Range of polypropylene push-fit fittings. The 20, 25 and 32mm sizes are for use with MDPE Pipe (manufactured to BS EN 12201-2). The 15, 22 and 28mm connections are for use with the following pipes: PEX (manufactured to BS 7291-3) for 15, 22 and 28mm sizes. PB (manufactured to BS 7291-2) and Copper (manufactured to BS EN 1057) for 15 and 22mm sizes only. Maximum working pressures: UG601B model: 16.0 bar. All other models: 12.5 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

260202004

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

The blue (UTS) and beige (TSM) pipe inserts must be used to maintain the validity of this approval.

Size:

See model.

Marking:

PN, JG & size on body. JG on pipe inserts.

Installation Requirements:

R001

Expiry date:

28/02/2031

Model:

Couplers: UG601B: 20 x 15MM PE-COPPER COUPLER, UG602B: 25 x 22Mm PE-COPPER COUPLER, UG603B: 25 x 15MM PE-COPPER COUPLER, UG604B: 32 x 28MM PE-COPPER COUPLER, UG063228B: 32 x 28MM REDUCER. Pipe inserts (blue) for use with MDPE pipe: UTS147-DB 20MM pipe insert, UTS197-DB 25MM pipe insert, UTS251-DB 32MM pipe insert. Pipe inserts (beige) for use with PB or PEX pipe: TSM15N 15MM pipe insert, TSM22N 22MM pipe insert. Pipe inserts (beige) for use with PEX pipe: TSM28N 28MM pipe insert.

Approval Holder:

Reliance Worldwide Corporation (UK)

Company Name

Reliance Worldwide Corporation (UK)

Address

Horton Road, West Drayton

Postcode

UB7 8JL

Country

United Kingdom

Phone

+44 7730 052060

General Email

PETER.LANCASTER@RWC.COM

View All Listings by this Company

Range of brass press fittings with EPDM ‘O’-rings for use with copper pipe (manufactured to EN1057). Jointing is achieved via a crimping tool using a ‘M’ profile. For above and below ground use. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251115005

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Taizhou Double Winners Copper Co., Ltd logo (dbw in a box) and size on body.

Installation Requirements:

R001

Expiry date:

30/11/2030

Model:

6243G Coupler Male: 15x1/2", 15x3/4", 22x1/2", 22x3/4", 22x1", 28x3/4", 28x1", 35x1", 35x11/4", 42x11/2", 54x2". 6270G Coupler Female: 15x1/2", 15x3/4", 22x1/2", 22x3/4", 22x1", 28x3/4", 28x1", 35x1", 35x11/4", 42x11/2", 54x2". 6359G Straight Swivel: 15x1/2", 15x3/4", 22x1/2", 22x3/4", 22x1", 28x1", 28x11/4". 6092G Male Elbow: 15x1/2", 15x3/4", 22x3/4", 22x1", 28x1". 6090G Female Elbow: 15x1/2", 15X3/4", 22x3/4", 22x1", 28x1". 6472G Female Wallplate Elbow: 15x1/2", 22x3/4". 6130G Branch Tee (left x right x middle): 15x15x1/2", 22x22x1/2", 22x22x3/4", 28x28x1/2", 28x28x3/4", 28x28x1", 35x35x1/2", 35x35x3/4", 35x35x1", 42x42x1/2", 54x54x1/2". 6246G Female Adaptor: 1/2"x15, 3/4"x22. 6361G Male Union: 15x1/2", 22x3/4", 28x1". 6330G Female Union: 15x1/2", 22x3/4", 28x1". Models added December 2025 6330 Straight Union 15mm 22mm 28mm 35mm 42mm 54mm 6280 Male Adaptor 12x1/2" 15x1/2" 18x1/2" 22x1/2" 22x3/4" 28x1"

Approval Holder:

Taizhou Double Winners Copper Co., Ltd

Company Name

Taizhou Double Winners Copper Co., Ltd

Address

Room 902, No.185-1 Wenxue Road, Jiazhi Street, Jiaojiang, Taizhou, Zhejiang

Postcode

31800

Country

China

General Email

info@double‐winners.com

View All Listings by this Company

“>B<Press NZ” range of press fittings incorporating copper (EN12165 CW024A) or copper alloy (CC499K-DW) bodies. For use with copper tube (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251108015

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

>B< (Conex logo) & size on body.

