Range of stainless-steel press fittings (SUS304 or 316L) with EPDM ‘O’-rings for use with stainless-steel pipe (SUS304 or 316L EN 10312), using an ‘M’ press profile. Maximum working pressure 16.0 Bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

241004054

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

SEE MODEL

Marking:

KPress logo, material and size on body.

Installation Requirements:

R001

Expiry date:

31/10/2029

Model:

HB-H15XXX - 45 Degree Equal Elbow - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I15XXX - 45 Degree Equal Elbow - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H16XXX - 45 Degree Plain End Elbow - SUS304 - 28, 35, 42, 54. HB-I16XXX - 45 Degree Plain End Elbow - SUS316L - 28, 35, 42, 54. HB-H07XXX - 90 Degree Equal Elbow - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I07XXX - 90 Degree Equal Elbow - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H08XXX - 90 Degree Female Thread Elbow - SUS304 - 18xRp1/2", 22xRp1/2", 28xRp1", 35xRp1", 35x Rp1 1/4", 42xRp1 1/2", 42xRp1 1/4", 54xRp2", 76.1xRp2 1/2". HB-I08XXX - 90 Degree Female Thread Elbow - SUS316L - 18xRp1/2", 22xRp1/2", 28xRp1", 35xRp1", 35x Rp1 1/4", 42xRp1 1/2", 42xRp1 1/4", 54xRp2", 76.1xRp2 1/2". HB-H09XXX - 90 Degree Male Thread Elbow - SUS304 - 18xR1/2", 35xR1", 35x R1 1/4", 42xR1 1/2", 42xR1 1/4", 54xR2", 76.1xR2 1/2", 88.9xR3", 108xR4". HB-I09XXX - 90 Degree Male Thread Elbow - SUS316L - 18xR1/2", 35xR1", 35x R1 1/4", 42xR1 1/2", 42xR1 1/4", 54xR2", 76.1xR2 1/2", 88.9xR3", 108xR4". HB-H14XXX - 90 Degree Plain End Elbow - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I14XXX - 90 Degree Plain End Elbow - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H18XXX - Cap - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I18XXX - Cap - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H01XXX - Coupling - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I01XXX - Coupling - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H03XXX - Male Thread Adapter - SUS304 - 18xR1/2", 22xR1/2", 28xR1", 35xR1", 35x R1 1/4", 42xR1 1/2", 42xR1 1/4", 54xR2", 76.1xR2 1/2". HB-I03XXX - Male Thread Adapter - SUS316L - 18xR1/2", 22xR1/2", 28xR1", 35xR1", 35x R1 1/4", 42xR1 1/2", 42xR1 1/4", 54xR2", 76.1xR2 1/2". HB-H24XXX - Plain End Coupling - SUS304 - 28x35, 28x42, 35x42, 42x54, 54x76.1, 35x28, DN40x25, DN40x32, DN65x40, DN65x32. HB-I24XXX - Plain end Coupling - SUS316L - 28x35, 28x42, 35x42, 42x54, 54x76.1, 35x28, DN40x25, DN40x32, DN65x40, DN65x32. HB-H02XXX - Reducing Coupling - SUS304 - 22x18, 28x18, 28x22, 35x18, 35x22, 35x28, 42x18, 42x22, 42x28. HB-I02XXX - Reducing Coupling - SUS316L - 22x18, 28x18, 28x22, 35x18, 35x22, 35x28, 42x18, 42x22, 42x28. HB-H13XXX - Reducing Cross - SUS304 - 35x28, 42x28, 54x28, 76.1x28, 88.9x28, 54x35, 76.1x35, 88.9x35, 108x35, DN80x40, DN80x50, DN100x40. HB-I13XXX - Reducing Cross - SUS316L - 35x28, 42x28, 54x28, 76.1x28, 88.9x28, 54x35, 76.1x35, 88.9x35, 108x35, DN80x40, DN80x50, DN100x40. HB-H06XXX - Reducing Tee - SUS304 - 22x18, 28x18, 28x22, 35x18, 35x22, 35x28, 42x18, 42x22, 42x28. HB-I06XXX - Reducing Tee - SUS316L - 22x18, 28x18, 28x22, 35x18, 35x22, 35x28, 42x18, 42x22, 42x28. HB-H19XXX - Slip Coupling - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I19XXX - Slip Coupling - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H11XXX - Tee with male Thread - SUS304 - 18xR1/2", 22xR1/2", 22xR3/4", 28xR1/2", 28xR3/4", 28xR1", 35xR1/2", 35xR3/4", 35xR1". HB-I11XXX - Tee with male Thread - SUS316L - 18xR1/2", 22xR1/2", 22xR3/4", 28xR1/2", 28xR3/4", 28xR1", 35xR1/2", 35xR3/4", 35xR1". HB-H20XXX - Union Adapter - SUS304 - 18xG1/2", 18xG3/4", 22xG1/2", 22xG3/4", 22xG1", 28xG1", 35xG1 1/4", 42xG 1 1/2". HB-I20XXX - Union Adapter - SUS316L - 18xG1/2", 18xG3/4", 22xG1/2", 22xG3/4", 22xG1", 28xG1", 35xG1 1/4", 42xG 1 1/2". HB-H05XXX - Equal Tee - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I05XXX - Equal Tee - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H12XXX - Equal Cross - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I12XXX - Equal Cross - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-H10XXX - Tee with Female Thread - SUS304 - 18xRp1/2", 22xRp1/2", 22xRp3/4", 28xRp1/2", 28x Rp3/4", 28xRp1", 35xRp1/2", 35xRp3/4", 35xRp1". HB-I10XXX - Tee with Female Thread - SUS316L - 18xRp1/2", 22xRp1/2", 22xRp3/4", 28xRp1/2", 28x Rp3/4", 28xRp1", 35xRp1/2", 35xRp3/4", 35xRp1". HB-H00XXX - Stainless Steel Pipe - SUS304 - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108. HB-I00XXX - Stainless Steel Pipe - SUS316L - 18, 22, 28, 35, 42, 54, 76.1, 88.9, 108.

