Directory Search Results

Print List

#2208802

Range of stainless steel braided HDPE lined flexible hose assemblies with various end connections. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
1860 Tubes
Section Subtitle:
Plastic hoses.
WRAS Approval Number:
2208802
Size:
DN13 Bore diameter Connections: ¾” captive nut elbow, ¾” captive nut, ¾” BSP(M)
Marking:
UW KOTT-GLIDE®, DVGW, 90°C,10 bar, DN 13, GI ACS, KIWA, WRAS, NSF 61/9, Year of Production (YYYY) on crimp connector.
Installation Requirements:
R001
Expiry date:
31/08/2027
Model:
DN 13 xxxyz KOTT-Glide® xxx – length in millimeters, 300 mm up to 3000 mm y & z could be replaced by following for connections a – elbow G¾” Nut b – G¾” Nut c – ¾” Male Thread

Approval Holder:
Uniwell Rohrsysteme GmbH & Co. KG
Company Name
Uniwell Rohrsysteme GmbH & Co. KG
Address
Siegelfelderstrasse 1 Ebern
Postcode
96106
Country
Germany
Phone
+49 9531 9229 0
General Email
simone.mueller@uniwell.de

View All Listings by this Company
Manufacturer:
Uniwell Rohrsysteme GmbH & Co. KG
Company Name
Uniwell Rohrsysteme GmbH & Co. KG
Address
Siegelfelderstrasse 1 Ebern
Postcode
96106
Country
Germany
Phone
+49 9531 9229 0
General Email
simone.mueller@uniwell.de

View All Listings by this Company

Print This Approval


#2201027

Range of stainless-steel interlocked shower hoses (various finishes (see model) incorporating an EDPM liner and NBR washers. Maximum working temperature 85°C

Section:
1863 Tubes
Section Subtitle:
Elastomeric.
WRAS Approval Number:
2201027
Note:
Open outlet use only.
Size:
½" BSP captive nut inlet and outlet.
Marking:
Connection 1 (G1/2 Hexagon nut): Delmei, WRAS and year of manufacture (YYYY) on nut. Connection 3 (G1/2 External ‘O’-ring speaker connector): Delmei, WRAS and year of manufacture (YYYY) on conical nut. Connection 5 (G1/2 Full vertical wire connector): Delmei, WRAS and year of manufacture (YYYY) on ferrule.
Installation Requirements:
R001
Expiry date:
31/01/2027
Model:
Models: DH-A-B-CC-D 15cm-250cm A denotes inner diameter: 1 - 6-7mm, 2 - 7-8mm, 3- 7-9mm, 4- 10 -12mm, 5- 11 -12mm. B denotes core 1 brass, 2 stainless steel. C denotes connectors for each end: 1 G1/2 Hexagon nut, 2 G1/2 knurled nut, 3 G1/2 External ‘O’- ring speaker connector, 4 G1/2 knurled horn connector, 5 G1/2 Full vertical wire connector. PLEASE NOTE The product is not available with connection 2 or connection 4 at both ends, or combined, e.g. connection 2 at one end and connection 4 at the other. Connections 2 and 4 will always be provided with connections 1, 3 or 5 at the other end. D denotes surface finish: 1 CP, 2 MB, 3 BN, 4 EA, 5 ORB, 6 Imitation gold Example model code: DH -1-1-14-2 250cm DH shower hose with 6-7mm inner diameter, brass core, G1/2 Hexagon nut x G1/2 knurled horn connector, MB finish, 250cm length.
Product Images

Approval Holder:
Xiamen Delmei Sanitary Ware Co Ltd
Company Name
Xiamen Delmei Sanitary Ware Co Ltd
Address
No. 700-702, Caotang Rd, Tong'an District, Xiamen China 361100

View All Listings by this Company
Manufacturer:
Xiamen Delmei Sanitary Ware Co Ltd
Company Name
Xiamen Delmei Sanitary Ware Co Ltd
Address
No. 700-702, Caotang Rd, Tong'an District, Xiamen China 361100

View All Listings by this Company

Print This Approval


#2205029

Range of automatic air venting valves with DZR brass bodies. Maximum working pressure 16.0 bar. Maximum operating temperature 60°C.

