Directory Search Results

Print List

#2104902

BS EN 997:2018 RAK Compact Rimless Wall Hung 700mm COMRIMWH W.C. pan (Ceramic), Thomas Dudley ‘A’ frame incorporating a Thomas Dudley Vantage Concealed cistern with a side entry compact type float operated inlet valve which discharges via a Type AG airgap and a dual flush pneumatic drop valve capable of full flush volumes of 4.5 litres and a reduced flush of 3 litres. The inlet connection hose incorporates a servicing valve. Maximum working pressure 10.0 bar. Cold water use only.

Section:
2041 WC suites
Section Subtitle:
Low level WC incorporating a Type AUK1 air gap backflow prevention arrangement. The product incorporates a fluid category 5 backflow prevention arrangement.
WRAS Approval Number:
2104902
Size:
15mm Push-fit Inlet connection.
Marking:
Inspection covers marked Thomas Dudley Ltd. Top of outlet drop valve marked ‘TD’, Corner of wall hung pan marked ‘RAK CERAMICS’
Installation Requirements:
R001 R559
Expiry date:
30/04/2026
Model:
RAK Compact Rimless Wall Hung 700mm COMRIMWH W.C. pan and Thomas Dudley Illusion A or Illusion Compact Universal Frame

Approval Holder:
Ruddy Joinery & Fit-Out Specialists
Company Name
Ruddy Joinery & Fit-Out Specialists
Postcode
MK45 5BS

View All Listings by this Company

Print This Approval


#2201028

Double check valve assembly consisting of two spring loaded resilient trim in-line check valve cartridges housed in a DZR brass body with a drain port located between the cartridges. For use with copper pipe manufactured to BS EN1057. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
2201028
Size:
15mm compression
Marking:
BARBERI logo (‘B’ within a hexagon), CR, MM15 and flow arrow on body.
Installation Requirements:
R001
Expiry date:
31/01/2027
Model:
172015000.
Product Images

Approval Holder:
Barberi Rubinetterie Industriali Srl
Company Name
Barberi Rubinetterie Industriali Srl
Address

View All Listings by this Company

Print This Approval


#2105322

‘Calomax Eclipse’ range of electrically heated counter top or wall mounted catering water boilers. The boilers incorporate a stainless steel cold water feed cistern which has a combined vent/overflow fitted with an insect screen. The water to the cistern is supplied via a solenoid valve which incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The water level is electronically controlled via level sensors. The water is dispensed via a manually operated brass bodied (chrome plated)/stainless steel bodied self-closing tap(s) or a push button controlling a solenoid valve prior to the outlet. The counter top models are supplied with a PVC coated flexible inlet hose (¾” BSP (F) x 15mm standpipe) and a push fit adaptor (15mm push fit x ¾ BSP (F)). Maximum working pressure 10.0 bar (to the solenoid valve). Maximum temperature of dispsensed water 90°C for PB3C10 & PB3W5 models and 97°C for all other models. Cold water supply only.

Section:
0060 Boilers
Section Subtitle:
Catering, Feed Cistern or Pressure.
WRAS Approval Number:
2105322
Note:
R150 does not apply to models with a capacity of 15 litres or less (models 2W3, 3W5, PB3W5, 3W7.5, 3W10 & 3C5C).
Size:
¾” BSP (M) (to solenoid valve)
Marking:
Calomax, model code, serial number and technical information on adhesive label body.
Installation Requirements:
R001 R040 R150
Expiry date:
31/05/2026
Proviso:
Where the overflow is directed away from the appliance for connection to a drain, this discharge to drain must be via a type `AA`, `AB` or `AD` airgap, or in accordance with EN1717.
Model:
Counter top models dispensing tap: 3C5C (5 litres rapid draw off). 3C10 (10 litres rapid draw off). Counter top models dispensing high tap: HT3C10 (10 litres rapid draw off). HT3C20 (20 litres rapid draw off). HT6C20 (20 litres rapid draw off). Counter top models push button: PB3C10 (10 litres rapid draw off). Wall mounted models Dispensing tap: 2W3 (3 litres rapid draw off). 3W5 (5 litres rapid draw off). 3W7.5 (7.5 litres rapid draw off). 3W10 (10 litres rapid draw off). 3W15C (15 litres rapid draw off). Wall mounted models Push button: PB3W5 (5 litres rapid draw off).

Approval Holder:
Calomax Ltd
Company Name
Calomax Ltd
Address
Lupton Avenue Leeds
Postcode
LS9 7DD
Country
United Kingdom
Phone
0113 2496681
General Email
sales@calomax.co.uk

View All Listings by this Company
Manufacturer:
Calomax Ltd
Company Name
Calomax Ltd
Address
Lupton Avenue Leeds
Postcode
LS9 7DD
Country
United Kingdom
Phone
0113 2496681
General Email
sales@calomax.co.uk

View All Listings by this Company

Print This Approval


#2109363

Single hole, single outlet deck mounted (fixed) combination tap assembly with soap dispenser and hand dryer appliances operated via an infra-red sensor. This product incorporates a solenoid valve and plastic flow restrictor. Maximum working pressure 10.0 bar. Maximum operating temperature 50°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2109363
Note:
This product may not comply with the requirements of regulation 4(1)(b). Consult your local water undertaker prior to installation.
Size:
½” BSP (M)
Marking:
Wallgate logo (W) on fascia of tap.
Installation Requirements:
R001 R006 R009 R570
Expiry date:
30/09/2026
Model:
THRII-TAP+D ( Deck mounted)
Product Images

Approval Holder:
Wallgate Ltd.
Company Name
Wallgate Ltd.
Address
Crow Lane Salisbury
Postcode
SP2 0HB
Country
United Kingdom
Phone
01722 702058
General Email
jmarshall@wallgate.com

View All Listings by this Company
Manufacturer:
Wallgate Ltd.
Company Name
Wallgate Ltd.
Address
Crow Lane Salisbury
Postcode
SP2 0HB
Country
United Kingdom
Phone
01722 702058
General Email
jmarshall@wallgate.com

View All Listings by this Company

Print This Approval


#2109372

Single hole, single outlet wall mounted (fixed) combination tap assembly with soap dispenser and hand dryer appliances operated via an infra-red sensor. This product incorporates a solenoid valve and plastic flow restrictor. Maximum working pressure 10.0 bar. Maximum operating temperature 50°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
2109372
Note:
This product may not comply with the requirements of regulation 4(1)(b). Consult your local water undertaker prior to installation.
Size:
½” BSP (M)
Marking:
Wallgate logo (W) on fascia of tap.
Installation Requirements:
R001 R009 R040 R570
Expiry date:
30/09/2026
Model:
THRII-TAP+W (Wall mounted)

Approval Holder:
Wallgate Ltd.
Company Name
Wallgate Ltd.
Address
Crow Lane Salisbury
Postcode
SP2 0HB
Country
United Kingdom
Phone
01722 702058
General Email
jmarshall@wallgate.com

View All Listings by this Company
Manufacturer:
Wallgate Ltd.
Company Name
Wallgate Ltd.
Address
Crow Lane Salisbury
Postcode
SP2 0HB
Country
United Kingdom
Phone
01722 702058
General Email
jmarshall@wallgate.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 33 of 192

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.