Installation Requirements:

R001

Expiry date:

30/11/2030

Model:

Copper alloy bodies: PIR4090G; - Threaded Elbow PIR4090G040400 – ½” x ½” BSP (F), PIR4090G060600 – ¾” x ¾” BSP (F). PIR4092G; - Press Elbow PIR4092G040400 – ½” x ½”, PIR4092G060600 – ¾” x ¾”. PIR4243G; - Male Adaptor PIR4243G040400 – ½” x ½” BSP (M), PIR4243G040600 – ½” x ¾” BSP (M), PIR4243G060400 – ¾” x ½” BSP (M), PIR4243G060600 – ¾” x ¾” BSP (M), PIR4243G080600 – 1” x ¾” BSP (M), PIR4243G080800 – 1” x 1” BSP (M). PIR4471G; - Female Wallplate Elbow PIR4471G040400 – ½” x ½” BSP (F), PIR4471G060600 – ¾” – ¾” BSP (F). PIR4473G; - Male Wall plate Elbow PIR4473G040400 – ½” BSP (M). PIR4270G; - Female Adaptor PIR4270G040400 – ½” x ½” BSP (M), PIR4270G060600 – ¾” x ¾” BSP (M), PIR4270G080800 – 1” x 1” BSP (M). Copper bodies: PIR5040; - 45° Street Elbow PIR5040 040000 – ½”, PIR5040 060000 – ¾”, PIR5040 080000 – 1”. PIR5001; - 90° Street Bend PIR5001 040000 – ½”, PIR5001 060000 – ¾”, PIR5001 080000 – 1”. PIR5240; - Reducing Coupler PIR5240 060400 – ¾” x ½”, PIR5240 080400 – 1” x ½”, PIR5240 080600 – 1” x ¾”. PIR5130; - Tee Reduced PIR5130 060604 – ¾” x ¾” x ½”. PIR5002; - 90° Bend PIR5002 040000 – ½”, PIR5002 060000 – ¾”, PIR5002 080000 – 1”. PIR5041; - 45° Elbow PIR5041 040000 – ½”, PIR5041 060000 – ¾”, PIR5041 080000 – 1”. PIR5130; - Equal Tee PIR5130 040000 – ½”, PIR5130 060000 – ¾”, PIR5130 080000 – 1”. PIR5270; - Coupler PIR5270 040000 – ½” PIR5270 060000 – ¾” PIR5270 080000 – 1” PIR5301; – Stop End PIR5301 040000 – ½”, PIR5301 060000 – ¾”, PIR5301 080000 – 1”. PIR5130RB; - Tee Reduced Branch PIR5130 060406 – ¾” x ½” x ¾” PIR5130 080408 – 1” x ½” x 1” PIR5130 080608 – 1” x ¾” x 1” PIR5275; - Slip Coupler PIR5275 040000 – ½” PIR5275 060000 – ¾” PIR5275 080000 – 1” PIR5243; - Fitting Reducer PIR5243 060400 – ¾” x ½”, PIR5243 080400 – 1” x ½”, PIR5243 080600 – 1” x ¾”. PIR5130REB - Tee Reduced End & Branch PIR5130 060404 – ¾” x ½” x ½”, PIR5130 080806 – 1” X 1” X ¾”, PIR5130 040604 – ½” X ¾” X ½”, PIR5130 060806 – ¾“ X 1” X ¾”, PIR5130 040804 – ½” X 1” X ½”, PIR5130 080404 – 1” X ½” X ½”, PIR5130 080604 – 1” X ¾” X ½”, PIR5130 080406 – 1” X ½” X ¾”.

Approval Holder:

Conex Universal Limited

Company Name

Conex Universal Limited

Address

Unit 95, Vantage Point Kingswinford

Postcode

DY6 7FT

Country

United Kingdom

Phone

+44 (0)121 5772831

General Email

Christopher.Harte@IBPGroup.com

View All Listings by this Company

Manufacturer:

IBP Atcosa S.L & IBP Instalfittings Sp z o.o.,

Company Name

IBP Atcosa S.L & IBP Instalfittings Sp z o.o.,

Address

IBP Atcosa S.L - Polígono Industrial Quintos-Aeropuerto, 14005 Córdoba Spain & IBP Instalfittings Sp z o.o., - ul. Stanisława Zwierzchowskiego 29, 61-249 Poznań, Poland

General Email

View All Listings by this Company

Range of copper press fittings (‘M’ type crimp profile) and brass threaded adaptor fittings, for use with copper pipe (manufactured to EN1057). Maximum working pressure and operating temperatures: 16.0 bar @ 30°C and 10.0 bar @ 95°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240904040

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

15mm - 54mm, ½” - 2” BSP. Sizes added December 2024: 66.7mm - 108mm. 2½” - 4” BSP.

Marking:

"CORE" and size, EN1253 & batch number on fitting.

