Directory Search Results

Print List

#240602701

Range of wall hung concealed WC flushing cisterns with a BS 1212-4 float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a push button assembly. Maximum working pressure - 10 Bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
240602701
Size:
½” BSP (M)
Marking:
Ecotech logo and model name on cover, 6 litre line inside cistern
Installation Requirements:
R001 R280 R556 R581
Expiry date:
30/06/2029
Model:
B685 B695

Approval Holder:
ECO (Xiamen) Technology INC.
Company Name
ECO (Xiamen) Technology INC.

View All Listings by this Company
Manufacturer:
ECO (Xiamen) Technology INC.
Company Name
ECO (Xiamen) Technology INC.

View All Listings by this Company

Print This Approval


#240602715

Range of wall hung concealed WC flushing cisterns with a BS 1212-4 float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a push button assembly. Maximum working pressure - 10 Bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
240602715
Size:
½” BSP (M)
Marking:
WRAS & Flomasta on cover, 6 litre line inside cistern.
Installation Requirements:
R001 R280 R556 R581
Expiry date:
30/06/2029
Model:
C10100857 C10100856

Approval Holder:
Kingfisher International Products B.V
Company Name
Kingfisher International Products B.V
Address
Rapenburgerstraat 175E, 1011 VM Amsterdam
Country
Netherlands

View All Listings by this Company

Print This Approval


#240602716

Range of wall hung concealed WC flushing cisterns with a BS 1212-4 float operated inlet valve providing a Type AG air gap arrangement and a dual flush outlet valve. The flush volume is operated by a push button assembly. Maximum working pressure - 10 Bar. Cold water use only.

Section:
2035 Cistern - Flushing
Section Subtitle:
Incorporating Type AG air gap, providing fluid category 3 backflow protection. Suitable for use in a WC suite. Additional tests will need to be performed if required to demonstrate Type AUK1 air gap.
WRAS Approval Number:
240602716
Size:
½” BSP (M)
Marking:
Flomasta & WRAS on cover, 6 litre line inside cistern.
Installation Requirements:
R001 R280 R556 R581
Expiry date:
30/06/2029
Model:
C10100857 C10100856

Approval Holder:
Kingfisher International Products Ltd
Company Name
Kingfisher International Products Ltd
Address
1 Paddington Square, London
Postcode
W2 1GG
Phone
07721 260713
General Email
eric.capotummino@kingfisher.com

View All Listings by this Company

Print This Approval


#240704706

Spring loaded in-line check valve cartridges for insertion into pipes and fittings with specifically sized bores. Maximum working pressure 16.0 bar. Maximum operating temperature 65°C.

Section:
0026 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Check Valve Cartridge. The cartridges listed in this section are for factory installation only and are not suitable for on-site installation.
WRAS Approval Number:
240704706
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
DN50
Marking:
Neoperl, WRAS & DN on body
Installation Requirements:
R001
Expiry date:
31/07/2029
Model:
31.4251.0 NV50/DN50 & 31.0020.0; NV50/DN50-EPDM.

Approval Holder:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company
Manufacturer:
Neoperl GmbH
Company Name
Neoperl GmbH
Address
Klosterrunstrasse 9-11, Müllheim
Postcode
D-79379
Country
Germany
Phone
+49 7631 188 374
General Email
DE.Approvals@neoperl.com

View All Listings by this Company

Print This Approval


#240704728

Range of non-verifiable double check valve assemblies, consisting of two spring loaded resilient trim in-line check valve cartridges housed in DZR brass bodies with a drain port located between the cartridges. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C

Section:
0034 Backflow Prevention Devices
Section Subtitle:
SCHEDULE 2 - Section 6.2 Type ED - Non-verifiable double check valve.
WRAS Approval Number:
240704728
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
see model
Marking:
IDC etched on body. Size, flow arrow mould on body.
Installation Requirements:
R001
Expiry date:
31/07/2029
Model:
1CVB006 15mm compression, 1CVB008 22mm compression 1CVB010 28mm compression MODELS ADDED JANUARY 2026 1CVBk006 15mm compression 1CVBk006P 15mm compression (Nickel plated) 1CVBk008 22mm compression 1CVBk010 28mm compression

Manufacturer:
IDC Plumbing & Heating Technology (Beijing) Co., Ltd.
Company Name
IDC Plumbing & Heating Technology (Beijing) Co., Ltd.
Address
3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing
Postcode
100015
Country
China
Phone
008610 51659550 ext 312

