Uponor S-Press press fittings, Uni-X & Uni-C compression fittings for use with Uponor MLC pipe. Maximum working pressure 10.0 bar, maximum operating temperature 70°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251188701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

14mm

Marking:

Manufacturers name or trademark “U” and size on fitting. Uponor and product info on pipe.

Installation Requirements:

R001

Expiry date:

30/11/2030

Model:

1058085 Uponor Uni-C compression adapter MLC 1013894 UPONOR UNI‐C COUPLING PLATED MLC 1014513 UPONOR S‐PRESS ADAPTER MALE THREAD 1014515 UPONOR S‐PRESS ADAPTER FEMALE THREAD 1014886 UPONOR S‐PRESS TEE 1015154 UPONOR S‐PRESS COUPLING 1015437 Uponor S-Press tap elbow 1133445 Uponor S-Press elbow 1133446 Uponor S-Press tap elbow twin 90deg long 1014654 Uponor SMART AQUA ELBOW ADAPTER S‐PRESS 1014511 UPONOR S‐PRESS ADAPTER 1013366 Uponor Uni Pipe PLUS white 1013577 Uponor Uni Pipe PLUS white insulated 1013678 Uponor Uni Pipe PLUS white in conduit 1160885 Uponor Uni Pipe PLUS white insulated

Approval Holder:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestrasse 56, Hassfurt

Postcode

97437,

Country

Germany

Phone

0034916853600

General Email

mariaisabel.fernandez@uponor.com

View All Listings by this Company

Manufacturer:

Uponor GmbH

Company Name

Uponor GmbH

Address

Industriestrasse 56, Hassfurt

Postcode

97437,

Country

Germany

Phone

0034916853600

General Email

mariaisabel.fernandez@uponor.com

View All Listings by this Company

‘Numepress’ range of stainless-steel crimp fittings incorporating EPDM and ‘O’-rings for use with 'Numepress' stainless steel pipe. Connection is achieved via M profile press jaws. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251202006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15, 18, 22, 28, 35, 42, 54, 76, 88, 108, 114, 139 and 168mm crimp. ½”, ¾”, 1”, 1 ¼”, 1 ½”, 2” BSP (M or F – stated via model name). DN50 to DN150 Flanged.

Marking:

ISOTUBI SL LOGO, Numepress and size on fitting body. ISOTUBI, Numepress, size and product info on pipe.

Installation Requirements:

R001

Expiry date:

31/12/2030

Model:

F01 Coupling from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F02 Slip Coupling from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F03 90Q Female-Female Elbow from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F04 90Q Male - Female Elbow from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F05 45Q Female-Female Elbow from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F06 45Q Female - Male Elbow from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F07 Female Angle Adapter from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F08 Male Angle Adapter from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F09 Female Elbow with Wall nut from 15 1/2" to 22 3/4" Material 1.4401/1.4404 & 1.4301/1.4307 F10 90Q Elbow with Plane Ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 F11 Valve connector with swivel in stainless Steel from 15 1/2" to 76.121/2" Material 1.4401/1.4404 & 1.4301/1.4307 F12 Female tee threaded adaptor from 15 1/2" to 108 2" Material 1.4401/1.4404 & 1.4301/1.4307 F14 Reducer from 18-15 to 168.3-139.7 Material 1.4401/1.4404 & 1.4301/1.4307 F15 Reducing tee from 18-15 to 168.3-139.7 Material 1.4401/1.4404 & 1.4301/1.4307 F16 Equal Tee from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F17 Female adaptor from 15 3/ 8" to 88.9 3" Material 1.4401/1.4404 & 1.4301/1.4307 F18 M ale adaptor from 15 3/8" to 108 4" Material 1.4401/1.4404 & 1.4301/1.4307 F19 Flanges adaptor from 15 DN15 to 108 DN100 Material 1.4401/1.4404 & 1.4301/1.4307 F20 Pre-formed pipe bridge from 15 to 28 Material 1.4401/1.4404 & 1.4301/1.4307 F21 Plug from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F22 Air tuve Pipe Bridge from 15 to 28 Material 1.4401/1.4404 & 1.4301/1.4307 F23 Pipe Bridge from 15 to 28 Material 1.4401/1.4404 & 1.4301/1.4307 F24 3 Pieces adaptor from 15 to 60.3 Material 1.4401/1.4404 & 1.4301/1.4307 F25 Female -Female pipe bridge from 15 to 28 Material 1.4401/1.4404 & 1.4301/1.4307 F26 Female connector from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F27 Male connector from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F28 Press flanged adaptor from 54 DN50 to 168.3 DN150 Material 1.4401/1.4404 & 1.4301/1.4307 F30 Cross or reduced cross from 15-15-15-15 to 168.3-168.3-168.3-168 .3 Material 1.4401/1.4404 & 1.4301/1.4307 F33 45Q Male angle adaptor from 15 1/ 2" to 28 1" Material 1.4401/1.4404 & 1.4301/1.4307 F34 90Q Female angle adaptor 15 3/ 8" to 35 1 1/ 4" Material 1.4401/1.4404 & 1.4301/1.4307 F35 90Q Female angle adaptor with swivel nut from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F36 Male Tee threaded adaptor from 15 3/8" to 35 11/4" Material 1.4401/1.4404 & 1.4301/1.4307 F37 Male threaded cross from 15 1/2" to 108-4" Material 1.4401/1.4404 & 1.4301/1.4307 F38 Female threaded cross from 15 1/ 2" to 108 4" Material 1.4401/1.4404 & 1.4301/1.4307 F39 90Q Male angle adaptor from 15 3/8" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F41 Male union connector gas from 15 1/ 2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F42 Female Union connector gas from 15 1/2" to 54 2" Material 1.4401/1.4404 & 1.4301/1.4307 F43 Grooved Transition from 3/4" to 2" Material 1.4401/1.4404 & 1.4301/1.4307 F44 Van Stone flange from 1/2" to 2" Material 1.4401/1.4404 & 1.4301/1.4307 F45 Union Gas Female threaded from 15 3/4" to 54 2"Material 1.4401/1.4404 & 1.4301/1.4307 F46 Straight union with press fitting on both ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 F47 Half coupling from 15 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F48 30Q Female-Female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F49 30Q Elbow with plain ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 F50 15Q Female-female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F51 60Q Female-female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F52 Flanges adaptor PN6 from 15 DN15 to 108 DN100 Material 1.4401/1.4404 & 1.4301/1.4307 F53 Pipe penetration from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F54 Male plug from 16 to 168.3 Material 1.4401/1.4404 & 1.4301/1.4307 F55 Weld Adaptor from 15 to 60.3 Material 1.4401/1.4404 & 1.4301/1.4307 F56 75Q Female -Female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F57 l0Q Female-Female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F58 60Q Elbow with plain ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 F59 lSQ Elbow with plain ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 F60 Slip coupling with female thread from DN15 1/ 2" to DN54 Material 1.4401/1.4404 & 1.4301/1.4307 F61 Transition for grooved coupling from DN28x33.7 to DN108x 11 4.3 Material 1.4401/1.4404 & 1.4301/1.4307 F63 7SQ Elbow with plain ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 F64 15Q Male -female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F65 Male-Female pipe penetration from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F66 30Q Male-female elbow from 15 to 108 Material 1.4401/1.4404 & 1.4301/1.4307 F72 45Q Elbow with plain ends from 15 to 54 Material 1.4401/1.4404 & 1.4301/1.4307 Pipe 15 x 0.6 mm Material 1.4401/1.4404 Pipe 18 x 0.7 mm Material 1.4401/1.4404 Pipe 22 x 0.7 mm Material 1.4401/1.4404 Pipe 28 x 0.8 mm Material 1.4401/1.4404 Pipe 35 x 1 mm Material 1.4401/1.4404 Pipe 42 x 1.1 mm Material 1.4401/1.4404 Pipe 54 x 1.2 mm Material 1.4401/1.4404 Pipe 76.1 x 1.5 mm Material 1.4 401/ 1.4404 Pipe 15 x 1 mm Material 1.4401/1.4404 Pipe 18 x 1 mm Material 1.4401/1.4404 Pipe 22 x 1.2 mm Material 1.4401/1.4404 Pipe 28 x 1.2 mm Material 1.4401/1.4404 Pipe 35 x 1.5 mm Material 1.4401/1.4404 Pipe 42 x 1.5 mm Material 1.4401/1.4404 Pipe 54 x 1.5 mm Material 1.4401/1.4404 Pipe 76.1 x 2 mm Material 1.4401/1.4404 Pipe 88.9 x 2 mm Material 1.4401/1.4404 Pipe 114.3 x 2 mm Material 1.4401/1.4404 Pipe 139.7 x 2 mm Material 1.4401/1.4404 Pipe 139.7 x 2.6 mm Material 1.4401/1.4404 Pipe 168.3 x 2 mm Material 1.4401/1.4404 Pipe 168.3 x 2.6 mm Material 1.4401/1.4404 Pipe 15 x 0.6 mm Material 1.4301/1.4307 Pipe 18 x 0.7 mm Material 1.4301/1.4307 Pipe 22 x 0.7 mm Material 1.4301/1.4307 Pipe 28 x 0.8 mm Material 1.4301/1.4307 Pipe 35 x 1 mm Material 1.4301/1.4307 Pipe 42 x 1.1 mm Material 1.4301/1.4307 Pipe 54 x 1 .2 mm, Material 1.4301/1.4307 Pipe 76.1 x 1.5 mm Material 1.4301/1.4307 Pipe 15 x 1 mm Material 1.4301/1.4307 Pipe 18 x 1 mm Material 1.4301/1.4307 Pipe 22 x 1. 2 mm Material 1.4301/1.4307 Pipe 28 x 1.2 mm Material 1.4301/1.4307 Pipe 35 x 1.5 mm Material 1.4301/1.4307 Pipe 42 x 1.5 mm Material 1.4301/1.4307 Pipe 54 x 1.5 mm Material 1.4301/1.4307 Pipe 76.1 x 2 mm Material 1.4301/1.4307 Pipe 88.9 x 2 mm Material 1.4301/1.4307 Pipe 108 x 2 mm Material 1.4301/1.4307 Pipe 114.3 x 2 mm Material 1.4301/1.4307 Pipe 139.7 x 2 mm Material 1.4301/1.4307 Pipe 139.7 x 2.6 mm Material 1.4301/1 .4307 Pipe 168.3 x 2 mm Material 1.4301/1.4307 Pipe 168.3 x 2.6 mm Material 1.4301/1.4307