Installation Requirements:

R001

Expiry date:

30/09/2029

Model:

Copper Coupler: CCP1015 - 15mm x 15mm, CCP1022 - 22mm x 22mm, CCP1028 - 28mm x 28mm, CCP1035 - 35mm x 35mm, CCP1042 - 42mm x 42mm, CCP1054 - 54mm x 54mm, CCP1067 - 66.7mm x 66.7mm, CCP1076 - 76.1mm x 76.1mm, CCP1108 - 108mm x 108mm. Copper Elbow: CCP12015 - 15mm x 15mm, CCP12022 - 22mm x 22mm, CCP12028 - 28mm x 28mm, CCP12035 - 35mm x 35mm, CCP12042 - 42mm x 42mm, CCP12054 - 54mm x 54mm, CCP12067 - 66.7mm x 66.7mm, CCP12076 - 76.1mm x 76.1mm, CCP12108 - 108mm x 108mm. Copper 90 Degree Street Elbow: CCP12S015 - 15mm x 15mm, CCP12S022 - 22mm x 22mm, CCP12S028 - 28mm x 28mm, CCP12S035 - 35mm x 35mm, CCP12S042 - 42mm x 42mm, CCP12S054 - 54mm x 54mm, CCP12S067 - 66.7mm x 66.7mm, CCP12S076 - 76.1mm x 76.1mm, CCP12S108 - 108mm x 108mm. Copper 45 Degree Elbow: CCP21015 - 15mm x 15mm, CCP21022 - 22mm x 22mm, CCP21028 - 28mm x 28mm, CCP21035 - 35mm x 35mm, CCP21042 - 42mm x 42mm, CCP21054 - 54mm x 54mm, CCP21067 - 66.7mm x 66.7mm, CCP21076 - 76.1mm x 76.1mm, CCP21108 - 108mm x 108mm. Copper 45 Degree Street Elbow: CCP21S015 - 15mm x 15mm, CCP21S022 - 22mm x 22mm, CCP21S028 - 28mm x 28mm, CCP21S035 - 35mm x 35mm, CCP21S042 - 42mm x 42mm, CCP21S054 - 54mm x 54mm, CCP21S067 - 66.7mm x 66.7mm, CCP21S076 - 76.1mm x 76.1mm, CCP21S108 - 108mm x 108mm. Copper Fitting Reducer: CCP6022015 - 22mm x 15mm, CCP6028015 - 28mm x 15mm, CCP6028022 - 28mm x 22mm, CCP6035022 - 35mm x 22mm, CCP6035028 - 35mm x 28mm, CCP60042022 - 42mm x 22mm, CCP6042028 - 42mm x 28mm, CCP6042035 - 42mm x 35mm, CCP6054028 - 54mm x 28mm, CCP6054035 - 54mm x 35mm, CCP6054042 - 54mm x 42mm, CCP6067028 - 66.7mm x 28mm, CCP6067035 - 66.7mm x 35mm, CCP6067042 - 66.7mm x 42mm, CCP6067054 - 66.7mm x 54mm, CCP6076035 - 76.1mm x 35mm, CCP6076042 - 76.1mm x 42mm, CCP6076054 - 76.1mm x 54mm, CCP6076067 - 76.1mm x 66.7mm, CCP6108042 - 108mm x 42mm, CCP6108054 - 108mm x 54mm, CCP6108067- 108mm x 66.7mm, CCP6108076 - 108mm x 76.1mm. Copper Equal Tee: CCP24015 - 15mm x 15mm x 15mm, CCP24022 - 22mm x 22mm x 22mm, CCP24028 - 28mm x 28mm x 28mm, CCP24035 - 35mm x 35mm x 35mm, CCP24042 - 42mm x 42mm x 42mm, CCP24054 - 54mm x 54mm x 54mm, CCP24067 - 66.7mm x 66.7mm x 66.7mm, CCP24076 - 76.1mm x 76.1mm x 76.1mm, CCP24108 - 108mm x 108mm x 108mm. Copper Reducer Tee: CCP28015015022 - 15mm x 15mm x 22mm, CCP27022015015 - 22mm x 15mm x 15mm, CCP26022015022 - 22mm x 15mm x 22mm, CCP25022015 - 22mm x 22mm x 15mm, CCP28022022028 - 22mm x 22mm x 28mm, CCP26028015028 - 28mm x 15mm x 28mm, CCP27028022015- 28mm x 22mm x 15mm, CCP27028022022 - 28mm x 22mm x 22mm, CCP26028022028 - 28mm x 22mm x 28mm, CCP25028015- 28mm x 28mm x 15mm, CCP25028022 - 28mm x 28mm x 22mm, CCP28028028035 - 28mm x 28mm x 35mm, CCP27035022022 - 35mm x 22mm x 22mm, CCP26035022035 - 35mm x 22mm x 35mm, CCP27035028022 - 35mm x 28mm x 22mm, CCP27035028028 - 35mm x 28mm x 28mm, CCP26035028035 - 35mm x 28mm x 35mm, CCP25035015 - 35mm x 35mm x 15mm, CCP25035022 - 35mm x 35mm x 22mm, CCP25035028 - 35mm x 35mm x 28mm, CCP27042035035 - 42mm x 35mm x 35mm, CCP25042015 - 42mm x 42mm x 15mm, CCP25042022- 42mm x 42mm x 22mm, CCP25042028 - 42mm x 42mm x 28mm, CCP25042035 - 42mm x 42mm x 35mm, CCP25054022 - 54mm x 54mm x 22mm, CCP25054028 - 