Approval Holder:

Kesanitar GmbH

Company Name

Kesanitar GmbH

Address

Märkische Straße 12, 47809 Krefeld, NRW

Country

Germany

Phone

+49 2151 3624071

General Email

info@kesanitar.com

View All Listings by this Company

‘F17’ range of brass press fittings with EPDM ‘O’-rings for use with PEX/AL/PEX multilayer pipe (manufactured to EN ISO 21003). Jointing is achieved via a crimping tool using either a ‘U’, ‘TH’ or ‘H’ profile. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251115001

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Equal Straight Union: 16mm - 32mm, Unequal Straight Union: 20mmx16mm - 32mmx26mm, Male Straight Union: 16mmx⅜” BSP (M) - 32mmx1” BSP (M), Female Straight Union: 16mmx⅜” BSP (F) - 32mmx1” BSP (F), Equal Elbows: 16mm - 32mm, Unequal Elbows: 20mmx16mm - 32mmx25mm, Male Elbows: 16mmx⅜” BSP (M) - 32mmx1” BSP (M), Female Elbows: 16mmx⅜ BSP (F) - 32mmx1” BSP (F), Equal Tees: 16mm - 32mm, Unequal Tees: 16mmx20mmx16mm - 32mmx26mmx32mm, Female Tee: 16mmx16mmx⅜” BSP (F) - 32mmx32mmx1” BSP (F), Male tee: 16mmx16mmx⅜” BSP (M) - 25mmx25mmx¾” BSP (M), Wall-plated female elbow: 16mmx⅜” BSP (F) - 26mmx¾” BSP (F), Demountable female straight union: 16mmx⅜ BSP (F) - 32mmx1” BSP (F), End cap: 16mm - 32mm.

Marking:

RIFENG, size, crimp profile (U-TH-H) and production date (MM/YYYY) on crimp sleeve.

Installation Requirements:

R001

Expiry date:

30/11/2030

Model:

