Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2211308

Over head shower outlet with a chromium plated brass body, with a swivel function. Inlet incorporates NBR gasket with stainless-steel strainer and a flow regulator. Maximum operating temperature 60°C.

Section:: 1650 Shower Outlets
Section Subtitle:: Shower head(s) and/or shower handset(s).
WRAS Approval Number:: 2211308
Note:: Open outlet use only.
Size:: ½”BSP (M).
Marking:: Gessi on back plate.
Installation Requirements:: R001 R040
Expiry date:: 30/11/2027
Model:: 47289.

Product Images

Approval Holder:: Gessi S.p.A.

Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company
Manufacturer:: Gessi S.p.A.

Company Name
Gessi S.p.A.
Address
Parco Gessi Hamlet Vintebbio Serravalle Sesia
Postcode
13037
Country
Italy
Phone
+39 0163 454111
General Email
pfornara@gessi.it

View All Listings by this Company

WRAS Approval Number: #2211302

Screwdriver operated spherical (drain) valve with a brass body, brass ball, PTFE seats and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1770 Taps
Section Subtitle:: Draining, for above ground use only.
WRAS Approval Number:: 2211302
Size:: ½” BSP (M) x 14.92mm hose union connection.
Marking:: Caleffi logo on body.
Installation Requirements:: R001 R511
Expiry date:: 30/11/2027
Model:: 538400

Product Images

Approval Holder:: Caleffi S.p.A

Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company
Manufacturer:: Caleffi S.p.A

Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company

WRAS Approval Number: #2206374

Range of pillar taps (chromium plated brass) with a non-rising spindle headwork with dome type or cross top (see model) operating member. The spout outlet incorporates a plastic flow straightener. The product is supplied with metal back nuts. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1800 Taps
Section Subtitle:: Pillar tap(s).
WRAS Approval Number:: 2206374
Size:: ½" BSP (M)
Marking:: DTC 34 ON TAP BODY
Installation Requirements:: R001 R006
Expiry date:: 30/06/2027
Model:: DCM103, DCM SPEC103, 208.0574.185, MILAN 103, MILAN SPEC103, 183X & 208.0574.189

Approval Holder:: Methven UK Limited

Company Name
Methven UK Limited
Address
3-3A Stone Cross Court Yew Tree Way Golborne Warrington
Postcode
WA3 3JE
Country
United Kingdom
Phone
0800 195 1602
General Email
raluca.olariu@uk.methven.com

View All Listings by this Company

WRAS Approval Number: #2211013

Range of pillar taps (chromium plated brass) incorporating quarter turn ceramic disc headworks with a single lever, dome, or cross top type operating member (see models). The spout outlet incorporates a plastic flow straightener. Models are supplied with metal backnuts. Maximum working pressure 10.0 Bar Maximum operating temperature 65.0°C

Section:: 1800 Taps
Section Subtitle:: Pillar tap(s).
WRAS Approval Number:: 2211013
Size:: ½” BSP (M)
Marking:: Top-Rinse and WRAS on body.
Installation Requirements:: R001 R006
Expiry date:: 30/11/2027
Model:: UK58031L (Lever) UK58031C (Cross Top) UK58031R (Dome)

Product Images

Approval Holder:: Zhejiang Sunmixer Sanitary Ware Co.,Ltd

Company Name
Zhejiang Sunmixer Sanitary Ware Co.,Ltd
Address
Science & Technology Industrial Zone, Chumen, Yuhuan, Zhejiang
Country
China
Phone
+86-576-87121119

View All Listings by this Company
Manufacturer:: Zhejiang Sunmixer Sanitary Ware Co.,Ltd

Company Name
Zhejiang Sunmixer Sanitary Ware Co.,Ltd
Address
Science & Technology Industrial Zone, Chumen, Yuhuan, Zhejiang
Country
China
Phone
+86-576-87121119

