Range of resilient seated gate valves with blue epoxy coated ductile iron bodies, and an EPDM wedge, gasket and ‘O’-ring. The model has a non-rising spindle and has a handwheel operating member. Maximum working pressure 25.0 bar. Maximum operating temperature 85°C.
Range of gate valves incorporating blue epoxy coated ductile iron bodies. EPDM coated ductile iron wedges and a non-rising spindle headwork. Some models incorporate a bypass. Maximum working pressure 16.0 bar. Maximum operating temperature 45°C.
"05 420 00 99, 05 433 00 53, 05 441 06 99, 05 444 00 53, 05 445 00 53, 05 446 00 99, 05 447 00 99 & 05 500 00 99 SERVICING VALVES"
Range of commercial dishwashers with flow controlled by a solenoid valve and discharged via a type AB air gap (verified by test - suitable for backflow protection against fluid category 5). Supplied with a Neoperl double check valve and braided connection hose. Maximum working pressure 4.0 Bar Maximum operating temperature 55.0°C
Range of inline magnetic or electrolytic scale inhibitors with copper or bodies, for use with copper pipe (manufactured to BS EN 1057). Maximum working pressure 8.0 bar. Electrolytic models have a maximum operating temperature of 40°C. Magnetic models are cold water use only.
'Dicoat Medium Temp Black'. Factory applied, black coloured bitumen coating. Apply at a Relative Humidity of below 60% as per manufacturer's user instructions reference 'SPL/RD/UI/2019100121', issue no. '01' dated 08.07.2020. Cure for 7 days@30°C. For use with water up to 23°C. This material is only approved for the RH & curing conditions that appear on the approval. If the RH and/or cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'Nav-Coat Bitumen Paint 001 Black'. Factory applied, black coloured bitumen coating. Apply as per manufacturer's product information sheet issued '10.07.2009'. Cure for 7 days@30°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'IF1947T'. Factory applied, red coloured Fusion Bonded Epoxy coating. Apply as per manufacturer's Instructions for Use 'Doc. No. SPPR/L3/WI/PRD/28.' Cure for 45 minutes@220°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'Smart S-IRV'. Site applied, grey coloured, two-part (resin & hardener is automatically mixed in a 10:1 volume ratio through dispensing nozzle) anchor resins. Apply and cure as per ’T Load’ cures set out in Table B3 of European Technical Assessment ‘ETA 14/0141’, dated ‘29/11/2023’. For use with water up to 23°C. If the cure conditions are varied from those specified in ’T Load’ cures set out in set out in Table B3 of European Technical Assessment ‘ETA 14/0104’ then the materials are not covered by the scope of the approval. For use only as a resin anchor having been tested at a reduced surface area to volume ratio of 1,000mm² per 1 litre of water.
'Smart S-IRE'. Site applied, light pink coloured, two-part (resin & hardener is automatically mixed in a 3:1 volume ratio through dispensing nozzle) anchor resins. Apply and cure as per ’T Load’ cures set out in Table B3 of European Technical Assessment ‘ETA 17/0187’, dated ‘29/11/2023’. For use with water up to 65°C. If the cure conditions are varied from those specified in ’T Load’ cures set out in set out in Table B3 of European Technical Assessment ‘ETA 16/0884’ then the materials are not covered by the scope of the approval. For use only as a resin anchor having been tested at a reduced surface area to volume ratio of 1,000mm² per 1 litre of water.
‘Sika AnchorFix®-3030'. Site applied, grey coloured, two-part (resin & hardener is automatically mixed in a 3:1 volume ratio through dispensing nozzle) anchor resins. Apply and cure as per ’T Load’ cures set out in Table B4 of European Technical Assessment ‘ETA 17/0694’, dated ‘09/09/2025’. For use with water up to 65°C. If the cure conditions are varied from those specified in ’T Load’ cures set out in set out in Table B4 of European Technical Assessment ‘ETA 17/0694’ then the materials are not covered by the scope of the approval. For use only as a resin anchor having been tested at a reduced surface area to volume ratio of 1,000mm² per 1 litre of water.
