Range of water meters with epoxy coated cast iron bodies. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1505 Water Meters

Size:

2½” BSP (M) connection. DN40, DN50, DN65, DN80, DN100, DN125, DN150, DN200, DN250, DN300 flanged connections.

Marking:

Resideo & Technical information on face. Size and flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/10/2028

Model:

EW1710AC5000 EW1710AC5600 EW1710AC6500 EW1710AC7300 EW1710AC8100 EW1710AC8500 EW1710AC8900 EW1710AC9100 EW1710AC9200

Approval Holder:

Pittway Sarl

Company Name

Pittway Sarl

Address

A3 - ZA La Pièce 6 1180 Rolle

Country

Switzerland

View All Listings by this Company

Range of water meter manifolds with plastic bodies for use with PE80 pipe (manufactured to BS EN 12201) and copper pipe. The products incorporate a drain off valve, plastic strainer and a single check valve cartridge however, the complete products have not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1510 Water Meter Manifolds

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm & 22mm Compression. 25mm Pushfit. Models added November 2025: ¾” x ¾”. ¾” x 15mm. ¾” x 22mm.

Marking:

Talbot, PN 16 & flow arrow on body

Installation Requirements:

R001 R008 R511

Expiry date:

28/02/2030

Model:

MA3261522AM Internal Meter Manifold Drain off MA3262215AM Internal Meter Manifold Drain off MA3262222AM Internal Meter Manifold Drain off MA3262515AM Internal Meter Manifold Drain off MA3262522AM Internal Meter Manifold Drain off MA3261515BM Internal Meter Manifold Blank plug MA3261522BM Internal Meter Manifold Blank plug MA3262215BM Internal Meter Manifold Blank plug MA3262222BM Internal Meter Manifold Blank plug MA3262515BM Internal Meter Manifold Blank plug MA3262522BM Internal Meter Manifold Blank plug Models added November 2025: 198003403410166 Internal Meter Manifold. 198003401510161 Internal Meter Manifold. 198003402210161 Internal Meter Manifold.

Approval Holder:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

Range of plastic pressure sensors. Maximum working pressure: 15.99 Bar. Maximum operating temperature 90.0°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model

Marking:

Part number, data code (X = last digit of year & YYY = day of year) and Sensata on body.

Installation Requirements:

R001

Expiry date:

30/11/2029

Model:

126CP3 - ¼” BSP M, 126CP4 - 3/8” BSP M, 126CP6 - 12mm OD.

Manufacturer:

Sensata Technologies de Mexico S de RL de CV

Company Name

Sensata Technologies de Mexico S de RL de CV

Address

Av. Aguascalientes Sur #401 Ex-Ejido Ojo Caliente Aguascalientes

Postcode

20290

Country

Mexico

Phone

+52 449 910 5500

View All Listings by this Company

Range of pressure transducers with stainless steel bodies. Maximum working pressure 10.0 Bar, 20 Bar or 40 Bar. Maximum operating temperature 99°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

9mm spigot for insertion into a quick release coupling or 1/4" BSP male.

Marking:

ABB, WRAS, Part number, Pressure range and technical info on adhesive label.

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

3KXF004496U0100 - 9mm spigot. 10 bar, 3KXF004496U0200 - 9mm spigot. 10 bar, 3KXF004496U0500 - 9mm spigot. 20 bar, 3KXF004496U0600 - 9mm spigot. 20 bar, 3KXF004496U0700 - 1/4" BSP male. 40 bar, 3KXF004496U0800 - 1/4" BSP male. 40 bar, 3KXF004496U0900 - 9mm spigot. 20 bar.

Approval Holder:

ABB Ltd.

Company Name

ABB Ltd.

Address

Oldends Lane, Stonehouse, Glos.

Postcode

GL10 3TA

View All Listings by this Company

Range of multistage and single stage water pumps with stainless steel bodies and impellers. Maximum working pressure 2.0 bar (AMS models), 4.0 bar (EDH & EMH models) 8.0 bar (LVS models). Maximum operating temperature 85°C

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241102712

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

LEO on cover. LEO, model & technical information on date label on body.

