Range of commercial washing machines with flow controlled by solenoid valve and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). The products are supplied with three ¾” x ¾” BSP (F) double check valve assemblies (suitable for backflow protection against Fluid Category 3) for installation on each inlet prior to a HDPE inlet hose with ¾” x ¾” captive nut end connections. Maximum working pressure 5.7 Bar. Maximum operating temperature 60°C.

Section:

2370 Washing Machines

Section Subtitle:

Clothes. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

WRAS Approval Number:

2106021

Expiry date:

30/06/2026

Note:

This appliance incorporates a Fluid Category 5 backflow prevention device. The double check valve assemblies supplied with this product must be installed on all available inlets to maintain the validity of the WRAS approval. No detergents, softeners or other products are to be placed within the dispenser compartment that represent a risk greater than Fluid Category 3.

Size:

¾” BSP (F) (to double check valve assembly)

Marking:

Alliance Laundry logo, model, serial number, product info on label on back panel. Alliance laundry logo, model, serial number on label inside of door.

Installation Requirements:

R001 R160 R574

Model:

UCEXXX, SCEXXX, HCEXXX, ICEXXX & PCEXXX XXX denotes the drum capacity and can be replaced with the following digits representing lb’s: 020, 030, 040, 060, 080 & 100.

Factor:

Alliance Laundry CE s.r.o

Company Name

Alliance Laundry CE s.r.o

Address

Místecká 1116, 742 58 Príbor

Phone

+420 556 768 885

View All Listings by this Company

Range of commercial front loading washing machines with flow controlled by solenoid valve and discharged via a type AD air gap arrangement (verified by test - suitable for backflow protection against fluid category 5). The product is supplied with a single check valve assembly (suitable for backflow protection against Fluid Category 2) and PEX lined rubber inlet connections hoses. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C

Section:

2370 Washing Machines

Section Subtitle:

Clothes. Washing machines in this section will indicate the category of backflow prevention built into each appliance. The location and the use of the washing machine will determine any additional backflow protection that may be required.

WRAS Approval Number:

2201070

Expiry date:

31/01/2027

Size:

¾” BSP captive nut (to inlet hoses)

Marking:

Alliance CE & company details, model and other information on adhesive label on body

Installation Requirements:

R001

Model:

WM75***** C & WM85***** C RANGE OF WASHING MACHINES

Factor:

Alliance Laundry CE s.r.o

Company Name

Alliance Laundry CE s.r.o

Address

Místecká 1116, 742 58 Príbor

Phone

+420 556 768 885

View All Listings by this Company