“<A> Press Copper M Profile” series press fittings with a copper body and EPDM ‘O’-rings, for use with copper pipe manufactured to EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250102006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm - 54mm.

Marking:

A (manufacturers logo) and size on body.

Installation Requirements:

R001

Expiry date:

31/01/2030

Model:

<A> Press Copper M Profile series: 90° Street Bend: APWG5001 150000, APWG5001 180000, APWG5001 220000, APWG5001 280000, APWG5001 350000, APWG5001 420000, APWG5001 540000. 90° Bend: APWG5002 150000, APWG5002 180000, APWG5002 220000, APWG5002 280000, APWG5002 350000, APWG5002 420000, APWG5002 540000. 45° Obtuse Street Elbow: APWG5041 150000, APWG5041 180000, APWG5041 220000, APWG5041 280000, APWG5041 350000, APWG5041 420000, APWG5041 540000. 45° Obtuse Elbow: APWG5040 150000, APWG5040 180000, APWG5040 220000, APWG5040 280000, APWG5040 350000, APWG5040 420000, APWG5040 540000. Crossover Short: APWG5086 150000, APWG5086 180000, APWG5086 220000. 60 deg Copper bend with plain ends: APWG5360 280000, APWG5360 350000, APWG5360 420000, APWG5360 540000. 30 deg Copper bend with plain ends: APWG5330 280000, APWG5330 350000, APWG5330 420000, APWG5330 540000. 15 deg Copper bend with plain ends: APWG5315 280000, APWG5315 350000, APWG5315 420000, APWG5315 540000. 45 deg Copper bend with plain ends: APWG5345 280000, APWG5345 350000, APWG5345 420000, APWG5345 540000. Equal Tee: APWG5130 151515, APWG5130 181818, APWG5130 222222, APWG5130 282828, APWG5130 353535, APWG5130 424242, APWG5130 545454. Reduced Tee: APWG5130 152215, APWG5130 181515, APWG5130 181518, APWG5130 181815, APWG5130 281528, APWG5130 221222, APWG5130 181218, APWG5130 221515, APWG5130 221522, APWG5130 221822, APWG5130 222215, APWG5130 281828, APWG5130 282228, APWG5130 351535, APWG5130 352235, APWG5130 352835, APWG5130 421542, APWG5130 422242, APWG5130 422842, APWG5130 423542, APWG5130 542254, APWG5130 542854, APWG5130 543554, APWG5130 544254. Pipe Cross: APWG5901 181500, APWG5901 221500, APWG5901 281500. Fitting Reducer: APWG5243 181500, APWG5243 221500, APWG5243 221800, APWG5243 281500, APWG5243 281800, APWG5243 282200, APWG5243 352200, APWG5243 352800, APWG5243 422200, APWG5243 422800, APWG5243 423500, APWG5243 542800, APWG5243 543500, APWG5243 544200. Straight Coupler: APWG5270 150000, APWG5270 180000, APWG5270 220000, APWG5270 280000, APWG5270 350000, APWG5270 420000, APWG5270 540000. Reduced Coupler: APWG5240 221500. Cap: APWG5301 150000, APWG5301 180000, APWG5301 220000, APWG5301 280000, APWG5301 350000, APWG5301 420000, APWG5301 540000. Slip Coupler: APWG5270S150000, APWG5270S180000, APWG5270S220000, APWG5270S280000, APWG5270S350000, APWG5270S420000, APWG5270S540000.

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Range of indirect heat interface units (HIU) providing heating and instantaneous hot water. The central heating and hot water is generated via plate heat exchangers. Maximum operating pressure 10 bar (primary and DHW secondary). Maximum operating pressure 2.5 bar CH secondary Maximum operating temperature 90°C

Section:

1465 Heaters

Section Subtitle:

Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

241104709

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

22mm compression

Marking:

Bosch on front panel and technical info on adhesive label.

Installation Requirements:

R001 R140 R360

Expiry date:

30/11/2029

Model:

7-735-600-739 - Flow 8500 40, 7-735-600-740 - Flow 8500 40 H, 7-735-600-741 - Flow 8500 50, 7-735-600-742 - Flow 8500 50 H, 7-735-600-743 - Flow 8500 60, 7-735-600-744 - Flow 8500 60 H.

Approval Holder:

Bosch Thermotechnology Ltd.

Company Name

Bosch Thermotechnology Ltd.

