‘ISR’ range of copper, DZR brass or gunmetal capillary, lead free solder ring and threaded fittings for use with copper pipe. For above ground use only. Maximum working pressure 16.0 bar. Maximum working temperatures 99°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2010800

Size:

See model

Marking:

BSI Kitemark, size and Pegler logo (brand of Aalberts) on body

Installation Requirements:

R001

Expiry date:

31/10/2025

Model:

YP1 - Straight Coupling: copper x copper - 6mm - 67mm YP1 IM - Slip Adaptor Coupling: imperial copper x metric copper - ½" x 15mm - 1½" x 42mm YP1R - Reducing Straight Coupling: copper x copper 8mm x 6mm - 54mm x 42mm YP1 Slip - Slip Straight Coupling: copper x copper - 15mm, 22mm, 28mm YP2 - Straight Female Connector: copper x BSP: [Parallel Female Thread] 8mm x ¼" - 54mm x 2" YP2LC - Female reducing connector: [reduced BSP female end] - 15mm x ¼", 15mm x ⅜", 22mm x ½" YP2LI - Female reducing connector: [reduced copper end] - ¾" x 15mm YP3 - Straight male connector: [copper x BSP taper male thread] - 8mm x ¼" - 67mm x 2½" YP3LC - Male reducing connector: [reduced BSP male end] - 15mm x ¼" - 28mm x ¾" YP3LI - Male reducing connector: [reduced copper end] - 3/4" x 15mm, 1" x 22mm YP5 - Tank connector: copper x BSP [parallel male thread] - 15mm x ½" - 54mm x 2" YP5FC - Tank connector: copper x BSP [parallel male thread] - 15mm x ½", 22mm x ¾", 28mm x 1" YP6 - Reducer: [Larger end for insertion into fitting] - 8mm x 6mm - 67mm x 54mm YP7 - Female adaptor:[male copper for insertion into fitting x BSP parallel female thread] 15mm x ½" - 54mm x 2" YP8 - Male adaptor: [male copper for insertion into fitting x BSP taper male thread] - 15mm x ½" - 54mm x 2" YP9 - Adaptor: [imperial female copper x metric male copper] - ½" x 15mm - 2" x 54mm YP9B - Non-standard adaptor - ½" 17G x 15mm YP99 - Adaptor: [Metric or imperial female copper x male copper] - 15mm x ½" - 42mm x 1½" YP11 - Union Coupling: [copper x copper] - 15mm - 67mm YP12 - Elbow: [copper x copper] - 6mm - 67mm YP12R - Reducing Elbow: [copper x copper] - 22mm x 15mm, 28mm x 22mm YP12S - Street Elbow: [Female copper x Male copper] - 8mm - 42mm YP13 - Male Elbow: [copper x BSP taper male thread] - 15mm x ½" - 42mm x 1½" YP14 - Female Elbow: [copper x BSP parallel female thread] - 15mm x ½", 22mm x ¾", 28mm x 1" YP14LC - Reducing Female Elbow: [Reduced female end] - 22mm x ½" YP15 - Backplate Elbow: [copper x BSP parallel female thread] - 15mm x ½", 22mm x ¾" YP15LN - Backplate Elbow: [Extended nose and circular backplate] - 15mm x ½" YP18 - Slow Bend: [copper x copper] - 15mm, 22mm, 28mm YP20 - Return Bend: [copper x copper] - 15mm, 22mm, 28mm YP21 - Obtuse Elbow: [copper x copper] - 15mm - 67mm YP22 - Partial Crossover: [female copper x male copper] - 15mm, 22mm YP23 - Full Crossover: [copper x copper] - 15mm, 22mm YP24 - Equal Tee: [All ends for copper] - 6mm - 67mm YP24 Slip - Equal Tee, Slip pattern: [All ends for copper] - 15mm YP25 - Tee, Reduced Branch: [All ends for copper] - 22mm x 22mm x 10mm - 67mm x 67mm x 28mm YP26 - Tee, One End Reduced: [All ends for copper] - 22mm x 15mm x 22mm - 54mm x 42mm x 54mm YP27 - Tee, One End and Branch Reduced: [All ends for copper] - 22mm x 15mm x 15mm - 54mm x 42mm x 42mm YP28 - Tee, Both Ends Reduced: [All ends for copper] - 15mm x 15mm x 22mm - 35mm x 35mm x 42mm YP29 - Female Tee: [Copper end and Copper branch x reduced BSP parallel female end] - 15 x ½" x 15mm, 22 x ¾" x 22mm YP29R - Female Tee: [Copper end and Copper branch x reduced BSP parallel female end] - 22mm x ½" x 22mm, 28mm x ½" x 28mm, 35mm x ½" x 35mm YP30 - Female Tee: [Copper ends x BSP parallel female branch] - 15mm x 15mm x ½", 22mm x 22mm x ¾", 28mm x 28mm x 1" YP30BP - Backplate Tee: [Copper ends x BSP parallel female branch. Circular backplate] - 15mm x 15mm x ½" YP30R - Female Tee: [Copper ends x reduced BSP parallel female branch] 15mm x 15mm x ¼" - 42mm x 42mm x 1/2" YP37 - Sweep Tee, 90°: [All ends for copper] - 15mm, 22mm, 28mm YP37R - Sweep Tee, 90°: [Reduced branch] - 22mm x 22mm x 15mm, 28mm x 28mm x 15mm YP50 - Cross: [All ends for copper] - 15mm, 22mm YP61 - Stop End: [For use on copper tube] - 8mm - 54mm YP35 - Air Vent Tee: [YP37 Sweep Tee plus Air-Release Valve RV35] - 15mm RV35 - Air-Release Valve: [Male copper end suitable for use in any capillary socket] - 15mm YP62 - Tap Connector: [copper x BSP union nut. Spigot and washer joint] - 15mm x ½" - 22mm x ¾" YP63 - Bent Tap Connector: [copper x BSP union nut. Spigot and washer joint] - 15mm x ½" - 22mm x ¾" YP63L - Long Bent Tap Connector: [copper x BSP union nut. Spigot and washer joint] - 15mm x ½" YP64 - Bent union adaptor: [copper x BSP union nut] - 22mm x 1", 28mm x 1¼" YP65 - Bent male union connector: [copper x BSP taper male thread] - 15mm x ½" - 42mm x 1½" YP65R - Bent Boiler union: [copper x BSP taper male thread] - 22mm x 1" YP68 - Union adaptor: [copper x BSP union nut] - 15mm x ¾", 22mm x 1", 28mm x 1¼" YP68CL - Union adaptor: [copper x BSP union nut. Spigot and fibre washer joint] - 15mm x ¾", 22mm x 1", 28mm x 1¼" YP68CLDZR - Union adaptor: [copper x BSP union nut. Spigot and fibre washer joint] with DZR nuts - 15mm x ¾" YP68FF - Flat Faced Union adaptor: [copper x BSP union nut] Suitable for use with water meters. - 15mm x ¾", 22mm x 1" YP68M - Meter union connector: [copper x BSP union nut] Suitable for use with water meters. - 22mm x ¾" YP69 - Straight male union connector: [copper x BSP taper male thread] - 15mm x ½" - 54mm x 2" YP69DP - Straight male union connector: with 104mm dip pipe. - 22mm x ¾" YP69F - Straight female union connector: [copper x BSP parallel female thread] - 15mm x ½" - 54mm x 2" YP69P - Straight male union connector: [copper x BSP parallel male thread] - 15mm x ½", 22mm x ¾", 28mm x 1", 67mm x 2½" YP70 - Male nipple: [union thread x BSP taper male thread] - ½" x ⅜", ¾" x ½", 1" x ¾", 1¼" x 1" YP70P - Male nipple: [union thread x BSP taper male thread] For use with YP64 and YP68 - ¾" x ½", 1" x ¾" YP71 - Male nipple: [union thread x BSP taper male thread] equal ends. - ½" , ¾", 1" YP72 - Female nipple: [union thread x BSP parallel female thread] - ¾" x ½" - 2½" x 2" YP115 - Extension nipple: [Used to give extra length to female ends on YP14, YP15, YP30] - ½" - ¾"