Equal Straight Union (16mm - 32mm): F17-S1216x1216, F17-S1620x1620, F17-S2025x2025, F17-S2026x2026, F17-S2632x2632. Unequal Straight Union (20mmx16mm - 32mmx26mm): F17-S1620x1216, F17-S2025x1216, F17-S2025x1620, F17-S2026x1216, F17-S2026x1620, F17-S2632x1216, F17-S2632x1620, F17-S2632x2025, F17-S2632x2026. Male Straight Union (16mmx⅜” BSP (M) - 32mmx1” BSP (M)): F17-S1216x3/8, F17-S1216x1/2, F17-S1216x3/4, F17-S1620x1/2, F17-S1620x3/4, F17-S1620x1, F17-S2025x3/4, F17-S2025x1, F17-S2026x3/4, F17-S2026x1, F17-S2632x1. Female Straight Union (16mmx⅜” BSP (F) - 32mmx1” BSP (F)): F17-S1216x3/8F, F17-S1216x1/2F, F17-S1216x3/4F, F17-S1620x1/2F, F17-S1620x3/4F, F17-S1620x1F, F17-S2025x3/4F, F17-S2025x1F, F17-S2026x3/4F, F17-S2026x1F, F17-S2632x1F. Equal Elbows (16mm - 32mm): F17-L1216x1216, F17-L1620x1620, F17-L2025x2025, F17-L2026x2026, F17-L2632x2632. Unequal Elbows (20mmx16mm - 32mmx25mm): F17-L1620*1216, F17-L2025*1216, F17-L2025*1620, F17-L2632*2025. Male Elbows (16mmx⅜” BSP (M) - 32mmx1” BSP (M)): F17-L1216x3/8, F17-L1216x1/2, F17-L1216x3/4, F17-L1620x1/2, F17-L1620x3/4, F17-L1620x1, F17-L2025x3/4, F17-L2025x1, F17-L2026x3/4, F17-L2026x1, F17-L2632x1. Female Elbows (16mmx⅜ BSP (F) - 32mmx1” BSP (F)): F17-L1216x3/8F, F17-L1216x1/2F, F17-L1216x3/4F, F17-L1620x1/2F, F17-L1620x3/4F, F17-L2025x3/4F, F17-L2026x3/4F, F17-L2025x1F, F17-L2632x1F. Equal Tees (16mm - 32mm): F17-T1216x1216x1216, F17-T1620x1620x1620, F17-T2025x2025x2025, F17-T2026x2026x2026, F17-T2632x2632x2632. Unequal Tees (16mmx20mmx16mm - 32mmx26mmx32mm): F17-T1216x1620x1216, F17-T1216x2025x1216, F17-T1620x1216x1216, F17-T2025x1216x1216, F17-T2026x1216x1216, F17-T2026x1216x1620, F17-T1620x1216x1620, F17-T1620x1620x1216, F17-T1620x2025x1620, F17-T1620x2026x1620, F17-T2025x1216x2025, F17-T2025x1620x1620, F17-T2025x2025x1620, F17-T2025x1620x2025, F17-T2026x1216x2026, F17-T2026x1620x1620, F17-T2026x1620x2026, F17-T2026x2026x1620, F17-T2632x1216x2632, F17-T2632x1620x2632, F17-T2632x2026x2026, F17-T2632x2025x2632, F17-T2632x2026x2632. Female Tee (16mmx16mmx⅜” BSP (F) - 32mmx32mmx1” BSP (F)): F17-T1216x3/8Fx1216, F17-T1216x1/2Fx1216, F17-T1620x1/2Fx1620, F17-T1620x3/4Fx1620, F17-T2025x1/2Fx2025, F17-T2025x3/4Fx2025, F17-T2026x1/2Fx2026, F17-T2026x3/4Fx2026, F17-T2632x3/4Fx2632, F17-T2632x1Fx2632. Male tee (16mmx16mmx⅜” BSP (M) - 25mmx25mmx¾” BSP (M)): F17-T1216x3/8x1216, F17-T1216x1/2x1216, F17-T1620x1/2x1620, F17-T1620x3/4x1620, F17-T2025x1/2x2025, F17-T2025x3/4x2025. Wall-plated female elbow (16mmx⅜” BSP (F) - 26mmx¾” BSP (F)): F17-L1216x3/8F (Z), F17-L1216x1/2F (Z), F17-L1620x1/2F (Z), F17-L1620x3/4F (Z), F17-L2025x3/4F (Z), F17-L2026x3/4F (Z). Demountable female straight union (16mmx⅜ BSP (F) - 32mmx1” BSP (F)): F17-S1216x3/8F (H), F17-S1216x1/2F (H), F17-S1216x3/4F (H), F17-S1620x1/2F (H), F17-S1620x3/4F (H), F17-S2025x3/4F (H), F17-S2026x3/4F (H), F17-S2632x1F (H). End cap (16mm - 32mm): F17-D1216, F17-D1620, F17-D2025, F17-D2026, F17-D2632.

Approval Holder:

Rifeng Enterprise (Foshan) Co., Ltd.

Company Name

Rifeng Enterprise (Foshan) Co., Ltd.

Address

F1-F14 Building No. 1 Rifeng Road Leping Town Sanshui District Foshan City Guangdong Province

Postcode

528318

Country

China

Phone

+86 757 8203 1672

General Email

lio-lu@rifeng.com

View All Listings by this Company

Manufacturer:

Rifeng Enterprise (Foshan) Co., Ltd.

Company Name

Rifeng Enterprise (Foshan) Co., Ltd.

Address

F1-F14 Building No. 1 Rifeng Road Leping Town Sanshui District Foshan City Guangdong Province

Postcode

528318

Country

China

Phone

+86 757 8203 1672

General Email

lio-lu@rifeng.com

View All Listings by this Company

Range of ‘M’ profile copper press fittings with EPDM ‘O’-rings for use with copper pipes (manufactured to EN 1057). Jointing is achieved via a crimping tool using a ‘M’ profile. For above and below ground use. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251015011

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Linhai Hengye Tubing Equipment Co., Ltd logo (‘IoJ’) and size on body.

