Directory Search Results

Print List

#2202701

‘Endex’ range of copper alloy and copper end feed fittings for use with copper pipe. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 99°C.

Section:
1210 Fittings for use with Tube and Pipe
Section Subtitle:
End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:
2202701
Marking:
Endex (brand of Pegler Yorkshire Ltd.) and size on body
Installation Requirements:
R001
Expiry date:
28/02/2027
Model:
Endex range consisting of: N1 STRAIGHT COUPLING: 6mm to 54mm N1IM ADAPTOR COUPLING: 15mm x ½” to 28mm x 1” N1R REDUCING COUPLING: 8mm x 6mm to 54mm x 42mm N1SLIP STRAIGHT COUPLING SLIP: 15mm to 54mm N2 STRAIGHT FEMALE CONNECTOR: 15mm x 3/8" to 54mm x 2” N3 STRAIGHT MALE CONNECTOR: 15mm x 3/8" to 54mm x 2” N6 REDUCER: 8mm x 6mm to 54mm x 42mm N7 FEMALE ADAPTOR: 15mm x ½” to 54mm x 2” N8 MALE ADAPTOR: 15mm x ½” to 54mm x 2” N9 ADAPTOR: ½” x 15mm to ¾” x 22mm N11 UNION COUPLING CONE FACE: 15mm to 54mm N12 ELBOW: 8mm to 54mm N12R REDUCING ELBOW: 22mm x 15mm N12S STREET ELBOW: 10mm to 54mm N13 MALE ELBOW: 15mm x 1/2” to 28mm x 1” N14 FEMALE ELBOW: 15mm x ½” to 35mm x 1.1/4” N15 BACKPLATE ELBOW: 15mm x ½” to 22mm x ¾” N18 SLOW BEND: 10mm to 54mm N18S SLOW STREET BEND: 10mm to 54mm N21 OBTUSE ELBOW 45°: 12mm to 54mm N21S OBTUSE STREET ELBOW 45°: 15mm to 54mm N22 PARTIAL CROSSOVER: 15mm to 22mm N23 FULL CROSSOVER: 15mm to 22mm N24 EQUAL TEE: 6mm to 54mm N25 TEE REDUCED BRANCH: 15mm x 15mm x 10mm to 54mm x 54mm x 42mm N26 TEE ONE END REDUCED: 18mm x 15mm x 18mm to 54mm x 42mm x 54mm N27 TEE ONE END AND BRANCH REDUCED: 15mm x 12mm x 12mm to 54mm x 42mm x 42mm N28 TEE BOTH ENDS REDUCED: 10mm x 10mm x 12mm to 35mm x 35mm x 42mm N29 FEMALE TEE: 15mm x ½” x 15mm N29R FEMALE TEE: 22mm x ½” x 22mm to 28mm x ½” x 28mm N30 FEMALE TEE: 15mm x 15mm x ½” to 28mm x 28mm x 1” N30R FEMALE TEE: 22mm x 22mm x ½” to 35mm x 35mm x ½” N50 CROSS: 15mm to 22mm N61: 8mm to 54mm N61AV STOP END: 15mm N62 STRAIGHT TAP CONNECTOR: 15mm x ½” to 22mm x ¾” N63 BENT TAP CONNECTOR: 15mm x ½” to 22mm x ¾” N64 BENT UNION ADAPTOR: 15mm x ¾” N65 BENT MALE UNION CONNECTOR: 15mm x ½” to 28mm x 1” N68 STRAIGHT UNION ADAPTOR: 15mm x ¾” to 28mm x 1¼” N68FF FLAT FACED UNION ADAPTOR: 22mm x ¾” N68 METER UNION: 22mm x ¾” N69 STRAIGHT MALE UNION CONNECTOR: 15mm x ½” to 54mm x 2”

Approval Holder:
Aalberts Integrated Piping Systems Ltd.
Company Name
Aalberts Integrated Piping Systems Ltd.
Address
St. Catherines Avenue Doncaster South Yorkshire
Postcode
DN4 8DF
Country
United Kingdom
Phone
+447843075405
General Email
gavin.peters@aalberts-ips.com

View All Listings by this Company

Print This Approval


#2111030

Low profile mechanical seal intended for the internal repair of pipe joints. The system incorporates two stainless steel compression rings and an EPDM seal. For above and below ground use. Maximum working pressure 22.5 bar. Cold water use only.