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company

Range of copper solder ring fittings for use with EN 1057 copper tube. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2006314

Size:

8mm – 54mm 3/8” – 2”

Marking:

Double winners logo (db over W) on body.

Installation Requirements:

R001

Expiry date:

30/06/2025

Model:

SR5270, SR5090, SR5092, SR5301,SR5240, SR5243, SR5040, SR5041, SR5130R, SR55130R, SR5062, SR5063, SR5271, SR5085, SR5086, SR5270S. All fittings are for use with copper pipe to EN 1057.

Approval Holder:

Taizhou Double Winners Copper Co., Ltd

Company Name

Taizhou Double Winners Copper Co., Ltd

Address

#2‐902, Z Center, No. 185 Wenxue Road, Jiaojiang, Taizhou, 31800, Zhejiang, China

View All Listings by this Company

Manufacturer:

Taizhou Double Winners Copper Co., Ltd

Company Name

Taizhou Double Winners Copper Co., Ltd

Address

#2‐902, Z Center, No. 185 Wenxue Road, Jiaojiang, Taizhou, 31800, Zhejiang, China

View All Listings by this Company

Range of copper solder ring fittings for use with EN 1057 copper tube. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2006078

Size:

8mm – 54mm 3/8” – 2”

Marking:

FLOMASTA (BRAND OF KINGFISHER) & SIZE ON BODY

Installation Requirements:

R001

Expiry date:

30/06/2025

Model:

SR5270, SR5090, SR5092, SR5301,SR5240, SR5243, SR5040, SR5041, SR5130, SR5130R, SR5062, SR5063, SR5271, SR5085, SR5086, SR5270S. All fittings are for use with copper pipe to EN 1057.

Approval Holder:

Kingfisher International Products Ltd.

Company Name

Kingfisher International Products Ltd.

Address

3 Sheldon Square Paddington, London

Postcode

W2 6PX

View All Listings by this Company

‘CB ISR’ range of capillary fittings with internal solder rings, DZR brass or gunmetal capillary, lead free solder ring and threaded fittings for use with copper pipe. For above ground use only. Maximum working pressure 16.0 bar. Maximum working temperatures 99°C.

Section:

1115 Fittings for use with Tube and Pipe

Section Subtitle:

Capillary, solder ring, lead free. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2010805

Size:

See model

Marking:

BSI Kitemark, size and company logo "w" on body

Installation Requirements:

R001

Expiry date:

31/10/2025

Model:

543901 * CB ISR STRAIGHT COUPLING 8MM 543902 * CB ISR STRAIGHT COUPLING 10MM 543903 * CB ISR STRAIGHT COUPLING 15MM 543904 * CB ISR STRAIGHT COUPLING 22MM 543905 * CB ISR STRAIGHT COUPLING 28MM 543906 * CB ISR STRAIGHT COUPLING 35MM 543907 * CB ISR STRAIGHT COUPLING 42MM 543908 * CB ISR STRAIGHT COUPLING 54MM 543913 * CB ISR SLIP STRAIGHT COUPLING 15MM 543914 * CB ISR SLIP STRAIGHT COUPLING 22MM 543923 * CB ISR ADAPTOR COUPLING 22MMX3/4 543924 * CB ISR REDUCING COUPLING 22MMX15MM 543925 * CB ISR REDUCING COUPLING 28MMX22MM 543933 * CB ISR FI STRAIGHT CONNECTOR 15MMX1/2 543943 * CB ISR MI STRAIGHT CONNECTOR 15MMX1/2 543944 * CB ISR MI STRAIGHT CONNECTOR 22MMX3/4 543945 * CB ISR MI STRAIGHT CONNECTOR 28MMX1 543952 * CB ISR REDUCER 10MMX8MM 543953 * CB ISR REDUCER 15MMX8MM 543954 * CB ISR REDUCER 15MMX10MM 543955 * CB ISR REDUCER 22MMX15MM 543956 * CB ISR REDUCER 28MMX15MM 543957 * CB ISR REDUCER 28MMX22MM 543963 * CB ISR 90D ELBOW 8MM 543964 * CB ISR 90D ELBOW 10MM 543965 * CB ISR 90D ELBOW 15MM 543966 * CB ISR 90D ELBOW 22MM 543967 * CB ISR 90D ELBOW 28MM 543968 * CB ISR 90D ELBOW 35MM 543969 * CB ISR 90D ELBOW 42MM 543970 * CB ISR 90D ELBOW 54MM 543973 * CB ISR 90D STREET ELBOW 15MM 543974 * CB ISR 90D STREET ELBOW 22MM 543975 * CB ISR 90D STREET ELBOW 28MM 543976 * CB ISR 90D STREET ELBOW 35MM 543977 * CB ISR 90D STREET ELBOW 42MM 543983 * CB ISR 45D ELBOW 15MM 543984 * CB ISR 45D ELBOW 22MM 543985 * CB ISR STOP END 28MM 543986 * CB ISR STOP END 35MM 543987 * CB ISR STOP END 42MM 543988 * CB ISR STOP END 54MM 543991 * CB ISR STOP END 8MM 543992 * CB ISR STOP END 10MM 543993 * CB ISR STOP END 15MM 543994 * CB ISR STOP END 22MM 543995 * CB ISR 45D ELBOW 28MM 543996 * CB ISR 45D ELBOW 35MM 543997 * CB ISR 45D ELBOW 42MM 543998 * CB ISR 45D ELBOW 54MM 544113 * CB ISR EQUAL TEE 15MM 544114 * CB ISR EQUAL TEE 22MM 544115 * CB ISR EQUAL TEE 28MM 544116 * CB ISR EQUAL TEE 35MM 544117 * CB ISR EQUAL TEE 42MM 544118 * CB ISR EQUAL TEE 54MM 544123 * CB ISR REDUCING TEE 22MMX22MMX15MM 544124 * CB ISR REDUCING TEE 28MMX28MMX15MM 544125 * CB ISR REDUCING TEE 28MMX28MMX22MM 544126 * CB ISR REDUCING TEE 22MMX15MMX22MM 544127 * CB ISR REDUCING TEE 28MMX22MMX28MM 544133 * CB ISR REDUCING TEE 15MMX15MMX22MM 544134 * CB ISR REDUCING TEE 22MMX15MMX15MM 544135 * CB ISR REDUCING TEE 35MMX35MMX15MM 544136 * CB ISR REDUCING TEE 35MMX35MMX22MM 544137 * CB ISR REDUCING TEE 35MMX35MMX28MM 544138 * CB ISR REDUCING TEE 42MMX42MMX15MM 544139 * CB ISR REDUCING TEE 42MMX42MMX22MM 544140 * CB ISR REDUCING TEE 42MMX42MMX28MM 544141 * CB ISR REDUCING TEE 42MMX42MMX35MM 544142 * CB ISR REDUCING TEE 54MMX54MMX15MM 544143 * CB ISR FI TEE 15MMX15MMX1/2 544144 * CB ISR REDUCING TEE 54MMX54MMX22MM 544145 * CB ISR REDUCING TEE 54MMX54MMX28MM 544146 * CB ISR REDUCING TEE 54MMX54MMX35MM 544147 * CB ISR REDUCING TEE 54MMX54MMX42MM 544148 * CB ISR REDUCER 35MMX15MM 544149 * CB ISR REDUCER 35MMX22MM 544150 * CB ISR REDUCER 35MMX28MM 544151 * CB ISR REDUCER 42MMX15MM 544152 * CB ISR REDUCER 42MMX22MM 544153 * CB ISR STR TAP CONNECTOR 15MMX1/2 544154 * CB ISR STR TAP CONNECTOR 15MMX3/4 544155 * CB ISR STR TAP CONNECTOR 22MMX3/4 544156 * CB ISR BENT TAP CONNECTOR 15MMX1/2 544157 * CB ISR REDUCER 42MMX28MM 544158 * CB ISR REDUCER 42MMX35MM 544159 * CB ISR REDUCER 54MMX15MM 544160 * CB ISR REDUCER 54MMX22MM 544161 * CB ISR REDUCER 54MMX28MM 544162 * CB ISR REDUCER 54MMX35MM 544163 * CB ISR REDUCER 54MMX42MM 544164 * CB ISR STR UNION ADAPTOR 22MMX1 544173 * CB ISR BACKPLATE ELBOW 15MMX1/2

Approval Holder:

Wolseley UK Ltd.

Company Name

Wolseley UK Ltd.

Address

2 Kingmaker Court, Warwick Technology Park, Warwick

Postcode

CV34 6DY

Country

United Kingdom

Phone

01926705792

General Email

martin.lister@wolseley.co.uk

View All Listings by this Company

Range of brass compression fittings for use with copper pipe. Above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1150 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, metal, for use with copper tube - above ground use only.