Installation Requirements:

R001

Expiry date:

31/10/2030

Model:

P5270 series - Coupling: P527012: 12mm, P527015: 15mm, P527018: 18mm, P527022: 22mm, P527028: 28mm, P527035: 35mm, P527042: 42mm, P527054: 54mm. P5270S series - Slip coupling: P5270S12: 12mm, P5270S15: 15mm, P5270S18: 18mm, P5270S22: 22mm, P5270S28: 28mm, P5270S35: 35mm, P5270S42: 42mm, P5270S54: 54mm. P5240 series - Reducing coupling: P52402215: 22x15mm, P52402815: 28x15mm, P52402822: 28x22mm, P52403515: 35x15mm, P52403522: 35x22mm, P52403528: 35x28mm, P52404222: 42x22mm, P52404228: 42x28mm, P52404235: 42x35mm, P52405428: 54x28mm, P52405435: 54x35mm, P52405442: 54x42mm. P5243 series - Fitting Reducer: P52431512: 15x12mm, P52431812: 18x12mm, P52431815: 18x15mm, P52432215: 22x15mm, P52432218: 22x18mm, P52432815: 28x15mm, P52432818: 28x18mm, P52432822: 28x22mm, P52433515: 35x15mm, P52433518: 35x18mm, P52433522: 35x22mm, P52433528: 35x28mm, P52434215: 42x15mm, P52434218: 42x18mm, P52434222: 42x22mm, P52434228: 42x28mm, P52434235: 42x35mm, P52435415: 54x15mm, P52435418: 54x18mm, P52435422: 54x22mm, P52435428: 54x28mm, P52435435: 54x35mm, P52435442: 54x42mm. P5090 series - Reducing elbow 90°: P50902215: 22x15mm, P50902815: 28x15mm, P50902822: 28x22mm. P5085 series - Full Crossover: P508515: 15mm, P508522: 22mm. P5086 series - Part Crossover: P508615: 15mm, P508622: 22mm. P5090 series - Elbow 90°: P509012: 12mm, P509015: 15mm, P509018: 18mm, P509022: 22mm, P509028: 28mm, P509035: 35mm, P509042: 42mm, P509054: 54mm. P5092 series - Street elbow 90°: P509212: 12mm, P509215: 15mm, P509218: 18mm, P509222: 22mm, P509228: 28mm, P509235: 35mm, P509242: 42mm, P509254: 54mm. P5041 series - Elbow 45°: P504112: 12mm, P504115: 15mm, P504118: 18mm, P504122: 22mm, P504128: 28mm, P504135: 35mm, P504142: 42mm, P504154: 54mm. P5040 series - Street elbow 45°: P504012: 12mm, P504015: 15mm, P504018: 18mm, P504022: 22mm, P504028: 28mm, P504035: 35mm, P504042: 42mm, P504054: 54mm. P5130 series - Equal tee: P513012: 12mm, P513015: 15mm, P513018: 18mm, P513022: 22mm, P513028: 28mm, P513035: 35mm, P513042: 42mm, P513054: 54mm. P5130 series - Reducing tee: P5130151212: 15x12x12mm, P5130151215: 15x12x15mm, P5130151815: 15x18x15mm, P5130152215: 15x22x15mm, P5130181218: 18x12x18mm, P5130181515: 18x15x15mm, P5130181518: 18x15x18mm, P5130181815: 18x18x15mm, P5130221222: 22x12x22mm, P5130221522: 22x15x22mm, P5130221822: 22x18x22mm, P5130221515: 22x15x15mm, P5130222215: 22x22x15mm, P5130281528: 28x15x28mm, P5130281828: 28x18x28mm, P5130282228: 28x22x28mm, P5130351535: 35x15x35mm, P5130351835: 35x18x35mm, P5130352235: 35x22x35mm, P5130352835: 35x28x35mm, P5130351515: 35x15x15mm, P5130351518: 35x15x18mm, P5130351522: 35x15x22mm, P5130351528: 35x15x28mm, P5130351815: 35x18x15mm, P5130351818: 35x18x18mm, P5130351822: 35x18x22mm, P5130351828: 35x18x28mm, P5130352215: 35x22x15mm, P5130352218: 35x22x18mm, P5130352222: 35x22x22mm, P5130352228: 35x22x28mm, P5130352815: 35x28x15mm, P5130352818: 35x28x18mm, P5130352822: 35x28x22mm, P5130352828: 35x28x28mm, P5130353515: 35x35x15mm, P5130353518: 35x35x18mm, P5130353522: 35x35x22mm, P5130353528: 35x35x28mm, P5130421542: 42x15x42mm, P5130421842: 42x18x42mm, P5130422242: 42x22x42mm, P5130422842: 42x28x42mm, P5130423542: 42x35x42mm, P5130421515: 42x15x15mm, P5130421518: 42x15x18mm, P5130421522: 42x15x22mm, P5130421528: 42x15x28mm, P5130421535: 42x15x35mm, P5130421815: 42x18x15mm, P5130421818: 42x18x18mm, P5130421822: 42x18x22mm, P5130421828: 42x18x28mm, P5130421835: 42x18x35mm, P5130422215: 42x22x15mm, P5130422218: 42x22x18mm, P5130422222: 42x22x22mm, P5130422228: 42x22x28mm, P5130422235: 42x22x35mm, P5130422815: 42x28x15mm, P5130422818: 42x28x18mm, P5130422822: 42x28x22mm, P5130422828: 42x28x28mm, P5130422835: 42x28x35mm, P5130423515: 42x35x15mm, P5130423518: 42x35x18mm, P5130423522: 42x35x22mm, P5130423528: 42x35x28mm, P5130423535: 42x35x35mm, P5130424215: 42x42x15mm, P5130424218: 42x42x18mm, P5130424222: 42x42x22mm, P5130424228: 42x42x28mm, P5130424235: 42x42x35mm, P5130541554: 54x15x54mm, P5130541854: 54x18x54mm, P5130542254: 54x22x54mm, P5130542854: 54x28x54mm, P5130543554: 54x35x54mm, P5130544254: 54x42x54mm, P5130541515: 54x15x15mm, P5130541518: 54x15x18mm, P5130541522: 54x15x22mm, P5130541528: 54x15x28mm, P5130541535: 54x15x35mm, P5130541542: 54x15x42mm, P5130541815: 54x18x15mm, P5130541818: 54x18x18mm, P5130541822: 54x18x22mm, P5130541828: 54x18x28mm, P5130541835: 54x18x35mm, P5130541842: 54x18x42mm, P5130542215: 54x22x15mm, P5130542218: 54x22x18mm, P5130542222: 54x22x22mm, P5130542228: 54x22x28mm, P5130542235: 54x22x35mm, P5130542242: 54x22x42mm, P5130542815: 54x28x15mm, P5130542818: 54x28x18mm, P5130542822: 54x28x22mm, P5130542828: 54x28x28mm, P5130542835: 54x28x35mm, P5130542842: 54x28x42mm, P5130543515: 54x35x15mm, P5130543518: 54x35x18mm, P5130543522: 54x35x22mm, P5130543528: 54x35x28mm, P5130543535: 54x35x35mm, P5130543542: 54x35x42mm, P5130544215: 54x42x15mm, P5130544218: 54x42x18mm, P5130544222: 54x42x22mm, P5130544228: 54x42x28mm, P5130544235: 54x42x35mm, P5130544242: 54x42x42mm, P5130545415: 54x54x15mm, P5130545418: 54x54x18mm, P5130545422: 54x54x22mm, P5130545428: 54x54x28mm, P5130545435: 54x54x35mm, P5130545442: 54x54x42mm. P5301 series - End cap: P530112: 12mm, P530115: 15mm, P530118: 18mm, P530122: 22mm, P530128: 28mm, P530135: 35mm, P530142: 42mm, P530154: 54mm.

