Filling loop assemblies comprising of a stainless steel braided, EPDM lined hose, double check valve assembly with isolation valve verified by test (suitable for backflow protection against fluid category 3) and either a straight or tee isolation valve. Maximum working pressure 10.0 bar. Maximum operating temperature 85ºC.

Section:

1015 Filling Loop

Size:

15mm compression inlet/outlet

Marking:

Company logo "S", WRAS, date of manufacture (YYYY) on crimp connection of hose. CR and flow arrow on double check valve assembly.

Installation Requirements:

R001

Expiry date:

31/03/2027

Model:

SS-E6-01 (STRAIGHT ISOLATION VALVE) & SS-E6-02 (TEE ISOLATION VALVE) FILLING LOOP ASSEMBLIES

Approval Holder:

Ningbo Safewell Plumbing Co. Ltd.

Company Name

Ningbo Safewell Plumbing Co. Ltd.

Address

199 Xiangyun North Road Ningbo Hi-Tech Zone Zhejiang

Country

China

View All Listings by this Company

Filling loop assemblies comprising of a stainless steel braided, EPDM lined hose, double check valve assembly with isolation valve verified by test (suitable for backflow protection against fluid category 3) and either a straight or tee isolation valve. Maximum working pressure 10.0 bar. Maximum operating temperature 85ºC.

Section:

1015 Filling Loop

Size:

15mm compression inlet/outlet

Marking:

WRAS, date of manufacture (YYYY) and Valtech on crimp connection of hose. CR and flow arrow on double check valve assembly.

Installation Requirements:

R001

Expiry date:

31/03/2027

Model:

FH-SS-06-01 (STRAIGHT ISOLATION VALVE) & FH-SS-06-02 (TEE ISOLATION VALVE) FILLING LOOP ASSEMBLIES

Approval Holder:

Ningbo Valtech Flow Control Co. Ltd.

Company Name

Ningbo Valtech Flow Control Co. Ltd.

Address

Room 610 New Oriental Times Building No.1130

Country

Baizhang East Road

Phone

0574-88001556

View All Listings by this Company

Range of medical sterilised water filter cartridges with plastic bodies and EPDM ‘O’-Rings. Models MTFW-SLSS / MTFD-SLSS incorporate a check valve cartridge on the inlet, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum Working Temperature: 50°C.

Section:

1050 Filters and Housings

WRAS Approval Number:

2205057

Note:

Open Outlet Use Only. Claims made by the manufacturer have not been tested and are not considered part of the approval listing.

Marking:

Pentair, model code and technical information on adhesive label located on body.

Installation Requirements:

R001 R120 R150 R170

Expiry date:

31/05/2027

Model:

MSF-SLSS: Medical Shower Filter Sterilised Starter Set (Connection 1/2" BSP/NPT M) MSF-SLRC: Medical Shower Filter Sterilised Replacement Cartridge (Connection Quick Release) MTFW-SLSS: Medical Tap Filter Drinking Sterilised Starter Set (Connection 1/2" F BSP/NPT) MTFD-SLRC: Medical Tap Filter Drinking Sterilised Replacement Cartridge (Connection Quick Release) MTFD-SLSS: Medical Tap Filter Drinking Sterilised Starter Set (Connection 1/2" F BSP/NPT) MTFD-SLRC: Medical Tap Filter Drinking Sterilised Replacement Cartridge (13.68mm Connection Quick Release)

Approval Holder:

Fileder Filter Systems Ltd.

Company Name

Fileder Filter Systems Ltd.

Address

20/20 BUSINESS PARK, MAIDSTONE, KENT

Postcode

ME16 0LS

Country

United Kingdom

Phone

01622 621940

General Email

jasmine@fileder.co.uk

View All Listings by this Company

Range of DZR brass couplings incorporating EPDM ‘O’-rings for use with Uponor Ecoflex Aqua and Uponor Ecoflex VIP Aqua PE-Xa pipe. For above and below ground use. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2112320

Size:

See model

Marking:

Company logo ( U = Uponor) or W (Wipex brand of Uponor) CR mark and production date on body (YY/letter – A would be 1st production run, B would be 2nd production run etc.).

