Directory Search Results

Print List

#250404013

Range of thermostatic bar shower mixers, (brass bodies – various finishes) incorporating ceramic disc diverter valves with dome type operating members. The temperature is controlled independently via a thermostatic with a dome type operating member that incorporates a manual override button. The inlets incorporate approved single check valve cartridges, however, the complete assembly has not been fully tested to demonstrate that it provides backflow protection. The products are supplied with a shower hose, handset, overhead shower and riser rail assembly. Maximum working pressure 5.0 bar Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
250404013
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” x ½” BSP Offset union
Marking:
nk Porcelanosa on operating member.
Installation Requirements:
R001 R010 R040
Expiry date:
30/04/2030
Model:
100354597 SMART N THERMO CHR SHOWER COLUMN WITH THERMOSTATIC MIXER 100354598 SMART N THERMO BLACK SHOWER COLUMN WITH THERMOSTATIC MIXER

Approval Holder:
Noken Design S.A.U
Company Name
Noken Design S.A.U
Address
CV-20 Km2 VILA-REAL CASTELLON
Postcode
12540
Country
Spain
General Email
certificaciones@noken.com

View All Listings by this Company

Print This Approval


#241202070

Range of lugged or wafer butterfly valves with either lever or hand wheel operation and a blue epoxy coated ductile iron body. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:
2020 Valves
Section Subtitle:
Butterfly.
WRAS Approval Number:
241202070
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models
Marking:
FAMAT, DN & PN16 on body.
Installation Requirements:
R001
Expiry date:
31/12/2029
Model:
JMC BC1: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500, DN600, DN700, DN800, DN900, DN1000, DN1200(Wafer type) JMC BC2 : DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500, DN600, DN700, DN800, DN900, DN1000, DN1200(lugged type) JMC BC3: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500, DN600, DN700, DN800, DN900, DN1000, DN1200 (Flanged type)

Approval Holder:
SAPAG VALVES
Company Name
SAPAG VALVES
Address
2 rue du Marais HAM
Postcode
80400
Country
France
Phone
+33 (0)3 23 81 42 87
General Email
eric.vincent@sapag-valves.com

View All Listings by this Company

Print This Approval


#241202072

Range of lugged or wafer butterfly valves with either lever or hand wheel operation and a blue epoxy coated ductile iron body. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:
2020 Valves
Section Subtitle:
Butterfly.
WRAS Approval Number:
241202072
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models
Marking:
Vatten logo, size, DI & heat number on body.
Installation Requirements:
R001
Expiry date:
31/12/2029
Model:
D41X: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500, DN600, DN700, DN800, DN900, DN1000, DN1200(flanged type) LTD71X: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500, DN600, DN700, DN800, DN900, DN1000, DN1200(lugged type) D71X: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500, DN600, DN700, DN800, DN900, DN1000, DN1200 (wafer type)

Approval Holder:
Shanghai VATTEN Valve Co., LTD
Company Name
Shanghai VATTEN Valve Co., LTD
Address
East side of Building 2, No. 205, Jianding Road, Fengjing Town, Jinshan District, Shanghai

View All Listings by this Company

Print This Approval


#241202073

Range of lugged or wafer butterfly valves with either lever or hand wheel operation and a blue epoxy coated ductile iron body. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:
2020 Valves
Section Subtitle:
Butterfly.
WRAS Approval Number:
241202073
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models
Marking:
Flowx logo, size, DI & heat number on body.
Installation Requirements:
R001
Expiry date:
31/12/2029
Model:
D41X: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500, DN600, DN700, DN800, DN900, DN1000, DN1200(flanged type) LTD71X: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500, DN600, DN700, DN800, DN900, DN1000, DN1200(lugged type) D71X: DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300, DN350, DN400, DN450, DN500, DN600, DN700, DN800, DN900, DN1000, DN1200 (wafer type)

Approval Holder:
Shanghai Flowx Valve Co.,Ltd.
Company Name
Shanghai Flowx Valve Co.,Ltd.
Address
Building A, No. 205, Jianding Road Fengjing Town, Jinshan District, Shanghai
Country
China

