Range of bath fillers, waste and overflow assemblies (chromium plated brass and plastic body), incorporating a click type pop-up waste. The inlet of model 58 129 003 Hansgrohe Exafill incorporates an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar.

Non-metallic materials and components comply with BS6920 at 65°C

Section:

0681 Combination Tap Assemblies

Section Subtitle:

Miscellaneous.

WRAS Approval Number:

2310052

Size:

¾” BSP (M)

Marking:

Hansgrohe on faceplate

Installation Requirements:

R001 R576

Expiry date:

31/10/2028

Model:

58 113 xx0 Hansgrohe Exafill S Complete set bath filler, waste and overflow set for standard bathtubs 58 117 xx0 Hansgrohe Exafill S Finish set bath filler, waste and overflow set 58 129 003 Hansgrohe Exafill Bathtub filler and push-open waste set 58 115 180 Hansgrohe Exafill S Basic set bath filler, waste and overflow set for standard bathtubs 58 116 180 Hansgrohe Exafill S Basic set bath filler, waste and overflow set for special bathtubs Where xx0 denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish

Product Images

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Range of wall-mounted spout outlet consisting of a brass body with various finishes, plastic aerator and EPDM ‘O’ rings. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:

0682 Combination Tap Assemblies

Section Subtitle:

Spout outlet(s).

WRAS Approval Number:

2310333

Size:

½” BSP(M),

Marking:

Dornbracht on body.

Installation Requirements:

R001 R040

Expiry date:

31/10/2028

Model:

13801831-00 - YAMOU Wall-mounted bath spout – Chrome, 13801831-69 - YAMOU Wall-mounted bath spout – Black, 13801832-00 - YARRE Wall-mounted bath spout – Chrome, 13801832-69 - YARRE Wall-mounted bath spout – Black.

Product Images

Approval Holder:

Dornbracht GmbH & Co. KG.

Company Name

Dornbracht GmbH & Co. KG.

Address

Koebbingser Muehle 6 Iserlohn

Postcode

D-58640

Country

Germany

Phone

+49 2371 433 0

General Email

wpape@dornbracht.com

View All Listings by this Company

Range of expansion vessels with epoxy coated steel bodies and EPDM diaphragms. Maximum working pressure 8.0 or 10.0 bar (please refer to model). Maximum operating temperature 70°C or 100°C (please refer to model).

Section:

1000 Expansion Vessels

WRAS Approval Number:

2310098

Note:

Expansion vessels should be installed in the vertical orientation and located so as to minimise the length of any connecting pipework.

Size:

2” or 2 ½” BSP (F)

Marking:

Cimm logo, model, pressure, capacity and other technical information on adhesive label on body.

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

Maximum working pressure 10.0 bar. Maximum operating temperature 100°C: AFE 750, AFE 1000 & AFE 1500. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C: AFE CE 750, AFE CE 1000 & AFE CE 1500. Maximum working pressure 8.0 bar. Maximum operating temperature 100°C: AFE CE 750 D.750.

Product Images

Approval Holder:

CIMM SpA

Company Name

CIMM SpA

Address

Via Caprera, 13 Castello di Godego (TV)

Postcode

31030

Country

Italy

Phone

0039 0423 760009

General Email

info@cimmspa.com

View All Listings by this Company

Manufacturer:

CIMM SpA

Company Name

CIMM SpA

Address

Via Caprera, 13 Castello di Godego (TV)

Postcode

31030

Country

Italy

Phone

0039 0423 760009

General Email

info@cimmspa.com

View All Listings by this Company

Filling loop assembly comprising of a spherical valve, stainless-steel braided EPDM lined flexible hose and a double check valve assembly ((suitable for backflow protection against fluid category 3) which incorporates a lever operated spherical valve. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1015 Filling Loop

Size:

15mm compression inlet/outlet

Marking:

Fanski logo, WRAS and year of manufacture (YYYY) on hose ferrule. Flow arrow, Size and DR on check valve body.

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

B0301-148039-000

Product Images

Approval Holder:

Fanski Group Inc.

Company Name

Fanski Group Inc.

Address

NO.7 Shengyuan Road Yucheng Street, Yuhuan City, Zhejiang

Postcode

317600

Country

China

View All Listings by this Company

Manufacturer:

Fanski Group Inc.

Company Name

Fanski Group Inc.

Address

NO.7 Shengyuan Road Yucheng Street, Yuhuan City, Zhejiang

Postcode

317600

Country

China

View All Listings by this Company

Filling loop assemblies comprising of a stainless steel braided, EPDM lined hose, double check valve assembly with isolation valve verified by test (suitable for backflow protection against fluid category 3) and either a straight or tee isolation valve. Maximum working pressure 10.0 bar. Maximum operating temperature 85ºC.

Section:

1015 Filling Loop

Size:

15mm compression inlet/outlet

Marking:

Tenby, WRAS, date of manufacture (YYYY) on flexible hose, CR and flow arrow on double check valve assembly.