View All Listings by this Company

Print This Approval


#240704050

AXOR UNO Range of single-hole, single outlet, (fixed) over the rim bidet combination tap assemblies, (brass bodies – various finishes). Incorporating ceramic cartridge headworks with single lever or dome type operating members. The spout outlets incorporate plastic aerators. The products are supplied with lever operated pop-up waste (not verified by test). Maximum operating pressure 10 bar. Maximum operating temperature 60°C

Section:
0400 Combination Tap Assemblies - Bidet
Section Subtitle:
Single hole bidet tap(s) with a single outlet fixed spout with swivel nozzle.
WRAS Approval Number:
240704050
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating 3/8” BSP captive nut end connections.
Marking:
AXOR on operating member
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/07/2029
Model:
38 211 xx0 45 200 xx0

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#240702031

Range of quarter turn ceramic disc or non-rising spindle headworks (see models) with brass bodies and EPDM `O` rings for insertion into specifically dimensioned bores. Maximum working pressure; 10 Bar Maximum operating temperature 85°C.

Section:
0440 Headworks
Section Subtitle:
Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
WRAS Approval Number:
240702031
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1/2" BSP (M)
Marking:
Avonflow, WRAS and date of manufacture (DD/MM/YY) on body
Installation Requirements:
R001
Expiry date:
31/07/2029
Model:
¼ Turn Ceramic Modes: C06029H005A-X C06029H006A-X C06029H007A-X TTDMCV2-X Non Rising Spindle Models: TT13CV2-X TC06V2 Where X denotes the closing direction and water supply, and can be replaced with either: C = Cold water, clockwise closing H = Hot water, anti-clockwise closing

Approval Holder:
JIANGXI AVONFLOW HVAC TECH CO., LTD.
Company Name
JIANGXI AVONFLOW HVAC TECH CO., LTD.
Address
Xuri Area Shangrao Economic Development Zone, Jiangxi Province

View All Listings by this Company
Manufacturer:
JIANGXI AVONFLOW HVAC TECH CO., LTD.
Company Name
JIANGXI AVONFLOW HVAC TECH CO., LTD.
Address
Xuri Area Shangrao Economic Development Zone, Jiangxi Province

View All Listings by this Company

Print This Approval


#241002079

Range of ceramic cartridge headworks with plastic bodies and silicone rubber gaskets for insertion into specifically dimensioned bores. Maximum working pressure 10.0 Bar Maximum operating temperature 90.0°C

Section:
0440 Headworks
Section Subtitle:
Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
WRAS Approval Number:
241002079
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
See models
Marking:
WANHAI logo, WRAS, model and date of manufacture (DD/MM/YYYY) on body
Installation Requirements:
R001
Expiry date:
31/10/2029
Model:
W-25OP (Ø25mm) 35D-3 (Ø35mm)

Approval Holder:
Ningbo Wanhai Cartridge Technology Co. Ltd.
Company Name
Ningbo Wanhai Cartridge Technology Co. Ltd.
Address
Xiachen Development Zone, Chunhu, Fenghua
Country
Zhejiang, China

View All Listings by this Company

Print This Approval


#240702065

Range of ceramic cartridge headworks with plastic bodies, some of which include a diverter function. For insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C

Section:
0440 Headworks
Section Subtitle:
Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
WRAS Approval Number:
240702065
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Diverter versions Ø28mm, Ø35mm & Ø40 mm. Rotary versions Ø28mm & Ø35mm.
Marking:
KEROX and date of manufacture (DDMMYY) on body
Installation Requirements:
R001
Expiry date:
31/07/2029
Model:
KXYY ZZ V WWW K = Kerox. X = type: D = Diverter & R = Rotary (Rotary version only available up to Ø35mm). YY = FUNCTION: Z = with closed position, N = with open position only; J = open to right, CJ = open to right, customized cartridge, B = open to left. ZZ = SIZE (Cartridge diameters): 35=Ø35 mm; 28= Ø28 mm; 40=Ø40 mm. V= bottom base type: A = Flat bottom, two locating pins, B = Extended bottom, two locating pins, C = Flat bottom, one locating pin. WWW = other options: HT = half turn, 180° range, HWS= hot water stop (sequential mixer).