Address

Danesmoor Works Pilsley Clay Cross Chesterfield Derbyshire

Postcode

S45 9BY

View All Listings by this Company

Jet range of water meters with brass blue epoxy coated bodies and EPDM rubber ‘O’-rings. Maximum working pressure16.0 bar. Maximum operating temperature 85°C.

Section:

1505 Water Meters

Size:

see model

Marking:

JET, WRAS and other technical info on dial.

Installation Requirements:

R001 R120

Expiry date:

31/12/2026

Model:

¾” BSP (M) 172033 JET NON PULSED COLD WATER METER 15 FTG 172035 JET PULSED COLD WATER METER 15 FTG 172041 JET PULSED HOT WATER METER 15 FTG 1” BSP (M) 172034 JET NON PULSED COLD WATER METER 20 FTG 172036 JET PULSED COLD WATER METER 20 FTG 172042 JET PULSED HOT WATER METER 20 FTG 1 ¼” BSP (M) 172037 JET PULSED COLD WATER METER 25 FTG 172043 JET PULSED HOT WATER METER 20 FTG 1 ½” BSP (M) 171038 JET PULSED COLD WATER METER 32 FTG 172044 JET PULSED COLD WATER METER 20 FTG 2” BSP (M) 172039 JET PULSED COLD WATER METER 32 FTG 172045 JET PULSED COLD WATER METER 20 FTG 2 ½” BSP (M) 172040 JET PULSED COLD WATER METER 32 FTG 172046 JET PULSED COLD WATER METER 20 FTG

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

Range of pressure transducers with stainless steel bodies. Maximum working pressure 10.0 Bar, 20 Bar or 40 Bar. Maximum operating temperature 99°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

9mm spigot for insertion into a quick release coupling or 1/4" BSP male.

Marking:

ABB, WRAS, Part number, Pressure range and technical info on adhesive label.

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

3KXF004496U0100 - 9mm spigot. 10 bar, 3KXF004496U0200 - 9mm spigot. 10 bar, 3KXF004496U0500 - 9mm spigot. 20 bar, 3KXF004496U0600 - 9mm spigot. 20 bar, 3KXF004496U0700 - 1/4" BSP male. 40 bar, 3KXF004496U0800 - 1/4" BSP male. 40 bar, 3KXF004496U0900 - 9mm spigot. 20 bar.

Approval Holder:

ABB Ltd.

Company Name

ABB Ltd.

Address

Oldends Lane, Stonehouse, Glos.

Postcode

GL10 3TA

View All Listings by this Company

Shower outlet kit, consisting of chromium plated ABS shower handset and PVC lined shower hose. The kit is also supplied with a riser rail and handset retainer. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

240903009

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F)

Marking:

BRISTAN on the Handset

Installation Requirements:

R001 R040

Expiry date:

30/09/2029

Model:

CAS KIT05 C KIT106 C HAND22 C HAND102 C 144364

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of overhead shower outlets with Various finishes. The inlets incorporate a stainless-steel strainer and flow regulator. Models 64400250CH, 67400250BBL, 63400250BBR, 68400250MB & 61400250BRZ Incorporates a shower arm.

Non-metallic materials and components comply with BS6920 at 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2310168

Note:

Open outlet use only.

Size:

½” BSP F ½” BSP M Stainless Steel Braided PEX lined hose ½” BSP captive nut

Marking:

JTP on connector

Installation Requirements:

R001 R040

Expiry date:

31/10/2028

Model:

IX200, 23200BBR, 27200BBL, 28200MB, 21200BRZ, IX250, 23250BBR, 27250BBL, 28250MB, 21250BRZ, IX300, 23300BBR, 27300BBL, 28300MB, 21300BRZ, 32250, 38250MB, 33250BBR, 37250BBL, 64400250CH, 67400250BBL, 63400250BBR, 68400250MB & 61400250BRZ

Approval Holder:

Just Taps Plus UK Ltd

Company Name

Just Taps Plus UK Ltd

Address

Innovia House, Marish Wharf, St Mary's Rd, Langley

Postcode

SL3 6DA

Country

Berkshire

Phone

01895 44 22 11

General Email

info@jtpuk.co.uk

View All Listings by this Company

Range shower outlets and accessories with brass bodies (various finishes). The inlet of the overhead shower outlet incorporates a stainless steel strainer. Maximum operating temperature 85°C. Open outlet use only.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

241015015

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F) or ½” BSP (M).