Installation Requirements:

R001

Expiry date:

31/03/2027

Model:

AX-SS-06-01 straight isolation valve AX-SS-06-02 tee isolation valve

Approval Holder:

Tenby Imports & Exports Ltd.

Company Name

Tenby Imports & Exports Ltd.

Address

Unit 1 Crown House, Otterspool Way, Watford, Hertfordshire

Postcode

WD25 8HL

View All Listings by this Company

Range of in-line water filters with polypropylene bodies. Maximum working pressure 8.5 bar. Cold water use only.

Non-metallic materials and components comply with BS6920 at cold water use only°C

Section:

1050 Filters and Housings

WRAS Approval Number:

2305086

Note:

IRN R290 applies to models with the scale inhibitor function The push-fit fittings are for use with use with John Guest LLDPE tubing (not included on the approval).

Size:

Refer to models

Marking:

BWT, pressure & temp on adhesive label on body.

Installation Requirements:

R001 R008 R150 R170 R290

Expiry date:

31/05/2028

Model:

Carbon Block models: NCILC 10” 1 micron: ¼” push fit Carbon Block/Scale Inhibitor models: NCILH 10” 1 micron: ¼” push fit

Approval Holder:

BWT Holding GmbH

Company Name

BWT Holding GmbH

Address

Walter-Simmer-Straße 4 Mondsee

Postcode

5310

Country

Austria

Phone

+436648172152

General Email

andreas.stiegler@aidu.solutions

View All Listings by this Company

Range on inline filter cartridges incorporating plastic bodies. The filter media varies between models and includes active carbon, silver impregnated active carbon, silver carbon block & weak/strong cationic resin. Maximum working pressure 6.0 bar. Cold water use only.

Section:

1055 Filter Cartridges

Size:

See model

Marking:

ZIP and other technical information on body. Flow arrow on head unit.

Installation Requirements:

R001 R008 R120 R170 R290

Expiry date:

31/01/2026

Model:

33.65mm OD: 95600 ZIP LIMESCALE FILTER FOR HOME LIGHT USE 95601 ZIP LIMESCALE FILTER FOR HOME 95602 ZIP LIMESCALE FILTER FOR WORK LIGHT USE 3/8” BSP (M): 95603 ZIP LIMESCALE FILTER FOR WORK 3.0, 95604 ZIP LIMESCALE FILTER FOR WORK HIGH USE4.5, 95605 ZIP LIMESCALE FILTER FOR WORK HEAVY USE 6.0.

Approval Holder:

Zip Heaters UK Ltd T/A Zip Water UK

Company Name

Zip Heaters UK Ltd T/A Zip Water UK

Address

Trafalgar House, Trafalgar Business Park, Dereham

Postcode

NR19 1JG

Country

United Kingdom

Phone

0345 600 5005

General Email

sebastian.ducker@zipwater.co.uk

View All Listings by this Company

Range of JG Twist & Lock Speedfit push-fit fittings for use with JG Speedfit Layflat Polybutylene Barrier Pipe (BPB Pipe to BS EN 7291-2:2010), 'BPEX' Barrier Pipe.(BPEX Pipe to BS EN 7291-3:2010) and Copper Pipe to BS EN1057:2006 Max working pressure & operating temperature: 12.5 Bar at 20°C 6.0 Bar at 83°C

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2310020

Size:

See models, note all sizes listed in mm are push-fit, all other size types are listed in the models themselves. Models for use with copper pipe are sized up to and including 22mm and no larger.

Marking:

Fittings: JG Logo & Size on collet. Manifolds: JG Logo & Size on Collet. JG Logo on Body. Pipe: JG Speedfit, operating parameters & other technical information on pipe.

Installation Requirements:

R001 R008

Expiry date:

31/10/2028

Model:

EQUAL STRAIGHT CONNECTOR PEM0410W, 10mm EQUAL STRAIGHT CONNECTOR PEM0415W, 15mm EQUAL STRAIGHT CONNECTOR PEM0422W, 22mm EQUAL STRAIGHT CONNECTOR PEM0428W, 28mm EQUAL STRAIGHT CONNECTOR REDUCING STRAIGHT CONNECTOR PEM201510W, 15mm x 10mm REDUCING STRAIGHT CONNECTOR PEM202215W, 22mm x 15mm REDUCING STRAIGHT CONNECTOR REDUCER PEM061510W, 15mm x 10mm REDUCER PEM062215W, 22mm x 15mm REDUCER PEM062815W, 28mm x 15mm REDUCER PEM062822W, 28mm x 22mm REDUCER, EQUAL ELBOW PEM0310W, 10mm EQUAL ELBOW, PEM0315W, 15mm EQUAL ELBOW, PEM0322W, 22mm EQUAL ELBOW, PEM0328W, 28mm EQUAL ELBOW, REDUCING ELBOW PEM211510W, 15mm x10mm REDUCING ELBOW PEM212215W, 22mm x15mm REDUCING ELBOW STEM ELBOW PEM571515W, 15mm 135° STEM ELBOW, PEM572222W, 22mm 135° STEM ELBOW, STEM ELBOW PEM221010W, 10mm x 10mm STEM ELBOW PEM221015W, 10mm x 15mm STEM ELBOW PEM221515W, 15mm x 15mm STEM ELBOW PEM222222W, 22mm x 22mm STEM ELBOW EQUAL TEE PEM0210W, 10mm EQUAL TEE PEM0215W, 15mm EQUAL TEE PEM0222W, 22mm EQUAL TEE PEM0228W, 28mm EQUAL TEE REDUCING TEE PEM3015BW, 15mm x 10mm x 10mm REDUCING TEE PEM3015AW, 15mm x 15mm x 10mm REDUCING TEE PEM3022CW, 15mm x 15mm x 22mm REDUCING TEE PEM3022BW, 22mm x 15mm x 15mm REDUCING TEE PEM3022DW, 22mm x 15mm x 22mm REDUCING TEE PEM302210AW, 22mm x 22mm x 10mm REDUCING TEE PEM3022AW, 22mm x 22mm x 15mm REDUCING TEE PEM3028BW, 28mm x 22mm x 22mm REDUCING TEE PEM3028DW, 28mm x 22mm x 28mm REDUCING TEE PEM302810AW, 28mm x 28mm x 10mm REDUCING TEE PEM302815AW, 28mm x 28mm x 15mm REDUCING TEE PEM3028AW, 28mm x 28mm x 22mm REDUCING TEE STEM TEE PEM532210W, 22mm x 22mm x 10mm STEM TEE PEM532215W, 22mm x 22mm x 15mm STEM TEE STRAIGHT TAP CONNECTOR, PEMSTC1014, 10mm x 1/2" BSP Captive Nut STRAIGHT TAP CONNECTOR PEMSTC1514, 15mm x 1/2" BSP Captive Nut STRAIGHT TAP CONNECTOR PEMSTC1516, 15mm x 3/4" BSP Captive Nut STRAIGHT TAP CONNECTOR PEMSTC2216, 22mm x 3/4" BSP Captive Nut STRAIGHT TAP CONNECTOR BENT TAP CONNECTOR PEMBTC1014, 10mm x 1/2" BSP Captive Nut BENT TAP CONNECTOR PEMBTC1514, 15mm x 1/2" BSP Captive Nut BENT TAP CONNECTOR

PIPE REPAIR KIT, 15RKP, 15mm PIPE REPAIR KIT 22RKP, 22mm PIPE REPAIR KIT SLIP TEE CONNECTOR 15TKP, 15mm SLIP TEE CONNECTOR 22TKP, 22mm SLIP TEE CONNECTOR, PLUG PL10, 10mm PLUG, PL15, 15mm PLUG, PL22, 22mm PLUG, PL28, 28mm PLUG, PIPE INSERTS TSM10N, 10mm PIPE INSERTS TSM15N, 15mm PIPE INSERTS TSM22N, 22mm PIPE INSERTS TSM28N, 28mm PIPE INSERTS SUPERSEAL PIPE INSERTS STS10, 10mm SUPERSEAL PIPE INSERTS STS15, 15mm