Product Images

Approval Holder:

ISOTUBI SL

Company Name

ISOTUBI SL

Address

Pol. Ind. Santa Rita c/ Mecànica 6 08755 Castellbisbal ( Bcn ) SPAIN

Country

Spain

General Email

xavi.armengou@isotubi.com

View All Listings by this Company

Manufacturer:

ISOTUBI SL

Company Name

ISOTUBI SL

Address

Pol. Ind. Santa Rita c/ Mecànica 6 08755 Castellbisbal ( Bcn ) SPAIN

Country

Spain

General Email

xavi.armengou@isotubi.com

View All Listings by this Company

‘Fastwarm’ range of U profile press fittings (nickel plated brass bodies) for use with ‘Fastwarm’ range of PERT/AL/PERT multi-layered pipes. Maximum working pressure 10.0 bar. Maximum operating temperature 95°C.

Section:

1106 Multi-Layered Pipe Systems: incorporating an Aluminium layer

Section Subtitle:

Compatible fittings and pipe systems. Unless specified in the individual approval, the products within this section are not suitable for below ground use Because there are no accepted tests, WRAS approval of barrier pipe does not include an assessment of its ability to prevent migration of contaminants through the wall of the pipe from the surrounding soil.

WRAS Approval Number:

240704745

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

16mm – 32mm

Marking:

Fastwarm on body Fastwarm, size, WRAS and product info on pipe.

Installation Requirements:

R001

Expiry date:

31/07/2029

Model:

Equal Straight Union FW-KY101-S1616 S16X16 FW-KY101-S2020 S20X20 FW-KY101-S2525 S25X25 FW-KY101-S3232 S32X32 Unequal Straight Union FW-KY102-S2016 S20X16 FW-KY102-S2516 S25X16 FW-KY102-S2520 S25X20 FW-KY102-S3216 S32X16 FW-KY102-S3220 S32X20 FW-KY102-S3225 S32X25 Male Straight Union FW-KY103-S1612M S 16X1/2M FW-KY103-S1634M S 16X3/4M FW-KY103-S2012M S 20X1/2M FW-KY103-S2034M S 20X3/4M FW-KY103-S2512M S 25X1/2M FW-KY103-S2534M S 25X3/4M FW-KY103-S2511M S25X1M FW-KY103-S3234M S 32X3/4M FW-KY103-S3211M S 32X1M Female Straight Union FW-KY104-S1612F S 16X1/2 F FW-KY104-S1634F S 16X3/4 F FW-KY104-S2012F S 20X1/2 F FW-KY104-S2034F S 20X3/4 F FW-KY104-S2534F S 25X3/4 F FW-KY104-S2511F S 25X1 F FW-KY104-S3234F S 32X3/4 F FW-KY104-S3211F S 32X1 F Swivel Coupling FW-KY105-1612F 16X1/2F FW-KY105-2034F 20X3/4F FW-KY105-2012F 20X1/2F FW-KY105-2534F 25X3/4F Equal Elbow FW-KY106-L1616 L 16X16 FW-KY106-L2020 L 20X20 FW-KY106-L2525 L 25X25 FW-KY106-L3232 L 32X32 Female Elbow FW-KY107-L1612F L 16X1/2 F FW-KY107-L1634F L 16X3/4 F FW-KY107-L2012F L 20X1/2 F FW-KY107-L2034F L 20X3/4 F FW-KY107-L2534F L 25X3/4 F FW-KY107-L2511F L 25X1 F FW-KY107-L3211F L 32X1 F Male Elbow FW-KY108-L1612M L16x1/2M FW-KY108-L2012M L20x1/2M FW-KY108-L2034M L20X3/4M FW-KY108-L2534M L25x3/4M FW-KY108-L3211M L32x1M Swivel Elbow FW-KY109-1612F 16X1/2F FW-KY109-2034F 20X3/4F Equal Tee FW-KY110-T161616 T 16X16X16 FW-KY110-T202020 T 20X20X20 FW-KY110-T252525 T 25X25X25 FW-KY110-T323232 T 32X32X32 Unequal Tee FW-KY111-T162016 T 16X20X16 FW-KY111-T201616 T 20X16X16 FW-KY111-T201620 T20X16X20 FW-KY111-T202016 T20X20X16 FW-KY111-T251625 T 25X16X25 FW-KY111-T252516 T 25X25X16 FW-KY111-T251616 T25X16X16 FW-KY111-T252020 T 25X20X20 FW-KY111-T252025 T 25X20X25 FW-KY111-T321632 T32X16X32 FW-KY111-T322032 T32X20X32 FW-KY111-T322525 T32X25X25 FW-KY111-T322532 T32X25X32 Female Tee FW112-T2512F25 T25X1/2FX25 Elbow With Plate-Male FW-KY114-1612M 16X1/2M FW-KY114-1634M 16X3/4 M FW-KY114-2034M 20X3/4 M Elbow with Plate-Female FW-KY115-1612F 16X1/2 F FW-KY115-1634F 16X3/4F FW-KY115-2012F 20X1/2F FW-KY115-2034F 20X3/4F End cap FW-KY116-16 16 FW-KY116-20 20 FW-KY116-25 25 ‘ZL' range of PERT/AL/PERT multi-layer pipes. PERTPIPE50M 16*2.0 PERTPIPE60M 16*2.0 PERTPIPE70M 16*2.0 PERTPIPE 80M 16*2.0 PERTPIPE90M 16*2.0 PERTPIPE100M 16*2.0 PERTPIPE110M 16*2.0 PERTPIPE120M 16*2.0 PERTPIPE150M 16*2.0 PERTPIPE200M 16*2.0