54mm x 54mm x 28mm, CCP25054035 - 54mm x 54mm x 35mm, CCP25054042 - 54mm x 54mm x 42mm. Reducer Tee: CCP25067028- 66.7mm x 66.7mm x 28mm, CCP25067035 - 66.7mm x 66.7mm x 35mm, CCP25067042 - 66.7mm x 66.7mm x 42mm, CCP25067054 - 66.7mm x 66.7mm x 54mm, CCP25076022 - 76.1mm x 76.1mm x 22mm, CCP25076028 - 76.1mm x 76.1mm x 28mm, CCP25076035 - 76.1mm x 76.1mm x 35mm, CCP25076042 - 76.1mm x 76.1mm x 42mm, CCP25076054 - 76.1mm x 76.1mm x 54mm, CCP250108054 - 108mm x 108mm x 54mm, CCP250108067 - 108mm x 108mm x 66.7mm, CCP250108076 - 108mm x 108mm x 76.1mm. Copper End Cap: CCP61015 - 15mm, CCP61022 - 22mm, CCP61028 - 28mm, CCP61035 - 35mm, CCP61042 - 42mm, CCP61054 - 54mm, CCP61067 - 66.7mm, CCP61076 - 76.1mm, CCP61108 - 108mm. Copper Slip Coupler: CCP1S015 - 15mm x 15mm, CCP1S022 - 22mm x 22mm, CCP1S028 - 28mm x 28mm, CCP1S035 - 35mm x 35mm, CCP1S042 - 42mm x 42mm, CCP1S054 - 54mm x 54mm, CCP1S067 - 66.7mm x 66.7mm, CCP1S076 - 76.1mm x 76.1mm, CCP1S108 - 108mm x 108mm. Brass Male Adaptor: CCP3015 - 15mm x 1/2", CCP3015020 - 15mm x 3/4", CCP3022- 22mm x 1/2", CCP3022015 - 22mm x 3/4", CCP3022025 - 22mm x 1", CCP3028 - 28mm x 1", CCP3035 - 35mm x 1.1/4", CCP3042 - 42mm x 1.1/2", CCP3054- 54mm x 2", CCP3067 - 66.7mm x 2.1/2", CCP3076065 - 76.1mm x 2.1/2", CCP3076 - 76.1mm x 3", CCP3108 - 108mm x 4". Brass Female Adaptor: CCP2015 - 15mm x 1/2", CCP2022015 - 22mm x 1/2", CCP2022 - 22mm x 3/4", CCP2028 - 28mm x 1", CCP2035 - 35mm x 1.1/4", CCP2042 - 42mm x 1.1/2", CCP2054 - 54mm x 2", CCP2076065 - 76.1mm x 2.1/2", Brass Female Tee: CCP30015 - 15mm x 15mm x 1/2", CCP30022015 - 22mm x 22mm x 1/2", CCP30022020 - 22mm x 22mm x 3/4", CCP30028015 - 28mm x 28mm x 1/2", CCP30028020 - 28mm x 28mm x 3/4", CCP30035015 - 35mm x 35mm x 1/2", CCP30042015 - 42mm x 42mm x 1/2", CCP30054015- 54mm x 54mm x 1/2", CCP30076015 - 76.1mm x 76.1mm x 1/2", CCP30076020 - 76.1mm x 76.1mm x 3/4". Brass Straight Swivel Connector: CCP68015 - 15mm x 3/4", CCP68022025 - 22mm x 1", CCP68022 - 22mm x 3/4", Brass Male Elbow: CCP13015- 15mm x 1/2", CCP13022 - 22mm x 3/4", CCP13028 - 28mm x 1", CCP13035 - 35mm x 1.1/4", CCP13042 - 42mm x 1.1/2", CCP13054 - 54mm x 2", CCP14015- 15mm x 1/2", CCP14022 - 22mm x 3/4", CCP14028 - 28mm x 1", CCP14035 - 35mm x 1.1/4", CCP14042 - 42mm x 1.1/2", CCP14054 - 54mm x 2", CCP15015 - 15mm x 1/2", Brass Union Coupler: CCP11015 - 15mm, CCP11022 - 22mm, CCP11028 - 28mm, CCP11035 - 35mm, CCP11042 - 42mm, CCP11054 - 54mm. Male Insert Adaptor: CCP8015 - 15mm x 1/2", CCP022- 22mm x 3/4", CCP028 - 28mm x 1", CCP035 - 35mm x 1.1/4", CCP8042 - 42mm x 1.1/2", CCP8054 - 54mm x 2". Female Insert Adaptor: CCP7015- 15mm x 1/2", CCP7022 - 22mm x 1/2", CCP7022015 - 22mm x 3/4", CCP7028 - 28mm x 1", CCP7035 - 35mm x 1.1/4", CCP7042 - 42mm x 1.1/2", CCP7054 - 54mm x 2". Brass Male Union: CCP69015 - 15mm x 1/2", CCP69022 - 22mm x 3/4", CCP69028 - 28mm x 1", CCP69035 - 35mm x 1.1/4", CCP69042 - 42mm x 1.1/2", CCP69054 - 54mm x 2". Brass Female Union: CCP69F015 - 15mm x 1/2", CCP69F022 - 22mm x 3/4", CCP69F028 - 28mm x 1", CCP69F035- 35mm x 1.1/4", CCP69F042 - 42mm x 1.1/2", CCP69F054 - 54mm x 2". Dual Port Tee: CCP32067015 - 66.7mm x 66.7mm x 1/2", CCP32076015- 76.1mm x 76.1mm x 1/2", CCP32108020 - 108mm x 108mm x 1/2".