View All Listings by this Company

Print This Approval


#241202074

Range of lugged or wafer butterfly valves with either lever or hand wheel operation and a blue epoxy coated ductile iron body. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:
2020 Valves
Section Subtitle:
Butterfly.
WRAS Approval Number:
241202074
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models
Marking:
Arrowhead logo and product info on data plate. DN & PN16 on body.
Installation Requirements:
R001
Expiry date:
31/12/2029
Model:
lugged type BLLE:DN50, DN65, DN80 BLLX:DN100, DN125, DN150 BLGE:DN250, DN300, DN350 BLGX:DN400, DN450, DN500 BLTX:DN600, DN700, DN800 BLAX:DN900, DN1000, DN1200 wafer type BWLE:DN50, DN65 BWLX:DN80, DN100 BWLS: DN125, DN150 BWGX:DN250, DN300, DN350 BWTX:DN400, DN450, DN500 BWAX:DN600, DN700, DN800 BWPX:DN900, DN1000, DN1200 flanged type BZLE:DN50, DN65 BZLX:DN80, DN100 BZLS:DN125, DN150 BZGX:DN250, DN300, DN350 BZTX:DN400, DN450, DN500 BZPX:DN600, DN700, DN800 BZAX: DN900, DN1000, DN1200

Approval Holder:
Arrowhead pipeline system Engineering (Beijing) Co., LTD
Company Name
Arrowhead pipeline system Engineering (Beijing) Co., LTD
Address
Room 368, No.14 Jiuxianqiao Road, Chaoyang District
Country
China

View All Listings by this Company

Print This Approval


#250402025

Range of wafer, lug or flanged butterfly valves (lever or handwheel operation) with cast iron or stainless steel bodies (blue epoxy coated), EPDM seat and stainless-steel disc. Maximum working pressure 16.0 Bar Maximum operating temperature 90.0 to 100.0°C

Section:
2020 Valves
Section Subtitle:
Butterfly.
WRAS Approval Number:
250402025
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
209040 E sizes: DN 50 to DN 500 Flanged 209040 P sizes: DN 50 to DN 300 Flanged
Marking:
TTV logo on body. TTV logo, model number, DN, PN and other technical data on data plate on body.
Installation Requirements:
R001
Expiry date:
30/04/2030
Model:
209040 E 209040 P 209040 E: Body material/Shaft material/Disc material/Seat Material 20: spheroidal graphite cast iron grade EN 1563 GJS500-7 90: stainless steel grade AISI 420 40: stainless steel grade AISI 316 Flange connection: “W” wafer “L” lug, “B” flanged (Only available for EPDM seat)

Manufacturer:
TTV, S.A.
Company Name
TTV, S.A.
Address
POL. IND. NTRA. SEÑORA DE BUTARQUE C/ SEVERO OCHOA, 11 28914 LEGANÉS (MADRID)
Country
Spain

View All Listings by this Company

Print This Approval


#250404017

Wall mounted concealed two way and three way diverter valve assembly (brass bodies with trim sets in various finishes). The 59556 000070 and 59548 000170 concealed installation units are not approved in their own right. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:
2050 Diverter
Section Subtitle:
Diverter cartridge(s) with manual adjustment.
WRAS Approval Number:
250404017
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (F)
Marking:
Keuco on wall plate
Installation Requirements:
R001 R040
Expiry date:
30/04/2030
Model:
IXMO range: 2-way divetrer: 59557 xxy0zz 2-way stop and diverter valve. Which must be installed in conjunction with the following: 59556 000070 concealed installation unit. 3-way divetrers: 59549 xxy1zz 3-way stop valve & diverter with hose connection, 59549 xxy2zz 3-way stop valve & diverter w. hose connect./shower holder. Both of which must be installed in conjunction with the following: 59548 000170 concealed installation unit. Where xx denotes finish: 01: chrome plated, 02: polished bronze, 03: brushed bronze, 04: polished nickel, 05: brushed nickel; 07: stainless steel finish, 12: polished black chrome, 13: brushed black chrome, 17: aluminium finish, 21: stainless steel finish, 25: brushed brass, 29: brushed red gold, 35: brushed titan black, 37: black matt. y0 = diverter valve without hose connection: 00: Pure handle, without hose connection, 10: Comfort handle, without hose connection). y1 = diverter valve with hose connection: 01: Pure handle, with hose connection, 10: Comfort handle, with hose connection. y2 = diverter valve with hose connection and shower holder: 02: Pure handle, with hose connection and shower holder, 12: Comfort handle, with hose connection and shower holder. zz = different shapes of rosette: z1: Rosette round, z2: Rosette square.

Approval Holder:
KEUCO GmbH & Co. KG
Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36 Hemer
Postcode
58675
Country
Germany
Phone
+49 2372 / 904-265
General Email
info@keuco.de

View All Listings by this Company

Print This Approval


#250302702

Range of control valves with plastic bodies, supplied with bypass valves. Maximum working pressure 8.6 bar. Maximum operating temperature 39°C.