Section:
1980 Valves
Section Subtitle:
Air venting. Fittings in this section are suitable for above ground installations only.
WRAS Approval Number:
2205029
Marking:
RWC and DR mark on body.
Installation Requirements:
R001
Expiry date:
31/05/2027
Model:
ADMT503004: 15mm compression. ADMT503005: 22mm compression. ADMT503010: ¾” BSP (M).
Product Images

Approval Holder:
Reliance Worldwide Corporation
Company Name
Reliance Worldwide Corporation
Address
Horton Road, West Drayton
Postcode
UB7 8JL
Country
United Kingdom
Phone
+44 7730 052060
General Email
PETER.LANCASTER@RWC.COM

View All Listings by this Company

Print This Approval


#2206355

Wall mounted manual blending shower valve with a brass body (various finishes - see model) incorporating a ceramic cartridge headwork with a single lever operating member. The outlet incorporates an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
2206355
Note:
This approval does not include a shower hose and handset..
Size:
⅜” x ½” offset union.
Marking:
Hansgrohe on operating member
Installation Requirements:
R001 R010 R040
Expiry date:
30/06/2027
Model:
71602xxx HG Logis E shower mixer exposed. Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters. As examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.
Product Images

Approval Holder:
Hansgrohe SE
Company Name
Hansgrohe SE
Address
Auestrasse 5 - 9, Schiltach
Postcode
77761
Country
Germany
Phone
+49 170 4471 718
General Email
Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Print This Approval


#2207008

Wall mounted, exposed, manual blending valve (chromium plated brass), incorporating a ceramic cartridge headwork controlling both the flow and temperature with a single lever operating member. The shower outlet incorporates an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Not supplied with hose and handset. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
2207008
Size:
¾” BSP male x ½” BSP male offset union
Marking:
Dornbracht on front of body
Installation Requirements:
R001 R010 R040
Expiry date:
31/07/2027
Model:
33300845 Lisse
Product Images

Approval Holder:
Dornbracht GmbH & Co. KG.
Company Name
Dornbracht GmbH & Co. KG.
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval


#2207012

Range of concealed manually operated blending valves (brass bodies with chromium plated exposed trim sets) incorporating self-cancelling diverters (except models added December 2023 – 36020626 & 36020832) ceramic cartridge headworks controlling both temperature and flow with a single lever operating member. The inlets and the outlet incorporate approved check valve cartridge however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperature 80°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
2207012
Note:
IRN’s R030 will not apply to 36020626 & 36020832. This approval does not include a shower hose and handset or overhead shower.
Size:
½” (F) BSP
Marking:
Dornbracht on face plate
Installation Requirements:
R001 R010 R030 R040
Expiry date:
31/07/2027
Model:
Concealed Valves: 3502097090 3507097090 3502197090 3507197090 For use with exposed trim parts consisting of a ceramic cartridge, single lever operating member and self-cancelling diverter): 36120670 36120660 36120626 36120809 36120845 Models added December 2022 36120831 36120832 Models added December 2023: 36020626 (without self-cancelling diverter), 36020832 (without self-cancelling diverter), 36020831 (without self-cancelling diverter). Models added in December 2023 also for use with concealed parts listed above, however the diverter slot is plugged.
Product Images

Approval Holder:
Dornbracht GmbH & Co. KG.
Company Name
Dornbracht GmbH & Co. KG.
Address
Koebbingser Muehle 6 Iserlohn
Postcode
D-58640
Country
Germany
Phone
+49 2371 433 0
General Email
wpape@dornbracht.com

View All Listings by this Company

Print This Approval


#2207032

Wall mounted, manual blending shower valve, (chromium plated brass), incorporating quarter turn ceramic disc headworks with cross top operating members and a manual diverter to two shower outlets. The product is supplied with a shower riser, overhead shower rose, shower hose and handset. Each inlet incorporates a combined NBR washer and stainless-steel strainer, and an approved check valve cartridge, however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 Bar. Maximum working temperature 60°C.

Section:
2000 Shower Valves
Section Subtitle:
Shower valve(s) with manual temperature control.
WRAS Approval Number:
2207032
Size:
½" x ¾" offset union
Marking:
PPI On Body
Installation Requirements:
R001 R010 R040
Expiry date:
31/07/2027
Model:
201917
Product Images

Approval Holder:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company
Manufacturer:
PPI Xiamen Industry Co., Ltd.
Company Name
PPI Xiamen Industry Co., Ltd.
Address
No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen
Postcode
361022
Country
China
General Email
heatheryang@xmppi.com

View All Listings by this Company

Print This Approval


#2206312

Range of thermostatic blending valves incorporating chrome plated brass bodies. The inlet incorporates a stainless steel strainer and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Models 09 415 is supplied with a rigid connection set and tee piece and model 09 416 is supplied with a PEX lined flexible hose and tee piece connection set. Maximum working pressure 10.0 bar. Maximum operating temperature 60°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2206312
Note:
R007 applies to the flexible hose supplied with model 09 416
Size:
3/8 “ BSP (M) x 3/8” captive nut.
Marking:
Schell on cap.
Installation Requirements:
R001 R007 R010 R040
Expiry date:
30/06/2027
Model:
09 414, 09 415 & 09 416
Product Images