Installation Requirements:

R001 R415

Expiry date:

30/11/2029

Model:

EDH (m)XX-XX-F-E 1.m: different phase. --m: single phase, none: three phase. 2.XX: Rated flow (m³/h, range:2~20 m³/h. 3.XX: Impeller progression x10, progression range:1~6. 4.F: F type motor 5.E：E type end connection mode and size -- Rated flow (2 m³/h) :G1"XG1" -- Rated flow (4 m³/h) :G1¼"XG1¼" -- Rated flow (10-20 m³/h) :G2"XG2" AMS(m)XXX-XX-E 1.m: different phase. --m: single phase，none: three phase 2.XXX: Rated flow（L/min） 3. XX: Rated power（kW）. 4.E：E type end connection mode and size -- Rated flow(70-120m³/h) : G1¼"XG1" -- Rated flow(210m³/h) :G1½"XG1¼" -- Rated flow (370 m³/h): G2"XG1¼" LVSXXX-XX-(1/2/C/D/2C/2D/C-D) -(B) -E 1.XXX: Rated flow（m³/h）, Range:1~200 m³/h. 2.XX: Impeller progession，progession range:1~36. 3. 1/2/C/D/2C/2D/C-D: Extra impeller: --1or2，On behalf of the product with 1 or 2 small size impeller. --C or D，On behalf of the product with a size C or size D impeller. --2C or 2D，On behalf of the product with two size C or size D impellers. --C-D, On behalf of the product with a size C and a size D impeller. 4.B: the materials of wetted parts --B，material is SUS 316. --None，material is SUS 304. 5.E：E type end connection mode and size -- Rated flow(1-3m³/h) : DIN Flange connection DN 25 -- Rated flow(4-5m³/h) : DIN Flange connection DN 32 -- Rated flow(10m³/h) : DIN Flange connection DN 40 -- Rated flow(15-20m³/h) : DIN Flange connection DN 50 -- Rated flow(32m³/h) : DIN Flange connection DN 65 -- Rated flow(45m³/h) : DIN Flange connection DN 80 -- Rated flow(64-90m³/h) : DIN Flange connection DN 100 -- Rated flow(120-150m³/h) : DIN Flange connection DN 125 -- Rated flow(200m³/h) : DIN Flange connection DN 150 EMH (m)XX-XX\XX-SE 1.m: different phase. --m: single phase，none: three phase. 2.XX: Rated flow（m³/h），range: 2、3、4、8、10、12、16、20m³/h. 3.XX: impeller progession (1,2,3,4,5,6,7) 4.XX: Small Impeller（1,2,3,4,5, ） 5.SE: SE Intelligent Type End connection mode and size Rated flow (2、3m³ /h) :G1"XG1" Rated flow (4m³ /h) :G1¼"XG1" Rated flow (8、10、12m³ /h) :G1½"XG1½" Rated flow (16、20m³ /h) :G2"XG2"

Manufacturer:

Leo Group Pump(Zhejiang) Co., Ltd

Company Name

Leo Group Pump(Zhejiang) Co., Ltd

Address

No 1,3rd street, East Industry Center,Wenling, Zhejiang, China

View All Listings by this Company

Range of pumps with stainless steel bodies. Maximum working pressure depends on model, please refer to model. Maximum operating temperature 65°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241102718

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

Clarke Pump, model & technical info on label.

Installation Requirements:

R001 R415

Expiry date:

30/11/2029

Model:

MHS90 4M MSP490: G1” BSP F (4.3bar). MHS90 5M MSP590: G1” BSP F (5.3bar). MHS90 6M MSP690: G1” BSP F (6.4bar). MHS120 4M MSP4120: G1¼” BSP F X G1” BSP F (4.5bar). MHS120 5M MSP5120: G1¼” BSP F X G1” BSP F (5.7bar). MHS120 6M MSP6120: G1¼” BSP F X G1” BSP F (6.9 bar).