SUPERSEAL PIPE INSERTS STS22, 22mm SUPERSEAL PIPE INSERTS STS28, 28mm SUPERSEAL PIPE INSERTS LAYFLAT POLYBUTYLENE BARRIER PIPE (COILS) 10BPB-25C, 10mm x 25M LAYFLAT POLYBUTYLENE BARRIER PIPE 10BPB-50C, 10mm x 50M LAYFLAT POLYBUTYLENE BARRIER PIPE 10BPB-100C, 10mm x 100M LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-25C, 15mm x 25M LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-50C, 15mm x 50M LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-85C, 15mm x 85M LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-100C, 15mm x 100M LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-120C, 15mm x 120M LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-150C, 15mm x 150M LAYFLAT POLYBUTYLENE BARRIER PIPE 15BPB-300C, 15mm x 300M LAYFLAT POLYBUTYLENE BARRIER PIPE 22BPB-25C 22mm x 25M LAYFLAT POLYBUTYLENE BARRIER PIPE 22BPB-50C 22mm x 50M LAYFLAT POLYBUTYLENE BARRIER PIPE 28BPB-50C, 28mm x 50M LAYFLAT POLYBUTYLENE BARRIER PIPE WHITE PEX BARRIER PIPE (COILS & LENGTHS) 10BPEX-25C, 10mm x 25M WHITE PEX BARRIER PIPE 10BPEX-50C, 10mm x 50M WHITE PEX BARRIER PIPE 10BPEX-100C, 10mm x 100M WHITE PEX BARRIER PIPE 15BPEX-25C, 15mm x 25M WHITE PEX BARRIER PIPE 15BPEX-50C, 15mm x 50M WHITE PEX BARRIER PIPE 15BPEX-100C, 15mm x 100M WHITE PEX BARRIER PIPE 15BPEX-120C, 15mm x 120M WHITE PEX BARRIER PIPE 15BPEX-150C, 15mm x 150M WHITE PEX BARRIER PIPE 22BPEX-25C, 22mm x 25M WHITE PEX BARRIER PIPE 22BPEX-50C, 22mm x 50M WHITE PEX BARRIER PIPE 15BPEX-20X2L, 15mm x 2M LENGTHS WHITE PEX BARRIER PIPE 15BPEX-20X3L, 15mm x 3M LENGTHS WHITE PEX BARRIER PIPE 15BPEX-20X6L, 15mm x 6M LENGTHS WHITE PEX BARRIER PIPE 22BPEX-20X2L, 22mm x 2M LENGTHS WHITE PEX BARRIER PIPE 22BPEX-20X3L, 22mm x 3M LENGTHS WHITE PEX BARRIER PIPE 22BPEX-20X6L, 22mm x 6M LENGTHS WHITE PEX BARRIER PIPE 28BPEX-10X3L, 28mm x 3M LENGTHS WHITE PEX BARRIER PIPE 28BPEX-10X6L, 28mm x 6M LENGTHS WHITE PEX BARRIER PIPE Manifolds: PEM522210W 22MM X 10MM 4 PORT MANIFOLD PEM522210WP 22MM X 10MM 4 PORT MANIFOLD PEM522215W 22MM X 15MM 4 PORT MANIFOLD PEM522215WP 22MM X 15MM 4 PORT MANIFOLD PEM582210AW 22MM X 10MM 2 PORT MANIFOLD W/ STEM PEM582210AWP 22MM X 10MM 2 PORT MANIFOLD W/ STEM PEM582215AW 22MM X 15MM 2 PORT MANIFOLD W/ STEM PEM582215AWP 22MM X 15MM 2 PORT MANIFOLD W/ STEM PEM582215BW 22MM X 15MM 3 PORT MANIFOLD W/ STEM PEM582215BWP 22MM X 15MM 3 PORT MANIFOLD W/ STEM PEM582215CW 22MM X 15MM 4 PORT MANIFOLD W/ STEM PEM582215CWP 22MM X 15MM 4 PORT MANIFOLD W/ STEM

