Directory Search Results

Fittings Materials
Print List

#2311506

'HQB1W Butyl Sealant'. White coloured, flexible butyl tape. Apply as per manufacturer's instructions. For use with water up to 85°C.

Section:
5330 Rubbers
Section Subtitle:
Butyl - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2311506
Expiry date:
30/11/2028
Approval Holder:
Specialist Technical Products Ltd.
Company Name
Specialist Technical Products Ltd.
Address
Unit 9, Smoke Hall Lane Industrial Estate, Winsford
Postcode
CW7 3BE

View All Listings by this Company

Print This Approval

#2307523

'07148-70' components. Black coloured, compression moulded EPDM components with a shore hardness of 70. Sealing gaskets have an in-radius size of 1.0mm. Sealing membranes have an in-radius size of 0.92mm. Gasket membranes have an in-radius size of 0.85mm. Membrane seals have an in-radius size of 1.0mm. Sealing rings have an in-radius size of 1.0mm. For use with water up to 85°C.

Section:
5360 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - components.
WRAS Approval Number:
2307523
Expiry date:
31/07/2028
Approval Holder:
Gulf Rubber Group - Tumedei SpA
Company Name
Gulf Rubber Group - Tumedei SpA
Address
Via Bolzano 12, 38061 Ala (TN)
Country
Italy

View All Listings by this Company

Print This Approval

#2307524

‘07146-80’ components. Black coloured, compression moulded EPDM components with a shore hardness of 80. Sealing Gasket with an in-radius of 1.5mm. Membrane Seal with an in-radius of 1.0mm. Sealing Gasket with an in-radius of 1.0mm. Gasket Membrane with an in-radius of 1.0mm. Sealing Ring with an in-radius of 1.0mm. For use with water up to 85°C.

Section:
5360 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - components.
WRAS Approval Number:
2307524
Expiry date:
31/07/2028
Approval Holder:
Gulf Rubber Group - Tumedei SpA
Company Name
Gulf Rubber Group - Tumedei SpA
Address
Via Bolzano 12, 38061 Ala (TN)
Country
Italy

View All Listings by this Company

Print This Approval

#2307525

'ITK349601'. Black coloured, injection moulded EPDM C-seals. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5360 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - components.
WRAS Approval Number:
2307525
Expiry date:
31/07/2028
Approval Holder:
Italstock S.r.l.
Company Name
Italstock S.r.l.
Address
Via Don Alessandro Ravizza 80, 24060 Castelli Calepio, Bergamo
Country
Italy

View All Listings by this Company

Print This Approval

#2307536

'E7518'. Black coloured, injection moulded EPDM C-seals. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5360 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - components.
WRAS Approval Number:
2307536
Expiry date:
31/07/2028
Approval Holder:
Trelleborg Sealing Solutions Germany GmbH.
Company Name
Trelleborg Sealing Solutions Germany GmbH.
Address
Schockenriedstraße 1. 70565 Stuttgart
Country
Germany

View All Listings by this Company

Print This Approval

#2306559

'ML 57314'. Black coloured, compression moulded EPDM material. Shore hardness 68A. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2306559
Expiry date:
30/06/2028
Approval Holder:
SumiRiko AVS Germany GmbH
Company Name
SumiRiko AVS Germany GmbH
Address
Karl Winnacker Strasse 22a, D-39396 Steinau an der Strasse
Country
Germany

View All Listings by this Company

Print This Approval

#2307527

'EPDM-812-cm (70H/mid)'. Black coloured, compression moulded EPDM sheet material. Shore hardness 70A. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2307527
Expiry date:
31/07/2028
Approval Holder:
Ein Shemer Rubber Industries A.C.A. Ltd
Company Name
Ein Shemer Rubber Industries A.C.A. Ltd
Address
D.N. Hefer 38816 Kibbutz Ein-Shemer
Country
Israel

View All Listings by this Company

Print This Approval

#2306561

'PT-EPDM55'. Black coloured, compression moulded EPDM material. Shore hardness 55. Tested in-radius size 1.1mm. For use with water up to 60°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2306561
Expiry date:
30/06/2028
Approval Holder:
Shanghai Pingtai Rubber Products Co. Ltd.
Company Name
Shanghai Pingtai Rubber Products Co. Ltd.
Address
No. 6 Siping Road, Situan Town, Fengxian District, Shanghai

View All Listings by this Company

Print This Approval

#2307529

'AEC.5/EPDM.80'. Black coloured, compression moulded EPDM material. Shore hardness 80. Tested in-radius size 1.1mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2307529
Expiry date:
31/07/2028
Approval Holder:
Allianz Elastomer
Company Name
Allianz Elastomer
Address
Opp.-Samarpan Lamination, Rajpar Road AT-Sakatsanla, Morbi 363641 Gujarat
Country
India

View All Listings by this Company

Print This Approval

#2308515

'EPDM 798'. Black coloured, injection moulded EPDM material (manufactured in Czech Republic). Shore hardness 60. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2308515
Expiry date:
31/08/2028
Approval Holder:
Trelleborg Pipe Seals
Company Name
Trelleborg Pipe Seals
Address
Pascallaan 80, 8218NJ Lelystad
Country
Netherlands

View All Listings by this Company

Print This Approval

#2308523

'Kingsun EP1702'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2308523
Expiry date:
31/08/2028
Approval Holder:
Kingsun Sealing Technology (Shanghai) Co., Ltd
Company Name
Kingsun Sealing Technology (Shanghai) Co., Ltd
Address
Room402, Building 7, No.5, Lane 689, Xiwang Road, Jiading District, Shanghai
Country
China