Approval Holder:
Kerox Ltd.
Company Name
Kerox Ltd.
Address
Kerox u. 1. Sóskút
Country
Hungary
Phone
+36 23 560 700/150 ext.
General Email
evaszlauko@kerox.net

View All Listings by this Company
Manufacturer:
Kerox Ltd.
Company Name
Kerox Ltd.
Address
Kerox u. 1. Sóskút
Country
Hungary
Phone
+36 23 560 700/150 ext.
General Email
evaszlauko@kerox.net

View All Listings by this Company

Print This Approval


#240704015

Range of quarter turn ceramic disc headworks with plastic or brass bodies, for insertion into specifically dimensioned bores. Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:
0440 Headworks
Section Subtitle:
Headwork(s) for installation into specifically dimensioned taps or shower valve bodies.
WRAS Approval Number:
240704015
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
see model
Marking:
Hassem, WRAS on headwork body
Installation Requirements:
R001
Expiry date:
31/07/2029
Model:
HSD-D021 - 18.3mmOD QE-380 - 17.6mmOD QE-381 - 18.3mmOD

Approval Holder:
Kaiping Hassem Sanitary Ware Co. Ltd.
Company Name
Kaiping Hassem Sanitary Ware Co. Ltd.

View All Listings by this Company
Manufacturer:
Kaiping Hassem Sanitary Ware Co. Ltd.
Company Name
Kaiping Hassem Sanitary Ware Co. Ltd.

View All Listings by this Company

Print This Approval


#240704009

Thermostatic cartridges with a plastic body and stainless-steel strainer mesh. For insertion into specifically dimensioned bores. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
0442 Thermostatic cartridges
Section Subtitle:
Thermostatic cartridge(s) for installation into specifically dimensioned tap or shower valve bodies.
WRAS Approval Number:
240704009
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
31.6mm.
Marking:
Vernet and batch number moulded and etched on cartridge.
Installation Requirements:
R001
Expiry date:
31/07/2029
Model:
VT28 Cartridges: VT28-001, VT28-002, VT28-004, VT28-008, VT28-009, VT28-010.

Approval Holder:
VERNET GROUP
Company Name
VERNET GROUP
Address
21-27 route d’Arpajon Ollainville – BP31 ARPAJON
Postcode
91291
Country
France
General Email
roze@vernet.fr

View All Listings by this Company
Manufacturer:
VERNET GROUP
Company Name
VERNET GROUP
Address
21-27 route d’Arpajon Ollainville – BP31 ARPAJON
Postcode
91291
Country
France
General Email
roze@vernet.fr

View All Listings by this Company

Print This Approval


#250202001

Range of thermostatic cartridges for insertion into specifically dimensioned bores. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
0442 Thermostatic cartridges
Section Subtitle:
Thermostatic cartridge(s) for installation into specifically dimensioned tap or shower valve bodies.
WRAS Approval Number:
250202001
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
34mm (HW34) and 36mm (HW36) OD
Marking:
WANHAI, WRAS, model number and date of manufacture (YYYY/MM/DD) on body.
Installation Requirements:
R001
Expiry date:
28/02/2030
Model:
HW34 & HW36

Approval Holder:
Ningbo Wanhai Cartridge Technology Co. Ltd.
Company Name
Ningbo Wanhai Cartridge Technology Co. Ltd.
Address
Xiachen Development Zone, Chunhu, Fenghua
Country
Zhejiang, China

View All Listings by this Company

Print This Approval


#240702057

Range of single hole, single outlet (swivel) combination tap assemblies (brass body – various finishes), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet is a pull-out spray type. Maximum working pressure 10.0 Bar. Maximum operating temperature 65.0°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
240702057
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless-steel braided PEX lined inner hose assemblies with 1/2" BSP captive nut end connections.
Marking:
Lanbiao on body.
Installation Requirements:
R001 R009 R090
Expiry date:
31/07/2029
Model:
F1029** F1035** ** denotes the finish and can be replaced with any of the following: H: black, N: nickel brushed, GJS: gold brushed, G: gold, QTSL: Bronze brushed bright, QTS: Bronze brushed matt, TJ: Titanium gold, TJLS: Titanium gold brushed, MGJ: rose gold, MGJL: rose gold brushed, HGT: Red bronze, HTL: yellow bronze brushed, HTS: Red bronze brushed, PVDQH: grey, HQ: grey brushed, Q: bronze, DYB: matte white, STS: acid copper brushed, BZ: perl white painted, B: matte white painted