Approval Holder:

Fastwarm Limited

Company Name

Fastwarm Limited

Address

Unit 13 Carnival Park Basildon Essex

Postcode

SS14 3WN

Phone

01228 744 479

General Email

support@fastwarm.com

View All Listings by this Company

Range of ‘M’ profile copper press fittings with EPDM ‘O’-rings for use with copper pipes (manufactured to EN 1057). Jointing is achieved via a crimping tool using a ‘M’ profile. For above and below ground use. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251015011

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Linhai Hengye Tubing Equipment Co., Ltd logo (‘IoJ’) and size on body.

Installation Requirements:

R001

Expiry date:

31/10/2030

Model:

P5270 series - Coupling: P527012: 12mm, P527015: 15mm, P527018: 18mm, P527022: 22mm, P527028: 28mm, P527035: 35mm, P527042: 42mm, P527054: 54mm. P5270S series - Slip coupling: P5270S12: 12mm, P5270S15: 15mm, P5270S18: 18mm, P5270S22: 22mm, P5270S28: 28mm, P5270S35: 35mm, P5270S42: 42mm, P5270S54: 54mm. P5240 series - Reducing coupling: P52402215: 22x15mm, P52402815: 28x15mm, P52402822: 28x22mm, P52403515: 35x15mm, P52403522: 35x22mm, P52403528: 35x28mm, P52404222: 42x22mm, P52404228: 42x28mm, P52404235: 42x35mm, P52405428: 54x28mm, P52405435: 54x35mm, P52405442: 54x42mm. P5243 series - Fitting Reducer: P52431512: 15x12mm, P52431812: 18x12mm, P52431815: 18x15mm, P52432215: 22x15mm, P52432218: 22x18mm, P52432815: 28x15mm, P52432818: 28x18mm, P52432822: 28x22mm, P52433515: 35x15mm, P52433518: 35x18mm, P52433522: 35x22mm, P52433528: 35x28mm, P52434215: 42x15mm, P52434218: 42x18mm, P52434222: 42x22mm, P52434228: 42x28mm, P52434235: 42x35mm, P52435415: 54x15mm, P52435418: 54x18mm, P52435422: 54x22mm, P52435428: 54x28mm, P52435435: 54x35mm, P52435442: 54x42mm. P5090 series - Reducing elbow 90°: P50902215: 22x15mm, P50902815: 28x15mm, P50902822: 28x22mm. P5085 series - Full Crossover: P508515: 15mm, P508522: 22mm. P5086 series - Part Crossover: P508615: 15mm, P508622: 22mm. P5090 series - Elbow 90°: P509012: 12mm, P509015: 15mm, P509018: 18mm, P509022: 22mm, P509028: 28mm, P509035: 35mm, P509042: 42mm, P509054: 54mm. P5092 series - Street elbow 90°: P509212: 12mm, P509215: 15mm, P509218: 18mm, P509222: 22mm, P509228: 28mm, P509235: 35mm, P509242: 42mm, P509254: 54mm. P5041 series - Elbow 45°: P504112: 12mm, P504115: 15mm, P504118: 18mm, P504122: 22mm, P504128: 28mm, P504135: 35mm, P504142: 42mm, P504154: 54mm. P5040 series - Street elbow 45°: P504012: 12mm, P504015: 15mm, P504018: 18mm, P504022: 22mm, P504028: 28mm, P504035: 35mm, P504042: 42mm, P504054: 54mm. P5130 series - Equal tee: P513012: 12mm, P513015: 15mm, P513018: 18mm, P513022: 22mm, P513028: 28mm, P513035: 35mm, P513042: 42mm, P513054: 54mm. P5130 series - Reducing tee: P5130151212: 15x12x12mm, P5130151215: 15x12x15mm, P5130151815: 15x18x15mm, P5130152215: 15x22x15mm, P5130181218: 18x12x18mm, P5130181515: 18x15x15mm, P5130181518: 18x15x18mm, P5130181815: 18x18x15mm, P5130221222: 22x12x22mm, P5130221522: 