WRAS Approval Number:

2006013

Marking:

Eagle, EN standard and size on nut

Installation Requirements:

R001

Expiry date:

30/06/2025

Model:

6301-1, 6301-2, 6301-3, 6301-4, 6301-5, 6301-6, 6301-10, 6301-21, 6301-31, 6301-32, 6301-41,6301-42, 6301-43, 6301-51, 6301-52, 6301-53, 6301-54, 6301-61, 6301-62, 6301-63, 6301-64, 6301-65, 6301-B, 6301-0, 6301-0B, 6301-1B. 6302-1, 6302-2, 6302-3, 6302-4, 6302-5, 6302-6, 6302-B & 6302-0. 6302F-1, 6302F-2, 6302F-3, 6302F-4, 6302F-5 & 6302F-6. 6302LB-1, 6302LB-2 & 6302LB-3. 6302T-1, 6302T-2 & 6302T-3. 6303-1, 6303-2, 6303-3, 6303-4, 6303-5, 6303-6, 6303-B & 6303-0. 6303SW-1, 6303SW-21, 6303SW-2 & 6303SW-12, 6303T-1, 6303T-2 & 6303T-3. 6321-1, 6321-2, 6321-3, 6321-4, 6321-5 & 6321-6. 6323-1, 6323-2, 6323-3, 6323-4, 6323-5, 6323-6, 6323-B & 6323-0. 6401E-1, 6401E-2 & 6401E-3. 6401-1, 6401-2, 6401-3, 6401-4, 6401-5, 6401-6, 6401-B, 6401-0, 6401-10, 6401-21, 6401-31 & 6401-32. 6402-1, 6402-2, 6402-3, 6402-4, 6402-5, 6402-6, 6402-B & 6402-0. 6402T-1 & 6402T-2. 6403-1, 6403-2, 6403-3, 6403-4, 6403-5, 6403-6, 6403-B & 6403-0. 6403SW-1 & 6403SW-2. 6403T-1, 6403T-2 & 6403T-3. 6403WE-1-3H & 6403WE-2-3H. 6601-1, 6601-2, 6601-3, 6601-4, 6601-5, 6601-6, 6601-B & 6601-0. 6601-001, 6601-100, 6601-101, 6601-110, 6601-112, 6601-113, 6601-211, 6601-212, 6601-221, 6601-223, 6601-311, 6601-312, 6601-313, 6601-322, 6601-323, 6601-331, 6601-332, 6604-441, 6601-442, 6601-443, 6601-551, 6601-552, 6601-553, 6601-554, 6601-661, 6601-662, 6601-663, 6601-664 & 6601-665. 6615-1, 6615-2 & 6615-3. 6617-1, 6617-2 & 6617-3. 6901-1, 6901-2, 6901-3, 6901-2121 & 6901-2211. 36301-1, 36301-2, 36301-3, 36301-4, 36301-5, 36301-6, 36301-10, 36301-21, 36301-31, 36301-32, 36301-41, 36301-42, 36301-43, 36301-51, 36301-52, 36301-53, 36301-54, 36301-61, 36301-62, 36301-63, 36301-64, 36301-65 & 36301-1B. 36302-1, 36302-2, 36302-3, 36302-4, 36302-5 & 36302-6. 36302F-1, 36302F-2, 36302F-3, 36302F-4, 36302F-5 & 36302F-6. 36302LB-1, 36302LB-2 & 36302LB-3. 36302T-1, 36302T-2 & 36302T-3. 36303-1, 36303-2, 36303-3, 36303-4, 36303-5 & 36303-6. 36303SW-1, 36303SW-21, 36303SW-2 & 36303SW-12. 36303T-1, 36303T-2 & 36303T-3. 36321-1, 36321-2, 36321-3, 36321-4, 36321-5 & 36321-6. 36323-1, 36323-2, 36323-3, 36323-4, 36323-5 & 36323-6. 36401E-1, 36401E-2 & 36401E-3. 36401-1, 36401-2, 36401-3, 36401-4, 36401-5, 36401-6, 36401-10, 36401-21, 36401-31 & 36401-32. 36402-1, 36402-2, 36402-3, 36402-4, 36402-5 & 36402-6. 36402T-1 & 36402T-2. 36403-1, 36403-2, 36403-3, 36403-4, 36403-5 & 36403-6. 36403SW-1 & 36403SW-2. 36403T-1, 36403T-2 & 36403T-3. 36403WE-1-3H & 36403WE-2-3H. 36601-1, 36601-2, 36601-3, 36601-4, 36601-5 & 36601-6. 36601-001, 36601-100, 36601-101, 36601-110, 36601-112, 36601-113, 36601-211, 36601-212, 36601-221, 36601-223, 36601-311, 36601-312, 36601-313, 36601-322, 36601-323, 36601-331, 36601-332, 36604-441, 36601-442, 36601-443, 36601-551, 36601-552, 36601-553, 36601-554, 36601-661, 36601-662, 36601-663, 36601-664 & 36601-665. 36615-1, 36615-2 & 36615-3. 36617-1, 36617-2 & 36617-3. 36901-1, 36901-2, 36901-3, 36901-2121 & 36901-2211

Approval Holder:

SCE Technology (Ningbo) Co.,Ltd.

Company Name

SCE Technology (Ningbo) Co.,Ltd.

Address

No.32 Yuanqu Road Cha Lu Industrial Zone Ninghai Zhejiang

Country

China

View All Listings by this Company

Manufacturer:

SCE Technology (Ningbo) Co.,Ltd.

Company Name

SCE Technology (Ningbo) Co.,Ltd.