Marking:

ABI logo on body, or inlet connector or lateral surface of escutcheon.

Installation Requirements:

R001 R040

Expiry date:

31/10/2029

Model:

Shower Arms: Shower Dropper Round 300mm Brushed Brass: 16111 Brushed Copper: 16112 Brushed Gunmetal: 16113 Brushed Nickel: 16114 Chrome: 16197 Matte Black: 16115 White: 16116 Shower Arm 400mm Brushed Brass: 16105 Brushed Copper: 16106 Brushed Gunmetal: 16107 Brushed Nickel: 16108 Chrome: 16196 Matte Black: 16109 White: 16110 Eden Shower Arm Brushed Brass: 16072 Brushed Copper: 16073 Brushed Gunmetal: 16074 Brushed Nickel: 16075 Chrome: 16067 Matte Black: 16076 White: 16077 Adjustable Hand Shower Holder Brushed Brass: 16099 Brushed Copper: 16100 Brushed Gunmetal: 16101 Brushed Nickel: 16102 Chrome: 16195 Matte Black: 16103 White: 16104 Round Shower BP Brushed Brass: 16117 Brushed Copper: 16118 Brushed Gunmetal: 16119 Brushed Nickel: 16120 Chrome: 16960 Matte Black: 16121 White: 16449 Shower handsets: Rounded Rectangle Hand Shower Brushed Brass: 10376 Brushed Copper: 10833 Brushed Gunmetal: 10822 Brushed Nickel: 10431 Chrome: 10251 Matte Black: 10249 White: 11589 Overhead shower: Shower Head Round 250mm Brushed Brass: 10380 Brushed Copper: 10830 Brushed Gunmetal: 10710 Brushed Nickel: 10365 Chrome: 10428 Matte Black: 10173 White: 11587

Approval Holder:

ABI Interiors Pty. Ltd.

Company Name

ABI Interiors Pty. Ltd.

Address

3/128 Kortum Drive, Burleigh Heads, Gold Coast QLD, 4220

Country

Australia

View All Listings by this Company

Range of overhead shower outlets with brass or stainless-steel bodies (various finishes - see model), with NBR ‘O’-rings. The inlet incorporates a stainless-steel strainer.

Non-metallic materials and components comply with BS6920 at 70°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2306090

Note:

Open outlet use only.

Size:

½” BSP (F).

Marking:

JTP on connector

Installation Requirements:

R001 R040

Expiry date:

30/06/2028

Model:

IXGL200 (INOX STAINLESS STEEL ROUND SLIM GLIDE OVERHEAD SHOWER 200mm) IXGL300 (INOX STAINLESS STEEL ROUND SHOWERHEAD 300mm) GLR200 (GLIDE SLIM ROUND OVER HEAD SHOWER 200) GLR250 (GLIDE SLIM ROUND OVER HEAD SHOWER 250) GLR300 (GLIDE SLIM ROUND OVER HEAD SHOWER 300) GLR400 (GLIDE SLIM ROUND OVER HEAD SHOWER 400) GLS200 (GLIDE SLIM SQUARE OVERHEAD SHOWER 200 x 200) GLS250 (GLIDE SLIM SQUARE OVERHEAD SHOWER 250 x 250) GLS300 (GLIDE SLIM SQUARE OVERHEAD SHOWER 300 x 300) GLS400 (GLIDE SLIM SQUARE OVERHEAD SHOWER 400 x 400) 28200MB (VOS ROUND SHOWER HEAD 200MM MATT BLACK) 28250MB (VOS ROUND SHOWER HEAD 250MM MATT BLACK) 28300MB (VOS ROUND SHOWER HEAD 300MM MATT BLACK) L9901 (BOKER ROUND OVERHEAD SHOWER 200mm) 9201 (ROUND RAIN SHOWER 300mm) E044015 (ESPRITE OVERHEAD SHOWER 200mm) 38CM400MB (HIX CEILING MOUNTED400MM OVERHEAD SHOWER MATT BLACK) 33CM400BBR (HIX CEILING MOUNTED400MM OVERHEAD SHOWER BRUSHED BRASS) 37CM400BBL (HIX CEILING MOUNTED400MM OVERHEAD SHOWER BRUSHED BLACK)

Approval Holder:

Just Taps Plus UK Ltd

Company Name

Just Taps Plus UK Ltd

Address

Innovia House, Marish Wharf, St Mary's Rd, Langley

Postcode

SL3 6DA

Country

Berkshire

Phone

01895 44 22 11

General Email

info@jtpuk.co.uk

View All Listings by this Company

Range of shower handsets and connection hoses (brass bodies – various finishes). The inlet incorporates an approved check valve cartridge (with plastic flow regulator) however, the complete product has not been fully tested to demonstrate it provides backflow protection. Open outlet use only. Maximum operating temperature 60°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

241104033

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M) & ½” BSP (F) captive nut.

