Directory Search Results

Print List

#2204023

A range of blue epoxy coated steel reverse rinsing fine filters with a stainless-steel sieve and an EDPM O-ring. Supplied with two pressure gauges and metal ball valve on the drain. Maximum working pressure 16 bar. Maximum operating temperature 40°C.

Section:
1050 Filters and Housings
Size:
DN65, DN80 or DN100 Flanged (Replaces XX in the model code).
Marking:
Resideo, Braukmann, Model name, PN, DN and other technical information on adhesive label on body.
Installation Requirements:
R001 R110 R150 R170 R511
Expiry date:
30/04/2027
Model:
F78TS-XXFY Y denotes the mesh size of the filter and can be replaced with any of the following: A = 100μm, B = 20μm, C = 50μm, D = 200μm.
Product Images

Approval Holder:
Pittway Sarl
Company Name
Pittway Sarl
Address
A3 - ZA La Pièce 6 1180 Rolle
Country
Switzerland

View All Listings by this Company
Manufacturer:
Ademco 1 GmbH
Company Name
Ademco 1 GmbH
Address
Hardhofweg 40, 7481 Mosbach
Country
Germany

View All Listings by this Company

Print This Approval


#2205057

Range of medical sterilised water filter cartridges with plastic bodies and EPDM ‘O’-Rings. Models MTFW-SLSS / MTFD-SLSS incorporate a check valve cartridge on the inlet, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum Working Temperature: 50°C.

Section:
1050 Filters and Housings
WRAS Approval Number:
2205057
Note:
Open Outlet Use Only. Claims made by the manufacturer have not been tested and are not considered part of the approval listing.
Marking:
Pentair, model code and technical information on adhesive label located on body.
Installation Requirements:
R001 R120 R150 R170
Expiry date:
31/05/2027
Model:
MSF-SLSS: Medical Shower Filter Sterilised Starter Set (Connection 1/2" BSP/NPT M) MSF-SLRC: Medical Shower Filter Sterilised Replacement Cartridge (Connection Quick Release) MTFW-SLSS: Medical Tap Filter Drinking Sterilised Starter Set (Connection 1/2" F BSP/NPT) MTFD-SLRC: Medical Tap Filter Drinking Sterilised Replacement Cartridge (Connection Quick Release) MTFD-SLSS: Medical Tap Filter Drinking Sterilised Starter Set (Connection 1/2" F BSP/NPT) MTFD-SLRC: Medical Tap Filter Drinking Sterilised Replacement Cartridge (13.68mm Connection Quick Release)
Product Images

Approval Holder:
Fileder Filter Systems Ltd.
Company Name
Fileder Filter Systems Ltd.
Address
20/20 BUSINESS PARK, MAIDSTONE, KENT
Postcode
ME16 0LS
Country
United Kingdom
Phone
01622 621940
General Email
jasmine@fileder.co.uk

View All Listings by this Company

Print This Approval


#2112025

ERA-01 range of SDR11 and SDR17 polyethylene butt welded fittings for use with ERA-02 range of SDR11 and SDR17 PE 100 pipe. SDR11 rated pipe and fittings have a maximum working pressure of 16.0 bar. SDR17 rated pipe and fittings have a maximum working pressure of 10.0 bar. For above and below ground use. Cold water use only.

Section:
1100 Fittings and Pipe - Compatible Systems
Section Subtitle:
Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2112025
Size:
SDR11 pipe and fittings = DN75 – DN315. SDR17 pipe and fittings = DN160 – DN315.
Marking:
‘ERA®’ and technical information on pipe and fitting.
Installation Requirements:
R001
Expiry date:
31/12/2026
Model:
ERA-01 range of fittings (90° elbow, 45° elbow, flange, cross, straight tee, reducing cross, reducing tee, end cap and reducing socket) for use with ERA-02 pipe.
Product Images

Approval Holder:
ERA Piping (Zhejiang) Co.,Ltd.
Company Name
ERA Piping (Zhejiang) Co.,Ltd.
Address
No.1118 Huangjiao Road, Huangyan Economic Development Zone, Taizhou, Zhejiang
Country
China

View All Listings by this Company
Manufacturer:
ERA Piping (Zhejiang) Co.,Ltd.
Company Name
ERA Piping (Zhejiang) Co.,Ltd.
Address
No.1118 Huangjiao Road, Huangyan Economic Development Zone, Taizhou, Zhejiang
Country
China

View All Listings by this Company

Print This Approval


#2205306

Ebco Poly B range of compression fittings with gunmetal bodies, for use with PE80 pipe (manufactured to BS EN 12201). For above and below ground use. Maximum working pressure 12.5 bar. Cold water use only.

Section:
1120 Fittings for use with Tube and Pipe
Section Subtitle:
Compression, metal, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2205306
Size:
20mm - 63mm.
Marking:
Ebco (a brand name of Talis UK Ltd), body cast date (MM/YY) and foundry ID on body
Installation Requirements:
R001
Expiry date:
31/05/2027
Model:
Ebco Poly B range of fittings comprising of: Couplings: GCB20,GCB2025, GCB2032, GCB25, GCB2532,GCB2550, GCB32, GCB3263, GCB5020, GCB5032, GCB63, GCB6320, GCB6325, GCB6350, GCB50, GCB3220& GCB3225. Tees: GTB20, GTB25, GTB2520R, GTB32, GTB3220R, GTB3225R GTB50, GTB5020R, GTB5025R, GTB5032R, GTB6332, GTB6350R & GTB63. Elbows: GEB20, GEB25, GEB32, GEB3225R, GEB50 & GEB63. Adaptors: GAB2F20, GAB2M20, GAB3F25, GAB3M25, GAB4M32, GAB6F50, GAB6M50, GAB6M63, GAB8M63, GAB4F32 & GAB8F63. Joint Reducers: GJR2520B, GJR3225B.
Product Images

Approval Holder:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company
Manufacturer:
Atlantic Plastics Ltd.
Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company

Print This Approval


#2202903

Single flush pneumatically operated drop valve with a rubber seating washer and ABS body. The valve is operated by a separate push button assembly.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2202903
Size:
2” BSP Outlet
Marking:
Dudley on adhesive label on valve body
Installation Requirements:
R001
Expiry date:
28/02/2027
Model:
Pinto Valve

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 35 of 202

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.