Approval Holder:

Smith Brothers Stores Limited

Company Name

Smith Brothers Stores Limited

Address

Unit V2 Winchester Avenue, Blaby, Leicester

Postcode

LE8 4GZ

Phone

0116 222 7330

General Email

kel.phillips@sbs.co.uk

View All Listings by this Company

Range of water meter measuring capsules with brass bodies. Maximum working pressure 16.0 bar. Please refer to model for maximum operating temperature.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

2" BSP male & 2¼” BSP male. M62 x 2 male, M64 x 2 male & M65 x 2 male.

Marking:

Zenner, model, year of manufacture (YYYY) and technical information on meter face.

Installation Requirements:

R001

Expiry date:

31/10/2030

Model:

Maximum operating temperature 30°C: 129285 Minolist Q3-2.5. 166599 – Minomuk Q3-2.5. 166487 – Minotec Q3-2.5. 166489 – Minomoc Q3-2.5. 166489 + 128767 - Minomoc with Konverter Q3-2.5. 166597 – Minomet Q3-2.5. Maximum operating temperature 90°C: 129286 – Minolist Q3-2.5. 166600 – Minomuk Q3-2.5. 166488 – Minotec Q3-2.5. 166490 – Minomoc Q3-2.5. 166490 + 128767 - Minomoc with Konverter Q3-2.5. 166598 – Minomet Q3-2.5.

Approval Holder:

Zenner International Gmbh & Co. KG

Company Name

Zenner International Gmbh & Co. KG

Address

Heinrich‐Barth‐Str. 29, 66115 Saarbrücken, Germany

Country

Germany

View All Listings by this Company

Range of water meters with brass bodies. The inlet incorporates a plastic strainer. Maximum working pressure 16.0 bar. Maximum operating temperature is 50°C or 85°C, please refer to model.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (M) or 1” BSP (M)

Marking:

Resideo and product information on face of water meter. Resideo, POWOGAZ & technical info label on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

Maximum operating temperature 50°C: EW1100AC060 EW1100AC2000 EW1050AP2000 EW1100AC1100 EW1100AC1200 EW1100CM1200 EW1050AP1200 EW1100CM2000 Maximum operating temperature 85°C: EW1101AC0600 EW1101AC1100 EW1101AC1200 EW1101AC1400 EW1051AP1200 EW1100AC1400 EW1101CM1200 EW1101AC2000 EW1101CM2000 EW1051AP2000

Approval Holder:

Pittway Sarl

Company Name

Pittway Sarl

Address

A3 - ZA La Pièce 6 1180 Rolle

Country

Switzerland

View All Listings by this Company

Manufacturer:

Apator Powogaz S.A.

Company Name

Apator Powogaz S.A.

Address

Jaryszki 1C, 62-023 Żerniki

Country

Poland

Phone

+48 789 454 593

View All Listings by this Company

Manufacturer:

Apator Powogaz S.A.