Installation Requirements:

R001 R008

Expiry date:

31/12/2026

Model:

Wipex male coupling: 1018336 (25X3,5-G1), 1018338 (32X4,4-G1), 1018339 (40X5,5-G1 ¼), 1018340 (50X6,9-G1 ¼), 1018341 (63X8,6-G2), 1018342 (75X10,3-G2), 1018343 (90X12,3-G3), 1023170 (110X15,1-G3) Wipex tee: 1018345 (G1-G1-G1), 1018346 (G1 ¼-G1 ¼-G1 ¼), 1018347 (G2-G2-G2), 1018348 (G3-G3-G3) Wipex elbow: 1018350 (G1-G1), 1018351 (G1 ¼-G1 ¼), 1018352 (G2-G2), 1018353 (G3-G3) Wipex joint: 1018355 (G1-G1), 1018356 (G1 ¼-G1 ¼), 1018357 (G2-G2), 1018358 (G3-G3) Wipex flange: 1018359 (F25/4-85/G1), 1018360 (F32/4-100/G1 ¼), 1018362 (F50/4-125/G2), 1018364 (F80/8-160/G3) Wipex reducer: 1018368 (G1 ¼-G1), 1018369 (G1 ½-G1 ¼), 1018371 (G2-G1), 1018372 (G2-G1 ¼), 1018374 (G3-G1), 1018375 (G3-G1 ¼), 1018376 (G3-G2) Wipex jointing equal: 1042970 (25X3,5-25X3,5), 1042974 (32X4,4-32X4,4), 1042979 (40X5,5-40X5,5), 1042982 (63X8,6-63X8,6), 1042983 (50X6,9-50X6,9) Wipex swivel union: 1045455 (G1), 1045456 (G1 ¼-G1), 1045457 (G1 ¼), 1045458 (G2-G1 ¼), 1045459 (G2), 1045460 (G3-G2), 1045461 (G3) Wipex RS adapter: 1047017 (63x8,6 RS2), 1047018 (75x10,3 RS2), 1047019 (90x12,3 RS3), 1047020 (110x15,1 RS3)

Approval Holder:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestrasse 56, Hassfurt

Postcode

97437,

Country

Germany

Phone

0034916853600

General Email

mariaisabel.fernandez@uponor.com

View All Listings by this Company

Tigris K5 (PPSU - plastic body) and M5 (DZR brass body) ranges of press-fit (U, H, TH crimp profiles) fittings with stainless steel crimp sleeves and EPDM ‘O’-rings, for use with Tigris K1 multi-layer PEX-c/AL/PE-HD pipe. Maximum working pressure 6.0 bar. Maximum operating temperature 95°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2205081

Note:

R008 applies to the K5 fittings only.

Size:

16mm to 40mm crimp fittings

Marking:

Fittings: Wavin and size on crimp sleeve. Pipe: Wavin, size, pipe material, EN ISO 21003, maximum temperature, maximum pressure and technical information on pipe.

Installation Requirements:

R001 R008

Expiry date:

31/05/2027

Model:

Tigris K5 range: 3079754: Tigris K5 Coupler 16, 3079755: Tigris K5 Coupler 20, 3079756: Tigris K5 Coupler 25, 3079757: Tigris K5 Coupler 32, 3079758: Tigris K5 Coupler 40. 3079759: Tigris K5 Coupler reduced 20x16, 3079760: Tigris K5 Coupler reduced 25x16, 3079761: Tigris K5 Coupler reduced 25x20, 3079762: Tigris K5 Coupler reduced 32x20, 3079763: Tigris K5 Coupler reduced 32x25, 3079764: Tigris K5 Coupler reduced 40x32. 3079768: Tigris K5 Elbow 90° 16, 3079769: Tigris K5 Elbow 90° 20, 3079770: Tigris K5 Elbow 90° 25, 3079771: Tigris K5 Elbow 90° 32, 3079772: Tigris K5 Elbow 90° 40. 3079773: Tigris K5 Elbow 45° 25, 3079774: Tigris K5 Elbow 45° 32, 3079775: Tigris K5 Elbow 45° 40. 3079776: Tigris K5 Elbow MT 90° 16x1/2", 3079777: Tigris K5 Elbow MT 90° 20x1/2", 3079778: Tigris K5 Elbow MT 90° 20x3/4", 3079779: Tigris K5 Elbow MT 90° 25x3/4", 3079780: Tigris K5 Elbow MT 90° 25x1", 3079781: Tigris K5 Elbow MT 90° 32x1". 3079782: Tigris K5 Elbow FT 90° 16x1/2", 3079783: Tigris K5 Elbow FT 90° 20x1/2", 3079784: Tigris K5 Elbow FT 90° 20x3/4", 3079785: Tigris K5 Elbow FT 90° 25x3/4", 3079786: Tigris K5 Elbow FT 90° 32x1". 3079788: Tigris K5 Connector FT 16x1/2", 3079789: Tigris K5 Connector FT 16x3/4", 3079790: Tigris K5 Connector FT 20x1/2", 3079791: Tigris K5 Connector FT 20x3/4", 3079793: Tigris K5 Connector FT 25x3/4", 3079796: Tigris K5 Connector FT 32x1", 3079797: Tigris K5 Connector FT 40x1 1/4". 3079798: Tigris K5 Connector MT 16x1/2", 3079799: Tigris K5 Connector MT 16x3/4", 3079800: Tigris K5 Connector MT 20x1/2", 3079801: Tigris K5 Connector MT 20x3/4", 3079802: Tigris K5 Connector MT 25x3/4", 3079803: Tigris K5 Connector MT 25x1", 3079804: Tigris K5 Connector MT 32x1", 3079805: Tigris K5 Connector MT 32x1 1/4", 3079806: Tigris K5 Connector MT 40x1 1/4". 3079811: Tigris K5 Tee 16, 3079812: Tigris K5 Tee 20, 3079813: Tigris K5 Tee 25, 3079814: Tigris K5 Tee 32, 3079815: Tigris K5 Tee 40. 3079816: Tigris K5 Tee FT 16x1/2"x16, 3079817: Tigris K5 Tee FT 20x1/2"x20, 3079818: Tigris K5 Tee FT 20x3/4"x20, 3079819: Tigris K5 Tee FT 25x1/2"x25, 3079820: Tigris K5 Tee FT 25x3/4"x25. 3079821: Tigris K5 Tee 16x20x16, 3079822: Tigris K5 Tee 20x16x16, 3079823: Tigris K5 Tee 20x16x20, 3079824: Tigris K5 Tee 20x20x16, 3079825: Tigris K5 Tee 25x20x20, 3079826: Tigris K5 Tee 20x25x20, 3079827: Tigris K5 Tee 25x16x25, 3079828: Tigris K5 Tee 25x20x25, 3079829: Tigris K5 Tee 25x16x16, 3079833: Tigris K5 Tee 25x32x25, 3079834: Tigris K5 Tee 32x16x32, 3079835: Tigris K5 Tee 32x20x32, 3079836: Tigris K5 Tee 32x25x25, 3079837: Tigris K5 Tee 32x25x32, 3079839: Tigris K5 Tee 40x25x40, 3079840: Tigris K5 Tee 40x32x40, 3079842: Tigris K5 Tee 40x32x32. 3079854: Tigris K5 Wall Flange FT 16x1/2", 3079855: Tigris K5 Wall Flange FT 20x1/2", 3079856: Tigris K5 Wall Flange FT 20x3/4". 3079859: Tigris K5 End Plug 16, 3079860: Tigris K5 End Plug 20, 3079861: Tigris K5 End Plug 25. Tigris M5 range: 4083206 (formerly known as 4065978): Tigris M5 Coupler Metal 16x15, 4083203 (formerly known as 4065979): Tigris M5 Coupler Metal 20x15, 4083205 (formerly known as 4065981): Tigris M5 Coupler Metal 20x22, 4083204 (formerly known as 4065982): Tigris M5 Coupler Metal 25x22, 4065983: Tigris M5 Coupler Metal 25x28. 4066029: Tigris M5 Connector FT 16x3/4". 4066042: Tigris M5 Connector MT 16x3/4", 4066045: Tigris M5 Connector MT 20x1". 4066121: Tigris M5 Tee 32x25x32. 4065973: Tigris M5 Coupler 16, 4065974: Tigris M5 Coupler 20, 4065975: Tigris M5 Coupler 25, 4065976: Tigris M5 Coupler 32, 4065977: Tigris M5 Coupler 40. 4065985: Tigris M5 Coupler 20x16, 4065987: Tigris M5 Coupler 25x20, 4065990: Tigris M5 Coupler 32x25. 4065993: Tigris M5 Elbow 90° 16, 4065994: Tigris M5 Elbow 90° 20, 4065995: Tigris M5 Elbow 90° 25, 4065996: Tigris M5 Elbow 90° 32, 4065997: Tigris M5 Elbow 90° 40. 4066001: Tigris M5 Elbow MT 90° 16x1/2", 4066003: Tigris M5 Elbow MT 90° 20x1/2", 4066004: Tigris M5 Elbow MT 90° 20x3/4", 4066005: Tigris M5 Elbow MT 90° 25x3/4", 4066007: Tigris M5 Elbow MT 90° 32x1. 4066009: Tigris M5 Elbow FT 90° 16x1/2", 4066011: Tigris M5 Elbow FT 90° 20x1/2", 4066012: Tigris M5 Elbow FT 90° 20x3/4", 4066013: Tigris M5 Elbow FT 90° 25x3/4", 4066015: Tigris M5 Elbow FT 90° 32x1". 4066028: Tigris M5 Connector FT 16x1/2", 4066030: Tigris M5 Connector FT 20x1/2", 4066031: Tigris M5 Connector FT 20x3/4", 4066033: Tigris M5 Connector FT 25x3/4", 4066034: Tigris M5 Connector FT 25x1", 4066035: Tigris M5 Connector FT 32x1". 4066041: Tigris M5 Connector MT 16x1/2", 4066043: Tigris M5 Connector MT 20x1/2", 4066044: Tigris M5 Connector MT 20x3/4", 4066046: Tigris M5 Connector MT 25x3/4", 4066047: Tigris M5 Connector MT 25x1", 4066048: Tigris M5 Connector MT 32x1", 4066049: Tigris M5 Connector MT 32x1 1/4", 4066050: Tigris M5 Connector MT 40x1 1/2", 4066051: Tigris M5 Connector MT 40x1 1/4". 4066086: Tigris M5 Tee 16, 4066087: Tigris M5 Tee 20, 4066088: Tigris M5 Tee 25, 4066089: Tigris M5 Tee 32. 4066095: Tigris M5 Tee FT 25x3/4"x25, 4066097: Tigris M5 Tee FT 32x1"x32, 4066099: Tigris M5 Tee FT 40x1"x40. 4066106: Tigris M5 Tee 16x20x16, 4066107: Tigris M5 Tee 20x16x16, 4066108: Tigris M5 Tee 20x16x20, 4066109: Tigris M5 Tee 20x20x16, 4066110: Tigris M5 Tee 25x20x20, 4066112: Tigris M5 Tee 25x16x25, 4066113: Tigris M5 Tee 25x20x25, 4066120: Tigris M5 Tee 32x20x32. Pipe: Tigris K1 multi-layer PEX-c/AL/PE-HD pipe. 4065978 Tigris M5 Coupler Metal 16x15 4065979 Tigris M5 Coupler Metal 20x15 4065981 Tigris M5 Coupler Metal 20x22 4065982 Tigris M5 Coupler Metal 25x22