Marking:

THG on body

Installation Requirements:

R001 R040

Expiry date:

30/11/2029

Model:

60A/W 70/W 70R/W 71/W 66/W 67/W 60A/W Styles – BEYOND – G7A-Beaubourg ; G7B-Beaubourg à manettes ; G7C-Saint-Germain ; G7D-Saint-Germain à manettes ; A42-Pomme cristal clair satiné ; A46-Pomme cristal lustré or ; G6A-Métamorphose ; G6B-Métamorphose à manettes ; G6C-Métamorphose carbone ; G6D-Métamorphose céramique noire ; G6E-Métamorphose céramique blanche ; G7F-Bondi ; G7G-Bondi à manettes ; G9A-SYSTEM métal lisse ; G9B-SYSTEM métal lisse à manettes ; G9C-SYSTEM métal diamant ; G9D-SYSTEM métal diamant à manettes ; G9E-SYSTEM métal quadrillé ; G9F-SYSTEM métal quadrillé à manettes ; G9G-SYSTEM Howlite ; G9H-SYSTEM Howlite à manettes ; G9J-SYSTEM cristal ; G9K-SYSTEM cristal à manettes ; G9L-SYSTEM croisillon bague à définir ; G9M-SYSTEM manette bague à définir ; U6F-Beyond Crystal - cristal clair ; U6H-Beyond Crystal - cristal rouge ; U6J-Beyond Crystal - cristal couleur champagne ; U6K-Beyond Crystal - cristal bleu BROADWAY- A04-Broadway à manettes ; A52-Broadway CHARLESTON – G08-Pompadour ; G25-1900 ; G28-1900 à manettes ; G29-Charleston ; G3M-1900 à manettes métal lisse ; G3N-Charleston à manettes métal lisse ; G75-Charleston à manettes ; G7H-Club Saint-Germain ; G7J-Club Saint-Germain à manettes, XB7-Charleston Spirit ; XC5-La Minerva Roma CUBICA – A2R-Masque de Femme lunaire ; A2S-Masque de Femme solaire ; A2T-Masque de Femme, métal gravé ; A2U-Masque de Femme, métal lisse ; A38-Niagara ; A3Z-Marina Marbre à définir ; G04-Pure ; G1T-Beluga ; G1U-Beluga à manettes ; G79-Cubica ; U5E-Ginkgo ; U5F-Vegetal DIAMANT – A2A-Métropolis cristal clair ; A2B-Métropolis cristal clair à manettes ; A2L-Métropolis cristal noir ; A2M-Métropolis cristal noir à manettes; J17-Beverley ESTRELA – U3J-Estrela ; U3K-Estrela à manettes ; U3L-Estrela inserts métal LISSE – A41-Dahlia ; A7A-Ithaque décor Or ; A7B-Ithaque décor Platine ; A7F-Marquise noir décor Or ; A7G-Marquise blanc décor Platine ; G47-Vendôme ; G4R-Hamptons ; G4S-Hamptons à manettes ; U4E-Duomo ; U4F-Duomo cristal ; U5A-Flore NERVUREE – A1J-Amboise Malachite ; A1K-Amboise Lapis Lazuli ; A1L-Amboise Jaspe rouge ; A1M-Amboise Onyx noir ; A1S-Cheverny Malachite ; A1T-Cheverny Lapis Lazuli ; A1U-Cheverny Jaspe rouge ; U5G-Moon Dragon ; U5H-Jade Dragon ; A1V-Sully Malachite ; A1W-Sully Lapis Lazuli ; A2C-Océania ; A2E-Venice ; A2F-Naïade ; A2G-Ange ; A2H-Panthère cristal clair ; A2J-Papillon ; A2K-Panthère cristal noir ; A3T-Amboise Marbre à définir ; A3V-Cheverny Marbre à définir ; A44-Ellipse ; A8L-Vogue marbre à définir ; A8M-Vogue Malachite ; A8N-Vogue Jaspe rouge ; A8P-Vogue Onyx noir ; A8R-Vogue Oeil de tigre ; A8S-Vogue Lapis Lazuli ; A9B-Jaipur cristal satiné ; A9C-Jaipur Onyx noir ; A9E-Jaipur marbre à définir ; A9F-Jaipur métal ; E53-Najem ; G14-Versailles ; G24-Amour de Trianon ; G31-Cygne ; U1A-Mandarine métal ; U1D-Mandarine cristal clair ; U1E-Mandarine cristal clair satiné ; U1K-Mandarine Cristallia Diamant ; U1S-Sully Onyx blanc ; U1T-Sully Onyx noir ; U1V-Cheverny Onyx noir ; U5D-Sun Dragon ; U5G-Moon Dragon ; U5H-Jade Dragon ; U5J-Rose ; U7A-Trocadéro Malachite ; U7B-Trocadéro Lapis Lazuli ; U7C-Trocadéro Jaspe Rouge ; U7D-Trocadéro Onyx noir ; U7E-Trocadéro Oeil de Tigre ; U8B-Monte Carlo porcelaine or ; U8C-Monte Carlo porcelaine or blanc ; U93-Malmaison métal ; U95-Malmaison Portoro PINTO – D5A-Andy ; G33-Gao ; G3R-Montaigne marbre Grand Antique ; G3S-Montaigne marbre Grand Antique à manettes ; G3T-Montaigne marbre Leonardo Grey ; G3U-Montaigne marbre Leonardo Grey à manettes ; G3V-Montaigne marbre blanc Vénus ; G3W-Montaigne marbre blanc Vénus à manettes ; G4P-Collection "O" ; G5A-Nano ; G5B-Nano à manettes ; G5D-Anoa ; G6G-New Spirit ; G6H-New Spirit à manettes ; G7E-Dean ; G7R-Yoko ; G7S-Yoko Color ; G7T-Yoko Ice ; G7U-Yoko Howlite ; G7V-Yoko Delta ; G7W-Yoko Delta Howlite ; T4P-Collection "O" Sélection ME ; U2A-Le 11 ; U2B-Le 11 à manettes ; U7G-Icon X ; U7H-Icon X à manettes ; U7J-Icon X insert métal ; U7K-Icon X à manettes insert métal ; U7L-Icon X Titane ; U7M-Icon X à manettes Titane ; U7S-Icon X Carbone or ; U7T-Icon X à manettes Carbone SO – G5E-Soho ; G7K-Soho 2023 ; G7L-SOHO METAL (nouveau design) TURBOJET – A55-Art Déco à manettes ; A56-Art Déco Cristal ; A57-Tradition ; A58-Tradition à manettes ; A59-Tradition Cristal ; G00-Tous styles YOKO – A2N-Mossi cristal clair ; A33-Bambou cristal noir ; A34-Bambou cristal Ambre ; A35-Bambou cristal clair ; A4J-Hirondelle cristal clair ; A4K-Hirondelle cristal clair décor platine ; A4L-Hirondelle cristal clair décor or ; A6A-Profil métal ; A6B-Profil métal à manettes ; A6G-Profil Lalique cristal clair ; A6H-Profil Lalique cristal clair à manettes ; A6N-Profil Onyx noir ; A6P-Profil Onyx noir à manettes ; G2H-Le 9 Howlite ; G2I-Le 9 Nero Marquina ; G2J-Faubourg porcelaine blanche à manettes ; G2K-Faubourg porcelaine blanche ; G2L-Faubourg porcelaine noire ; G2M-Faubourg porcelaine noire à manettes ; G2N-Froufrou ; G2P-Froufrou à manettes ; G2R-Frivole ; G2S-Frivole à manettes ; G2T-Faubourg métal ; G2U-Faubourg métal à manettes ; G58-Spirit à manettes ; G69-Spirit ; G7F-Bondi ; G7G-Bondi à manettes ; G8A-Les Ondes ; G8B-Les Ondes à manettes ; G9A-SYSTEM métal lisse ; G9B-SYSTEM métal lisse à manettes ; G9C-SYSTEM métal diamant ; G9D-SYSTEM métal diamant à manettes ; G9E-SYSTEM métal quadrillé ; G9F-SYSTEM métal quadrillé à manettes ; G9G-SYSTEM Howlite ; G9H-SYSTEM Howlite à manettes ; G9J-SYSTEM cristal ; G9K-SYSTEM cristal à manettes ; U2D-INFINI porcelaine blanche ; U2E-INFINI porcelaine blanche décor platine ; U2F-INFINI porcelaine blanche décor or ; U2L-Nihal porcelaine bleue ; U2M-Nihal métal lisse ; U2N-Nihal porcelaine ivoire ; U2P-Nihal porcelaine noire ; U2R-Nihal porcelaine verte ; U2S-Nihal