View All Listings by this Company

WRAS Approval Number: #2211014

Range of pillar taps (chromium plated brass) incorporating quarter turn ceramic disc headworks with a single lever, dome, or cross top type operating member (see models). The spout outlets incorporate plastic flow straighteners. Models are supplied with metal backnuts. Maximum working pressure 10.0 Bar Maximum operating temperature 65.0°C

Section:: 1800 Taps
Section Subtitle:: Pillar tap(s).
WRAS Approval Number:: 2211014
Size:: ½” BSP (M)
Marking:: Top-Rinse and WRAS on body
Installation Requirements:: R001 R005
Expiry date:: 30/11/2027
Model:: UK58021L (Lever) UK58021C (Cross Top) UK58021R (Dome)

Product Images

Approval Holder:: Zhejiang Sunmixer Sanitary Ware Co.,Ltd

Company Name
Zhejiang Sunmixer Sanitary Ware Co.,Ltd
Address
Science & Technology Industrial Zone, Chumen, Yuhuan, Zhejiang
Country
China
Phone
+86-576-87121119

View All Listings by this Company
Manufacturer:: Zhejiang Sunmixer Sanitary Ware Co.,Ltd

Company Name
Zhejiang Sunmixer Sanitary Ware Co.,Ltd
Address
Science & Technology Industrial Zone, Chumen, Yuhuan, Zhejiang
Country
China
Phone
+86-576-87121119

View All Listings by this Company

WRAS Approval Number: #2301801

Range of pillar taps (brass body in various finishes) incorporating a quarter turn ceramic disc headwork with single lever operating members. The spout outlets incorporates a plastic aerator. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:: 1800 Taps
Section Subtitle:: Pillar tap(s).
WRAS Approval Number:: 2301801
Size:: Stainless steel braided PEX lined flexible hose assembly incorporating a ⅜” captive nut end connection.
Marking:: Keuco on body
Installation Requirements:: R001 R006 R009
Expiry date:: 31/01/2028
Model:: 51508 xx0100 – Edition 400 ‘xx’ denotes finish, and is available in: 01 - chrome plated, 02 - polished bronze, 03 - brushed bronze, 04 - polished nickel, 05 - brushed nickel, - 12 polished Black Chrome & 13 - brushed Black Chrome.

Approval Holder:: KEUCO GmbH & Co. KG

Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36 Hemer
Postcode
58675
Country
Germany
Phone
+49 2372 / 904-265
General Email
info@keuco.de

View All Listings by this Company
Manufacturer:: KEUCO GmbH & Co. KG

Company Name
KEUCO GmbH & Co. KG
Address
Oesestr. 36 Hemer
Postcode
58675
Country
Germany
Phone
+49 2372 / 904-265
General Email
info@keuco.de

View All Listings by this Company

WRAS Approval Number: #2210064

Range of PVC or EPDM lined shower hoses with stainless steel outer (chrome or black finish) or PVC reinforced (chrome plated finish) outer layer. Maximum operating temperature 65°C.

Section:: 1860 Tubes
Section Subtitle:: Plastic hoses.
WRAS Approval Number:: 2210064
Note:: Open outlet use only
Size:: ½” BSP captive nut.
Marking:: TRITON on captive nut.
Installation Requirements:: R001
Expiry date:: 31/10/2027
Model:: Stainless steel double locked hoses: 28100240: 1.0m Electrolytic Chrome. 28100210: 1.25m Electrolytic Chrome. 28100260: 1.75m Electrolytic Chrome. 28100270: 2.0m Electrolytic Chrome. 28100300: 1.5m Electrolytic Chrome. 28100380: 0.75m Electrolytic Chrome. 28100410: 1.5m Matt Black (Satin Black). 28100390: 0.75m Matt Black (Satin Black). 28100400: 1.0m Matt Black (Satin Black). H2006S* & H2023S* * denotes surface finish and can be replaced with: CE = Electrolytic Chrome or MB = Matt (Satin) Black. PVC reinforced hoses: 28100340: 1.5m Chrome Plated. 28100370: 1.0m Chrome Plated.