22x15x22mm, P5130221822: 22x18x22mm, P5130221515: 22x15x15mm, P5130222215: 22x22x15mm, P5130281528: 28x15x28mm, P5130281828: 28x18x28mm, P5130282228: 28x22x28mm, P5130351535: 35x15x35mm, P5130351835: 35x18x35mm, P5130352235: 35x22x35mm, P5130352835: 35x28x35mm, P5130351515: 35x15x15mm, P5130351518: 35x15x18mm, P5130351522: 35x15x22mm, P5130351528: 35x15x28mm, P5130351815: 35x18x15mm, P5130351818: 35x18x18mm, P5130351822: 35x18x22mm, P5130351828: 35x18x28mm, P5130352215: 35x22x15mm, P5130352218: 35x22x18mm, P5130352222: 35x22x22mm, P5130352228: 35x22x28mm, P5130352815: 35x28x15mm, P5130352818: 35x28x18mm, P5130352822: 35x28x22mm, P5130352828: 35x28x28mm, P5130353515: 35x35x15mm, P5130353518: 35x35x18mm, P5130353522: 35x35x22mm, P5130353528: 35x35x28mm, P5130421542: 42x15x42mm, P5130421842: 42x18x42mm, P5130422242: 42x22x42mm, P5130422842: 42x28x42mm, P5130423542: 42x35x42mm, P5130421515: 42x15x15mm, P5130421518: 42x15x18mm, P5130421522: 42x15x22mm, P5130421528: 42x15x28mm, P5130421535: 42x15x35mm, P5130421815: 42x18x15mm, P5130421818: 42x18x18mm, P5130421822: 42x18x22mm, P5130421828: 42x18x28mm, P5130421835: 42x18x35mm, P5130422215: 42x22x15mm, P5130422218: 42x22x18mm, P5130422222: 42x22x22mm, P5130422228: 42x22x28mm, P5130422235: 42x22x35mm, P5130422815: 42x28x15mm, P5130422818: 42x28x18mm, P5130422822: 42x28x22mm, P5130422828: 42x28x28mm, P5130422835: 42x28x35mm, P5130423515: 42x35x15mm, P5130423518: 42x35x18mm, P5130423522: 42x35x22mm, P5130423528: 42x35x28mm, P5130423535: 42x35x35mm, P5130424215: 42x42x15mm, P5130424218: 42x42x18mm, P5130424222: 42x42x22mm, P5130424228: 42x42x28mm, P5130424235: 42x42x35mm, P5130541554: 54x15x54mm, P5130541854: 54x18x54mm, P5130542254: 54x22x54mm, P5130542854: 54x28x54mm, P5130543554: 54x35x54mm, P5130544254: 54x42x54mm, P5130541515: 54x15x15mm, P5130541518: 54x15x18mm, P5130541522: 54x15x22mm, P5130541528: 54x15x28mm, P5130541535: 54x15x35mm, P5130541542: 54x15x42mm, P5130541815: 54x18x15mm, P5130541818: 54x18x18mm, P5130541822: 54x18x22mm, P5130541828: 54x18x28mm, P5130541835: 54x18x35mm, P5130541842: 54x18x42mm, P5130542215: 54x22x15mm, P5130542218: 54x22x18mm, P5130542222: 54x22x22mm, P5130542228: 54x22x28mm, P5130542235: 54x22x35mm, P5130542242: 54x22x42mm, P5130542815: 54x28x15mm, P5130542818: 54x28x18mm, P5130542822: 54x28x22mm, P5130542828: 54x28x28mm, P5130542835: 54x28x35mm, P5130542842: 54x28x42mm, P5130543515: 54x35x15mm, P5130543518: 54x35x18mm, P5130543522: 54x35x22mm, P5130543528: 54x35x28mm, P5130543535: 54x35x35mm, P5130543542: 54x35x42mm, P5130544215: 54x42x15mm, P5130544218: 54x42x18mm, P5130544222: 54x42x22mm, P5130544228: 54x42x28mm, P5130544235: 54x42x35mm, P5130544242: 54x42x42mm, P5130545415: 54x54x15mm, P5130545418: 54x54x18mm, P5130545422: 54x54x22mm, P5130545428: 54x54x28mm, P5130545435: 54x54x35mm, P5130545442: 54x54x42mm. P5301 series - End cap: P530112: 12mm, P530115: 15mm, P530118: 18mm, P530122: 22mm, P530128: 28mm, P530135: 35mm, P530142: 42mm, P530154: 54mm.

