Directory Search Results

Print List

#2204039

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (various finishes, see models). Flow is controlled by a solenoid valve activated via an infra-red sensor. The products incorporate a hand dryer feature that are activated via an infra-red sensor. The spout outlet incorporates a plastic aerator. The products are supplied with a metal backnut. Maximum working pressure 8.0 bar. Cold water use only.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2204039
Size:
Stainless steel braided, PEX lined flexible hose assembly with ½" captive nut end connection
Marking:
AIKE on dryer unit (Model AK7120 only) AIKE on end of tap and AIKE on dryer unit (Models AK7130 & AK7131)
Installation Requirements:
R001 R006
Expiry date:
30/04/2027
Model:
AK7120 AIR TAP (Chrome) AK7130 AIR TAP (brushed steel) AK7131 AIR TAP (brushed steel)
Product Images

Approval Holder:
Zhejiang AIKE Appliances Co., Ltd.
Company Name
Zhejiang AIKE Appliances Co., Ltd.
Address
Yong'an Industry Zone Xianju City 317306 Zhejiang
Country
China

View All Listings by this Company

Print This Approval


#2210016

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (chrome plated brass). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlet incorporates a plastic aerator and the inlets incorporates stainless steel strainers. Models 351500 & 351510 incorporate an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Models are either cold/premixed water only or hot and cold supply with a manually adjustable temperature lever. Maximum working pressure 8.0 bar. Maximum operating temperature 70°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2210016
Size:
Stainless steel braided flexible hose assemblies incorporating polyethylene liners and 3/8" BSP (F) captive nuts
Marking:
Stern of front base of tap body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/10/2027
Model:
351020 QUADRAT DM B 351010 QUADRAT DM E 351500 QUADRAT 1000 DMB 351510 QUADRAT 1000 DME
Product Images

Approval Holder:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd. Yavne
Postcode
8122217
Country
Israel
Phone
+972 8 9326007
General Email
leah@sternfaucets.com

View All Listings by this Company

Print This Approval


#2210017

‘Tubular’ range of wall mounted spout outlets (chromium plated brass). The flow is controlled by a solenoid valve activated via an infra-red sensor. The box assembly incorporates a solenoid valve, screwdriver operated spherical valve and the spout outlet incorporates a plastic aerator. Maximum working pressure 8.0 bar. Maximum operating temperature 65°C.

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2210017
Size:
½” BSP (M)
Marking:
Stern on front face of spout.
Installation Requirements:
R001 R040
Expiry date:
31/10/2027
Model:
Tubular 2030B (model code 350300). Tubular 2030E (model code 350400). Tubular 2030 LB (model code 350310). Tubular 2030 LE (model code 350410).
Product Images

Approval Holder:
Y. Stern Engineering (1989) Ltd
Company Name
Y. Stern Engineering (1989) Ltd
Address
15 Gan Rave Blvd. Yavne
Postcode
8122217
Country
Israel
Phone
+972 8 9326007
General Email
leah@sternfaucets.com

View All Listings by this Company

Print This Approval


#2211028

Range of single hole, single outlet (fixed) electronically controlled tap assemblies (chrome plated brass). Flow is controlled by a solenoid valve activated by via an infra-red sensor. The spout outlet incorporates a plastic flow straightener. Maximum working pressure 1.0 bar. Maximum operating temperature 65°C

Section:
0684 Combination Tap Assemblies
Section Subtitle:
Tap(s) with a non-touch methods of flow control and a single inlet.
WRAS Approval Number:
2211028
Size:
½” BSP (M)
Marking:
INTA on top of tap. Model on rear of body.
Installation Requirements:
R001 R006 R008 R570
Expiry date:
30/11/2027
Model:
IR500CP – Infrared basin tap battery operated IR501CP - Infrared basin tap mains operated
Product Images

Approval Holder:
Intatec Limited
Company Name
Intatec Limited
Address
Airfield Industrial Estate Hixon Staffordshire
Postcode
ST18 0PF
Country
United Kingdom
Phone
01889272180
General Email
ryan.tilsley@intatec.co.uk

View All Listings by this Company

Print This Approval


#2203336

WC flushing cistern incorporating a side entry BS1212-4 (2016) compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 5.5 litres and a reduced flush of up to 2.7 litres and incorporates a servicing valve and flexible hose on the inlet supply. The cistern is operated by a manually operated push button. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2203336
Size:
½” BSP (F)
Marking:
TECE on flush plate, model number, QR code on adhesive label on frame. 6L waterline, TECE, manufacture time & date inside of cistern.
Installation Requirements:
R001 R556 R581
Expiry date:
31/03/2027
Model:
9300377 TECEprofil toilet module "Design" with Uni cistern, installation height 1120mm 9300329 TECEprofil toilet module "Design" with Uni cistern, installation height 980mm 9300378 TECEprofil toilet module "Design" with Uni cistern, installation height 820mm 9041336 TECEbox toilet connection unit "Design" with Uni cistern, installation height 1060mm 9041335 TECEbox toilet connection unit "Design" with Uni cistern, installation height 820mm 9400302 TECEconstruct toilet module "Professional" with Uni cistern, installation height 1120mm. 9400303 TECEconstruct toilet module "Professional" with Uni cistern, installation height 980mm 9400304 TECEconstruct toilet module "Professional" with Uni cistern, installation height 820mm Model added February 2023 9041337 TECEbox toilet connection unit "Design" with Uni cistern, installation height 980mm
Product Images

Approval Holder:
TECE GmbH
Company Name
TECE GmbH
Address
Hellefeldstr. 57 48282 Emsdetten
Country
Germany

View All Listings by this Company
Manufacturer:
TECE GmbH
Company Name
TECE GmbH
Address
Hellefeldstr. 57 48282 Emsdetten
Country
Germany

View All Listings by this Company

Print This Approval


#2111381

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only. .