Approval Holder:

Wavin Ltd.

Company Name

Wavin Ltd.

Address

Edlington Lane, Edlington Doncaster

Postcode

DN12 1BY

Country

United Kingdom

Phone

01709 856300

View All Listings by this Company

Range of copper press fittings with EPDM ‘O’-rings for use with EN1057 copper tube. The joints are achieved by means of a press tool. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2107337

Size:

See model

Marking:

CUPRO-FIT & size on body.

Installation Requirements:

R001

Expiry date:

31/07/2026

Model:

PRESS FIT 90° Elbow: PFEL15, PFEL22, PFEL28, PFEL35, PFEL42, PFEL54 PRESS FIT 90° Street Elbow: PFELS15, PFELS22, PFELS28, PFELS35, PFELS42, PFELS54 PRESS FIT 45° Elbow: PFEL1545, PFEL2245, PFEL2845, PFEL3545, PFEL4245, PFEL5445 PRESS FIT 45° Street Elbow: PFELS1545, PFELS2245, PFELS2845, PFELS3545, PFELS4245, PFELS5445 PRESS FIT Full Crossover PFFCO15, PFFCO22, PFFCO28 PRESS FIT Part Crossover PFPCO15, PFPCO22. PFPCO28 PRESS FIT Coupler&Slip Coupler PFCO15, PFCO22, PFCO28, PFCO35, PFCO42, PFCO54 PFSC15, PFSC22, PFSC28, PFSC35, PFSC42, PFSC54 PRESS FIT Equal Tee PFTE15, PFTE22, PFTE28, PFTE35, PFTE42, PFTE54 PRESS FIT Reducing TEE PFTE151522, PFTE 221515, PFTE 221522 PFTE 222215, PFTE 222228, PFTE 281515 PFTE 281522, PFTE 282215, PFTE 282222 PFTE 282228, PFTE 282815, PFTE 282822 PFTE 282835, PFTE 352222, PFTE 352235 PFTE 352822, PFTE 352828, PFTE 352835 PFTE 353515, PFTE 353522, PFTE 353528 PFTE 402828, PFTE 423535, PFTE 422842 PFTE 423542, PFTE 424215, PFTE 424222 PFTE 424228, PFTE 424235, PFTE 545415 PFTE 545428, PFTE 545435, PFTE 544242 PFTE 545442 PRESS FIT Fitting Reducer FTGXC PFRE2215, PFRE 2815, PFRE 2822, PFRE 3515 PFRE 3522, PFRE 3528, PFRE 4215, PFRE 4222 PFRE 4228, PFRE 4235, PFRE 5415, PFRE 5422 PFRE 5428, PFRE 5435, PFRE 5442 PRESS FIT Reducer Coupler CXC PFRC2215, PFRC 2815, PFRC 2822, PFRC 3515 PFRC 3522, PFRC 3528, PFRC 4215, PFRC 4222 PFRC 4228, PFRC 4235, PFRC 5415, PFRC 5422 PFRC 5428, PFRC 5435, PFRC 5442 PRESS FIT End Cap PFEC15, PFEC22, PFEC28, PFEC35, PFEC42, PFEC54