Section:
2170 Valves
Section Subtitle:
Flow control, manually operated.
WRAS Approval Number:
250302702
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” BSP (M)
Marking:
Canature logo, model name, size and other technical on adhesive label on valve body. Flow arrow on bypass body.
Installation Requirements:
R001
Expiry date:
31/03/2030
Model:
Control Valve BNT 850HE Pro T Control Valve BNT 850HE Pro F Control Valve BNT 851HE Pro T Control Valve BNT 851HE Pro F Control Valve BNT 1850HE Pro T Control Valve BNT 1850HE Pro F Control Valve BNT 1851HE Pro T Control Valve BNT 1851HE Pro F Control Valve BNT 2850HE Pro T Control Valve BNT 2850HE Pro F Control Valve BNT 2851HE Pro T Control Valve BNT 2851HE Pro F Control Valve BNT 3850HE Pro T Control Valve BNT 3850HE Pro F Control Valve BNT 3851HE Pro T Control Valve BNT 3851HE Pro F Control Valve BNT 4850HE Pro T Control Valve BNT 4850HE Pro F Control Valve BNT 4851HE Pro T Control Valve BNT 4851HE Pro F Control Valve BNT 5850HE Pro T Control Valve BNT 5850HE Pro F Control Valve BNT 5851HE Pro T Control Valve BNT 5851HE Pro F Control Valve BNT 5850SE Pro T Control Valve BNT 5850SE Pro F Control Valve BNT 5851SE Pro T Control Valve BNT 5851SE Pro F Control Valve BNT 850HE Pro BLE T Control Valve BNT 850HE Pro BLE F Control Valve BNT 851HE Pro BLE T Control Valve BNT 851HE Pro BLE F

Approval Holder:
Canature Health Technology Group Co., Ltd.
Company Name
Canature Health Technology Group Co., Ltd.
Address
No.508&518, Chuanda Road, Pudong New Area, Shanghai
Country
China

View All Listings by this Company

Print This Approval


#2205808

Range of pressure reducing valves with DZR brass bodies, internal stainless steel filter, EPDM ‘O’-rings and diaphragm. Adjustable outlet pressures between 1.0 and 6.0 bar or 1.0 and 12.0 bar (see model). Maximum inlet supply pressure 25.0 bar. Maximum operating temperature 80°C.

Section:
2200 Valves
Section Subtitle:
Pressure reducing.
WRAS Approval Number:
2205808
Size:
SEE MODEL
Marking:
Oventrop on operating member size, DN, flow arrow, CR and date of manufacturer (MM.YY) on body.
Installation Requirements:
R001 R120
Expiry date:
31/05/2027
Model:
Adjustable between 1.0-6.0 bar: 447 69 04: ½” BSP (M) Union, 447 69 06: ¾” BSP (M) Union, 447 69 08: 1” BSP (M) Union, 447 69 10: 1 ¼” BSP (M) Union, 447 69 12: 1 ½” BSP (M) Union, 447 69 16: 2” BSP (M) Union.

Approval Holder:
Oventrop UK Limited
Company Name
Oventrop UK Limited
Address
Oventrop House Unit 11 Hatch Industrial Park Basingstoke
Postcode
RG24 7NG
Country
United Kingdom
Phone
+44 (0) 1256 330 441
General Email
mikewise@oventrop.co.uk

View All Listings by this Company

Print This Approval


#241204733

Range of pressure reducing valves with DZR brass or bronze bodies and manually adjustable outlet pressure range between 2.5bar to 6.0bar. Maximum working pressure: 25.0 Maximum operating temperature 80°C.

Section:
2200 Valves
Section Subtitle:
Pressure reducing.
WRAS Approval Number:
241204733
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
see models
Marking:
VIP, PN, made in Italy, size & flow arrow on body.
Installation Requirements:
R001 R120
Expiry date:
31/12/2029
Model:
½“ BSP F PRESSURE REDUCING VALVE 51/0529 ¾” BSP F PRESSURE REDUCING VALVE 51/0529 1” BSP F PRESSURE REDUCING VALVE 51/0529 1 ¼“ BSP F PRESSURE REDUCING VALVE 51/0529 1½“ BSP F PRESSURE REDUCING VALVE 51/0529 2“ BSP F PRESSURE REDUCING VALVE 51/0529

Approval Holder:
Valves Instruments Plus Ltd
Company Name
Valves Instruments Plus Ltd
Address
VIP House Chaddock Lane Astley Manchester
Postcode
M29 7JT
Country
United Kingdom
Phone
01942 885 700

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 395 of 401

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.