Approval Holder:
Taizhou Lanbiao Sanitary Ware Co., Ltd
Company Name
Taizhou Lanbiao Sanitary Ware Co., Ltd
Address
XUDOU VILLAGE QINGGANG YUHUAN ZHEJIANG
Postcode
317600
Country
China
Phone
13736601565
General Email
984458082@qq.com

View All Listings by this Company
Manufacturer:
Taizhou Lanbiao Sanitary Ware Co., Ltd
Company Name
Taizhou Lanbiao Sanitary Ware Co., Ltd
Address
XUDOU VILLAGE QINGGANG YUHUAN ZHEJIANG
Postcode
317600
Country
China
Phone
13736601565
General Email
984458082@qq.com

View All Listings by this Company

Print This Approval


#240704033

Range of single hole, single outlet (swivel) combination tap assemblies with brass bodies (various finishes), incorporating ceramic cartridge headworks and single lever operating members. The spout outlet incorporates a pull-down spray with a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0445 Combination Tap Assemblies
Section Subtitle:
Tap(s) incorporating a pull-out/pull down spray where the airgap cannot be maintained after motive force is removed.
WRAS Approval Number:
240704033
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX lined hose assemblies incorporating ½” BSP captive nut end connections.
Marking:
Lanbiao etched on operating member.
Installation Requirements:
R001 R009 R010 R090
Expiry date:
31/07/2029
Model:
F1214-** Pull down kitchen mixer. ‐**Represents the following different surface treatments: 1. H‐Black 2. N‐ Nickel Brushed 3. GJS‐ Zirconium gold brushed 4. G‐ Zirconium gold 5. QTSL‐ Brushed bronze bright 6. QTS‐Brushed Bronze Matte 7. TJ‐ Titanium 8. TJLS‐ Titanium brushed 9. MGJ‐ Rose gold 10. MGJL‐ Rose gold brushed 11. HGT‐ Red bronze 12. HTL‐ Brushed brass 13. HTS‐ Brushed copper 14. PVDQH‐Gun Ash 15. HQ‐Gun Ash Brushed 16. Q‐Bronze 17. DYB‐Electrophoresis Matt White 18. STS‐Acid copper brushed 19. BZ‐Spray pearl white 20. B‐Spray matt white 21. DMGJ‐ Light Rose Gold

Approval Holder:
Taizhou Lanbiao Sanitary Ware Co., Ltd
Company Name
Taizhou Lanbiao Sanitary Ware Co., Ltd
Address
XUDOU VILLAGE QINGGANG YUHUAN ZHEJIANG
Postcode
317600
Country
China
Phone
13736601565
General Email
984458082@qq.com

View All Listings by this Company
Manufacturer:
Taizhou Lanbiao Sanitary Ware Co., Ltd
Company Name
Taizhou Lanbiao Sanitary Ware Co., Ltd
Address
XUDOU VILLAGE QINGGANG YUHUAN ZHEJIANG
Postcode
317600
Country
China
Phone
13736601565
General Email
984458082@qq.com

View All Listings by this Company

Print This Approval


#240404061

Single hole, single outlet (fixed) combination tap assemblies (chromium plated brass), incorporating a single sequential headwork with a single lever operating member. The spout outlet incorporates a plastic flow straightener. The product is supplied with DZR brass adaptors for installation on each inlet. The adaptor incorporates a stainless-steel strainer and a check valve cartridge, verified by test (suitable for backflow protection against Fluid Category 2). Maximum working pressure 5.0 bar. Maximum operating temperature 65°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
240404061
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” captive nut end connections + 15mm (compression to adaptor).
Marking:
SANCERAM ON OPERATING MEMBER
Installation Requirements:
R001 R006 R009 R010
Expiry date:
30/04/2029
Model:
SCBW120.

Approval Holder:
The Sanitaryware Company
Company Name
The Sanitaryware Company
Address
Montagu Court Kettering Venture Park Kettering Parkway
Postcode
NN15 6XR
Country
Kettering

View All Listings by this Company

Print This Approval


#240702007

Range of single hole, single outlet (fixed) combination tap assemblies (brass body - various finishes) incorporating a ceramic cartridge headwork with single lever operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 10.0 Bar. Maximum operating temperature 60.0°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
240702007
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX lined hose assemblies, incorporating 3/8" BSP captive nut end connections.
Marking:
Villeroy & Boch Logo on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/07/2029
Model:
TVW126003000xx, TVW126001000xx. xx can be replaced by: 61 = Chrome, 74 = Brushed Chrome, 63 = Graphite, 64 = Brushed Nickel matt, 65 = Polished Nickel, 60 = English Gold, 76 = Brushed Gold, 70 = Dune, K5 = Matt black.

