Range of stainless steel bodied mechanical pump shaft seals. Cold water use only.

Section:

1530 Miscellaneous Fittings

WRAS Approval Number:

251106001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Note:

For installation into specifically dimensioned pumps.

Size:

Suitable for shaft sizes from 25 mm up to 195 mm.

Marking:

“Chesterton”; “442” on body.

Installation Requirements:

R001

Expiry date:

30/11/2030

Model:

442C – Cartridge split mechanical seal (for shaft sizes from 25 mm up to 120 mm), 442C XL– Cartridge split mechanical seal (for shaft sizes from 125 mm up to 195 mm).

Approval Holder:

Chesterton International GmbH

Company Name

Chesterton International GmbH

Address

Am Lenzenfleck 23, DE-85737 Ismaning

Country

Germany

View All Listings by this Company

Range of stainless steel or cast iron (with electrolytic coating) bodied, multistage centrifugal pumps with stainless steel impellers. Maximum working pressure: Ranges from 16.0 bar to 30.0 bar (see models). Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

251108701

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Hydroo, model and product information on data plate fixed on pump bracket. Flow arrow on body.

Installation Requirements:

R001 R415

Expiry date:

30/11/2030

Model:

VX1 Stainless steel Body – DIN Flange (2 to 40 stages) DN25 (PN25), VX3 Stainless steel Body – DIN Flange (2 to 31 stages) DN25 (PN25), VX5 Stainless steel Body – DIN Flange (2 to 33 stages) DN32 (PN25), VX10 Stainless steel Body – DIN Flange (1 to 22 stages) DN40 (PN25), VX15 Stainless steel Body – DIN Flange (1 to 18 stages) DN50 (PN25), VX20 Stainless steel Body – DIN Flange (1 to 17 stages) DN50 (PN25), VX32 Stainless steel Body – DIN Flange (1 to 16 stages) DN65 (PN30), VX45 Stainless steel Body – DIN Flange (1 to 13 stages) DN80 (PN30), VX65 Stainless steel Body – DIN Flange (1 to 8 stages) DN100 (PN25), VX1 Stainless steel Body – Oval Flange (2 to 26 stages) G1 (F) (PN16), VX3 Stainless steel Body – Oval Flange (2 to 20 stages) G1 (F) (PN16), VX5 Stainless steel Body – Oval Flange (2 to 20 stages) G1 1/4 (F) (PN16), VX10 Stainless steel Body – Oval Flange (2 to 14 stages) G1 1/2 (F) (PN16), VF1 Cast Iron Body – DIN Flange (2 to 40 stages) DN25 (PN25), VF3 Cast Iron Body – DIN Flange (2 to 31 stages) DN25 (PN25), VF5 Cast Iron Body – DIN Flange (2 to 33 stages) DN32 (PN25), VF10 Cast Iron Body – DIN Flange (1 to 22 stages) DN40 (PN25), VF15 Cast Iron Body – DIN Flange (1 to 18 stages) DN50 (PN25), VF20 Cast Iron Body – DIN Flange (1 to 17 stages) DN50 (PN25), VF32 Cast Iron Body – DIN Flange (1 to 16 stages) DN65 (PN30), VF45 Cast Iron Body – DIN Flange (1 to 13 stages) DN80 (PN30), VF65 Cast Iron Body – DIN Flange (1 to 8 stages) DN100 (PN25), VF1 Cast Iron Body – Oval Flange (2 to 26 stages) G1 (F) (PN16), VF3 Cast Iron Body – Oval Flange (2 to 20 stages) G1 (F) (PN16), VF5 Cast Iron Body – Oval Flange (2 to 20 stages) G1 1/4 (F) (PN16), VF10 Cast Iron Body – Oval Flange (2 to 14 stages) G1 1/2 (F) (PN16).

Approval Holder:

HYDROO PUMP INDUSTRIES S.L.

Company Name

HYDROO PUMP INDUSTRIES S.L.

Postcode

17843

Country

Spain

General Email

jordi.armengol@hydroo.com

View All Listings by this Company

Range of shower handsets with brass body available in various finishes. Maximum operating temperature 85°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

251108013

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

Coalbrook (brand logo) on body.

Installation Requirements:

R001 R040

Expiry date:

30/11/2030

Model:

XX 4031 YY. First two letters (e.g. XX) – These are replaced with letters representing the name of the product. Example is, but not limited to: CO - which represents the name Coalbrook. Middle four numbers (e.g. 4031) – This is the numeric code allocated to the model and remains constant. Last letters (e.g. YY) – These are replaced with letters representing the colour/plating options available. The number of letters will depend on the name of the finish. Examples are but not limited to: BN - Brushed Nickel CP - Chrome GM - Gunmetal BB - Brushed Brass

Approval Holder:

Davroc Limited

Company Name

Davroc Limited

Postcode

EN11 0QS

Country

United Kingdom

General Email

rob@lefroybrooks.co.uk

View All Listings by this Company

Range of bib and hose union taps incorporating either brass or DZR brass (142HU prefix models only) bodies and non-rising spindle headworks. The FGK suffix models incorporate a ferrule guard and key (lockshield). The inlet and outlet of the 142HU (508107) and 142HU FGK (501117) models incorporate an approved check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 10.0 bar. Maximum operating temperatures: 142HU (508107) and 142HU FGK (508117) models 65°C, all other models 90°C.

Section:

1750 Taps

Section Subtitle:

Draw off bib tap(s)

WRAS Approval Number:

251102044

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

141 (508017), 141HU (508037), 141HU FGK (508047), 142HU (508107) and 142HU FGK (508117) models: ½” BSP (M). 141HU (508038) and 141HU FGK (508048) models: ¾” BSP (M).

Marking:

Pegler (brand of Aalberts integrated piping systems Ltd.) on spindle or lock shield.

Installation Requirements:

R001 R040

Expiry date:

30/11/2030

Model:

Bib tap: 141 (508017) Hose union bib taps: 141HU (508037), 141HU (508038), 141HU FGK (508047), 141HU FGK (508048), 142HU (508107), 142HU FGK (508117).

Approval Holder:

Aalberts Integrated Piping Systems Ltd.

Company Name

Aalberts Integrated Piping Systems Ltd.

Address

St. Catherines Avenue Doncaster South Yorkshire

Postcode

DN4 8DF

Country

United Kingdom

Phone

+447843075405

General Email

gavin.peters@aalberts-ips.com

View All Listings by this Company

Range of unvented heat pump storage cylinders which consist of an air-source heat pump sitting on top of the tank with either no internal coil (model numbers ending without S) or a factory fitted single internal coil (model numbers ending with S). The secondary circuit is factory fitted with a temperature and pressure relief valve set at 7.0 bar @ 90˚C and an stainless steel immersion heater and titanium alloy anode. The product is not supplied with an inlet control group (safety kit). Maximum operating temperature 70°C. Maximum working pressure (primary & secondary circuit) 5.5 bar.

Section:

1890 Unvented Heating Apparatus

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (F).

Marking:

Clivet on front panel. Clivet and product info on data label.

Installation Requirements:

R001 R140 R360

Expiry date:

30/11/2030

Model:

DSDH-P AQ 1 S 190 (185L), DSDH-P AQ 1 S 300 (275L), DSDH-P AQ 1 S 190S (180L), DSDH-P AQ 1 S 300S (270L).

Approval Holder:

Clivet S.p.A

Company Name

Clivet S.p.A

Address

Via Camp Lonc 25 32032 Z.I. Villapaiera Feltre (BL)

Country

Italy

Phone

+39 0439 3131

General Email

info@clivet.it

View All Listings by this Company