Range of thermostatic mixing valves with DZR brass bodies. The inlets incorporate a stainless-steel strainer and single check valve cartridge verified by test (suitable for backflow protection against Fluid Category 2). Maximum working pressure 10 Bar Maximum operating temperature 85°C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

250402020

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

3/8” BSP M inlet/outlet

Marking:

Caleffi logo, CR, flow arrow, H, and, Mix on body

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

521202, 521202 AQS & 521202 CST

Manufacturer:

Caleffi S.p.A

Company Name

Caleffi S.p.A

Address

Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)

Postcode

28010

Country

Italy

Phone

+39 0322 8491

View All Listings by this Company

Range of wall mounted thermostatic bar shower mixers incorporating a non-rising spindle headwork controlling the flow. The temperature is controlled independently via a thermostatic cartridge that incorporates a manual override button. Both using either dome, cubed or single lever type operating members. The inlets incorporate stainless steel strainer washers and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with a shower hose, handset and riser rail assembly. Maximum working pressure 10 bar. Maximum operating temperature 65°C

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

250488006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” x ½” Offset unions.

Marking:

Aqualisa on all components

Installation Requirements:

R001 R010 R040

Expiry date:

30/04/2030

Model:

300BAR 590HP TWBAR1.21 300LBAR

Approval Holder:

Aqualisa Products Ltd.

Company Name

Aqualisa Products Ltd.

Address

Unit 6 The Flyers Way, Westerham, Kent

Postcode

TN6 1DE

Phone

07920 790367

General Email

tracey.jones@aqualisa.co.uk

View All Listings by this Company

Range of wall mounted thermostatic bar shower mixers (brass bodies – various finishes) incorporating a ceramic cartridge headwork that controls the flow and diverts form hand shower to overhead shower outlet. The temperature is controlled independently via a thermostatic cartridge with dome or cubed type operating members that incorporate a manual override button. The inlets incorporate approved single check valve cartridges, however, the complete assembly has not been fully tested to demonstrate that it provides backflow protection. Supplied with a hose, handset and overhead shower outlet. Maximum working pressure 10.0 Bar Maximum operating temperature 60 °C.

Section:

2010 Shower Valves

Section Subtitle:

Shower valve(s) with thermostatic temperature control

WRAS Approval Number:

250512002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm Compression

Marking:

Sonas on body

Installation Requirements:

R001 R010 R040

Expiry date:

31/05/2030

Model:

USH0205 USH0206 USH0210 USH0211 USH0212 Model added August 2025 USH0232 (Brushed Gold), USH0283 (Black), USH0284 (Black).

Approval Holder:

Sonas Bathrooms

Company Name

Sonas Bathrooms

Address

103 Northwest Business Park Ballycoolin, Dublin 15

Postcode

D15 R88

Country

Ireland

General Email

2894475300@qq.com

View All Listings by this Company

Manufacturer:

Sonas Bathrooms

Company Name

Sonas Bathrooms

Address

103 Northwest Business Park Ballycoolin, Dublin 15

Postcode

D15 R88

Country

Ireland

General Email

2894475300@qq.com

View All Listings by this Company

Section:

2010 Shower Valves

Description:

A Range of Shower valve(s) with thermostatic temperature control

Wall Mounted Concealed. Inlets incorporate approved single check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection.

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Installation Requirements:

R001 R020

Expiry date:

30/06/2030

Notes & Further Information

Model added February 2026: RP3 SAI SHCDIV C

Product Images

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

United Kingdom

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

Range of lever operated butterfly valves incorporating fusion bonded Epoxy coated ductile iron bodies, with stainless steel discs and end faces and EPDM seat. For use with Stainless steel pipe manufactured to EN 10217-7 (or Equivalent). For above and Below ground. Maximum working pressure 16.0 bar Maximum operating temperature 85°C

Section:

2020 Valves

Section Subtitle:

Butterfly.

