Range of resilient seated gate valves with blue epoxy coated ductile iron body and an EPDM coated ductile iron wedge. Maximum working pressure 16.0 bar. Maximum operating temperature 70°C.
Range of globe stop valves with a bronze bodies, brass stems and stem ring. The valves are operated via a rising spindle with a hand wheel operating member. Maximum working pressure 20 bar. Maximum operating temperature 85°C
Range of screw down stop valves with brass or DZR brass bodies. Valves incorporate EPDM seat washers and PTFE seals. Maximum working pressure: 16 bar. Maximum operating temperature: 95°C
Range of electronically controlled ion exchange water softeners (salt regenerated) for commercial and domestic use. Maximum working pressure 5.0 bar. Cold water use.
'KH24AC'. Black coloured, compression moulded, phenolic resin impregnated carbon/graphite disc component. For use with water up to 85°C.
'Shalipoxy 400'. Factory applied, two-part beige coloured epoxy coating. Mix component A & B in a 3:1 volume ratio and apply as per manufacturer’s Application Methodology ‘R&D/AIN 004/2013’, dated ’01.05.2013’. Cure for 7 days@27°C. For use with water up to 23°C. his material is only approved for the mixing and curing conditions that appear on the approval. If the mixing and/or curing conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'ShaliPoxy 400 FG'. Factory applied, white coloured, two-component epoxy coating. Mix components A & B in a volume ratio of 3:1 and apply as per manufacturer’s TDS ‘0982019’. Cure for 7 days@27°C. For use with water up to 23°C. This material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'PROTEGOL UR Coating 32-45'. Factory applied, two-part, blue coloured, Polyurethane coating. Mix parts A and B in a 3:1 volume ratio and apply as per manufacturer's Application Instructions dated '06/2025'. Cure for 24 hours@23°C until a shore hardness of 70 D is reached. For use with water up to 65°C. his material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'PROTEGOL UR Coating 32-69 MB'. Factory applied, two-part, blue coloured, Polyurethane coating. Mix parts A and B in a 1:1 volume ratio and apply as per manufacturer's Application Instructions '06/2025'. Cure for 24 hours@23°C until a shore hardness of 70 D is reached. For use with water up to 65°C. his material is only approved for the mixing and curing conditions that appear on the approval. If the mix and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'SF2400/2800'. Green coloured, nitrile rubber/aramid material manufactured by calendering. For use with water up to 23°C. For use only as a jointing/gasket material having been tested at a reduced surface area to volume ratio.
Grivory GV-2H natural & GV-2H black 9915. GV-2 FWA natural & GV-2 FWA black 9225. GV-4H natural & GV-4H black 9915. GV-4 FWA natural & GV-4 FWA black 9225. GV-5H natural & GV-5H black 9915. GV-5 FWA natural, GV-5 FWA black 9225 & Grivory XE 4275 black 9225. GV-6H natural & GV-6H black 9915. GV-6 FWA natural & GV-6 FWA black 9225. Injection moulded, natural (appears white) or black coloured, glass reinforced nylon materials. For use with water up to 23°C.
'BADATRON PPS GF40 WL BLACK'. Black coloured, injection moulded, glass fibre reinforced PPS material. For use with water up to 85°C.
'DURAFIDE® PPS 1140A1 WN9050'. Black coloured, injection moulded PPS material. For use with water up to 85°C.
'Cosmoplast 4-Layer, PPR-FG-PPR-UV Resistance Pipes' and 'Cosmoplast PPR-FG-PPR FASER Pipes’. Extruded, multi-layered PPR pipes. 'Cosmoplast 4-Layer, PPR-FG-PPR-UV Resistance Pipe' comprises of a green coloured inner layer, transparent second layer, green coloured third layer and black coloured outer layer. 'Cosmoplast PPR-FG-PPR FASER Pipe’ comprises of a green coloured inner layer, transparent second layer, and green coloured outer layer. For use with water up to 85°C.
‘RSG-TW-BWGL, RSG-TW-V-BWGL & RSG-TW-K-BWGL’. Black coloured, compression moulded EPDM sheet materials. Shore hardness 70. Tested in-radius size 1.15mm. For use with water up to 85°C.
'03154-70'. Black coloured, compression moulded NBR material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.
'SQ-30T-W, SQ-40T-W, SQ-50T-W, SQ-60T-W, SQ-70T-W, SQ-80T-W, & SQ-90T-W (transparent, unpigmented)'. ‘SQ-30R-W, SQ-40R-W, SQ-50R-W, SQ-60R-W, SQ-70R-W, SQ-80R-W, & SQ-90R-W (red coloured)'. ‘SQ-30B-W, SQ-40B-W, SQ-50B-W, SQ-60B-W, SQ-70B-W, SQ-80B-W, & SQ-90B (blue coloured)'. Range of compression moulded, silicone rubber materials. Shore hardness between 30 & 90. Tested in-radius size 0.9mm. For use with water up to 85°C:
'Weld-On 724 UL VOC CPVC Cement Orange'. Orange coloured solvent cement. Apply as per manufacturer's TDS '724-05-2024'. Cure for 4 hours@5°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
Range of smart Bidet assemblies with sensor actuated solenoid valves and discharged via a type `AB` airgap (verified by test - suitable for backflow protection against fluid category 5). Maximum working pressure 8.0 Bar Maximum operating temperature Cold water use only
Bidet seat assembly which discharges via a sensor actuated solenoid valve and utilises a ‘Type AD’ air gap arrangement (verified by test -suitable for backflow prevention against Fluid Category 5). The inlet incorporates a strainer and flow regulator and is pumped from an internal water storage cistern via a heating unit to various outlet nozzle arrangements. Maximum working pressure 10 bar. Cold water supply only.
Page 325 of 326
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