Section:
1220 Fittings for use with Tube and Pipe
Section Subtitle:
Flanged, un-flanged and repair clamps. (external clamps only) Unless specified in the individual approval, the products within this section are not suitable for below ground use WRAS takes no responsibility for the claims made by the manufacturer regarding the effectiveness of the product for providing a repair to fittings to prevent a waste of water.
WRAS Approval Number:
2111030
Size:
DN600
Marking:
Amex-10 printed on inside of seal and clamp.
Installation Requirements:
R001
Expiry date:
30/11/2026
Model:
AMEX-10 SEAL
Product Images

Approval Holder:
Planned Maintenance (Pennine) Ltd
Company Name
Planned Maintenance (Pennine) Ltd
Address
Bentley Wood Way Burnley
Postcode
BB11 5ST

View All Listings by this Company

Print This Approval


#2202902

Turbo S1-11 Dual Flush syphonic flushing apparatus with Polypropylene body and stainless steel link for use with WC flushing cisterns.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
2202902
Size:
1½” Outlet, Syphon heights 8” to 12”.
Marking:
DUDLEY TURBO 11 2-PART SYPHON on top of valve body.
Installation Requirements:
R001
Expiry date:
31/12/2026
Model:
S1-11 Syphon

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company
Manufacturer:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#2111024

OMEG range of wall mounted, near-boiling water dispensers (cased and insulated). The products incorporate a solenoid valve which controls the flow, a stainless-steel tank, 3 or 5L (see model), and a plastic strainer at the inlet. Maximum supply pressure 10.0 bar. Cold water supply only. Maximum operating temperature 95˚C

Section:
1380 Heaters
Section Subtitle:
Electric, thermal storage, mains fed, closed outlet. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within with system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
2111024
Size:
¾” BSP (M) inlet.
Marking:
HYCO on front of unit. HYCO & OMEG on technical label.
Installation Requirements:
R001 R040
Expiry date:
30/11/2026
Model:
OMEG3 and OMEG5
Product Images

Approval Holder:
Hyco Manufacturing Ltd
Company Name
Hyco Manufacturing Ltd
Address
California Drive, Castleford, West Yorkshire
Postcode
WF10 5QH

View All Listings by this Company

Print This Approval


#2112354

Range of gas fired condensing combination boilers providing domestic hot water via a plate heat exchanger. The cold inlet incorporates an angled spherical valve with a brass body, chromium plated brass ball and a lever operating member. The primary circuit incorporates an expansion vessel, isolation valves on flow and return, drain valve and a pressure relief valve set at 3.0 bar. Maximum working pressure of the primary circuit is 2.5 bar. Maximum working pressure of the secondary circuit is 10.0 bar. Maximum operating temperature for the secondary circuit is 55˚C. Cold supply only.

Section:
1465 Heaters
Section Subtitle:
Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
2112354
Size:
Secondary: 15mm copper tail. Primary: 22mm copper tail.
Marking:
Biasi and Biasi logo on front panel. Biasi, Biasi logo, pressure, model and other technical information on label on inside cover.
Installation Requirements:
R001 R140 R360
Expiry date:
31/12/2026
Model:
Advance Plus 25C ERP, Advance Plus 30C ERP, Advance Plus 35C ERP, M300V.2025 SM, M300V.2530 SM, M300V.3035 SM, M275V.2024 SM, M275V.2428 SM, M275V.2832 SM.
Product Images

Approval Holder:
BSG Caldaie a gas S.p.A.
Company Name
BSG Caldaie a gas S.p.A.
Address
Via Pravolton 1/b Pordenone
Postcode
33170
Country
Italy
Phone
+39 0434 238311
General Email
luca_norio@bsgspa.it

View All Listings by this Company

Print This Approval


#2110331

Range of air cooled ice making machines . Inlet is controlled via solenoid valve. Maximum working pressure 5.5 bar. Cold water use only.