Approval Holder:: Triton Showers

Company Name
Triton Showers
Address
Triton Road, Nuneaton, Warwickshire
Postcode
CV11 4NR
Country
United Kingdom
Phone
02476 324423
General Email
paulrowley@tritonshowers.co.uk

View All Listings by this Company

WRAS Approval Number: #2210049

Stainless-steel or nylon braided PEX lined flexible hose assemblies with various end connections (see model). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1860 Tubes
Section Subtitle:: Plastic hoses.
WRAS Approval Number:: 2210049
Size:: See model.
Marking:: M&J (Trademark of Taizhou M&J Sanitary Ware Co., Ltd.), WRAS and year of manufacture (YYYY) on ferrule.
Installation Requirements:: R001 R008
Expiry date:: 31/10/2027
Model:: MJ-SS-P (stainless steel braided) & MJ-NY-P (Nylon braided): DN6 bore: ⅜" captive nut (brass barb), ⅜" captive nut (SUS barb), M8 (brass barb), M8 (SUS barb), M10x1 (brass barb), M10x1 (SUS barb), Plastic quick connector DN11. D8 bore: ⅜" captive nut (brass barb), ⅜" captive nut (SUS barb), ½" captive nut (brass barb), ½" captive nut (SUS barb), ¾" captive nut (brass barb), ¾" captive nut (SUS barb), M8 (brass barb), M8 (SUS barb), M10x1 (brass barb), M10x1 (SUS barb), F15x1 (brass barb), F15x1 (SUS barb), M15x1 (brass barb), M15x1 (SUS barb), Ø11 insert (brass barb), Ø11 insert (SUS barb), Ø11 insert (plastic barb), Plastic quick connector DN11.

Approval Holder:: Taizhou M&J Sanitary Ware Co., Ltd.

Company Name
Taizhou M&J Sanitary Ware Co., Ltd.
Address
Luqiao District, Taizhou City, Zhejiang
Country
China

View All Listings by this Company

WRAS Approval Number: #2103343

Range of stainless steel, stainless steel with nylon or nylon braided, EPDM lined hose assemblies. Some models incorporate servicing valves. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2103343
Size:: DN 6 (denoted by 06) bore diameter availble with the following end connections: 01= F1/4 02= F1/4 elbow 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 26= F15 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring DN8 (denoted by 08) bore diameter availble with the following end connections: 03= M1/4 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 19= M8*(12-110) with single O-ring 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 26= F15 27=15mm smooth tube 29=10mm Compression fitting 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (used with copper tube manufactured to BS2871) 40=12mm pushfit isolation valve (used with copper tube manufactured to BS2871) 41=15mm pushfit isolation valve (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871) 43= F1/2 plastic nut 44= F3/4 plastic nut 45= M8*(12‐110) with double O‐ring 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN10 (denoted by 10) bore diameter availble with the following end connections: 04= F3/8 05= F3/8 knurling nut 06= F3/8 insert without nut 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 20= M10*(12-110) with single O-ring; 21= M11*(12-110) with single O-ring 22= M12*(12-110) with single O-ring ; 23= M14*(12-110) with single O-ring 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 30=12mm compression fitting 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 35=10mm pushfit (used with copper tube manufactured to BS2871) 36=12mm pushfit (used with copper tube manufactured to BS2871) 37=15mm pushfit (used with copper tube manufactured to BS2871) 38=22mm pushfit (used with copper tube manufactured to BS2871) 39=10mm pushfit isolation valve (for use with copper tube) 40=12mm pushfit isolation valve (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 46= M10*(12‐110) with double O‐ring 47= M11*(12‐110) with double O‐ring 48= M12*(12‐110) with double O‐ring 49= M14*(12‐110) with double O‐ring 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN13 (denoted by 13) bore diameter availble with the following end connections: 04= F3/8 07= F3/8 elbow 08= M3/8 09= F1/2 10= F1/2 wing nut 11= F1/2 elbow 12= M1/2 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 24= M15*(12-110) with single O-ring ; 25= M16*(12‐110) with single O‐ring 27=15mm smooth tube 28=22mm smooth tube 31=15mm compression fitting 32=22mm compression fitting 33=15mm isolation valve 34=22mm isolation valve 37=15mm pushfit (for use with copper tube) 38=22mm pushfit (for use with copper tube) 41=15mm pushfit isolation valve (for use with copper tube) 42=22mm pushfit isolation valve (for use with copper tube) 43= F1/2 plastic nut 44= F3/4 plastic nut 50= M15*(12‐110) with double O‐ring 51= M16*(12‐110) with double O‐ring DN19 (denoted by 09) bore diameter availble with the following end connections 13= F3/4 14= F3/4 elbow 15= M3/419= M8*(12-110) with single O-ring 16= F1 17=F1 elbow 18= M1 28=22mm smooth tube 32=22mm compression fitting 34=22mm isolation valve 38=22mm pushfit (used with copper tube manufactured to BS2871) 42=22mm pushfit isolation valve (used with copper tube manufactured to BS2871)
Marking:: Altecnic WRAS and (date of manufacture) LD on ferrule Where the date code (if present) indicates the date of manufacture as follows: I – 2019, J – 2020, K – 2021, L – 2022, M – 2023, N - 2024. Followed by A - Jan, Feb, March, B - Apr, May, June, C - July, Aug, Sept, D - Oct, Nov, Dec e.g. ID = manufactured in the 4th quarter (Oct, Nov, Dec) of 2019. Model added September 2021: AP-400012: Altecnic and date code on body. Where the date code (if present) indicates the date of manufacture as follows: I - 2019, J - 2020, K - 2021, L - 2022, M - 2023, N - 2024. Followed by: A - Jan, Feb, March. B - Apr, May, June. C - July, Aug, Sept. D - Oct, Nov, Dec. e.g. ID = manufactured in the 4th quarter (Oct, Nov, Dec)
Installation Requirements:: R001
Expiry date:: 31/03/2026
Model:: JL-F1400120012487 & JL-140038003813