Address

No.32 Yuanqu Road Cha Lu Industrial Zone Ninghai Zhejiang

Country

China

View All Listings by this Company

Range of compression fittings with polypropylene bodies, nuts, acetal grip rings, EPDM ‘O’-rings and plastic pipe liners for use with MDPE pipe manufactured to BS EN 12201. For above and below ground use. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1160 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, plastic, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2009337

Note:

The supplied pipe liners must be installed to maintain the validity of this approval.

Size:

20-63mm compression. ½”-2” BSP (M) or (F)

Marking:

Manufacturers name, size and date of manufacture (clock format) on body.

Installation Requirements:

R001

Expiry date:

30/09/2025

Model:

Couplers: 20.41.2005.020: 20mm 20.41.2005.025: 25mm 20.41.2005.032: 32mm 20.41.2005.040: 40mm 20.41.2005.050: 50mm 20.41.2005.063: 63mm Reducing Couplers: 20 41 2007 005: 25mm x 20mm 20 41 2007 009: 32mm x 20mm 20 41 2007 010: 32mm x 25mm 20 41 2007 015: 40mm x 32mm 20 41 2007 019: 50mm x 32mm 20 41 2007 020: 50mm x 40mm 20 41 2007 023: 63mm x 32mm 20 41 2007 024: 63mm x 40mm 20 41 2007 025: 63mm x 50mm Male Adaptors - Male BSP Thread: 20 41 2037 005: 20mm x ½” 20 41 2037 010: 20mm x ¾” 20 41 2037 011: 20mm x 1” 20 41 2037 015: 25mm x ½” 20 41 2037 020: 25mm x ¾” 20 41 2037 025: 25mm x 1” 20 41 2037 030: 32mm x ¾” 20 41 2037 035: 32mm x 1” 20 41 2037 040: 32mm x 1¼ 20 41 2037 042: 40mm x 1” 20 41 2037 045: 40mm x 1¼” 20 41 2037 046: 40mm x 1½” 20 41 2037 049: 50mm x 1¼” 20 41 2037 050: 50mm x 1½” 20 41 2037 052: 50mm x 2” 20 41 2037 053: 63mm x 1½” 20 41 2037 055: 63mm x 2” Female Adaptors - Female BSP Thread: 20 41 2065 005: 20mm x ½” 20 41 2065 010: 20mm x ¾” 20 41 2065 019: 25mm x ½” 20 41 2065 020: 25mm x ¾” 20 41 2065 022: 25mm x 1” 20 41 2065 033: 32mm x ½” 20 41 2065 034: 32mm x ¾” 20 41 2065 035: 32mm x 1” 20 41 2065 036: 32mm x 1¼” 20 41 2065 044: 40mm x 1” 20 41 2065 045: 40mm x 1¼” 20 41 2065 046: 40mm x 1½” 20 41 2065 049: 50mm x 1¼” 20 41 2065 050: 50mm x 1½” 20 41 2065 051: 50mm x 2” 20 41 2065 054: 63mm x 1½” 20 41 2065 055: 63mm x 2” Elbow 90°: 20 41 2001 020: 20mm 20 41 2001 025: 25mm 20 41 2001 032: 32mm 20 41 2001 040: 40mm 20 41 2001 050: 50mm 20 41 2001 063: 63mm Elbow 90° Female BSP Thread: 20 41 2002 005: 20mm x ½’ 20 41 2002 006: 20mm x ¾” 20 41 2002 009: 25mm x ½” 20 41 2002 010: 25mm x ¾” 20 41 2002 011: 25mm x 1” 20 41 2002 013: 32mm x ¾” 20 41 2002 015: 32mm x 1” 20 41 2002 019: 40mm x 1” 20 41 2002 020: 40mm x 1¼” 20 41 2002 025: 50mm x 1½” 20 41 2002 026: 50mm x 2” 20 41 2002 030: 63mm x 2” Elbow 90° Male BSP Thread: 20 41 2085 005: 20mm x ½” 20 41 2085 006: 20mm x ¾” 20 41 2085 009: 25mm x ½” 20 41 2085 010: 25mm x ¾” 20 41 2085 011: 25mm x 1” 20 41 2085 014: 32mm x ¾” 20 41 2085 015: 32mm x 1” 20 41 2085 016: 32mm x 1¼” 20 41 2085 019: 40mm x 1” 20 41 2085 020: 40mm x 1¼” 20 41 2085 021: 40mm x 1½” 20 41 2085 022: 40mm x 2” 20 41 2085 022: 50mm x 1¼” 20 41 2085 025: 50mm x 1½” 20 41 2085 026: 50mm x 2” 20 41 2085 029: 63mm x 1½” 20 41 2085 030: 63mm x 2” Tee Male BSP Threaded: 20 41 2086 005: 20mm x ½” 20 41 2086 006: 20mm x ¾” 20 41 2086 009: 25mm x ½” 20 41 2086 010: 25mm x ¾” 20 41 2086 011: 25mm x 1” 20 41 2086 014: 32mm x ¾” 20 41 2086 015: 32mm x 1” 20 41 2086 019: 40mm x 1” 20 41 2086 020: 40mm x 1¼” 20 41 2086 021: 40mm x 1½” 20 41 2086 025: 50mm x 1½” 20 41 2086 026: 50mm x 2” 20 41 2086 030: 63mm x 2” Tee Female BSP Threaded: 20 41 2004 005: 20mm x ½” 20 41 2004 006: 20mm x ¾” 20 41 2004 009: 25mm x ½” 20 41 2004 010: 25mm x ¾” 20 41 2004 011: 25mm x 1” 20 41 2004 014: 32mm x ¾” 20 41 2004 015: 32mm x 1” 20 41 2004 019: 40mm x 1” 20 41 2004 020: 40mm x 1¼” 20 41 2004 021: 40mm x 1½” 20 41 2004 024: 50mm x 1¼” 20 41 2004 025: 50mm x 1½” 20 41 2004 026: 50mm x 2” 20 41 2004 030: 63mm x 2” Tee: 20 41 2003 020: 20mm 20 41 2003 025: 25mm 20 41 2003 032: 32mm 20 41 2003 040: 40mm 20 41 2003 050: 50mm 20 41 2003 063: 63mm Reducing Tee: 20 41 2004 104: 20 x 25 x 20mm 20 41 2004 105: 25 x 20 x 25mm 20 41 2004 110: 32 x 25 x 32mm 20 41 2004 115: 40 x 32 x 40mm 20 41 2004 118: 50 x 25 x 50mm 20 41 2004 119: 50 x 32 x 50mm 20 41 2004 120: 50 x 40 x 50mm 20 41 2004 122: 63 x 25 x 63mm 20 41 2004 123: 63 x 32 x 63mm 20 41 2004 124: 63 x 40 x 63mm 20 41 2004 125: 63 x 50 x 63mm End Cap: 20 41 2012 020: 20mm 20 41 2012 025: 25mm 20 41 2012 032: 32mm 20 41 2012 040: 40mm 20 41 2012 050: 50mm 20 41 2012 063: 63mm