Approval Holder:

Cubralco Ltd.

Company Name

Cubralco Ltd.

Address

Ricketts Close, Firs Industrial Estate, Kidderminster, Worcestershire

Postcode

DY11 7QN

View All Listings by this Company

Range of copper press fittings with EPDM ‘O’-rings for use with EN1057 copper tube. The joints are achieved by means of a press tool. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2107338

Size:

See model

Marking:

MF & size on body.

Installation Requirements:

R001

Expiry date:

31/07/2026

Model:

Copper Press Elbow: MCP16150000, MCP16220000, MCP16280000, MCP16350000, MCP16420000, MCP16540000 CU Press 90D Street Elbow: MCP97150000, MCP97220000, MCP97280000, MCP97350000, MCP97420000, MCP97540000 CU Press 45D Obtuse Elbow: MCP93150000, MCP93220000, MCP93280000, MCP93350000, MCP93420000, MCP93540000 CU Press 45D Street Elbow: MCP95150000, MCP95220000, MCP95280000, MCP95350000, MCP95420000, MCP95540000 CU Press Full Crossover MCP86150000, MCP86220000, MCP86280000 PRESS FIT Part Crossover MCP85150000, MCP85220000, MCP85280000 Copper Press Coupler& Slip Coupler MCP10150000, MCP10220000, MCP10280000, MCP10350000, MCP10420000, MCP10540000, MCP81150000, MCP81220000, MCP81280000, MCP81350000, MCP81420000, MCP81540000 Copper Press Equal Tee MCP20150000, MCP20220000, MCP20280000, MCP20350000, MCP20420000, MCP20540000 PRESS FIT Reducing TEE MCP20151522, MCP20221515, MCP20221522 MCP20222215, MCP20222228, MCP20281515 MCP20281522, MCP20282215, MCP20282222 MCP20282228, MCP20282815, MCP20282822 MCP20282835, MCP20352222, MCP20352235 MCP20352822, MCP20352828, MCP20352835 MCP20353515, MCP20353522, MCP20353528 MCP20402828, MCP20 423535, MCP20422842 MCP20423542, MCP20424215, MCP20424222 MCP20424228, MCP20 424235, MCP20545415 MCP20545428, MCP20545435, MCP20544242 MCP20545442 CU Press Fitt Reducer MCP92221500, MCP92281500, MCP92282200, MCP92351500 MCP92352200, MCP92352800, MCP92421500, MCP92422200 MCP92422800, MCP92423500, MCP92541500, MCP92542200 MCP92542800, MCP92543500, MCP92544200 PRESS FIT Reducer Coupler CXC MCP10221500, MCP10281500, MCP10282200, MCP10351500 MCP10352200, MCP10352800, MCP10421500, MCP10422200 MCP10422800, MCP10423500, MCP10541500, MCP10542200 MCP10542800, MCP10543500, MCP10544200 Copper Press End Cap MCP15150000, MCP15220000, MCP15280000, MCP15350000, MCP15420000, MCP15540000

Approval Holder:

Masterflow UK

Company Name

Masterflow UK

Address

Astley Park Estate, The Gatehouse, Kennedy Road, Astley, Manchester

Postcode

M29 7JY

View All Listings by this Company

Range of solder ring brass fittings for use with copper tube (manufactured to EN 1057). The HLSR20CB-d tank connector incorporates an EPDM washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2211801

Size:

Solder ring: 15mm-54mm (see model). Threaded connections: ¼”-2” BSP (see model).

Marking:

HAILIANG, size & PN on body.