Approval Holder:
Schell GmbH & Co KG Armaturentechnologie
Company Name
Schell GmbH & Co KG Armaturentechnologie
Address
Raiffeisenstrasse 31 Olpe
Postcode
D-57462
Country
Germany
Phone
+492761892294
General Email
info@schell.eu

View All Listings by this Company
Manufacturer:
Schell GmbH & Co KG Armaturentechnologie
Company Name
Schell GmbH & Co KG Armaturentechnologie
Address
Raiffeisenstrasse 31 Olpe
Postcode
D-57462
Country
Germany
Phone
+492761892294
General Email
info@schell.eu

View All Listings by this Company

Print This Approval


#2207801

Range of T-type thermostatic blending valves (chromium plated DZR brass body). The inlets incorporate stainless steel strainers and an approved check valve cartridge which has been verified by test as suitable for backflow protection against Fluid Category 2. Compression models are for use with copper pipe manufactured to EN1057. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2207801
Size:
Please refer to model.
Marking:
Caleffi, CR and date of manufacture (WWYY) on body
Installation Requirements:
R001 R010 R040 R120
Expiry date:
31/07/2027
Model:
521115: 15mm compression x 15mm compression x 15mm compression. 521122: 22mm compression x 22mm compression x 22mm compression. 521503: ¾” BSP (M) x ¾” BSP (M) x ¾” BSP (M). 521400: ½” BSP (M) x ½” BSP (M) x ½” BSP (M). 521500: ¾” BSP (M) x ¾” BSP (M) x ¾” BSP (M). 521601: 1” BSP (M) x 1” BSP (M) x 1” BSP (M). 521100: 1” BSP (M) x 1” BSP (M) x 1” BSP (M).

Approval Holder:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company
Manufacturer:
Caleffi S.p.A
Company Name
Caleffi S.p.A
Address
Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)
Postcode
28010
Country
Italy
Phone
+39 0322 8491
General Email
gary.perry@caleffi.com

View All Listings by this Company

Print This Approval


#2206315

Range of wall mounted thermostatic shower valves incorporating brass bodies (various finishes), self-cancelling diverter and self-closing headwork. Temperature is controlled independently via a thermostatic cartridge with a dome type operating member. Models 1.1967.001, 1.1967.002, 1.1967.003 & 1.1967.004 are supplied with a shower hose, handset and riser rail and overhead shower. Models 1.1967.005, 1.1967.006, 1.1967.007 & 1.1967.008 are supplied with a shower hose, handset, riser rail & bath filler. Models 1.1967.009, 1.1967.010 & 1.1967.011 are supplied with a shower hose, handset and riser rail, overhead shower & bath filler. Maximum working pressure 5.0 bar. Maximum operating temperature 50°C.

Section:
2010 Shower Valves
Section Subtitle:
Shower valve(s) with thermostatic temperature control
WRAS Approval Number:
2206315
Size:
15mm pushfit.
Marking:
‘Mira Evoco’ on face plate ‘Mira Showers’ on handset.
Installation Requirements:
R001 R010 R030
Expiry date:
30/06/2027
Model:
1.1967.001 MIRA EVOCO DUAL SHOWER CP 1.1967.002 MIRA EVOCO DUAL SHOWER W/HYDROGLO CP 1.1967.003MIRA EVOCO DUAL SHOWER W/HYDROGLO BL 1.1967.004 MIRA EVOCO DUAL SHOWER W/HYDROGLO BN 1.1967.005 MIRA EVOCO DUAL BATH FILL CP 1.1967.006 MIRA EVOCO DUAL BATH FILL W/HYDROGLO CP 1.1967.007 MIRA EVOCO DUAL BATH FILL W/HYDROGLO BL 1.1967.008 MIRA EVOCO DUAL BATH FILL W/HYDROGLO BN 1.1967.009 MIRA EVOCO TRIPLE OUTLET W/ HYDROGLO CP 1.1967.010 MIRA EVOCO TRIPLE OUTLET W/ HYDROGLO BL 1.1967.011 MIRA EVOCO TRIPLE OUTLET W/ HYDROGLO BN
Product Images

Approval Holder:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company
Manufacturer:
Kohler Mira Ltd.
Company Name
Kohler Mira Ltd.
Address
Cromwell Road Cheltenham Gloucestershire
Postcode
GL52 5EP
Country
United Kingdom
Phone
07425 645619
General Email
jon.barfield@mirashowers.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 254 of 854

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.