Approval Holder:

Plimat (UK) Ltd

Company Name

Plimat (UK) Ltd

Address

Unit 7, Newmans Copse Road, Hounsdown Business Park, Totton, Southampton

Postcode

SO40 9LX

Phone

0845 055 9022

View All Listings by this Company

Range of DZR brass push fit fittings for use with copper pipe, PB pipe (manufactured to BS7291-2) & PEX pipe (manufactured to BS7291-3). When used with copper pipes the maximum working pressure is 16.0 bar. When used with plastic pipes the maximum working pressure is 6.0 bar. Maximum operating temperature 95°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2006051

Size:

15mm to 28mm pushfit. 15mm to 28mm shank. ½” to 1” BSP (M) or ½” to 1” BSP (F).

Marking:

Conex logo "B", size, DVGW and CR on socket collar.

Installation Requirements:

R001

Expiry date:

30/06/2025

Model:

BM8200G Bend Tap connector (pushfit x BSP (F); BM8002G 0150400 BM8002G 0150600 BM8002G 0160400 BM8002G 0200400 BM8002G 0220600 BM8002G 0250600 BM8002G 0260600 BM8090 Equal Elbow (pushfit x pushfit); BM8090 0150000 BM8090 0160000 BM8090 0180000 BM8090 0200000 BM8090 0220000 BM8090 0250000 BM8090 0260000 BM8090 0280000 BM8090G Female Elbow (pushfit x BSP (F)); BM8090G 0150400 BM8090G 0160400 BM8090G 0160600 BM8090G 0180400 BM8090G 0180600 BM8090G 0200600 BM8090G 0220400 BM8090G 0220600 BM8090G 0250600 BM8090G 0260600 BM8092G Male Elbow (pushfit x BSP (M)); BM8092G 0150400 BM8092G 0160400 BM8092G 0160600 BM8092G 0180400 BM8092G 0180600 BM8092G 0200600 BM8092G 0220600 BM8092G 0250600 BM8092G 0260600 BM8130 Equal Tee (pushfit x pushfit x pushfit); BM8130 0151515 BM8130 0161616 BM8130 0181818 BM8130 0201620 BM8130 0202020 BM8130 0221515 BM8130 0221522 BM8130 0221622 BM8130 0221818 BM8130 0221822 BM8130 0222215 BM8130 0222218 BM8130 0222222 BM8130 0252025 BM8130 0252525 BM8130 0262616 BM8130 0262626 BM8130 0281528 BM8130 0282228 BM8130 0282815 BM8130 0282822 BM8130 0282828 BM8130G Female Branch Tee (pushfit x BSP (F) x pushfit); BM8130G 0150415 BM8130G 0160416 BM8130G 0200420 BM8130G 0220422 BM8130G 0220622 BM8130G 0250625 BM8130G 0260626 BM8130G 0280828 BM8240 Reduced Coupling (pushfit x pushfit); BM8240 0161500 BM8240 0181500 BM8240 0201600 BM8240 0201800 BM8240 0221500 BM8240 0221800 BM8240 0252000 BM8240 0262000 BM8240 0282200 BM8240GTap Connector (pushfit x BSP (F); BM8240G 0150400 BM8240G 0150600 BM8240G 0160400 BM8240G 0200400 BM8240G 0220600 BM8240G 0250600 BM8240G 0260600 BM8240G 0260800 BM8243 range Fitting Reducer (pushfit x shank); BM8243 0181500 BM8243 0201600 BM8243 0221500 BM8243 0221800 BM8243G Straight Male Connector (pushfit x BSP (M)); BM8243G 0150400 BM8243G 0150600 BM8243G 0150800 BM8243G 0160400 BM8243G 0160600 BM8243G 0160800 BM8243G 0180400 BM8243G 0180600 BM8243G 0180800 BM8243G 0200400 BM8243G 0200600 BM8243G 0200800 BM8243G 0220600 BM8243G 0220800 BM8243G 0250400 BM8243G 0250600 BM8243G 0250800 BM8243G 0260600 BM8243G 0260800 BM8243G 0280800 BM8270 Equal Coupling (pushfit x pushfit); BM8270 0150000 BM8270 0160000 BM8270 0180000 BM8270 0200000 BM8270 0220000 BM8270 0250000 BM8270 0280000 BM8270G Straight Female Connector (BSP (F) x pushfit); BM8270G 0150400 BM8270G 0150600 BM8270G 0160400 BM8270G 0160600 BM8270G 0180400 BM8270G 0180600 BM8270G 0200400 BM8270G 0200600 BM8270G 0220400 BM8270G 0220600 BM8270G 0220800 BM8270G 0250400 BM8270G 0250600 BM8270G 0250800 BM8270G 0260600 BM8270G 0260800 BM8270G 0280800 BM8301 Stop End (pushfit x pushfit); BM8301 0150000 BM8301 0160000 BM8301 0180000 BM8301 0200000 BM8301 0220000 BM8301 0250000 BM8301 0260000 BM8301 0280000 BM8350 Tank Connector (pushfit x BSP (M)); BM8350 0150400 BM8350 0220400 BM8350 0280800 BM8472G Backplate Elbow (pushfit x BSP (F)); BM8472G 0150400 BM8472G 0160400 BM8472G 0180400 BM8472G 0180600 BM8472G 0200600 BM8472G 0220600