Approval Holder:: Altecnic Limited

Company Name
Altecnic Limited
Address
Francesco House, Staples Close Stafford Staffordshire
Postcode
ST16 1WQ
Country
United Kingdom
Phone
+44 (0)1785 218200
General Email
sales@altecnic.co.uk

View All Listings by this Company

WRAS Approval Number: #2207056

Stainless-steel or nylon braided EPDM lined flexible hoses assemblies with various end connections (see model). Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:: 1863 Tubes
Section Subtitle:: Elastomeric.
WRAS Approval Number:: 2207056
Size:: See model.
Marking:: M&J (Trademark of Taizhou M&J Sanitary Ware Co., Ltd.), WRAS and year of manufacture (YYYY) on ferrule.
Installation Requirements:: R001
Expiry date:: 31/07/2027
Model:: MJ-SS-E (stainless steel braided) & MJ-SS-E (Nylon braided): DN6 bore: ⅜" captive nut (brass barb), ⅜" captive nut (SUS barb), M8 (brass barb), M8 (SUS barb), M10x1 (brass barb), M10x1 (SUS barb), Plastic quick connector DN11. D8 bore: ⅜" captive nut (brass barb), ⅜" captive nut (SUS barb), ½" captive nut (brass barb), ½" captive nut (SUS barb), ¾" captive nut (brass barb), ¾" captive nut (SUS barb), M8 (brass barb), M8 (SUS barb), M10x1 (brass barb), M10x1 (SUS barb), F15x1 (brass barb), F15x1 (SUS barb), M15x1 (brass barb), M15x1 (SUS barb), Ø11 insert (brass barb), Ø11 insert (SUS barb), Ø11 insert (plastic barb), Plastic quick connector DN11.

Product Images

Approval Holder:: Taizhou M&J Sanitary Ware Co., Ltd.

Company Name
Taizhou M&J Sanitary Ware Co., Ltd.
Address
Luqiao District, Taizhou City, Zhejiang
Country
China

View All Listings by this Company