Company Name

Apator Powogaz S.A.

Address

Jaryszki 1C, 62-023 Żerniki

Country

Poland

Phone

+48 789 454 593

View All Listings by this Company

Range of water meter manifolds with plastic bodies, for use with MDPE pipe to BS EN 12201 pipe (for the push-fit models). The inlets incorporate a spherical valve and a non-return valve (not suitable for back flow protection). Maximum operating pressure 12.5 bar. Maximum operating temperature 23°C

Section:

1510 Water Meter Manifolds

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

25mm (push-fit), 32mm (push-fit), ¾” BSP.

Marking:

Ebco and flow arrow.

Installation Requirements:

R001

Expiry date:

31/03/2031

Model:

MB10112525BM, MB10113232AM, MB10220303BM.

Approval Holder:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

‘Hansen True Fit’ range of black coloured, plastic threaded fittings. Maximum working pressure 1/8” – 2” BSP: 16.0bar, 2½” BSP: 12.0bar, 3” – 4”: 10.0bar. Cold water and above ground use only.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1/8” to 4” BSP.

Marking:

Hansen & size on body. Hansen & model on adhesive label on body

Installation Requirements:

R001

Expiry date:

30/11/2030

Model:

‘Hansen True Fit’ range: HSN06 / SHN06 6mm Hex Nipple HSN08 / SHN08 8mm Hex Nipple HSN10 / SHN10 10mm Hex Nipple HSN15 / SHN15 15mm Hex Nipple HSN20 / SHN20 20mm Hex Nipple HSN25 / SHN25 25mm Hex Nipple HSN32 / SHN32 32mm Hex Nipple HSN40 / SHN40 40mm Hex Nipple HSN50 / SHN50 50mm Hex Nipple HSN65 / SHN65 65mm Hex Nipple HSN80 / SHN80 80mm Hex Nipple HSN100 / SHN100 100mm Hex Nipple HSS15 / SS15 15mm Socket HSS20 / SS20 20mm Socket HSS25 / SS25 25mm Socket HSS32 / SS32 32mm Socket HSS40 / SS40 40mm Socket HSS50 / SS50 50mm Socket HSS65 / SS65 65mm Socket HSS80 / SS80 80mm Socket HSS100 / SS100 100mm Socket HRHN0806 / SRHN0806 8x6mm Red. Hex Nipple HRHN10050 / SRHN10050 100x50mm Red. Hex Nipple HRHN1006 / SRHN1006 10x6mm Red. Hex Nipple HRHN10065 / SRHN10065 100x65mm Red. Hex Nipple HRHN1008 / SRHN1008 10x8mm Red. Hex Nipple HRHN10080 / SRHN10080 100x80mm Red. Hex Nipple HRHN1506 / SRHN1506 15x6mm Red. Hex Nipple HRHN1508 / SRHN1508 15x8mm Red. Hex Nipple HRHN1510 / SRHN1510 15x10mm Red. Hex Nipple HRHN2010 / SRHN2010 20x10mm Red. Hex Nipple HRHN2015 / SRHN2015 20x15mm Red. Hex Nipple HRHN2515 / SRHN2515 25x15mm Red. Hex Nipple HRHN2520 / SRHN2520 25x20mm Red. Hex Nipple HRHN3220 / SRHN3220 32x20mm Red. Hex Nipple HRHN3225 / SRHN3225 32x25mm Red. Hex Nipple HRHN4020 / SRHN4020 40x20mm Red. Hex Nipple HRHN4025 / SRHN4025 40x25mm Red. Hex Nipple HRHN4032 / SRHN4032 40x32mm Red. Hex Nipple HRHN5020 / SRHN5020 50x20mm Red. Hex Nipple HRHN5025 / SRHN5025 50x25mm Red. Hex Nipple HRHN5032 / SRHN5032 50x32mm Red. Hex Nipple HRHN5040 / SRHN5040 50x40mm Red. Hex Nipple HRHN6532 / SRHN6532 65x32mm Red. Hex Nipple HRHN6540 / SRHN6540 65x40mm Red. Hex Nipple HRHN6550 / SRHN6550 65x50mm Red. Hex Nipple HRHN8040 / SRHN8040 80x40mm Red. Hex Nipple HRHN8050 / SRHN8050 80x50mm Red. Hex Nipple HRHN8065 / SRHN8065 80x65mm Red. Hex Nipple HSRS2015 / SRS2015 20x15mm Red. Socket HSRS2515 / SRS2515 25x15mm Red. Socket HSRS2520 / SRS2520 25x20mm Red. Socket HSRS3220 / SRS3220 32x20mm Red. Socket HSRS3225 / SRS3225 32x25mm Red. Socket HSRS4020 / SRS4020 40x20mm Red. Socket HSRS4025 / SRS4025 40x25mm Red. Socket HSRS4032 / SRS4032 40x32mm