Approval Holder:

Linhai Hengye Tubing Equipment Co., Ltd

Company Name

Linhai Hengye Tubing Equipment Co., Ltd

Address

Machinery Industrial Park, Duqiao Town, Linhai City

Country

China

Phone

0086‐576‐85528079

General Email

sales@zjhengye.com

View All Listings by this Company

Manufacturer:

Linhai Hengye Tubing Equipment Co., Ltd

Company Name

Linhai Hengye Tubing Equipment Co., Ltd

Address

Machinery Industrial Park, Duqiao Town, Linhai City

Country

China

Phone

0086‐576‐85528079

General Email

sales@zjhengye.com

View All Listings by this Company

Range of brass press fittings with EPDM ‘O’-rings for use with PEX/AL/PEX multilayer pipe (manufactured to EN ISO 21003). Jointing is achieved via a crimping tool using either a ‘U’, ‘TH’ or ‘H’ profile. Maximum working pressure 10.0 bar. Cold water use only.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251115002

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Equal Straight Union: 16mm - 32mm, Unequal Straight Union: 20mmx16mm - 32mmx26mm, Male Straight Union: 16mmx⅜” BSP (M) - 32mmx1” BSP (M), Female Straight Union: 16mmx⅜” BSP (F) - 32mmx1” BSP (F), Equal Elbows: 16mm - 32mm, Male Elbows: 16mmx⅜” BSP (M) - 32mmx1” BSP (M), Female Elbows: 16mmx⅜ BSP (F) - 32mmx1” BSP (F), Equal Tees: 16mm - 32mm, Unequal Tees: 16mmx20mmx16mm - 32mmx26mmx32mm, Female Tee: 16mmx16mmx⅜” BSP (F) - 32mmx32mmx1” BSP (F), Wall-plated female elbow: 16mmx⅜” BSP (F) - 26mmx¾” BSP (F),

Marking:

Brymec & arrow logo, size, crimp profile (U-TH-H) and production date (MM/YYYY) on crimp sleeve.