Section:
1500 Ice Making Machines
Size:
See model.
Marking:
Manitowoc logo on door. Manitowoc, model, serial number & technical information on body.
Installation Requirements:
R001 R009 R160 R171 R511
Expiry date:
31/10/2026
Model:
I(*)T0300A I(*)T0300W I(*)P0320A I(*)T0420A I(*)T0450A I(*)T0450W I(*)T0500A I(*)P0500A I(*)T0620A I(*)T0620W I(*)T0750A I(*)T0750W I(*)T0900A I(*)T0900W I(*)T1200A I(*)T1200W I(*)T1200N IBT1020C I(*)T1500A I(*)T1500W I(*)T1500N I(*)T1900A I(*)T1900N I indicates Indigo family of Ice Machines (*) Indicates D, Y or R. Dependent on ice cube size (T or P) Indicates refrigerant type (T=R410A, P=R290) 4 numerical characters indicate to icemaking capacity per 24hrs Final character indicates cooling option (A=Air, W=Water, N=Remote Condenser, C=Remote Condensing Unit)
Models added July 2024: I(*)P0300A I(*)P0420A I(*)P0620A I(*)P0620W I(*)P0600A I(*)P0600W I(*)P0900A I(*)P0900W I(*)P1200A I(*)P1200W I(*)P1200N I(*)P1500A I(*)P1500W I(*)P1500N I(*)P1900A I(*)P1900N
Product Images

Approval Holder:
Pentair Commercial Ice LLC
Company Name
Pentair Commercial Ice LLC
Address
5500 Wayzata Blvd. Suite 900 Golden Valley, MN
Postcode
55416
Country
United States
General Email
jeng.yang@pentair.com

View All Listings by this Company
Manufacturer:
Pentair Commercial Ice LLC
Company Name
Pentair Commercial Ice LLC
Address
5500 Wayzata Blvd. Suite 900 Golden Valley, MN
Postcode
55416
Country
United States
General Email
jeng.yang@pentair.com

View All Listings by this Company

Print This Approval


#2112340

Range of water meters with blue epoxy coated iron bodies and EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:
1505 Water Meters
Size:
see model
Marking:
Company website (Deltaflowtech.com), WRAS approved and other technical information on dial.
Installation Requirements:
R001
Expiry date:
31/12/2026
Model:
D50W – DN50 D65W – DN65 D80W – DN80 D100W – DN100 D125W – DN125 D150W – DN150 D200W – DN200
Product Images

Approval Holder:
Detla Flowtech Ltd.
Company Name
Detla Flowtech Ltd.
Address
Unit 7 Bruff Ind Est Longley Green Suckly
Postcode
WR6 5DR

View All Listings by this Company
Manufacturer:
Detla Flowtech Ltd.
Company Name
Detla Flowtech Ltd.
Address
Unit 7 Bruff Ind Est Longley Green Suckly
Postcode
WR6 5DR

View All Listings by this Company

Print This Approval


#2112343

Range of single-jet water meters with brass bodies and a plastic strainer on the inlet. Maximum working pressure 16.0 bar. Maximum operating temperature 90°C.