Installation Requirements:

R001

Expiry date:

30/11/2027

Model:

HLSR11EB-a Female 90 Degree Elbow: 15mm-54mm x ¼”-2” BSP (F). HLSR11EB-b Male 90 Degree Elbow: 15mm-54mm x ¼”-2” BSP (M). HLSR11EB-c Wallplate: 15mm-22mm x ½”-¾” BSP (F). HLSR20CB-a Male Coupler: 15mm-54mm x ⅜”-2” BSP (M). HLSR20CB-b Female Coupler: 15mm-54mm x ⅜”-2” BSP (F). HLSR20CB-c S/R W/Plate Straight: 15mm-22mm x ¼”-¾” BSP (F). HLSR20CB-d Tank connector: 15mm-28mm x ½”-1” BSP (M). HLSR30TB-a Female Tee: 15mm-28mm x 15mm-28mm x ¼”-1¼” BSP (F). 15mm-28mm x ¼”-1” BSP (F) x 15mm-28mm. Models added July 2025: HLSR30TB-a Female Tee: 35mm-42mm x 35mm-42mm x ½” BSP (F).

Approval Holder:

Zhejiang Hailiang Co., Ltd

Company Name

Zhejiang Hailiang Co., Ltd

Address

Diankou Zhuji Zhejiang

Country

China

View All Listings by this Company

Pexal range of brass press fittings with EPDM ‘O’-rings for use with copper pipe EN1057. Model VS0171373 incorporates 90° copper elbow (chrome plated) Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2203337

Size:

16mm, 20mm, 26mm

Marking:

Valsir on fitting body

Installation Requirements:

R001

Expiry date:

31/03/2027

Model:

VS0171311 VS0171312 VS0171313 VS0171107UK VS0171119UK VS0171111UK VS0171117UK VS0171005 VS0171021 VS0171025 VS0171051 VS0171373 VS0171205 VS0171105 VS0171115

Approval Holder:

Valsir Spa

Company Name

Valsir Spa

Address

MERLARO 2 STREET VESTONE

Postcode

25078

Country

Italy

Phone

+39 365 877011

General Email

valsir@valsir.it

View All Listings by this Company

‘AF’ range of compression fittings with brass or chrome plated brass bodies for use with copper pipe (manufactured to EN1057). The AF14 and AF15 tap connector models incorporate an EPDM washer. Maximum working pressure 16.0 bar. Maximum working temperature 85˚C

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2204071

Size:

See model

Marking:

“DOZ” and Size on fitting body

Installation Requirements:

R001

Expiry date:

30/04/2027

Model:

AF01 couplings-cxc: 6 - 54mm compression. AF01B repair couplings-cxc: 6 - 54mm compression. AF01R reducing couplings cxc: 10 x 8mm compression, 12 x 8mm compression, 15 x 8mm compression, 12 x 10mm compression, 15 x 10mm compression, 15 x 12mm compression, 18 x 12mm compression, 16 x 15mm compression, 22 x 15mm compression, 28 x 15mm compression, 28 x 22mm compression, 35 x 28mm compression, 42 x 35mm compression, 54 x 42mm compression. AF02P female adaptors-parallel: 6mm compression, x ¼" BSP (F), 6mm compression, x ⅜" BSP (F), 8mm compression, x ⅜" BSP (F), 8mm compression, x ¼" BSP (F), 10mm compression, x ¼" BSP (F), 10mm compression, x ⅜" BSP (F), 10mm compression, x ½" BSP (F), 12mm compression, x ¼" BSP (F), 12mm compression, x ⅜" BSP (F), 12mm compression, x ½" BSP (F), 15mm compression, x ¼" BSP (F), 15mm compression, x ⅜" BSP (F), 15mm compression, x ½" BSP (F), 15mm compression, x ¾" BSP (F), 18mm compression, x ½" BSP (F), 22mm compression, x ½" BSP (F), 22mm compression, x ¾" BSP (F), 22mm compression, x 1" BSP (F), 28mm compression, x 1" BSP (F), 28mm compression, x ¾” BSP (F), 35mm compression, x 1-¼" BSP (F), 42mm compression, x 1-½" BSP (F), 54mm compression, x 2" BSP (F). AF03T male adaptors-CxMI taper: 6mm compression, x ¼" BSP (M), 6mm compression, x ⅜" BSP (M), 8mm compression, x ¼" BSP (M), 8mm compression, x ⅜" BSP (M), 8mm compression, x ½" BSP (M), 10mm compression, x ¼" BSP (M), 10mm compression, x ⅜" BSP (M), 10mm compression, x ½" BSP (M), 12mm compression, x ¼" BSP (M), 12mm compression, x ⅜" BSP (M), 12mm compression, x ½" BSP (M), 15mm compression, x ⅜" BSP (M), 15mm compression, x ¼" BSP (M), 15mm compression, x ½" BSP (M), 15mm compression, x ¾" BSP (M), 18mm compression, x ½" BSP (M), 22mm compression, x ½" BSP (M), 22mm compression, x ¾" BSP (M), 22mm compression, x 1" BSP (M), 28mm compression, x ¾" BSP (M), 28mm compression, x 1" BSP (M), 35mm compression, x 1-¼" BSP (M), 42mm compression, x 1-½" BSP (M), 54mm compression, x 2" BSP (M). AF03P male adaptors-CxMI parallel: 6mm compression, x ¼" BSP (M), 6mm compression, x ⅜" BSP (M), 8mm compression, x ¼" BSP (M), 8mm compression, x ⅜" BSP (M), 8mm compression, x ½" BSP (M), 10mm compression, x ¼" BSP (M), 10mm compression, x ⅜" BSP (M), 10mm compression, x ½" BSP (M), 12mm compression, x ¼" BSP (M), 12mm compression, x ⅜" BSP (M), 12mm compression, x ½" BSP (M), 15mm compression, x ⅜" BSP (M), 15mm compression, x ¼" BSP (M), 15mm compression, x ½" BSP (M), 15mm compression, x ¾" BSP (M), 18mm compression, x ½" BSP (M), 22mm compression, x ½" BSP (M), 22mm compression, x ¾" BSP (M), 22mm compression, x 1" BSP (M), 28mm compression, x ¾" BSP (M), 28mm compression, x 1" BSP (M), 35mm compression, x 1-¼" BSP (M), 42mm compression, x 1-½" BSP (M), 54mm compression, x 2" BSP (M). AF03P extended male adaptors-CxMI: 10mm compression, x ⅜" BSP (M), 12mm compression, x ⅜" BSP (M), 15mm compression, x ½" BSP (M), 22mm compression, x ¾" BSP (M), 28mm compression, x 1" BSP (M). AF04 tank connectors-lug style: 10 - 54mm compression. AF04N tank connectors-nut style: 10 - 54mm compression. AF05 elbows 90 degree-CxC: 6 - 54mm compression. 8 x 6mm compression, 10 x 8mm compression, 12 x 10mm compression, 15 x 12mm compression, 18 x 15mm compression, 22 x 15mm compression, 22 x 18mm compression, 28 x 22mm compression, 35 x 28mm compression, 42 x 35mm compression, 54 x 42mm compression, AF06T male elbows-CxMI taper: 6mm compression, x ¼" BSP (M), 6mm compression, x ⅜" BSP (M), 8mm compression, x ¼" BSP (M), 8mm compression, x ⅜" BSP (M), 10mm compression, x ¼" BSP (M), 10mm compression, x ⅜" BSP (M), 10mm compression, x ½" BSP (M), 12mm compression, x ¼" BSP (M), 12mm compression, x ⅜" BSP (M), 12mm compression, x ½" BSP (M), 15mm compression, x ¼" BSP (M), 15mm compression, x ⅜" BSP (M), 15mm compression, x ½" BSP (M), 15mm compression, x ¾" BSP (M), 18mm compression, x ½" BSP (M), 22mm compression, x ½" BSP (M), 22mm compression, x ¾" BSP (M), 22mm