 x 22 x 22mm C x C x C 418323 28 x 22 x 28mm C x C x C 418332 28 x 28 x 22mm C x C x C Wallplate Elbow 419001 15mm x 1/2" C x F.I. 421001 15mm x 1/2" C x F.I. HD 421002 22mm x 3/4" C x F.I. HD 430001 15mm x 15mm x 1/2" 430 Tee C x C x F.I 430002 22mm x 22mm x 3/4" 430 Tee C x C x F.I Stop End Compression 451007 8mm 451008 10mm 451001 15mm 451002 22mm 451003 28mm Compression Nut 478008 10mm 478A 478009 12mm 478A 478001 15mm 478A 478002 22mm 478A 478003 28mm 478A Compression Ring 479007 8mm 478B 479008 10mm 478B 479001 15mm 478B 479002 22mm 478B 479003 28mm 478B

Approval Holder:

Sanbra Fyffe Ltd.

Company Name

Sanbra Fyffe Ltd.

Address

Conex Works, Santry Avenue, Dublin

Postcode

D09 K160

Country

Ireland

Phone

353 1 842 6255

General Email

sales@sanbra.ie

View All Listings by this Company