Red. Socket HSRS5020 / SRS5020 50x20mm Red. Socket HSRS5025 / SRS5025 50x25mm Red. Socket HSRS5032 / SRS5032 50x32mm Red. Socket HSRS5040 / SRS5040 50x40mm Red. Socket HSRS6540 / SRS6540 65x40mm Red. Socket HSRS6550 / SRS6550 65x50mm Red. Socket HSRS8050 / SRS8050 80x50mm Red. Socket HSRS8065 / SRS8065 80x65mm Red. Socket HSRS10065 / SRS10065 100x65mm Red. Socket HSRS10080 / SRS10080 100x80mm Red. Socket HTT15 / ST15 15mm Female Threaded Tee HTT20 / ST20 20mm Female Threaded Tee HTT25 / ST25 25mm Female Threaded Tee HTT32 / ST32 32mm Female Threaded Tee HTT40 / ST40 40mm Female Threaded Tee HTT50 / ST50 50mm Female Threaded Tee HTT65 / ST65 65mm Female Threaded Tee HTT80 / ST80 80mm Female Threaded Tee HTT100 / ST100 100mm Female Threaded Tee HRB10050 / SRB10050 100x50mm Red. Bushes HRB10065 / SRB10065 100x65mm Red. Bushes HRB10080 / SRB10080 100x80mm Red. Bushes HRB1506 / SRB1506 15x6mm Red. Bushes HRB1508 / SRB1508 15x8mm Red. Bushes HRB1510 / SRB1510 15x10mm Red. Bushes HRB2008 / SRB2008 20x8mm Red. Bushes HRB2010 / SRB2010 20x10mm Red. Bushes HRB2015 / SRB2015 20x15mm Red. Bushes HRB2508 / SRB2508 25x8mm Red. Bushes HRB2510 / SRB2510 25x10mm Red. Bushes HRB2515 / SRB2515 25x15mm Red. Bushes HRB2520 / SRB2520 25x20mm Red. Bushes HRB3215 / SRB3215 32x15mm Red. Bushes HRB3220 / SRB3220 32x20mm Red. Bushes HRB3225 / SRB3225 32x25mm Red. Bushes HRB4015 / SRB4015 40x15mm Red Bushes HRB4020 / SRB4020 40x20mm Red. Bushes HRB4025 / SRB4025 40x25mm Red. Bushes HRB4032 / SRB4032 40x32mm Red. Bushes HRB5015 / SRB5015 50x15mm Red. Bushes HRB5020 / SRB5020 50x20mm Red. Bushes HRB5025 / SRB5025 50x25mm Red. Bushes HRB5032 / SRB5032 50x32mm Red. Bushes HRB5040 / SRB5040 50x40mm Red. Bushes HRB6532 / SRB6532 65x32mm Red. Bushes HRB6540 / SRB6540 65x40mm Red. Bushes HRB6550 / SRB6550 65x50mm Red. Bushes HRB8040 / SRB8040 80x40mm Red. Bushes HRB8050 / SRB8050 80x50mm Red. Bushes HRB8065 / SRB8065 80x65mm Red. Bushes HTE100 / SE100 100mm Female Threaded Elbow HTE15 / SE15 15mm Female Threaded Elbow HTE20 / SE20 20mm Female Threaded Elbow HTE25 / SE25 25mm Female Threaded Elbow HTE32 / SE32 32mm Female Threaded Elbow HTE40 / SE40 40mm Female Threaded Elbow HTE50 / SE50 50mm Female Threaded Elbow HTE65 / SE65 65mm Female Threaded Elbow HTE80 / SE80 80mm Female Threaded Elbow HTMFE15 / SMFE15 15mm Male-Female Elbow HTMFE20 / SMFE20 20mm Male-Female Elbow HTMFE25 / SMFE25 25mm Male-Female Elbow HTMFE32 / SMFE32 32mm Male-Female Elbow HTMFE40 / SMFE40 40mm Male-Female Elbow HTMFE50 / SMFE50 50mm Male-Female Elbow HCP100 / SC100 100mm Cap HCP15 / SC15 15mm Cap HCP20 / SC20 20mm Cap HCP25 / SC25 25mm Cap HCP32 / SC32 32mm Cap HCP40 / SC40 40mm Cap HCP50 / SC50 50mm Cap HCP65 / SC65 65mm Cap HCP80 / SC80 80mm Cap HSP06 / SP06 6mm Plug HSP08 / SP08 8mm Plug HSP10 / SP10 10mm Plug HSP100 / SP100 100mm Plug HSP15 / SP15 15mm Plug HSP20 / SP20 20mm Plug HSP25 / SP25 25mm Plug HSP32 / SP32 32mm Plug HSP40 / SP40 40mm Plug HSP50 / SP50 50mm Plug HSP65 / SP65 65mm Plug HSP80 / SP80 80mm Plug SMFA1520 / HMFA1520 15x20mm Male Female Adaptor PODTE50 / HTE50 50mm Tow Eye HBU15 / SBU15 15mm Barrel Union HBU20 / SBU20 20mm Barrel Union HBU25 / SBU25 25mm Barrel Union HBU2520 / SBU2520 25x20mm Barrel Union HBU32 / SBU32 32mm Barrel Union HBU3225 / SBU3225 32x25mm Barrel Union HBU40 / SBU40 40mm Barrel Union HBU50 / SBU50 50mm Barrel Union