Approval Holder:

Linhai Hengye Tubing Equipment Co., Ltd

Company Name

Linhai Hengye Tubing Equipment Co., Ltd

Address

Machinery Industrial Park, Duqiao Town, Linhai City

Country

China

Phone

0086‐576‐85528079

General Email

sales@zjhengye.com

View All Listings by this Company

Manufacturer:

Linhai Hengye Tubing Equipment Co., Ltd

Company Name

Linhai Hengye Tubing Equipment Co., Ltd

Address

Machinery Industrial Park, Duqiao Town, Linhai City

Country

China

Phone

0086‐576‐85528079

General Email

sales@zjhengye.com

View All Listings by this Company

'Flomasta’ range of push-fit fittings with PEX-b, polysulphone or PPE bodies, supplied with polysulphone inserts. For use with PEX pipe (manufactured to BSEN 7291 part 3), PB (manufactured to BSEN 7291 part 2) and copper pipe (EN1057). Maximum working pressure/temperature: 12.5 Bar @ 20°C. As of October 2025: Maximum working pressure/temperature 3 Bar @ 92°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

250602053

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

10mm, 15mm, 22mm, 28mm

Marking:

TLC (TwistLoc logo) and size on body

Installation Requirements:

R001

Expiry date:

30/06/2030

Model:

‘Flomasta’ range comprising of models: SRDE6764M 15mmX1/2"BSP DROP EAR ELBOW SRF6764M 15mmX1/2"BSP FEMALE ADAPTOR SRF6765M 15mmX3/4"BSP FEMALE ADAPTOR SRF6745M 22mmX3/4"BSP FEMALE ADAPTOR SRF6701M 28mmX1"BSP FEMALE ADAPTOR SPU6711M 10mm STR UNION SPU6766M 15mm STR UNION SPU6744M 22mm STR UNION SPU6700M 28mm STR UNION SPU6761M 15mmX10mm REDUCING STR UNION SPU6746M 22mmX15mm REDUCING STR UNION SRSE6714M 10mmX1/2"BSP SWIVEL ELBOW (Hand Tighten) SRSE6764M 15mmX1/2"BSP SWIVEL ELBOW (Hand Tighten) SRSE6765M 15mmX3/4"BSP SWIVEL ELBOW (Hand Tighten) SRSE6714BM 10mmX1/2"BSP SWIVEL ELBOW (Brass Nut) SRSE6764BM 15mmX1/2"BSP SWIVEL ELBOW (Brass Nut) SRSE6765BM 15mmX3/4"BSP SWIVEL ELBOW (Brass Nut) SPSU6714M 10mmX1/2"BSP SWIVEL UNION (Hand Tighten) SRSU6764M 15mmX1/2"BSP SWIVEL UNION (Hand Tighten) SRSU6765M 15mmX3/4"BSP SWIVEL UNION (Hand Tighten) SPSU6745M 22mmX3/4"BSP SWIVEL UNION (Hand Tighten) SPSU6714BM 10mmX1/2"BSP SWIVEL UNION (Brass Nut) SRSU6764BM 15mmX1/2"BSP SWIVEL UNION (Brass Nut) SRSU6765BM 15mmX3/4"BSP SWIVEL UNION (Brass Nut) SPSU6745BM 22mmX3/4"BSP SWIVEL UNION (Brass Nut) SPST671M 10mm END STOP SPST676M 15mm END STOP SPST674M 22mm END STOP SRST670M 28mm END STOP SPE6711M 10mm ELBOW SPE6766M 15mm ELBOW SPE6744M 22mm ELBOW SPE6700M 28mm ELBOW SPE6761M 15mmX10mm REDUCING ELBOW SPE6746M 22mmX15mm REDUCING ELBOW SPATE6766M 15mm-135o STEM ELBOW SPATE6744M 22mm-135o STEM ELBOW SPR6716M 10mmX15mm REDUCER SPR6764M 15mmX22mm REDUCER SPR6760M 15mmX28mm REDUCER SPR6740M 22mmX28mm REDUCER SPT67111M 10mm TEE SPT67666M 15mm TEE SPT67444M 22mm TEE SPT67000M 28mm TEE SPT67611M 15mmX10mmX10mm REDUCING TEE SPT67661M 15mmX15mmX10mm REDUCING TEE SPT67664M 15mmX15mmX22mm REDUCING TEE SPT67466M 22mmX15mmX15mm REDUCING TEE SPT67464M 22mmx15mmx22mm REDUCING TEE SPT67441M 22mmx22mmx10mm REDUCING TEE SPT67446M 22mmX22mmX15mm REDUCING TEE SPT67044M 28mmX22mmX22mm REDUCING TEE SPT67040M 28mmX22mmX28mm REDUCING TEE SPT67001M 28mmX28mmX10mm REDUCING TEE SPT67006M 28mmX28mmX15mm REDUCING TEE SPT67004M 28mmX28mmX22mm REDUCING TEE SPTT67441M 22mX22mmX10mm TUBE TEE SPTT67446M 22mX22mmX15mm TUBE TEE SPTE6711M 10mm TUBE ELBOW SPTE6716M 10mmx15mm TUBE ELBOW SPTE6766M 15mm TUBE ELBOW SPTE6744M 22mm TUBE ELBOW SRMC6764M 15mmX1/2"BSPT MALE CONNECTOR SRME6764M 15mmX1/2"BSPT MALE ELBOW SRFWC6741M 22mmX10mm 4WAY MANIFOLD SRU6766SM 15mm SLIP UNION SRU6744SM 22mm SLIP UNION STS10M 10mm PIPE INSERT STS15M 15mm PIPE INSERT STS22M 22mm PIPE INSERT STS28M 28mm PIPE INSERT SRAV63M 15mm AIR-VENT CONNECTOR

Approval Holder:

Kingfisher International Products Ltd

Company Name

Kingfisher International Products Ltd

Address

1 Paddington Square, London

Postcode

W2 1GG

Phone

07721 260713

General Email

eric.capotummino@kingfisher.com

View All Listings by this Company

Manufacturer:

SNC Corporation

Company Name

SNC Corporation

Address

30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon

Postcode

22825

Country

South Korea

Phone

+82-70-8795-3200

General Email

nchoi@twistloc.com

View All Listings by this Company

Manufacturer:

SNC Corporation

Company Name

SNC Corporation

Address

30, Baekbeom-ro, 678 beon-gil, Seo-gu, Incheon

Postcode

22825

Country

South Korea

Phone

+82-70-8795-3200

General Email

nchoi@twistloc.com

View All Listings by this Company