Installation Requirements:

R001

Expiry date:

30/11/2030

Model:

Equal Straight Union (16mm - 32mm): 51019 ∙ 16mm Brass Coupler Multilayer Crimp Fitting 51020 ∙ 20mm Brass Coupler Multilayer Crimp Fitting 51018 ∙ 25mm Brass Coupler Multilayer Crimp Fitting 51022 ∙ 32mm Brass Coupler Multilayer Crimp Fitting Unequal Straight Union (20mmx16mm - 32mmx26mm): 51028 ∙ 20x16mm Reducing Coupler Multilayer Crimp Fitting 51040 ∙ 25x16mm Reducing Coupler Multilayer Crimp Fitting 51038 ∙ 25x20mm Reducing Coupler Multilayer Crimp Fitting 51031 ∙ 32x16mm Reducing Coupler Multilayer Crimp Fitting 51032 ∙ 32x20mm Reducing Coupler Multilayer Crimp Fitting 51039 ∙ 32x25mm Reducing Coupler Multilayer Crimp Fitting Male Straight Union (16mmx⅜” BSP (M) - 32mmx1” BSP (M)): 51081 ∙ 16mm x 1/2" Male Iron Multilayer Crimp Coupler 51083 ∙ 20mm x 1/2" Male Iron Multilayer Crimp Coupler 51084 ∙ 20mm x 3/4" Male Iron Multilayer Crimp Coupler 51082 ∙ 25mm x 3/4" Male Iron Multilayer Crimp Fitting 51085 ∙ 25mm x 1" Male Iron Multilayer Crimp Fitting 51088 ∙ 32mm x 1" Male Iron Multilayer Crimp Coupler Female Straight Union (16mmx⅜” BSP (F) - 32mmx1” BSP (F)): 51067 ∙ 16mm x 1/2" Female Iron Multilayer Crimp Coupler 51069 ∙ 20mm x 1/2" Female Iron Multilayer Crimp Coupler 51070 ∙ 20mm x 3/4" Female Iron Multilayer Crimp Coupler 51095 ∙ 25mm x 3/4" Female Iron Multilayer Crimp Fitting 51068 ∙ 25mm x 1" Female Iron Multilayer Crimp Fitting 51073 ∙ 32mm x 1" Female Iron Multilayer Crimp Coupler Equal Elbows (16mm - 32mm): 51044 ∙ 16mm Brass 90 Elbow Multilayer Crimp Fitting 51045 ∙ 20mm Brass 90 Elbow Multilayer Crimp Fitting 51043 ∙ 25mm Brass 90 Elbow Multilayer Crimp Fitting 51047 ∙ 32mm Brass 90 Elbow Multilayer Crimp Fitting Male Elbows (16mmx⅜” BSP (M) - 32mmx1” BSP (M)): 51096 ∙ 16mm x 1/2" Male Iron Elbow Multilayer Crimp Fitting 51098 ∙ 20mm x 3/4" Male Iron Elbow Multilayer Crimp Fitting 51099 ∙ 25mm x 1" Male Iron Elbow Multilayer Crimp Fitting Female Elbows (16mmx⅜ BSP (F) - 32mmx1” BSP (F)): 51096 ∙ 16mm x 1/2" Female Iron Elbow Multilayer Crimp Fitting 51108 ∙ 16mm x 1/2" Female Iron Elbow Multilayer Crimp Fitting 51109 ∙ 20mm x 3/4" Female Iron Elbow Multilayer Crimp Fitting 51105 ∙ 25mm x 3/4" Female Iron Elbow Multilayer Crimp Fitting 51106 ∙ 25mm x 1" Female Iron Elbow Multilayer Crimp Fitting Equal Tees (16mm - 32mm): 51058 ∙ 16mm Brass Equal Tee Multilayer Crimp Fitting 51059 ∙ 20mm Brass Equal Tee Multilayer Crimp Fitting 51042 ∙ 25mm Brass Equal Tee Multilayer Crimp Fitting 51061 ∙ 32mm Brass Equal Tee Multilayer Crimp Fitting Unequal Tees (16mmx20mmx16mm - 32mmx26mmx32mm): 51140 ∙ 16x16x20mm Reducing Ends Tee Multilayer Crimp 51142 ∙ 20x16x16mm Reducing End & Branch Tee Multilayer Crimp 51121 ∙ 20x20x16mm Reducing Branch Tee Multilayer Crimp 51137 ∙ 20x20x25mm Reducing Ends Tee Multilayer Crimp 51124 ∙ 25x25x16mm Reducing Branch Tee Multilayer Crimp 51147 ∙ 25x20x20mm Reducing End & Branch Tee Multilayer Crimp 51125 ∙ 25x25x20mm Reducing Branch TEE Multilayer Crimp 51129 ∙ 32x32x20mm Reducing Branch Tee Multilayer Crimp 51130 ∙ 32x32x25mm Reducing Branch Tee Multilayer Crimp Female Tee (16mmx16mmx⅜” BSP (F) - 32mmx32mmx1” BSP (F)): 51155 ∙ 16mm x 1/2" Female Iron Branch Tee Multilayer Crimp 51156 ∙ 20mm x 1/2" Female Iron Branch Tee Multilayer Crimp 51157 ∙ 25mm x 3/4" Female Iron Branch Tee Multilayer Crimp Wall-plated female elbow (16mmx⅜” BSP (F) - 26mmx¾” BSP (F)): 51171 ∙ 16mm x 1/2" Backplate Elbow Multilayer Crimp 51173 ∙ 20mm x 3/4" Backplate Elbow Multilayer Crimp. _________

Approval Holder:

Brymec Ltd

Company Name

Brymec Ltd

Address

Redlands , Coulsdon, Surrey

Postcode

CR5 2HT

Country

United Kingdom

General Email

Jeremy.douglas@brymec.com

View All Listings by this Company

Range of end feed copper fittings for use with copper pipes (manufactured to EN 1057). The 5043G series and 5002G series models incorporate an EPDM ‘O’-ring on the captive nut connection. For above and below ground use. Maximum working pressure 20.0 bar. Maximum operating temperature 85°C.