WRAS Approval Number:

250402026

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DN50 – DN200 for use with Rigid couplers

Marking:

Victaulic, size, date of manufacture (MM/YY), serial No., pressure and other information on data plate on body.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

Series 250-ST, Strengthin100™ Potable Water Butterfly Valve Series 250-SE, OGS Potable Water Butterfly Valve

Approval Holder:

Victaulic Europe BVBA

Company Name

Victaulic Europe BVBA

Address

Prijkelstraat 36 Nazareth

Postcode

B-9810

Country

Belgium

General Email

ed.mccarson@victaulic.com

View All Listings by this Company

Wall mounted concealed two way and three way diverter valve assembly (brass bodies with trim sets in various finishes). The 59556 000070 and 59548 000170 concealed installation units are not approved in their own right. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:

2050 Diverter

Section Subtitle:

Diverter cartridge(s) with manual adjustment.

WRAS Approval Number:

250404017

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F)

Marking:

Keuco on wall plate

Installation Requirements:

R001 R040

Expiry date:

30/04/2030

Model:

IXMO range: 2-way divetrer: 59557 xxy0zz 2-way stop and diverter valve. Which must be installed in conjunction with the following: 59556 000070 concealed installation unit. 3-way divetrers: 59549 xxy1zz 3-way stop valve & diverter with hose connection, 59549 xxy2zz 3-way stop valve & diverter w. hose connect./shower holder. Both of which must be installed in conjunction with the following: 59548 000170 concealed installation unit. Where xx denotes finish: 01: chrome plated, 02: polished bronze, 03: brushed bronze, 04: polished nickel, 05: brushed nickel; 07: stainless steel finish, 12: polished black chrome, 13: brushed black chrome, 17: aluminium finish, 21: stainless steel finish, 25: brushed brass, 29: brushed red gold, 35: brushed titan black, 37: black matt. y0 = diverter valve without hose connection: 00: Pure handle, without hose connection, 10: Comfort handle, without hose connection). y1 = diverter valve with hose connection: 01: Pure handle, with hose connection, 10: Comfort handle, with hose connection. y2 = diverter valve with hose connection and shower holder: 02: Pure handle, with hose connection and shower holder, 12: Comfort handle, with hose connection and shower holder. zz = different shapes of rosette: z1: Rosette round, z2: Rosette square.

Approval Holder:

KEUCO GmbH & Co. KG

Company Name

KEUCO GmbH & Co. KG

Address

Oesestr. 36 Hemer

Postcode

58675

Country

Germany

Phone

+49 2372 / 904-265

General Email

info@keuco.de

View All Listings by this Company

Range of in-line, manually adjustable pressure reducing valves with DZR brass bodies. The RP1XX and RP2xx models can be supplied with a low- or high-pressure spring. The RP800 model is only available with a high-pressure spring. The RP1XX and RP2xx models can be pre-set from the factory at any value between the spring adjustment range (see below), e.g., the RP135 model will have a high-pressure spring and is pre-set at 3.5 bar. The RP800 is provided pre-set from the factory at 2.8 bar. Maximum inlet supply pressure 5.0 bar. Low-pressure spring adjustment range between 1.0 bar - 2.0 bar. High-pressure spring adjustment range between 2.1 - 5.0 bar. Cold water use only.

Section:

2200 Valves

Section Subtitle:

Pressure reducing.

WRAS Approval Number:

250104705

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

RP1XX: ⅜” BSP (F) inlet/outlet, RP2XX: ½” BSP (F) inlet/outlet, RP800: ½” BSP (F) inlet x ¾” BSP (M) outlet.

Marking:

Manufacturer’s logo (‘ST’), made in UE, flow arrow and CR on body.

Installation Requirements:

R001

Expiry date:

31/01/2030

Model:

RP1XX, RP2XX and RP800. Where XX relates to the pre-set pressure. Low pressure spring models will be between 10 and 20. High pressure spring models will be between 21 and 50. E.g. RP135 is pre-set at 3.5 bar.

Approval Holder:

Hawco Ltd T/A Abbeychart

Company Name

Hawco Ltd T/A Abbeychart

Address

Unit 5 & 6 Woodside Road South Marston Park Swindon

Postcode

SN3 4WA

Phone

01367 711900

General Email

abbeychart@abbeychart.co.uk

View All Listings by this Company

Manufacturer:

Special Taps Srl

Company Name

Special Taps Srl

Address

Via Delle Betulle 11 28075 Cavallirio

Country

Italy

General Email

View All Listings by this Company

Range of bronze swing gate valves with bronze bodies and discs (with a metal-to-metal seal). Maximum working pressure 25.0 bar. Maximum operating temperature 100°C.