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Manufacturer:

IDC Plumbing & Heating Technology (Beijing) Ltd

Company Name

IDC Plumbing & Heating Technology (Beijing) Ltd

Address

3rd Floor, Unit 2, Building 2, Section A Zhaowei Science & Technology Park No. 14, Jiuxianqiao Road Chaoyang District Beijing

Postcode

100015

Country

China

Phone

008610 51659550 ext 312

General Email

Jerry.tang@idcgroup.com.cn

View All Listings by this Company

‘EPH_WSP19’ Range of brass bodied fittings for use with copper pipe, some fittings are to be soldered with copper pipe (see models). Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2007004

Size:

See model

Marking:

Size and DOZ on body

Installation Requirements:

R001

Expiry date:

31/07/2025

Model:

End Feed Fittings (Soldered): EPH_WSP19_0593 - End Feed Air Vent Cap 15mm EPH_WSP19_0608 - End Feed Wall Plate Elbow 15mm * ½” BSP (M) EPH_WSP19_0618 - End Feed Male Coupler 15mm * ½” BSP (M) EPH_WSP19_0619 - End Feed Male Coupler 15mm * ¾” BSP (M) EPH_WSP19_0625 - End Feed Male Coupler 22mm * ¾” BSP (M) EPH_WSP19_0635 - End Feed Female Coupler 15mm * ½” BSP (F) EPH_WSP19_0642 - End Feed Female Coupler 22mm * ¾” BSP (F) EPH_WSP19_0663 - End Feed Female Elbow 15mm * ½” BSP (F) EPH_WSP19_0676 - End Feed Male Elbow 15mm * ½” BSP (M) Threaded Brass fittings: Threaded Brass Blanking Nut: EPH_WSP19_0719A - ¼” BSP (F) EPH_WSP19_0720 - ⅜” BSP (F) EPH_WSP19_0721 - ½” BSP (F) - CHROME EPH_WSP19_0721A - ½” BSP (F) EPH_WSP19_0722A - ¾” BSP (F) EPH_WSP19_0723 - 1" BSP (F) Threaded Brass Male Flanged Plug: EPH_WSP19_0726 - ½” BSP (F) EPH_WSP19_0727 - ¾” BSP (F) EPH_WSP19_0724 - ¼” BSP (F) EPH_WSP19_0728 - 1" BSP (F) Threaded Brass Reducing Bush: EPH_WSP19_0747A - M-F ½” BSP (M) * ⅜" BSP (F) EPH_WSP19_0749A - M-F ¾” BSP (M) * ½” BSP (F) EPH_WSP19_0746 - M-F ½” BSP (M) * ¼” BSP (F) EPH_WSP19_0750A - M-F 1” BSP (M) * ¾” BSP (F) EPH_WSP19_0751 - M-F 1” BSP (M) * ½” BSP (F) Threaded Brass Hexagon Nipple: EPH_WSP19_0763A - M-M ½” BSP (M) * ½” BSP (M) EPH_WSP19_0764B - M-M ¾” BSP (M) * ¾” BSP (M) EPH_WSP19_0761 - M-M ¼” BSP (M) * ¼” BSP (M) EPH_WSP19_0765A - M-M 1” BSP (M) * 1” BSP (M) Threaded Brass Flanged Backnut: EPH_WSP19_0801 - ½” BSP (F) EPH_WSP19_0802A - ¾” BSP (F) Threaded Brass Female Socket: EPH_WSP19_0843 - ½” BSP (F) EPH_WSP19_0844 - ¾” BSP (F) EPH_WSP19_0841 - ¼” BSP (F) EPH_WSP19_0845 - 1” BSP (F) Threaded Brass Hexagon Nipple: EPH_WSP19_2476 - M-M ⅜” BSP (M) * ⅜” BSP (M) Tap extender: EPH_WSP19_2605 - ½” BSP (F) x ¾” BSP (M) EPH_WSP19_2609 - ¾” BSP (F) * ¾” BSP (M) Multi thread Nipple: EPH_WSP19_2599 - ¾” BSP (M) * ½” BSP (F) * 5/8” BSP (F) with rubber washer

Product Images

Approval Holder:

Hangzhou Doz Import & Export Co Ltd

Company Name

Hangzhou Doz Import & Export Co Ltd

Address

Room 302, Binke Mansion, No 1503 Xipu Road Binjiang District, Hangzhou

Country

Zhejiang,

View All Listings by this Company

Manufacturer:

Hangzhou Doz Import & Export Co Ltd

Company Name

Hangzhou Doz Import & Export Co Ltd

Address

Room 302, Binke Mansion, No 1503 Xipu Road Binjiang District, Hangzhou

Country

Zhejiang,

View All Listings by this Company

Range of rigid ductile iron couplings (copper colored alkyd enamel) (Style 606-EN), Vic-flange adapter’s (Style 641-EN) and grooved copper fittings (No. 610, 611, 620, 625, 650 & 660 –EN) for use with grooved copper tubing (manufactured to EN 1057 R250). Above ground use only. Maximum working pressure 10.0 bar. Maximum operating temperature 65°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2007027

Size:

See model

Marking:

Victaulic, size, model number and technical info on body and clamping rings.