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

251015004

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Linhai Hengye Tubing Equipment Co., Ltd logo (‘IoJ’) and size on body.

Installation Requirements:

R001

Expiry date:

31/10/2030

Model:

5270 series - Coupling: 52706: 6mm, 52708: 8mm, 527010: 10mm, 527012: 12mm, 527014: 14mm, 527015: 15mm, 527016: 16mm, 527018: 18mm, 527022: 22mm, 527028: 28mm, 527035: 35mm, 527040: 40mm, 527042: 42mm, 527054: 54mm, 527064: 64mm, 527067: 67mm, 527070: 70mm, 527076: 76mm, 527089: 89mm, 5270108: 108mm. 5270S series - Slip coupling: 5270S12: 12mm, 5270S15: 15mm, 5270S18: 18mm, 5270S22: 22mm, 5270S28: 28mm, 5270S35: 35mm, 5270S42: 42mm, 5270S54: 54mm, 5270S67: 67mm, 5270S76: 76mm, 5270S108: 108mm. 5240MI series - Coupling for BS and Irish: 5240MI1512: 15mmx1/2", 5240MI2234: 22mmx3/4", 5240MI281: 28mmx1", 5240MI35114: 35mmx1-1/4". 5240 series - Reducing coupling: 524086: 8x6mm, 5240106: 10x6mm, 5240108: 10x8mm, 5240126: 12x6mm, 5240128: 12x8mm, 52401210: 12x10mm, 52401410: 14x10mm, 52401412: 14x12mm, 5240158: 15x8mm, 52401510: 15x10mm, 52401512: 15x12mm, 52401514: 15x14mm, 52401610: 16x10mm, 52401612: 16x12mm, 52401614: 16x14mm, 52401615: 16x15mm, 52401810: 18x10mm, 52401812: 18x12mm, 52401814: 18x14mm, 52401815: 18x15mm, 52401816: 18x16mm, 52402210: 22x10mm, 52402212: 22x12mm, 52402214: 22x14mm, 52402215: 22x15mm, 52402216: 22x16mm, 52402218: 22x18mm, 52402812: 28x12mm, 52402814: 28x14mm, 52402815: 28x15mm, 52402816: 28x16mm, 52402818: 28x18mm, 52402822: 28x22mm, 52403515: 35x15mm, 52403518: 35x18mm, 52403522: 35x22mm, 52403528: 35x28mm, 52404028: 40x28mm, 52404215: 42x15mm, 52404222: 42x22mm, 52404228: 42x28mm, 52404235: 42x35mm, 52405415: 54x15mm, 52405422: 54x22mm, 52405428: 54x28mm, 52405435: 54x35mm, 52405442: 54x42mm, 52406435: 64x35mm, 52406442: 64x42mm, 52406454: 64x54mm, 52406735: 67x35mm, 52406742: 67x42mm, 52406754: 67x54mm, 52407054: 70x54mm, 52407635: 76x35mm, 52407642: 76x42mm, 52407654: 76x54mm, 52407664: 76x64mm, 52407667: 76x67mm, 52408054: 80x54mm, 52408976: 89x76mm, 524010842: 108x42mm, 524010854: 108x54mm, 524010867: 108x67mm, 524010876: 108x76mm, 524010889: 108x89mm. 5243 series - Fitting reducer: 524386: 8x6mm, 5243106: 10x6mm, 5243108: 10x8mm, 5243126: 12x6mm, 5243128: 12x8mm, 52431210: 12x10mm, 52431410: 14x10mm, 52431412: 14x12mm, 5243158: 15x8mm, 52431510: 15x10mm, 52431512: 15x12mm, 52431514: 15x14mm, 52431610: 16x10mm, 52431612: 16x12mm, 52431614: 16x14mm, 52431615: 16x15mm, 52431810: 18x10mm, 52431812: 18x12mm, 52431814: 18x14mm, 52431815: 18x15mm, 52431816: 18x16mm, 52432210: 22x10mm, 52432212: 22x12mm, 52432214: 22x14mm, 52432215: 22x15mm, 52432216: 22x16mm, 52432218: 22x18mm, 52432810: 28x10mm, 52432812: 28x12mm, 52432814: 28x14mm, 52432815: 28x15mm, 52432816: 28x16mm, 52432818: 28x18mm, 52432822: 28x22mm, 52433515: 35x15mm, 52433518: 35x18mm, 52433522: 35x22mm, 52433528: 35x28mm, 52434028: 40x28mm, 52434215: 42x15mm, 52434218: 42x18mm, 52434222: 