'Badadur PBT9 GF10/GK20 grau 930a'. Grey coloured, injection moulded PBT material. For use with water up to 85°C.

Section:

5205 Polybutylene Terephthalate

Expiry date:

31/01/2029

Approval Holder:

Bada AG

Company Name

Bada AG

Address

Untere Strut 1, D-77815 Bühl/Baden

Country

Germany

General Email

waldecker@bada.de

View All Listings by this Company

'PTFE G439'. Terracotta coloured, extruded PTFE sealing ring. For use with water up to 85°C.

Section:

5294 Polytetrafluoroethylene (PTFE)

Section Subtitle:

Components.

WRAS Approval Number:

240155020

Expiry date:

31/01/2029

Approval Holder:

Guarniflon SpA

Company Name

Guarniflon SpA

Address

Via T Tasso 12, 24060 Castelli Calepio (BG)

Country

Italy

Phone

+39 35 4494 311

General Email

info@guarniflon.com

View All Listings by this Company

‘METOLUX Metoset’. Site applied, grey coloured chemical anchor resin which is supplied in a pre-mixed cartridge. Apply as per manufacturer’s instructions 'version 2', dated 29.10.2023. Cure for 4 days@7°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.

Section:

5311 Resin Anchors

Expiry date:

31/05/2027

Approval Holder:

Chemfix Products Ltd.

Company Name

Chemfix Products Ltd.

Address

Mill Street East, Dewsbury, West Yorkshire

Postcode

WF12 9BQ

Phone

+44(0)1924 453886

View All Listings by this Company

'PT0469'. Black coloured, injection moulded EPDM material. Shore hardness 60. Tested in-radius size 1.3mm. For use with water up to 85°C.

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2311549

Expiry date:

30/11/2028

Approval Holder:

TS International S.r.l.

Company Name

TS International S.r.l.

Address

Via G. Carducci 19, 24060 Sovere (BG)

Country

Italy

View All Listings by this Company

'EP002971PWRC'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2403502

Expiry date:

31/03/2029

Approval Holder:

Chang Xing Rubber (Shanghai) LLC.

Company Name

Chang Xing Rubber (Shanghai) LLC.

Address

No. 88, Zhong-Chen Rd. Songjiang Zone, Shanghai City

Country

China

View All Listings by this Company

'EPDM HT5697-4A'. Black coloured, injection moulded EPDM material. Shore hardness 60. Tested in-radius size 1.0mm. Between May 2024 and October 2024, the material was for use with water up to 50°C. Between November 2024 and May 2029, the material is for use with water up to 60°C.

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2405504

Expiry date:

31/05/2029

Approval Holder:

Terramix SA/Hultec

Company Name

Terramix SA/Hultec

Address

De Empaques Santa Ana 150 M Este Y 125 M Sur Pozos De Santa Ana

Country

San Jose, Costa Rica

Phone

Tel: +506 2829900 Fax: +506 2822514

View All Listings by this Company

'EP02971PWRC'. Black coloured, compression moulded EPDM material. Shore hardness 72. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

240755001

Expiry date:

31/07/2029

Approval Holder:

Chang Horing Rubber Co., Ltd.

Company Name

Chang Horing Rubber Co., Ltd.

Address

No 38 Lu-Gong South 3 Road, Lu-Kang Town, Changhua Hsien

Country

Taiwan

Phone

+886 4 7810868

View All Listings by this Company

'E59WKZ'. Black coloured, injection moulded EPDM rubber material. Shore hardness 58. Tested in-radius 1.0mm. For use with water up to 60°C.

Section:

5365 Rubbers

Section Subtitle:

Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

240550005

Expiry date:

31/05/2029

Approval Holder:

Duram Industries A.C. Ltd.

Company Name

Duram Industries A.C. Ltd.

Address

Kibbuts Ramat, Hakovesh, 44930

Country

Israel

View All Listings by this Company

'WN12/7/1 BLK 'O'-rings'. Black coloured, injection moulded NBR 'O' rings. Tested in-radii sizes between 0.89mm and 2.0mm. Shore hardness 70. For use with water up to 65°C.

Section:

5390 Rubbers

Section Subtitle:

Nitrile (Acrylonitrile Butadiene) - components.

WRAS Approval Number:

240955001

Expiry date:

30/09/2029

Approval Holder:

Superior Seals Ltd.

Company Name

Superior Seals Ltd.

Address

Nimrod Way, Ferndown Industrial Estate, Ferndown, Dorset

Postcode

BH21 7SH

Country

UK

Phone

01202 854 300

General Email

sales@superiorltd.com

View All Listings by this Company

'HCR 9230, HCR 9250, HCR 9270 & HCR 9280'. Natural (appear white, translucent), compression moulded silicone rubber materials. Shore hardness between 30 & 80. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:

5415 Rubbers

Section Subtitle:

Silicone - material only. Components made from materials listed in this section may be required to be submitted for audit tests.

WRAS Approval Number:

2312535

Expiry date:

31/12/2028

Approval Holder:

Jiangxi Bluestar Xinghuo Silicones Co. Ltd.

Company Name

Jiangxi Bluestar Xinghuo Silicones Co. Ltd.

Address

Xinghuo Industrial Park, Yongxiu County, Jiujiang City, Jiangxi Province

Country

China

View All Listings by this Company