Installation Requirements:

R001

Expiry date:

31/07/2025

Model:

Style 606-EN, Rigid Coupling for Copper: 54mm, 66.7mm, 76.1mm, 108mm, 133mm & 159 mm. Style 641-EN, Copper flange Adapter: 54mm, 66.7mm, 76.1mm (4xM16), 76.1mm (8xM16), 108mm, 133mm & 159 mm. No. 610-EN, 90° Copper Elbow: 54mm, 66.7mm, 76.1mm, 108mm, 133m & 159 mm. No. 611-EN, 45° Copper Elbow: 54mm, 66.7mm, 76.1mm, 108mm, 133mm & 159 mm. No. 620-EN, Copper Tee: 54mm, 66.7mm, 76.1mm, 108mm, 133mm & 159 mm. No. 625-EN, Copper Reducing Tee: 66.7mm x 54mm, 76.1mm x 66.7mm, 108mm x 76.1mm & 159mm x 108mm. No. 650-EN, Copper Concentric Reducer: 66.7mm x 54mm, 76.1mm x 66.7mm, 108mm x 76.1mm, 133mm x 108mm, 159mm x 108mm & 159 x 133 mm. No. 660-EN, Copper End Cap: 54mm, 66.7mm, 76.1mm, 108mm, 133mm & 159 mm.

Product Images

Approval Holder:

Victaulic Europe BVBA

Company Name

Victaulic Europe BVBA

Address

Prijkelstraat 36 Nazareth

Postcode

B-9810

Country

Belgium

General Email

ed.mccarson@victaulic.com

View All Listings by this Company

‘EPH_WSP19’ Range of brass bodied fittings for use with copper pipe, some fittings are to be soldered with copper pipe (see models). Maximum working pressure 10.0 Bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2007079

Size:

See model

Marking:

Size and Flomasta on body

Installation Requirements:

R001

Expiry date:

31/07/2025

Model:

End Feed Fittings (Soldered): EPH_WSP19_0593 - End Feed Air Vent Cap 15mm EPH_WSP19_0608 - End Feed Wall Plate Elbow 15mm * ½” BSP (M) EPH_WSP19_0618 - End Feed Male Coupler 15mm * ½” BSP (M) EPH_WSP19_0619 - End Feed Male Coupler 15mm * ¾” BSP (M) EPH_WSP19_0625 - End Feed Male Coupler 22mm * ¾” BSP (M) EPH_WSP19_0635 - End Feed Female Coupler 15mm * ½” BSP (F) EPH_WSP19_0642 - End Feed Female Coupler 22mm * ¾” BSP (F) EPH_WSP19_0663 - End Feed Female Elbow 15mm * ½” BSP (F) EPH_WSP19_0676 - End Feed Male Elbow 15mm * ½” BSP (M) Threaded Brass fittings: Threaded Brass Blanking Nut: EPH_WSP19_0719A - ¼” BSP (F) EPH_WSP19_0720 - ⅜” BSP (F) EPH_WSP19_0721 - ½” BSP (F) - CHROME EPH_WSP19_0721A - ½” BSP (F) EPH_WSP19_0722A - ¾” BSP (F) EPH_WSP19_0723 - 1" BSP (F) Threaded Brass Male Flanged Plug: EPH_WSP19_0726 - ½” BSP (F) EPH_WSP19_0727 - ¾” BSP (F) EPH_WSP19_0724 - ¼” BSP (F) EPH_WSP19_0728 - 1" BSP (F) Threaded Brass Reducing Bush: EPH_WSP19_0747A - M-F ½” BSP (M) * ⅜" BSP (F) EPH_WSP19_0749A - M-F ¾” BSP (M) * ½” BSP (F) EPH_WSP19_0746 - M-F ½” BSP (M) * ¼” BSP (F) EPH_WSP19_0750A - M-F 1” BSP (M) * ¾” BSP (F) EPH_WSP19_0751 - M-F 1” BSP (M) * ½” BSP (F) Threaded Brass Hexagon Nipple: EPH_WSP19_0763A - M-M ½” BSP (M) * ½” BSP (M) EPH_WSP19_0764B - M-M ¾” BSP (M) * ¾” BSP (M) EPH_WSP19_0761 - M-M ¼” BSP (M) * ¼” BSP (M) EPH_WSP19_0765A - M-M 1” BSP (M) * 1” BSP (M) Threaded Brass Flanged Backnut: EPH_WSP19_0801 - ½” BSP (F) EPH_WSP19_0802A - ¾” BSP (F) Threaded Brass Female Socket: EPH_WSP19_0843 - ½” BSP (F) EPH_WSP19_0844 - ¾” BSP (F) EPH_WSP19_0841 - ¼” BSP (F) EPH_WSP19_0845 - 1” BSP (F) Threaded Brass Hexagon Nipple: EPH_WSP19_2476 - M-M ⅜” BSP (M) * ⅜” BSP (M) Tap extender: EPH_WSP19_2605 - ½” BSP (F) x ¾” BSP (M) EPH_WSP19_2609 - ¾” BSP (F) * ¾” BSP (M) Multi thread Nipple: EPH_WSP19_2599 - ¾” BSP (M) * ½” BSP (F) * 5/8” BSP (F) with rubber washer

Approval Holder:

Kingfisher International Products Ltd.

Company Name

Kingfisher International Products Ltd.

Address

3 Sheldon Square Paddington, London

Postcode

W2 6PX

View All Listings by this Company