Approval Holder:

Clarke International Limited

Company Name

Clarke International Limited

Address

Sealand House, Hemnall Street, Epping, Essex, CM16 4LG UK

View All Listings by this Company

Range of booster sets consisting of two or four electronically controlled pumps, stainless steel manifold, spherical valves, expansion vessels and pressure gauge/transducers and non-return valves. Maximum operating pressure 16 bar. Maximum operating temperature 23°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241104704

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1 ½” BSP (M) x 2” BSP (M) to 2" BSP (M) x 4" BSP (M).

Marking:

Stuart Turner, Dutypoint or Flowtech on control panel.

Installation Requirements:

R001 R415

Expiry date:

30/11/2029

Model:

Stuart Turner Version: SPAV-B-C-D/E Where; A = number of pumps – 2,3,4. B = Pump Model Code based on supplier models – Lowara examples 3HM06S/5SV08, Ebara example 0306, Stuart Turner Example HM0306. (Code changes based on pump flow rate & number of stages). C = controller type – MAB or MARB. D = power input – 1 phase or 3 phase. E = vessel capacity – 24L, 48L or 72L. Dutypoint Version VGA-BC-DE-F Where; A = Number of pumps - 2, 3 or 4 B = Nominal flow per pump - 05 = 5m3 C = Number of stages per pump - 06 = 6 stages D = kW size - 011 = 1.1kw E = Voltage - T = 3 phase, M = 1 phase F = Controller Type - MAB or MARB Flowtech Version: AVA-BC-DE-F Where; A = Number of pumps - 2, 3 or 4 B = Nominal flow per pump - 06 = 5m3 C = Number of stages per pump - 09 = 9 stages D = kW size - 011 = 1.1kw E = Voltage - T = 3 phase, M = 1 phase F = Controller Type - MAB or MARB

Approval Holder:

Dutypoint Ltd.

Company Name

Dutypoint Ltd.

Address

Unit A, Quedgeley West Business Park, Hardwicke, Gloucester

Postcode

GL2 4PA

Country

United Kingdom

Phone

01452313334

General Email

austin.hill@dutypoint.com

View All Listings by this Company

Circulation pump with a stainless steel body. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241104706

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1½” BSP (M)

Marking:

Archergas, model and technical information on case. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/11/2029

Model:

DHW15 Circulation Pump.

Approval Holder:

Archergas Limited

Company Name

Archergas Limited

Address

85 Bayham Street, Camden Town

View All Listings by this Company

‘UPM10’ and ‘UPM20’ range of circulator pumps with a stainless-steel body, plastic impellor and EPDM ‘O’-rings. The product is supplied with EPDM gaskets for the inlet and outlet. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241207701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1½” BSP (M) inlet/outlet.

Marking:

Grundfos and Grundfos logo, type and model on nameplate on motor housing. P/N no., P/C no., Serial (S/N) no., technical info, manufacturing country and data matrix on end of motor housing. Flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/12/2029

Model:

UPM 10M 25-95 N 180, UPM 10L 25-105 N 180, UPM 10XL 25-125 N 180, UPM 20S 25-145 N 180. Where: Pump type: UPM 10M, UPM 10L, UPM 10XL, UPM 20S. Control variant: []: PWM, LIN: LIN bus input signal, 0-10V, AUTO, HYBRID, SOLAR, DHW. Nominal diameter: 25: G 1½”. Max. Head: 95: 9.5m, 105: 10.5m, 125: 12.5m, 145: 14.5m. Designation/Pump housing: N 180: Stainless steel body, 180mm port to port length. Control box orientation: 3: 3 o’clock (right), 6: 6 o’clock (below), 9: 9 o’clock (left). Customer code: XXX (no impact on water contact parts).

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Self-priming single stage pump, with stainless steel body, plastic impellers, stainless steel shaft, NBR 'O'-rings and seals. Maximum working pressure 6.0 bar. Maximum operating temperature 45°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

241107701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1” BSP (F).

Marking:

Grundfos and Grundfos logo on body. Grundfos and Grundfos logo, type, model number, product/version number, technical information, serial number and manufacturing location on adhesive label on motor housing.

Installation Requirements:

R001 R008 R415

Expiry date:

30/11/2029

Model:

99458789: JP 4-54 1X230V 50Hz 1,5M UK HU IE2.

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company