'Weld-On® 795™ Blue PVC Cement'. Blue coloured solvent cement. Apply as per manufacturer's Product Data Sheet '795-05-2025'. Cure for 4 hours@5°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'Weld-On ® 319 PVC Cement'. Clear solvent cement. Apply as per manufacturer's Product Data Sheet '319-05-2025'. Cure for 4 hours@5°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'Weld-On® 779™ ABS Solvent Cement'. Grey coloured solvent cement. Apply as per manufacturer's Product Data Sheet '779-05-2025'. Cure for 4 hours@5°C. For use with water up to 23°C. This material is only approved for the curing conditions that appear on the approval. If the cure conditions are varied from those specified on the approval then the material is not covered by the scope of the approval.
'Bakelite PF 7595' & 'Bakelite PF 6510'. Black coloured, injection moulded PF materials. For use with water up to 70°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| S010* | Various | 1/2" BSP (M) | 10 bar | 65 °C | WINSDRUM | On body | No | Ceramic cartridge | Not Applicable | Aerator | Shower Hose, Handset, Fixed Head, Riser Rail, |
* denotes finish and can be replaced by: C - Chrome RG - Rose Gold BTG - Brushed Titanium gold BZG - Brushed Zirconium gold BRG - Brushed Rose gold MW - Matte white BS - Brushed stainless BN - Brushed nickel PN - Polished nickel GM - Gunmetal B - Matte black TG - Titanium gold ZG - Zirconium gold BC - Black+chrome W - White CW - Chrome+white Q - Quartzite ZGC - Zirconium gold+chrome TGC - Titanium gold+chrome M - Medieval A - Antique bronze CP - Champagne BL - Brushed lead BP - Polished Black
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| F9009K-** | Various | BSP 3/4" (M) | 10 bar | 85 °C | LAN BIAO | Spout | No | 1/4 Turn ceramic disc | Metal Backnuts | Flow Straightener | Interconnecting Hoses, |
** denotes finish: No Suffix = Chrome, H = Black, DYB = Matte white, BZ = Perl white painted, HGTS = Red bronze, HTL = Yellow bronze brushed, Q = Bronze, QTSL = Bronze brushed bright, QTS = Bronze brushed matte, STS = Acid copper brushed, SDMGJ = Water plated rose gold, N = Nickel brushed bright light, NP = Nickel brushed, TJ = Titanium gold, TJLS = Titanium gold brushed, G = Gold, GJS = Gold brushed, GJSY = Zirconium gold wire drawing matte, PGJFY = Zirconium gold wire drawing matte bright light, PLSJ = Brushed gold, LSJY = Brushed gold matte, MGJ = Rose gold, MGJL = Rose gold brushed, DMGJ = Light rose gold brushed, HTS = Red bronze brushed, QHP = Grey, LSQH = Grey brushed, LHMGJ = Brushed yellow rose gold.
Range of combined bath fillers and overflow waste assemblies with plastic bodies (various finishes). The outlet incorporates a plastic aerator. The products are supplied with a cable operated pop-up waste. Maximum operating temperature 60°C.
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| H23B1 | Chrome plated | ½” BSP (F) conical nut x ½” BSP(F) nut | Open outlet use only bar | 65 °C | JETOM, WRAS | Ferrule | No | ||||
| H23GF | Chrome plated | ½” BSP (F) conical nut x ½” BSP(F) conical nut | Open outlet use only bar | 65 °C | JETOM, WRAS | Ferrule | No |
| Product Identification | Surface finish | Inlet Dimension | Max Wrk. Pressure | Max Op. Temp. | Marking | Marking Location | All metals in the water pathway are on the 4msi positive list | Headwork | Fixing Type | Spout Outlet | Includes |
|---|---|---|---|---|---|---|---|---|---|---|---|
| F2300120012060 | Chrome plated | ½” BSP (F) conical nut x ½” BSP(F) nut | Open outlet use only bar | 85 °C | Justlink WRAS 2025 | Nut | No | Open Outlet |
Page 215 of 223
We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.