Product Images

Approval Holder:

Reliance Worldwide Corporation

Company Name

Reliance Worldwide Corporation

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Manufacturer:

Reliance Worldwide Corporation

Company Name

Reliance Worldwide Corporation

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

‘Atlas’ range of green fusion welded polypropylene fittings for use with ‘Atlas’ PPRGF or PPR pipes. Maximum working pressure 20.0 bar. Cold water use only.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2310089

Size:

Please refer to models.

Marking:

Atlas UAE logo & product information on body of fittings. Modern Plastic Industry, Atlas & technical information on pipe.

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

APE90XX = ELBOW 90° XX mm APE9020 = ELBOW 90° 20 MM APE9025 = ELBOW 90° 25 MM APE9032 = ELBOW 90° 32 MM APE9040 = ELBOW 90° 40 MM APE9050 = ELBOW 90° 50 MM APE9063 = ELBOW 90° 63 MM APE9075 = ELBOW 90° 75 MM APE9090 = ELBOW 90° 90 MM APE90110 = ELBOW 90° 110 MM APE45XX = ELBOW 45° XX mm APE4520 = ELBOW 45° 20 MM APE4525 = ELBOW 45° 25 MM APE4532 = ELBOW 45° 32 MM APE4540 = ELBOW 45° 40 MM APE4550 = ELBOW 45° 50 MM APE4563 = ELBOW 45° 63 MM APE4575 = ELBOW 45° 75 MM APE4590 = ELBOW 45° 90 MM APE45110 = ELBOW 45° 110 MM APTXX = TEE XX mm APT20 = TEE 20 MM APT25 = TEE 25 MM APT32 = TEE 32 MM APT40 = TEE 40 MM APT50 = TEE 50 MM APT63 = TEE 63 MM APT75 = TEE 75 MM APT90 = TEE 90 MM APT110 = TEE 110 MM APSXX = SOCKET XX mm APS20 = SOCKET 20 MM APS25 = SOCKET 25 MM APS32 = SOCKET 32 MM APS40 = SOCKET 40 MM APS50 = SOCKET 50 MM APS63 = SOCKET 63 MM APS75 = SOCKET 75 MM APS90 = SOCKET 90 MM APS110 = SOCKET 110 MM APECXX = END CAP XX mm APEC20 = END CAP 20 MM APEC25 = END CAP 25 MM APEC32 = END CAP 32 MM APEC40 = END CAP 40 MM APEC50 = END CAP 50 MM APEC63 = END CAP 63 MM APEC75 = END CAP 75 MM APEC90 = END CAP 90 MM APEC110 = END CAP 110 MM APRTXXxXXxXX = REDUCING TEE XXxXXxXX mm APRT20X25X20 = REDUCING TEE 20X25X20 MM APRT25X20X20 = REDUCING TEE 25X20X20 MM APRTXXxXX = Reducing Tee XXxXXxXX mm APRT25X20 = REDUCING TEE 25X20X25 MM APRT32X20 = REDUCING TEE 32X20X32 MM APRT25X32 = REDUCING TEE 32X25X25 MM APRT32X25 = REDUCING TEE 32X25X32 MM APRT40X20 = REDUCING TEE 40X20X40 MM APRT40X25 = REDUCING TEE 40X25X40 MM APRT40X32 = REDUCING TEE 40X32X40 MM APRT50X20 = REDUCING TEE 50X20X50 MM APRT50X25 = REDUCING TEE 50X25X50 MM APRT50X32 = REDUCING TEE 50X32X50 MM APRT50X40 = REDUCING TEE 50X40X50 MM APRT63X20 = REDUCING TEE 63X20X63 MM APRT63X25 = REDUCING TEE 63X25X63 MM APRT63X32 = REDUCING TEE 63X32X63 MM APRT63X40 = REDUCING TEE 63X40X63 MM APRT63X50 = REDUCING TEE 63X50X63 MM APRT75X32 = REDUCING TEE 75X32X75 MM APRT75X40 = REDUCING TEE 75X40X75 MM APRT75X50 = REDUCING TEE 75X50X75 MM APRT75X63 = REDUCING TEE 75X63X75 MM APRT90X40 = REDUCING TEE 90X40X90 MM APRT90X50 = REDUCING TEE 90X50X90 MM APRT90X63 = REDUCING TEE 90X63X90 MM APRT90X75 = REDUCING TEE 90X75X90 MM APRT110X63 = REDUCING TEE 110X63X110 MM APRT110X75 = REDUCING TEE 110X75X110 MM APRT110X90 = REDUCING TEE 110X90X110 MM APRXXxXX = REDUCER XXxXX mm APR25X20 = REDUCER 25X20 MM APR32X20 = REDUCER 32X20 MM APR32X25 = REDUCER 32X25 MM APR40X20 = REDUCER 40X20 MM APR40X25 = REDUCER 40X25 MM APR40X32 = REDUCER 40X32 MM APR50X20 = REDUCER 50X20 MM APR50X25 = REDUCER 50X25 