Porcelaine rouge ; U4A-Diplomate bagues lisses ; U4B-Diplomate bagues annelées ; U4C-Diplomate bagues torsadées ; U4D-Diplomate Royale ; U5B-Island ; U5C-Paradise ; U5K-Camélia Cristal noir ; U5L-Camélia Cristal clair ; U5N-New Island ; U5P-New Paradise ; U6A-Pétale de Cristal clair ; U6B-Pétale de Cristal bleu ; U6C-Pétale de Cristal rouge ; U6D-Pétale de Cristal noir ; U6E-Pétale de Cristal clair liseré doré ; U6M-Mille nuits Cristal clair ; U6N-Mille nuits Cristal couleur Champagne ; U6P-Mille nuits Cristal Brume ; U8D-Corvair ; U8E-Corvair à manettes ; U8F-Corvair marbre Howlite ; U8G-Corvair à manettes marbre Howlite ; U8H-Corvair marbre Portoro ; U8J-Corvair à manettes marbre Portoro ; U8K-Corvair marbre Fior di Bosco ; U8L-Corvair à manettes marbre Fior di Bosco ; U8M-Corvair pierre à définir ; U8N-Corvair à manettes pierre à définir ; XB4-Ritz Picnic ; XC4-Spa Dior Marbre à définir ZOOM – U4J-ZOOM Five ; U4K-ZOOM Seven ; U4L-ZOOM Twelve Finishes: A02-Polished Chrome ; A13-Smoked Brass ; B01-Polished Nickel ; C01-Matte Nickel ; C02-Matte Chrome ; C27-Unlacquered Brass ; C47-Smoked Nickel ; D01-Light Bronze Lacquered ; D05-Lacquered Matte Bronze ; D10-USA Oil-Rubbed Bronze ; D12-Polished Brass Lacquered ; D15-Polished Black Lacquered ; D16-White Lacquered ; D18-Matte Black lacquered ; D21-Old Oil-Rubbed Bronze ; D24-Aranja ; H17-Matt Aranja ; F01-Polished Gold ; F07-Matte Gold ; F18-Rhodium Silver ; F19-Matt Rhodium Silver ; F27-Rose Gold ; F30-Soft Gold ; F31-Matte Soft Gold ; F33-Brown Bronze PVD ; F34-Matte Brown Bronze PVD ; G01-Polished Nickel/Polished Gold ; A complete code number compile three information’s, for example: A1J-A02-60A/W (SERIE-FINISH-ARTICLE). This would give you a stylish ledge mounted hand shower with 2m hose and corner bracket in Amboise Malachite style and polished chrome finish.

Manufacturer:

THG Paris

Company Name

THG Paris

Address

35 rue Tournière Béthencourt sur Mer

Postcode

80130

Country

France

Phone

+33 3.22.60.20.80

View All Listings by this Company

Range of black HDPE Pipe SDR 11 manufactured to ISO 4427 / DIN 8074 / EN12201. Maximum working pressure: 16 Bar. Maximum operating temperature: Cold water use only.

Section:

1840 Tubes

Section Subtitle:

Plastic, cold-water use.

WRAS Approval Number:

241002705

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Pipe only approval. The pipes have not been tested for their compatibility with any fittings.

Size:

20mm, 25mm, 32mm, 40mm, 50mm, 63mm, 75mm, 90mm, 110mm, 125mm, 140mm, 160mm, 200mm, 225mm, 250mm OD.

Marking:

Flo Bahrain pipes logo, PE, Size, standard and date of manufacture (YY/DD/MM) on body.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

PE-Ultra FLO.

Manufacturer:

Bahrain Pipes BSC

Company Name

Bahrain Pipes BSC

Address

Buldg.715, Rd.228, Salmabad 702 P.O.Box 530, Manama

Country

Bahrain

View All Listings by this Company