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2111381
Size:
½” BSP (M)
Marking:
Adhesive below insert within cistern: Dolphin, product date DD/MM/YY. 6L waterline within cistern
Installation Requirements:
R001 R556
Expiry date:
30/11/2026
Model:
DB551x.M & DB551x.P x’ is replaced by a number from 0 to 9 to indicate the type of mounting or frame supplied attached to the cistern. For example, ‘0’ indicates mounting plastic mounting brackets, ‘1’ indicates a powder coated steel floor mounted frame. This has no effect on any of the parts in contact with water.

Approval Holder:
Dolphin Solutions Limited
Company Name
Dolphin Solutions Limited
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company

Print This Approval


#2112363

Range of concealed WC flushing cisterns incorporating a side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2112363
Size:
½” BSP (M)
Marking:
Dolphin logo on adhesive label below insert within cistern: 6L waterline on casing within cistern Dolphin logo on flush plate
Installation Requirements:
R001 R556 R571
Expiry date:
31/12/2026
Model:
DB552x.M, DB552x.M, DB552x.M, DB552x.M.1130, DB552x.P.1130 & DB552x.C.1130 concealed WC flushing cisterns ‘x’ is replaced by a number from 0 to 9 to indicate the type of mounting or frame supplied attached to the cistern. For example, ‘0’ indicates plastic mounting brackets, ‘1’ indicates a powder coated steel floor mounted frame. This has no effect on any of the parts in contact with water.

Approval Holder:
Dolphin Solutions Limited
Company Name
Dolphin Solutions Limited
Address
Southpoint Compass Park Bodiam East Sussex
Postcode
TN32 5BS
Country
United Kingdom

View All Listings by this Company

Print This Approval


#2206363

Range of concealed WC flushing cisterns incorporating a BS 1212-4 side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 3 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2206363
Size:
½” BSP (M).
Marking:
Geberit on adhesive label on front of cistern Model No. & other information on adhesive label within cistern 6L waterline mould on cistern.
Installation Requirements:
R001 R556 R571 R581
Expiry date:
30/06/2027
Model:
109.205.00.1 Geberit Kappa concealed cistern 15 cm, 6 / 3 litres, installation height 82 cm. 111.260.00.1 Geberit Duofix frame for wall-hung WC, 82 cm, with Kappa concealed cistern 15 cm. Model added July 2023: 111.260.00.3.
Product Images

Approval Holder:
Geberit Sales Ltd.
Company Name
Geberit Sales Ltd.
Address
Geberit House, Edgehill Drive, Warwick
Postcode
CV34 6NH
Country
United Kingdom
Phone
01926516800
General Email
enquiries@geberit.co.uk

View All Listings by this Company

Print This Approval


#2207046

Range of WC flushing cisterns incorporating a side entry BS 1212-4 (2016) compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve and flexible hose on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2207046
Size:
½” BSP (F)
Marking:
Roper Rhodes and models number on label on front of cistern. 6 Litre inside.
Installation Requirements:
R001 R556 R571 R581
Expiry date:
31/07/2027
Model:
TR9009 TR9005 TR9015 Models added March 2024 INST13005 INST13015 INST13009
Product Images

Approval Holder:
Roper Rhodes Ltd
Company Name
Roper Rhodes Ltd
Address
Brassmill Lane Industrial Estate Bath
Postcode
BA1 3JF
Country
United Kingdom
General Email
paulw@roperrhodes.co.uk

View All Listings by this Company

Print This Approval


#2206364

WC flushing cisterns incorporating a BS 1212-4 side entry compact type float operated inlet valve providing a Type AG air gap with a dual flush drop valve for full flush volumes of up to 6 litres and a reduced flush of up to 4 litres. The cistern is operated by a manual push button and incorporates a servicing valve on the inlet supply. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
2206364
Size:
½” BSP (F).
Marking:
VITRA on adhesive label & 6L water line on cistern.
Installation Requirements:
R001 R556 R571 R581
Expiry date:
30/06/2027
Model:
762-1735-01, 762-5805-01, 762-4805-01 & 762-5855-01 Model added April 2023: 732-5805-01.
Product Images

Approval Holder:
Eczacibasi Building Materials Vitra Faucet Division
Company Name
Eczacibasi Building Materials Vitra Faucet Division
Address
4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4 11300 Bozuyuk - Bilecik
Country
Turkey
Phone
+90 228 314 07 90

View All Listings by this Company
Manufacturer:
Eczacibasi Building Materials Vitra Faucet Division
Company Name
Eczacibasi Building Materials Vitra Faucet Division
Address
4 Eylul Mah. I.Inonu Cad. Duzdag Yolu1 No: 4 11300 Bozuyuk - Bilecik
Country
Turkey
Phone
+90 228 314 07 90

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 43 of 95

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.