MM APR50X32 = REDUCER 50X32 MM APR50X40 = REDUCER 50X40 MM APR63X20 = REDUCER 63X20 MM APR63X25 = REDUCER 63X25 MM APR63X32 = REDUCER 63X32 MM APR63X40 = REDUCER 63X40 MM APR63X50 = REDUCER 63X50 MM APR75X40 = REDUCER 75X40 MM APR75X50 = REDUCER 75X50 MM APR75X63 = REDUCER 75X63 MM APR90X50 = REDUCER 90X50 MM APR90X63 = REDUCER 90X63 MM APR90X75 = REDUCER 90X75 MM APR110X63 = REDUCER 110X63 MM APR110X75 = REDUCER 110X75MM APR110X90 = REDUCER 110X90 MM APEPXX = END PLUG XX” BSP (M) APEP0.5 = END PLUG 1/2" APEP0.75 = END PLUG 3/4" APEP1 = END PLUG 1" APCTXX = CROSS TEE XX mm APCT20 = CROSS TEE 20 MM APCT25 = CROSS TEE 25 MM APCT32 = CROSS TEE 32 MM PUSXX = UNION STUB XX mm PUS20 = UNION STUB 20MM PUS25 = UNION STUB 25MM PUS32 = UNION STUB 32MM PUS40 = UNION STUB 40MM PUS50 = UNION STUB 50MM PUS63 = UNION STUB 63MM APPBXX = PIPE BRACKET XX mm APPB20 = PIPE BRACKET 20 MM APPB25 = PIPE BRACKET 25 MM APPB32 = PIPE BRACKET 32 MM APCOSXX = CROSS OVER XX mm APCOS20 = CROSS OVER 20 MM APCOS25 = CROSS OVER 25 MM APCOS32 = CROSS OVER 32 MM APUXX = PLASTIC UNION XX mm APU20 = PLASTIC UNION 20 MM APU25 = PLASTIC UNION 25 MM APU32 = PLASTIC UNION 32 MM APCOXX = CROSS OVER SMALL XX mm APCO20 = CROSS OVER SMALL 20 MM APCO25 = CROSS OVER SMALL 25 MM APCO32 = CROSS OVER SMALL 32 MM APSTXX = FLANGE STUB XX mm APST63 = FLANGE STUB 63 MM APST75 = FLANGE STUB 75 MM APST90 = FLANGE STUB 90 MM APST110 = FLANGE STUB 110 MM APEPLXX = END PLUG LONG XX” BSP (M) APEPL0.5 = END PLUG LONG ½'' APEPL0.75 = END PLUG LONG ¾'' APFTXXxXX = FEM. TEE TRANSITION XXmm x XX” BSP (F) APFT20X0.5 = FEM. TEE TRANSITION 20X1/2" BSP APFT20X0.75 = FEM. TEE TRANSITION 20X3/4" BSP APFT25X0.5 = FEM. TEE TRANSITION 25X1/2" BSP APFT25X0.75 = FEM. TEE TRANSITION 25X3/4" BSP APFT32X0.5 = FEM. TEE TRANSITION 32X1/2" BSP APFT32X0.75 = FEM. TEE TRANSITION 32X3/4" BSP APFT32X1 = FEM. TEE TRANSITION 32X1" BSP APFE20X0.5 = FEM. ELBOW TRANSITION 20X1/2" BSP APFE20X0.75 = FEM. ELBOW TRANSITION 20X3/4" BSP APFE25X0.5 = FEM. ELBOW TRANSITION 25X1/2" BSP APFE25X0.75 = FEM. ELBOW TRANSITION 25X3/4" BSP APFE32X0.5 = FEM. ELBOW TRANSITION 32X1/2" BSP APFE32X0.75 = FEM. ELBOW TRANSITION 32X3/4" BSP APFE32X1 = FEM. ELBOW TRANSITION 32X1" BSP APFSXXxXX = FEM. SOCKET TRANSITION XXmm x XX” BSP (F) APFS20X0.5 = FEM. SOCKET TRANSITION 20X1/2" BSP APFS20X0.75 = FEM. SOCKET TRANSITION 20X3/4" BSP APFS25X0.5 = FEM. SOCKET TRANSITION 25X1/2' BSP APFS25X0.75 = FEM. SOCKET TRANSITION 25X3/4" BSP APFS32X0.5 = FEM. SOCKET TRANSITION 32X1/2" BSP APFS32X0.75 = FEM. SOCKET TRANSITION 32X3/4" BSP APFHSXXxX = FEM. HEX SOCKET TRANSITION XXmm x XX BSP (F) APFHS32X1 = FEM. HEX SOCKET TRANSITION 32X1" BSP APFHS40X1 = FEM. HEX SOCKET TRANSITION 40X1" BSP APFHS40X1.25 = FEM. HEX SOCKET TRANSITION 40X11/4" BSP APFHS50X1.5 = FEM. HEX SOCKET TRANSITION 50X11/2" BSP APFHS63X2 = FEM. HEX SOCKET TRANSITION 63X2" BSP APFHS75X2.5 = FEM. HEX SOCKET TRANSITION 75X21/2" BSP APFHS90X3 = FEM. HEX SOCKET TRANSITION 90X3" BSP APFHS110X4 = FEMALE HEX SOCKET TRANSITION 110X4'' APMSXXxXX = MALE SOCKET TRANSITION XXmm x XX BSP (M) APMS20X0.5 = MALE SOCKET TRANSITION 20X1/2" APMS20X0.75 = MALE SOCKET TRANSITION 20X3/4" APMS25X0.5 = MALE SOCKET TRANSITION 25X1/2" APMS25X0.75 = MALE SOCKET TRANSITION 25X3/4" APMS32X0.5 = MALE SOCKET TRANSITION 32X1/2'' APMS32X0.75 = MALE