View All Listings by this Company

Print This Approval

#2312503

'XXE01'. Black coloured, compression moulded EPDM rubber material. Shore hardness 50. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2312503
Expiry date:
31/12/2028
Approval Holder:
Xingtai Rubber Factory
Company Name
Xingtai Rubber Factory
Address
No. 175 North Xingzhou Road, Xingtai City, Hebei Province
Country
China

View All Listings by this Company

Print This Approval

#2309510

'JM-EP01'. Black coloured, compression moulded EPDM material. Shore hardness 75. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2309510
Expiry date:
30/09/2028
Approval Holder:
Wuhu Jinmao Environmental Science & Technology Co. Ltd.
Company Name
Wuhu Jinmao Environmental Science & Technology Co. Ltd.
Address
The Industrial Zone in Suncun Town, Fanchang County, Anhui Province
Country
China

View All Listings by this Company

Print This Approval

#2308528

'Sunaflex T 8193'. Black coloured, compression moulded EPDM rubber material. Shore hardness 80. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2308528
Expiry date:
31/08/2028
Approval Holder:
Compounds AG
Company Name
Compounds AG
Address
Barzloostrasse 1, 8330 Pfaffiken ZH, Switzerland
Phone
+41 44 953 34 36
General Email
info@compounds.ch

View All Listings by this Company

Print This Approval

#2308529

'AquaFlex T 5893'. Black coloured, compression moulded EPDM material. Shore hardness 80. Tested in-radius size 1.0mm. For use with water up to 65°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2308529
Expiry date:
31/08/2028
Approval Holder:
Compounds AG
Company Name
Compounds AG
Address
Barzloostrasse 1, 8330 Pfaffiken ZH, Switzerland
Phone
+41 44 953 34 36
General Email
info@compounds.ch

View All Listings by this Company

Print This Approval

#2308530

'AquaFlex T 9696'. Black coloured, compression moulded EPDM material. Shore hardness 70. Tested in-radius size 1.0mm. For use with water up to 85°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2308530
Expiry date:
31/08/2028
Approval Holder:
Compounds AG
Company Name
Compounds AG
Address
Barzloostrasse 1, 8330 Pfaffiken ZH, Switzerland
Phone
+41 44 953 34 36
General Email
info@compounds.ch

View All Listings by this Company

Print This Approval

#2302565

‘SMS-8000-Premium’. Black coloured, compression moulded EPDM material. Shore hardness 80 respectively. Tested in-radius size 1.0mm. For use with water up to 23°C.

Section:
5365 Rubbers
Section Subtitle:
Ethylene Propylene Diene Monomer (EPDM) - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2302565
Expiry date:
29/02/2028
Approval Holder:
Samsun Makina Sanayi A.S.
Company Name
Samsun Makina Sanayi A.S.
Address
Organize Sanayi Bolgesi, Yasar Dogu Caddesi, No. 33 P.K. 136
Country
55267 Kutlukent,

View All Listings by this Company

Print This Approval

#2308539

'01/E90FKM Gaskets & 'O' rings'. Black coloured, injection moulded FKM gaskets & 'O' rings. Shore hardness 90. The gaskets have an in-radius size of 1.1mm and the 'O' rings have an in-radius size of 1.0mm. For use with water up to 85°C.

Section:
5370 Rubbers
Section Subtitle:
Fluoroelastomers - components.
WRAS Approval Number:
2308539
Expiry date:
31/08/2028
Approval Holder:
LAV.EL. Gomma Srl
Company Name
LAV.EL. Gomma Srl
Address
Via Aldo Moro 20/22 25033 - Cologne (BS)
Country
Italy
Phone
0039.030.70.50.956
General Email
info@lavelgomma.it

View All Listings by this Company

Print This Approval

#2309511

'210N' components. Black coloured, injection moulded NBR rubber ‘O’ rings, washers and lip seals. Shore hardness 70. The ‘O’ rings have an in-radius of 1.31mm, the washers 1.05mm and the lip seals 0.45mm. For use with water up to 60°C.

Section:
5390 Rubbers
Section Subtitle:
Nitrile (Acrylonitrile Butadiene) - components.
WRAS Approval Number:
2309511
Expiry date:
30/09/2028
Approval Holder:
Trelleborg Sealing Solutions Plymouth
Company Name
Trelleborg Sealing Solutions Plymouth
Address
1100 Xenium Lane North, Minneapolis, MN 55441
Country
United States

View All Listings by this Company

Print This Approval

#2307531

'ELASTOSIL LR 3020/60 A+B' Natural (appears white, translucent) & 'ELASTOSIL LR 3020/60 A+B with 2% by weight ELASTOSIL Colour Paste FL Red Iron Oxide RAL 3013' (red coloured). Injection moulded silicone rubbers with a shore hardness of 60 ShA and a tested in-radius size of 0.9mm. For use with water up to 85°C.

Section:
5415 Rubbers
Section Subtitle:
Silicone - material only. Components made from materials listed in this section may be required to be submitted for audit tests.
WRAS Approval Number:
2307531
Expiry date:
31/07/2028
Approval Holder:
Wacker Chemie AG
Company Name
Wacker Chemie AG
Address
Johannes-Heb-Strasse 24, D-84489, Burghausen
Country
Germany
Phone
Tel: +49 8677 835947 Fax: +49 8677 834142

View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page 260 of 509

© WRAS 2025 | Update Cookie Consent

Site Developed By Duo

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.