Section:

2250 Valves

Section Subtitle:

Swing gate.

WRAS Approval Number:

250408702

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model

Marking:

Conex, PN, size and flow arrow on body. Conex and operating parameters on data label.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

147020RR025xxxx Series: 147020RR0250404 (DN15): ½” BSPT (F) inlet/outlet 147020RR0250606 (DN20): ¾” BSPT (F) inlet/outlet 147020RR0250808 (DN25): 1” BSPT (F) inlet/outlet 147020RR0251010 (DN32): 1¼” BSPT (F) inlet/outlet 147020RR0251212 (DN40): 1 ½” BSPT (F) inlet/outlet 147020RR0251616 (DN50): 2” BSPT (F) inlet/outlet.

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Range of spherical valves with DZR brass bodies, chrome plated brass balls and PTFE seats. The products incorporate a lever type operating members. Maximum working pressure 40.0 bar. Maximum operating temperature 100°C.

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

250408015

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

Conex, CR, PN rating and size on the body. Conex on lever.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

122050RRR400404 – ½” 122050RRR400606 – ¾” 122050RRR400808 – 1” 122050RRR401010 – 1 ¼” 122050RRR401212 – 1 ½” 122050RRR401616 – 2”

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Range of in-line angled or ‘T’ type spherical valves with chromium plated brass, nickel plated brass or brass bodies with chromium plated brass balls. Models incorporate lever or butterfly operating members. Maximum working pressure 10.0 Bar, 16 bar, 25 bar, 32 bar, 40 bar or 64 bar. Maximum operating temperature 100 °C.

Section:

2260 Valves

Section Subtitle:

Spherical, metal.

WRAS Approval Number:

250402041

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see models

Marking:

Models 124, 121, 121PB, 120PB, 120, 126, 130, 221, 221PB, 280, 220, 251, 256, 261, 298, 235R, 235B, 239, 253. EZFITT logo, batch number, PN, size on body. EZFITT logo, model code, size, temperature and PN on label attached to valve handle. Models 224PB, 257, 253”, 253, 240, 242, 244, 256 and 245. EZFITT logo, batch number, PN, size on body. EZFITT logo, model code and size on label attached to valve handle. Model 257 EZFITT logo, flow arrow, batch number PN, size on body. EZFITT logo, model code, size, temperature and PN on label attached to valve handle. Models 257 and 261 EZFITT logo, flow arrow, batch number PN, size on body. EZFITT logo, model code, size on label attached to valve handle. Model 237, EZFITT logo, batch number on body. EZFITT logo, model code, size, temperature and PN on label attached to valve handle. Model 246 EZFITT logo, PN and size on body.

Installation Requirements:

R001

Expiry date:

30/04/2030

Model:

Advance Series 220 - RTS F/F Flat handle 1/4", 3/8”; 1/2”; 3/4”; 1", 1"1/4; 1"1/2; 2”; 2"1/2; 3”; 4" 220PB - Blue - RTS F/F Flat handle 1/4", 3/8”, 1/2”, 3/4”, 1", 1"1/4, 1"1/2, 2”, 2"1/2, 3” 4" 280 - RTS F/F stainless steel flat handle 1/4"; 3/8”; 1/2”; 3/4”; 1"; 1"1/4; 1"1/2; 2”; 2"1/2; 3”; 4" 223 ADVANCE RTS F/F butterfly handle 1/4"; 3/8”; 1/2”; 3/4”; 1" 223PB - Blue - RTS F/F butterfly handle 1/4"; 3/8”; 1/2”; 3/4”; 1" 252 - RTS F/F flat handle with extension 1/2”; 3/4”; 1"; 1"1/4; 1"1/2; 2" 221 - RTS M/F Flat handle 1/4"; 3/8”; 1/2”; 3/4”; 1"; 1"1/4; 1"1/2; 2" 221PB - Blue - RTS M/F Flat handle 1/4"; 3/8”; 1/2”; 3/4”; 1"; 1"1/4; 1"1/2; 2" 224 - RTS M/F butterfly handle 3/8”; 1/2”; 3/4”; 1" 224PB - Blue - RTS M/F butterfly handle 3/8”; 1/2”; 3/4”; 1" 253 - RTS M/F flat handle with extension 1/2”; 3/4”; 1"; 1"1/4; 1"1/2; 2" 222 - RTS M/M Flat handle 3/8”; 1/2”; 3/4”; 1"; 1"1/4; 1"1/2; 2" 222PB - Blue - RTS M/M Flat handle 3/8”; 1/2”; 3/4”; 1"; 1"1/4; 1"1/2; 2" 225 - RTS M/M butterfly handle 3/8”; 1/2”; 3/4”; 1" 225PB - Blue - RTS M/M butterfly handle 3/8”; 1/2”; 3/4”; 1" 236 - MINI VALVE F/F 1/8”; 1/4”; 3/8”; 1/2”; 3/4" 237 - MINI VALVE M/F 1/8”; 1/4”; 3/8”; 1/2”; 3/4" 238 - MINI VALVE M/M 1/8”; 1/4”; 3/8”; 1/2”; 3/4" 251 - RTS STRAIGHT M/F with union fitting 1/2”; 3/4”; 1”. 257 - RTS WITH DECOMPRESSION F/F flat handle 3/8”; 1/2”; 3/4”; 1" 256 - Nickel-plated brass “Y” ball valve, FFF 3/4" x 1/2" x 1/2”; 1" x 3/4" x 3/4" 261 - RTS WITH SIEVE FILTER - butterfly handle 1/2”; 3/4" 298 - Square ball valve with union connection 1/2”; 3/4”; 1" 235R - Red - Ball valve, M/F, with free nut 1/2”; 3/4 235B - Blue - Ball valve, M/F, with free nut 1/2”; 3/4 239 - Mini ball valve in raw brass, MF, with nut 1/2" 240 - Ball valve before/after brass counter, FF 1/2" x 3/4”; 3/4" x 3/4" 242 - Ball valve before/after brass counter, MF 1/2" x 3/4”; 3/4" x 3/4”; 3/4" x 1" 246 - Bleed ball valve before/after meter in brass MF 1/2" x 3/4”; 3/4" x 3/4”; 1" x 3/4”; 1" x 1" 241 - Ball valve before/after brass counter, FF 1/2" x 3/4”; 3/4" x 3/4" 243 - Brass before/after meter ball valve, MF 1/2" x 3/4”; 3/4" x 3/4" 245 - Red - Brass before/after meter ball valve, MF 1/2" x 1/2”; 1/2" x 3/4”; 3/4" x 3/4" 244 - Square ball valve before/after meter in brass MF 1/2" x 3/4”; 3/4" x 3/4" SMART Series 120 - BALL VALVE F/F flat handle 3/8”; 1/2”; 3/4”; 1"; 1"1/4; 1"1/2; 2"; 2"1/2; 3”; 4" 120PB - Blue - BALL VALVE F/F flat handle 3/8”; 1/2”; 3/4”; 1"; 1"1/4; 1"1/2; 2"; 2"1/2; 3”; 4" 123 - BALL VALVE F/F butterfly handle 3/8”; 1/2”; 3/4”; 1" 121 - BALL VALVE M/F flat handle 3/8”; 1/2”; 3/4”; 1"; 1"1/4; 1"1/2; 2" 121PB - Blue - BALL VALVE M/F flat handle 3/8”; 1/2”; 3/4”; 1"; 1"1/4; 1"1/2; 2" 124 - BALL VALVE M/F butterfly handle 3/8”; 1/2”; 3/4”; 1" 122 - BALL VALVE M/M flat handle 3/8”; 1/2”; 3/4”; 1" 122PB - Blue - BALL VALVE M/M flat handle 3/8”; 1/2”; 3/4”; 1" 125 - BALL VALVE M/M butterfly handle 3/8”; 1/2”; 3/4”; 1" 126 - F/F Drain valve flat handle 1/2”; 3/4" 130 - M/M Drain valve flat handle 1/2”; 3/4"

Product Images

Approval Holder:

EZFITT

Company Name

EZFITT

Address

ZI Nord - 281 Avenue Pierre et Marie Curie 13340 ROGNAC

Country

France

View All Listings by this Company