SOCKET TRANSITION 32X3/4" APMHSXXxX = MALE HEX SOCKET TRANSITION XXmm x XX BSP (M) APMHS32X1 = MALE HEX SOCKET TRANSITION 32X1" APMHS40X1 = MALE HEX SOCKET TRANSITION 40X1" APMHS40X1.25 = MALE HEX SOCKET TRANSITION 40X11/4" APMHS50X1.5 = MALE HEX SOCKET TRANSITION 50X1.1/2" APMHS63X2 = MALE HEX SOCKET TRANSITION 63X2" APMHS75X2.5 = MALE HEX SOCKET TRANSITION 75X2.1/2" APMHS90X3 = MALE HEX SOCKET TRANSITION 90X3" APT = MALE HEX SOCKET TRANSITION XXmm x XX BSP (M) APT = MALE HEX SOCKET TRANSITION 110X4'' APMEXXxXX = MALE ELBOW TRANSITION XXmm x XX BSP (M) APME20X0.5 = MALE ELBOW TRANSITION 20X1/2" APME20X0.75 = MALE ELBOW TRANSITION 20X3/4" APME25X0.5 = MALE ELBOW TRANSITION 25X1/2' APME25X0.75 = MALE ELBOW TRANSITION 25X3/4" APME32X0.5 = MALE ELBOW TRANSITION 32X1/2" APME32X0.75 = MALE ELBOW TRANSITION 32X3/4" APME32X1 = MALE ELBOW TRANSITION 32X1" APVBXXxXX = VALVE BODY XXmm x XX BSP (M) APVB20X0.75 = VALVE BODY 20X3/4" APVB25X0.75 = VALVE BODY 25X3/4" APVB32X1 = VALVE BODY 32X1" APWMEXXxXX = WALL MOUNT ELBOW XXmm x XX BSP (M) APWME20X0.5 = WALL MOUNT ELBOW 20X1/2" APWME25X0.5 = WALL MOUNT ELBOW 25X1/2" APWME25X0.75 = WALL MOUNT ELBOW 25X3/4" APWMGXXxXX = WALL MOUNT GROUP XXmm x XX BSP (M) APWMG25X0.5 = WALL MOUNT GROUP 25X1/2" SDR6 Polypropylene Random Pipes: A20X3.4 SD6 = PPR PIPE 20X3.4 MM SDR 6 4 MTR PN 20 A25X4.2 SD6 = PPR PIPE 25X4.2 MM SDR 6 4 MTR PN 20 A32X5.4 SD6 = PPR PIPE 32X5.4 MM SDR 6 4 MTR PN 20 A40X6.7 SD6 = PPR PIPE 40X6.7 MM SDR 6 4 MTR PN 20 A50X8.3 SD6 = PPR PIPE 50X8.3 MM SDR 6 4 MTR PN 20 A63X10.5 SD6 = PPR PIPE 63X10.5 MM SDR 6 4 MTR PN 20 A75X12.5 SD6 = PPR PIPE 75X12.5 MM SDR 6 4 MTR PN 20 A90X15.0 SD6 = PPR PIPE 90X15.0 MM SDR 6 4 MTR PN 20 A110X18.3 SD6 = PPR PIPE 110X18.3 MM SDR 6 4 MTR PN 20 SDR7.4 Polypropylene Random Pipes: A20X2.8 SD7.4 = PPR PIPE 20X2.8 MM SDR 7.4 4 MTR PN 16 A25X3.5 SD7.4 = PPR PIPE 25X3.5 MM SDR 7.4 4 MTR PN 16 A32X4.4 SD7.4 = PPR PIPE 32X4.4 MM SDR 7.4 4 MTR PN 16 A40X5.5 SD7.4 = PPR PIPE 40X5.5 MM SDR 7.4 4 MTR PN 16 A50X6.9 SD7.4 = PPR PIPE 50X6.9 MM SDR 7.4 4 MTR PN 16 A63X8.6 SD7.4 = PPR PIPE 63X8.6 MM SDR 7.4 4 MTR PN 16 A75X10.3 SD7.4 = PPR PIPE 75X10.3 MM SDR 7.4 4 MTR PN 16 A90X12.3 SD7.4 = PPR PIPE 90X12.3 MM SDR 7.4 4 MTR PN 16 A110X15.1 SD7.4 = PPR PIPE 110X15.1 MM SDR 7.4 4 MTR PN 16 SDR6 Polypropylene Random Glass Fibre Pipes: AGF20X3.4 SD6 = PPRGF PIPE 20X3.4 MM SDR 6 4 MTR AGF25X4.2 SD6 = PPRGF PIPE 25X4.2 MM SDR 6 4 MTR AGF32X5.4 SD6 = PPRGF PIPE 32X5.4 MM SDR 6 4 MTR AGF40X6.7 SD6 = PPRGF PIPE 40X6.7 MM SDR 6 4 MTR AGF50X8.3 SD6 = PPRGF PIPE 50X8.3 MM SDR 6 4 MTR AGF63X10.5 SD6 = PPRGF PIPE 63X10.5 MM SDR 6 4 MTR AGF75X12.5 SD6 = PPRGF PIPE 75X12.5 MM SDR 6 4 MTR AGF90X15.0 SD6 = PPRGF PIPE 90X15.0 MM SDR 6 4 MTR AGF110X18.3 SD6 = PPRGF PIPE 110X18.3 MM SDR 6 4 MTR SDR7.4 Polypropylene Random Glass Fibre Pipes: AGF20X2.8 SD7.4 = PPRGF PIPE 20X2.8 MM SDR 7.4 4 MTR AGF25X3.5 SD7.4 = PPRGF PIPE 25X3.5 MM SDR 7.4 4 MTR AGF32X4.4 SD7.4 = PPRGF PIPE 32X4.4 MM SDR 7.4 4 MTR AGF40X5.5 SD7.4 = PPRGF PIPE 40X5.5 MM SDR 7.4 4 MTR AGF50X6.9 SD7.4 = PPRGF PIPE 50X6.9 MM SDR 7.4 4 MTR AGF63X8.6 SD7.4 = PPRGF PIPE 63X8.6 MM SDR 7.4 4 MTR AGF75X10.3 SD7.4 = PPRGF PIPE 75X10.3 MM SDR 7.4 4 MTR AGF90X12.3 SD7.4 = PPRGF PIPE 90X12.3 MM SDR 7.4 4 MTR AGF110X15.1 SD7.4 = PPRGF PIPE 110X15.1 MM SDR 7.4 4 MTR