compression, x 1" BSP (M), 28mm compression, x ¾" BSP (M), 28mm compression, x 1" BSP (M), 35mm compression, x 1¼" BSP (M), 42mm compression, x 1½" BSP (M), 54mm compression, x 2" BSP (M). AF06P male elbows-CxMI parallel: 6mm compression, x ¼" BSP (M), 6mm compression, x ⅜" BSP (M), 8mm compression, x ¼" BSP (M), 8mm compression, x ⅜" BSP (M), 10mm compression, x ¼" BSP (M), 10mm compression, x ⅜" BSP (M), 10mm compression, x ½" BSP (M), 12mm compression, x ¼" BSP (M), 12mm compression, x ⅜" BSP (M), 12mm compression, x ½" BSP (M), 15mm compression, x ¼" BSP (M), 15mm compression, x ⅜" BSP (M), 15mm compression, x ½" BSP (M), 15mm compression, x ¾" BSP (M), 18mm compression, x ½" BSP (M), 22mm compression, x ½" BSP (M), 22mm compression, x ¾" BSP (M), 22mm compression, x 1" BSP (M), 28mm compression, x ¾" BSP (M), 28mm compression, x 1" BSP (M), 28mm compression, x 1-¼" BSP (M), 35mm compression, x 1-¼" BSP (M), 42mm compression, x 1-½" BSP (M), 54mm compression, x 2" BSP (M). AF07 female elbows-CxFI parallel: 6mm compression, x ¼" BSP (F), 6mm compression, x ⅜" BSP (F), 8mm compression, x ¼" BSP (F), 8mm compression, x ⅜" BSP (F), 10mm compression, x ¼" BSP (F), 10mm compression, x ½" BSP (F), 10mm compression, x ⅜" BSP (F), 12mm compression, x ¼" BSP (F), 12mm compression, x ⅜" BSP (F), 12mm compression, x ½" BSP (F), 15mm compression, x ¼" BSP (F), 15mm compression, x ⅜" BSP (F), 15mm compression, x ½" BSP (F), 15mm compression, x ¾" BSP (F), 18mm compression, x ½" BSP (F), 22mm compression, x ½" BSP (F), 22mm compression, x ¾" BSP (F), 22mm compression, x 1" BSP (F), 28mm compression, x ¾" BSP (F), 28mm compression, x 1" BSP (F), 28mm compression, x 1-¼" BSP (F), 35mm compression, x 1-¼" BSP (F), 42mm compression, x 1-½" BSP (F), 54mm compression, x 2" BSP (F). AF08 wallplate elbows-CxFI: 12mm compression, x ⅜" BSP (F), 15mm compression, x ½" BSP (F), 22mm compression, x ¾" BSP (F), 22mm compression, x ½" BSP (F), 28mm compression, x 1" BSP (F). AF08 equal tees-CxCxC: 6 - 54mm compression. AF08R reducing tees-CxCxC: 15 x 15 x 10mm compression, 15 x 15 x 22mm compression, 22 x 15 x 15mm compression, 22 x 15 x 22mm compression, 22 x 22 x 15mm compression, 22 x 22 x 28mm compression, 28 x 15 x 28mm compression, 28 x 22 x 28mm compression, 28 x 22 x 22mm compression, 28 x 28 x 15mm compression, 28 x 28 x 22mm compression, 35 x 35 x 15mm compression, 35 x 35 x 22mm compression, AF09 threaded centre teesCxCxFI: 15mm compression, x 15mm compression, x ¼" BSP (F), 15mm compression, x 15mm compression, x ½" BSP (F), 22mm compression, x 22mm compression, x ½" BSP (F), 22mm compression, x 22mm compression, x ¾" BSP (F), 28mm compression, x 28mm compression, x ¾" BSP (F), 28mm compression, x 28mm compression, x 1" BSP (F). AF10 threaded end tees CxFIxC: 15mm compression, x ½" BSP (F) x 15mm compression, 22mm compression, x ¾" BSP (F) x 22mm compression, AF12 stopends-C: 6 - 54mm compression. AF14 straight tap connectors: 15mm compression, x ½" BSP (F), 15mm compression, x ¾" BSP (F), 22mm compression, x ¾" BSP (F), 22mm compression, x 1" BSP (F). AF15 bent tap connectors: 15mm compression, x ½" BSP (F). Models added January 2026 CL35032H048G0 Olive P/R 8MM BRASS OLIVES PK10 8mm CL35032H049G0 Olive P/R 10MM BRASS OLIVES PK10 10mm CL35032H050G0 Olive P/R 15MM BRASS OLIVES PK10 15mm CL35032H051G0 Olive P/R 22MM BRASS OLIVES PK10 22mm CL35032H052G0 Olive PR 28MM BRASS OLIVES PK10 28mm

Approval Holder:

Hangzhou DOZ Import & Export Co., Ltd

Company Name

Hangzhou DOZ Import & Export Co., Ltd

Address

Room 302, Binke Mansion, No. 1503, Xipu Road, Binjiang District, Hangzhou Zhejiang 310053

Country

China

Phone

86 571 28180555

View All Listings by this Company

Manufacturer:

Hangzhou DOZ Import & Export Co., Ltd

Company Name

Hangzhou DOZ Import & Export Co., Ltd

Address

Room 302, Binke Mansion, No. 1503, Xipu Road, Binjiang District, Hangzhou Zhejiang 310053

Country

China

Phone

86 571 28180555

View All Listings by this Company