Approval Holder:
Villeroy & Boch AG
Company Name
Villeroy & Boch AG
Address
Saaruferstraße 1-3 Mettlach
Postcode
66693
Country
Germany
Phone
+49 151 16775778
General Email
Finkler.Marc@villeroy-boch.com

View All Listings by this Company

Print This Approval


#240702021

Range of single-hole, single outlet (fixed) combination tap assemblies (brass bodies – various finishes), incorporating ceramic cartridge headworks with single lever operating members. The spout outlet incorporates a plastic aerator. The products are supplied with click type pop up waste (verified by test). Maximum working pressure 5.0 Bar. Maximum operating temperature 60°C

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
240702021
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided PEX lined flexible hose assemblies incorporating ½” BSP captive nut end connections.
Marking:
Lota on front of body
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/07/2029
Model:
63681-70X 63684-70X 63687-70X 63443-71X X denotes finish. 0107 chrome, 0004 brushed nickel, 4408 brushed brass, 6801 matt black, 4403 brushed brass light, 0402 brushed nickel PVD, 5804 heirloom silver, 0408 brushed stainless steel

Approval Holder:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No. 61 Xing Nan Road Jimei District Xiamen
Postcode
361022
Country
China
General Email
liwenjuan@lota.com.cn

View All Listings by this Company
Manufacturer:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No. 61 Xing Nan Road Jimei District Xiamen
Postcode
361022
Country
China
General Email
liwenjuan@lota.com.cn

View All Listings by this Company

Print This Approval


#240704017

Single hole, single outlet (fixed) combination tap assembly (chromium plated brass) incorporating a ceramic cartridge headwork with single lever type operating member. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
240704017
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
Stainless steel braided, PEX lined hose assemblies with 3/8” BSP (F) captive nut connection.
Marking:
Lota on body.
Installation Requirements:
R001 R006 R009 R010
Expiry date:
31/07/2029
Model:
67918-5001

Approval Holder:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No. 61 Xing Nan Road Jimei District Xiamen
Postcode
361022
Country
China
General Email
liwenjuan@lota.com.cn

View All Listings by this Company
Manufacturer:
Xiamen Lota International Co., Ltd.
Company Name
Xiamen Lota International Co., Ltd.
Address
No. 61 Xing Nan Road Jimei District Xiamen
Postcode
361022
Country
China
General Email
liwenjuan@lota.com.cn

View All Listings by this Company

Print This Approval


#241203001

Single hole, single outlet fixed combination tap assemblies (chrome plated brass body), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet incorporates a stainless steel filter. The product is supplied with a click type pop-up waste (verified by test). Maximum operating pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
241203001
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
The product is supplied with a click type pop-up waste (verified by test).
Size:
Stainless steel braided EPDM lined flexible hose assemblies incorporating ½” BSP captive nut end connections.
Marking:
Bristan on body.
Installation Requirements:
R001 R006 R010 R160
Expiry date:
31/12/2029
Model:
BQINV BAS C

Approval Holder:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

Print This Approval


#240703012

Single hole, single outlet fixed combination tap assembly (chrome plated brass body), incorporating quarter turn ceramic disc headworks with cross-top operating members. The spout outlet incorporates a plastic flow straightener. The product is supplied with a lever operated pop-up waste (not verified by test) Maximum operating pressure 10.0 bar. Maximum operating temperature 65°C.

Section:
0450 Combination Tap Assemblies
Section Subtitle:
Single hole tap(s) with a single outlet and a fixed spout.
WRAS Approval Number:
240703012
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
The product is supplied with a lever operated pop-up waste (not verified by test)
Size:
15mm Coppertails
Marking:
Bristan on indices
Installation Requirements:
R001 R006 R010
Expiry date:
31/07/2029
Model:
K BAS C Model added February 2026: RP3 K BAS C

Approval Holder:
Bristan Group Ltd.
Company Name
Bristan Group Ltd.
Address
Birch Coppice Business Park Dorden Tamworth
Postcode
B78 1SG
Country
United Kingdom
Phone
01827 254144
General Email
hmistry@bristan.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 306 of 522

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.