Product Images

Approval Holder:

Modern Plastic Industry LLC

Company Name

Modern Plastic Industry LLC

Address

Dubai Investment Park, PO Box No. 31550, Dubai

Country

United Arab Emirates

View All Listings by this Company

Manufacturer:

Modern Plastic Industry LLC

Company Name

Modern Plastic Industry LLC

Address

Dubai Investment Park, PO Box No. 31550, Dubai

Country

United Arab Emirates

View All Listings by this Company

‘F18’ range of brass press fittings (TH and U crimp profiles) with EPDM ‘O’-rings for use with Rifeng B1 PEX/AL/PEX multilayer pipe. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2310918

Size:

40mm, 50mm, 63mm & 75mm.

Marking:

Fittings: RIFENG, size, date of manufacture (YYYY/MM) on crimp sleeve. Pipe: RIFENG, size, date of manufacture and time (YYYYMMDDHHMMSS) and batch number on pipe.

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

B1 multilayer PEX/AL/PEX pipe: B1-3240, B1-4150, B1-5163, B1-6075. F18 press fittings: F18 Equal straight union: F18-S3240x3240, F18-S4150x4150, F18-S5163x5163, F18-S6075x6075. F18 Reducer: F18-S3240x1620, F18-S3240x2025, F18-S3240x2632, F18-S4150x2025, F18-S4150x2632, F18-S4150x3240, F18-S5163x2632, F18-S5163x3240, F18-S5163x4150, F18-S6075x3240, F18-S6075x4150, F18-S6075x5163. F18 Equal elbow: F18-L3240x3240, F18-L4150x4150, F18-L5163x5163, F18-L6075x6075. F18 Equal elbow (45°): F18-L3240x3240 (45°), F18-L4150x4150 (45°), F18-L5163x5163 (45°), F18-L6075x6075 (45°). F18 Equal tee: F18-T3240x3240x3240, F18-T4150x4150x4150, F18-T5163x5163x5163, F18-T6075x6075x6075. F18 Unequal tee: F18-T3240x1216x3240, F18-T3240x1620x3240, F18-T3240x2025x2632, F18-T3240x2025x3240, F18-T3240x2632x2632, F18-T3240x2632x3240, F18-T3240x4150x3240, F18-T4150x1620x4150, F18-T4150x2025x3240, F18-T4150x2025x4150, F18-T4150x2632x4150, F18-T4150x3240x4150, F18-T5163x2025x5163, F18-T5163x2632x5163, F18-T5163x3240x5163, F18-T5163x4150x5163, F18-T6075x2632x6075, F18-T6075x3240x6075, F18-T6075x4150x6075, F18-T6075x5163x6075. F18 Male straight union: F18-S3240x1 1/2, F18-S3240x1 1/4, F18-S3240x1, F18-S4150x1 1/2, F18-S4150x2, F18-S5163x1 1/2, F18-S5163x2, F18-S6075x2 1/2. F18 Female straight union: F18-S3240x1 1/2F, F18-S3240x1 1/4F, F18-S4150x1 1/2F, F18-S5163x2F, F18-S6075x2 1/2F. F18 Male elbow: F18-L3240x1 1/4, F18-L3240x1 1/2, F18-L4150x1 1/2, F18-L5163x2, F18-L6075x2 1/2. F18 Female elbow: F18-L3240x1 1/4F, F18-L3240x1 1/2F, F18-L4150x1 1/2F, F18-L5163x2F, F18-L6075x2 1/2F. F18 Male tee: F18-T3240x1/2x3240, F18-T3240x1x3240, F18-T3240x3/4x3240, F18-T3240x1 1/4x3240, F18-T4150x1 1/2x4150, F18-T4150x1/2x4150, F18-T4150x3/4x4150, F18-T4150x1x4150, F18-T5163x1/2x5163, F18-T5163x1x5163, F18-T5163x2x5163, F18-T5163x3/4x5163. F18 Female tee: F18-T3240x1/2Fx3240, F18-T3240x3/4Fx3240, F18-T3240x1Fx3240, F18-T3240x1 1/4Fx3240, F18-T4150x1/2Fx4150, F18-T4150x3/4Fx4150, F18-T4150x1Fx4150, F18-T4150x1 1/2Fx4150, F18-T5163x1/2Fx5163, F18-T5163x3/4Fx5163, F18-T5163x1Fx5163, F18-T5163x2Fx5163, F18-T6075x1Fx6075, F18-T6075x1 1/2Fx6075, F18-T6075x2Fx6075, F18-T6075x2 1/2Fx6075. F18 End cap: F18-D3240, F18-D4150, F18-D5163, F18-D6075. Models added June 2024: F18 Demountable female straight union F18-S3240x1 1/2F (H), F18-S3240x1 1/4F (H), F18-S4150x1 1/2F (H), F18-S4150x2F (H), F18-S5163x2F (H), F18-S6075x2 1/2F (H).

Product Images

Approval Holder:

Rifeng Enterprise Group Co., Ltd.

Company Name

Rifeng Enterprise Group Co., Ltd.

Address

Rifeng Building, No.16 Zumiao Road, Foshan City, Guangdong Province

Postcode

528000

Country

China

Phone

+86 757 8203 1672

General Email

lio-lu@rifeng.com

View All Listings by this Company