Section:
1505 Water Meters
Size:
see model
Marking:
GWF barcode, max pressure, flow rate, model, year of production (YYYY), GWF and other techical info on meter face.
Installation Requirements:
R001 R120
Expiry date:
31/12/2026
Model:
Unico2 and Unico2coder MP: Qn 1.5 (Q3 2.5) G3/4B DN15 110mm: ¾” BSP (M), Qn 1.5 (Q3 2.5) G1B DN20 110mm: 1” BSP (M), Qn 1.5 (Q3 2.5) G1B DN20 130mm: 1” BSP (M), Qn 2.5 (Q3 4.0) G1B DN20 130mm: 1” BSP (M). Models added April 2025: Unico2e: Qn 1.5 (Q3 2.5) G3/4B DN15 110mm: ¾” BSP (M), Qn 1.5 (Q3 2.5) G1B DN20 110mm: 1” BSP (M), Qn 1.5 (Q3 2.5) G1B DN20 130mm: 1” BSP (M), Qn 2.5 (Q3 4.0) G1B DN20 130mm: 1” BSP (M).
Product Images

Approval Holder:
GWF AG
Company Name
GWF AG
Address
Obergrundstrasse 119 Lucerne
Postcode
6005
Country
Switzerland
Phone
+41 41 319 51 77
General Email
moritz.roettger@gwf.ch

View All Listings by this Company
Manufacturer:
GWF AG
Company Name
GWF AG
Address
Obergrundstrasse 119 Lucerne
Postcode
6005
Country
Switzerland
Phone
+41 41 319 51 77
General Email
moritz.roettger@gwf.ch

View All Listings by this Company

Print This Approval


#2112344

MJ (Multi jet) range of water meters with either ductile iron (MJF model) or brass (MJ models) blue epoxy coated bodies and EPDM rubber ‘O’-rings. Maximum working pressure16.0 bar. Maximum operating temperature 85°C.

Section:
1505 Water Meters
Size:
see model
Marking:
Delta Flowtech web address, WRAS approved and other technical info on dial. Flow arrow & size on body.
Installation Requirements:
R001 R120
Expiry date:
31/12/2026
Model:
D15MJ – ¾” BSP (M). D20MJ – 1” BSP (M). D25MJ – 1 ¼” BSP (M). D32MJ – 1 ½” BSP (M). D40MJ – 2” BSP (M). D50MJ – 2 ½” BSP (M). D50MJF – DN50 flange.
Product Images

Approval Holder:
Delta Flowtech
Company Name
Delta Flowtech
Address
Bridge House, Riverside North, Bewdley
Postcode
DY12 1AB
Country
Worcestershire

View All Listings by this Company
Manufacturer:
Delta Flowtech
Company Name
Delta Flowtech
Address
Bridge House, Riverside North, Bewdley
Postcode
DY12 1AB
Country
Worcestershire

View All Listings by this Company

Print This Approval


#2201024

Range of in-line water meters with brass bodies and plastic inlet filters. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C (SJ & ELECTO-SJ models) Maximum operating temperature 30°C (AP VARIO and AP RADIO models)

Section:
1505 Water Meters
Size:
DN15 - ¾” BSP (M) inlet and outlet. DN20 - 1” BSP (M) inlet and outlet.
Marking:
Maddalena logo on meter face or sealing ring. CE, year of manufacture (YYYY) and other technical information on meter face. Flow arrow on body.
Installation Requirements:
R001
Expiry date:
31/01/2027
Model:
SJ, SJ PLUS, SJ EVO, ELECTO SJ models (DN15, length of body 110, 115, 120, 130mm / DN20, length of body 115, 130mm). AP VARIO, AP RADIO models (DN15, length of body 80, 110, 130mm / DN20, length of body 130mm).
Product Images

Approval Holder:
Maddalena SpA
Company Name
Maddalena SpA
Address
via G.B. Maddalena 2/4 Povoletto (Udine)
Postcode
33040
Country
Italy
Phone
+39 0432 634811
General Email
emanuele.ferrari@maddalena.it

View All Listings by this Company
Manufacturer:
Maddalena SpA
Company Name
Maddalena SpA
Address
via G.B. Maddalena 2/4 Povoletto (Udine)
Postcode
33040
Country
Italy
Phone
+39 0432 634811
General Email
emanuele.ferrari@maddalena.it

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 205 of 1016

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.