'Himod Flat Seal 15'. Grey coloured, fibre/NBR gasket material manufactured by calendaring. For use with water up to 85°C. For use only as a jointing/gasket material having been tested at a reduced surface area to volume ratio.

Section:

5075 Fibre

Section Subtitle:

These materials are for use only as a jointing/gasket material having been tested at reduced surface area to volume ratio.

WRAS Approval Number:

2011513

Expiry date:

30/11/2025

Approval Holder:

Trelleborg Sealing Solutions Germany GmbH.

Company Name

Trelleborg Sealing Solutions Germany GmbH.

Address

Schockenriedstrasse 1, 70565 Stuttgart, Germany

View All Listings by this Company

'Extrastrong Ivory Coloured (RAL 1015) Tank Panel'. Cream coloured, hot press moulded GRP panel. For use with water up to 50°C.

Section:

5120 Glass Reinforced Plastics (GRP)

Section Subtitle:

Components.

WRAS Approval Number:

2010521

Expiry date:

31/10/2025

Approval Holder:

Extra Co Fibre Glass & Prefab Houses LLC

Company Name

Extra Co Fibre Glass & Prefab Houses LLC

Address

Green Belt Street Industrial Area No 11 PO Box 6174

Country

Sharjah

Phone

+971 6 5332538 Fax: +971 6 5331381

View All Listings by this Company

'Aldex C800 Na (16-50 US mesh resin), Aldex C800x10 Na (16-50 US mesh resin), Aldex C800F (Na) (30-70 US mesh resin) & Aldex C800F (K) (30-70 US mesh resin)'. Ion exchange resins which are black coloured except C800F (Na) which is brown coloured. For use with water up to 23°C.

Section:

5150 Ion Exchange Resin

Expiry date:

31/10/2025

Approval Holder:

Aldex Chemical Company Limited

Company Name

Aldex Chemical Company Limited

View All Listings by this Company

'RADILON® DT RV300RKC2 106 NT to RADILON® DT RV500RKC2 106 NT and RADILON® DT RV300RKC2 306 BK to RADILON® DT RV500RKC2 306 BK'. Natural (appears off-white in colour) or black, injection moulded glass fibre filled PA6.12 materials. For use with water up to 85°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2010544

Expiry date:

31/10/2025

Approval Holder:

Radici Novacips SpA

Company Name

Radici Novacips SpA

Country

Italy

View All Listings by this Company

‘TECHNYL ® SAFE D 219WFC V30 BK’ & ‘TECHNYL ® SAFE D 219WFC V50 BK’. Black coloured, injection moulded, glass fibre reinforced polyamide 6.10 materials. For use with water up to 85°C.

Section:

5180 Nylon

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2012504

Expiry date:

31/12/2025

Approval Holder:

Polytechnyl S.A.S. Member of DOMO Chemicals

Company Name

Polytechnyl S.A.S. Member of DOMO Chemicals

View All Listings by this Company

'POLYPOL-1005'. Light orange coloured, contact moulded unsaturated polyester resin material. For use with water up to 50°C.

Section:

5217 Polyester

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2101501

Expiry date:

31/01/2026

Approval Holder:

Polychem Resins International Industries LLC

Company Name

Polychem Resins International Industries LLC

Address

PO Box 37029, Jebel Ali Industrial Area, Phase-1, Dubai

Country

United Arab Emirates

View All Listings by this Company

'PolyPol-1023'. Yellow coloured, contact moulded, isophthalic, unsaturated polyester resin material. For use with water up to 23°C.

Section:

5217 Polyester

Section Subtitle:

Material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2010543

Expiry date:

31/10/2025

Approval Holder:

Polychem Resins International Industries LLC

Company Name

Polychem Resins International Industries LLC

Address

PO Box 37029, Jebel Ali Industrial Area, Phase-1, Dubai

Country

United Arab Emirates

View All Listings by this Company

'Elofit'. Black coloured, injection moulded, PE100 electrofusion & spigot fittings. For use with water up to 85°C.

Section:

5240 Polyethylene

Section Subtitle:

Components. All components listed in this section have been tested for water contact suitability of material only.

WRAS Approval Number:

2009539

Expiry date:

30/09/2025

Approval Holder:

NUPI Industrie Italiane SpA

Company Name

NUPI Industrie Italiane SpA

Address

Via S. Ferrario, 8, 21052 Busto Arsizio (VA)

Country

Italy

View All Listings by this Company

'Kuzeyboru HDPE 100 Pipe'. Black coloured, extruded HDPE pipe. For use with water up to 23°C.

Section:

5240 Polyethylene

Section Subtitle:

Components. All components listed in this section have been tested for water contact suitability of material only.

WRAS Approval Number:

2011518

Expiry date:

30/11/2025

Approval Holder:

Kuzeyboru A.S.

Company Name

Kuzeyboru A.S.

View All Listings by this Company

'SAB A16 Compression Fittings'. Black coloured, compression fitting bodies, injection moulded from polypropylene (PP-B). For use with water up to 60°C.

Section:

5260 Polypropylene

Section Subtitle:

Components.

WRAS Approval Number:

2010519

Expiry date:

31/10/2025

Approval Holder:

Sab SpA

Company Name

Sab SpA

Address

Via Salvo D'acquiso, 61048 Sant'Angelo In Vado (PU)

Country

Italy

View All Listings by this Company