Approval Holder:

Hansen Products (NZ) Limited

Company Name

Hansen Products (NZ) Limited

Address

16 Union East Street Whangarei 0110 New Zealand

View All Listings by this Company

Range of in-line flow sensors incorporating either brass (type 230, 235 & 236) or plastic (type 200 & 210) bodies & EPDM ‘O’-rings. Maximum working pressure 12.0 Bar Maximum operating temperature 100.0°C

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

251102718

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

Type 200 range is for use with copper pipe (manufactured to EN 1057)

Size:

Type 200 Range – Clip connection: DN6, DN8 & DN10 = ½” or ¾”, DN15 = ¾” or 1”, DN20 = 1” or 1. ¼” and DN25 = 1.¼” or 1.½” Type 210 Range – BSP (M) DN6, DN8 & DN10 = ½” or ¾”, DN15 = ¾” or 1”, DN20 = 1” or 1. ¼” and DN25 = 1.¼” or 1.½” Type 230 Range – BSP (M) DN10 = ¾”, DN15 = ¾” or 1”, DN20 = 1” or 1. ¼” and DN25 = 1.¼” or 1.½” Type 235 and Type 236 Ranges – BSP (M) DN8 = ½” or ¾”, DN10 = ½” or ¾” or 1”, DN15 = ¾” or 1”, DN20 = 1” or 1. ¼”, DN25 = 1.¼” or 1.½” and DN32 = 1.½”

Marking:

Type 200 - Huba Control, model number and other technical information on adhesive label on body. DN and flow arrow on body. Model number and date of manufacture (YY-MM-DD) on sensor. Type 210 - Huba Control, model number, DN, flow arrow and other technical information on body. Model number and date of manufacture (YY-MM-DD) on sensor. Type 230 - Huba Control, DN and flow arrow on body. Huba Control and other technical information on adhesive label on sensor cap. Type 235 - Huba Control, model number and other technical information on adhesive label on body. DN and flow arrow on body. Model number and date of manufacture (YY-MM-DD) on sensor. Type 236 - Huba control, Model number and other technical information on adhesive label on body. DN and Flow arrow on body. Model number and date of manufacture (YY-MM-DD) on sensor.

Installation Requirements:

R001

Expiry date:

30/11/2030

Model:

Type 200 – DN6, DN8, DN10, DN15, DN20 & DN25. Type 210 – DN6, DN8, DN10, DN15, DN20 & DN25. Type 230 – DN10, DN15, DN20 & DN25. Type 235 – DN8, DN10, DN15, DN20, DN25 & DN32. Type 236 – DN8, DN10, DN15, DN20, DN25 & DN32. Type 201 – Flow Sensor Head, Type 211 – Flow Sensor Head.

Approval Holder:

Huba Control AG

Company Name

Huba Control AG

Address

Industriestrasse 17, CH-5436 Wurenlos, Switzerland

View All Listings by this Company

Range of stainless steel bodied mechanical pump shaft seals. Cold water use only.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

251106001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

For installation into specifically dimensioned pumps.

Size:

Suitable for shaft sizes from 25 mm up to 195 mm.

Marking:

“Chesterton”; “442” on body.

Installation Requirements:

R001

Expiry date:

30/11/2030

Model:

442C – Cartridge split mechanical seal (for shaft sizes from 25 mm up to 120 mm), 442C XL– Cartridge split mechanical seal (for shaft sizes from 125 mm up to 195 mm).

Approval Holder:

Chesterton International GmbH

Company Name

Chesterton International GmbH

Address

Am Lenzenfleck 23, DE-85737 Ismaning

Country

Germany

View All Listings by this Company