42x22mm, 52434228: 42x28mm, 52434235: 42x35mm, 52435415: 54x15mm, 52435422: 54x22mm, 52435428: 54x28mm, 52435435: 54x35mm, 52435442: 54x42mm, 52436435: 64x35mm, 52436442: 64x42mm, 52436454: 64x54mm, 52436722: 67x22mm, 52436728: 67x28mm, 52436735: 67x35mm, 52436742: 67x42mm, 52436754: 67x54mm, 52437042: 70x42mm, 52437635: 76x35mm, 52437642: 76x42mm, 52437654: 76x54mm, 52437664: 76x64mm, 52437667: 76x67mm, 52438054: 80x54mm, 52438064: 80x64mm, 52438954: 89x54mm, 52438964: 89x64mm, 52438976: 89x76mm, 524310835: 108x35mm, 524310842: 108x42mm, 524310854: 108x54mm, 524310867: 108x67mm, 524310876: 108x76mm, 524310889: 108x89mm. 5090 series - Elbow: 50906: 6mm, 50908: 8mm, 509010: 10mm, 509012: 12mm, 509014: 14mm, 509015: 15mm, 509016: 16mm, 509018: 18mm, 509022: 22mm, 509025: 25mm, 509028: 28mm, 509035: 35mm, 509040: 40mm, 509042: 42mm, 509054: 54mm, 509064: 64mm, 509067: 67mm, 509076: 76mm, 509089: 89mm, 5090108: 108mm. 5092 series - Street elbow 90°: 50926: 6mm, 50928: 8mm, 509210: 10mm, 509212: 12mm, 509214: 14mm, 509215: 15mm, 509216: 16mm, 509218: 18mm, 509222: 22mm, 509228: 28mm, 509235: 35mm, 509240: 40mm, 509242: 42mm, 509254: 54mm, 509264: 64mm, 509267: 67mm. 5090 series - Reducing elbow 90°: 50901512: 15x12mm, 50902215: 22x15mm, 50902822: 28x22mm, 50903528: 35x28mm. 5041 series - Elbow 45°: 50416: 6mm, 50418: 8mm, 504110: 10mm, 504112: 12mm, 504114: 14mm, 504115: 15mm, 504116: 16mm, 504118: 18mm, 504122: 22mm, 504128: 28mm, 504135: 35mm, 504140: 40mm, 504142: 42mm, 504154: 54mm, 504164: 64mm, 504167: 67mm, 504170: 70mm, 504176: 76mm, 504180: 80mm, 504189: 89mm, 5041108: 108mm. 5040 series - Street elbow 45°: 50406: 6mm, 50408: 8mm, 504010: 10mm, 504012: 12mm, 504014: 14mm, 504015: 15mm, 504016: 16mm, 504018: 18mm, 504022: 22mm, 504028: 28mm, 504035: 35mm, 504040: 40mm, 504042: 42mm, 504054: 54mm, 504064: 64mm, 504067: 67mm, 504076: 76mm, 504089: 89mm, 5040108: 108mm. 5002A series - Bend 90°: 5002A6: 6mm, 5002A8: 8mm, 5002A10: 10mm, 5002A12: 12mm, 5002A14: 14mm, 5002A15: 15mm, 5002A16: 16mm, 5002A18: 18mm, 5002A22: 22mm, 5002A28: 28mm, 5002A35: 35mm, 5002A40: 40mm, 5002A42: 42mm, 5002A54: 54mm, 5002A64: 64mm, 5002A67: 67mm, 5002A70: 70mm, 5002A76: 76mm, 5002A80: 80mm, 5002A89: 89mm, 5002A108: 108mm. 5001A series - Street bend 90°: 5001A6: 6mm, 5001A8: 8mm, 5001A10: 10mm, 5001A12: 12mm, 5001A14: 14mm, 5001A15: 15mm, 5001A16: 16mm, 5001A18: 18mm, 5001A22: 22mm, 5001A28: 28mm, 5001A35: 35mm, 5001A40: 40mm, 5001A42: 42mm, 5001A54: 54mm, 5001A64: 64mm, 5001A67: 67mm, 5001A76: 76mm, 5001A80: 80mm, 5001A89: 89mm, 5001A108: 108mm, 5085 series - Full crossover: 508512: 12mm, 508514: 14mm, 508515: 15mm, 508516: 16mm, 508518: 18mm, 508522: 22mm, 508528: 28mm. 5086 series - Part crossover: 508612: 12mm, 508614: 14mm, 508615: 15mm, 508616: 16mm, 508618: 18mm, 508622: 22mm, 508628: 28mm. 5130 series - Equal tee: 51306: 6mm, 51308: 8mm, 513010: 10mm, 513012: 12mm, 513014: 14mm, 513015: 15mm, 513016: 16mm, 513018: 18mm, 513022: 22mm, 513028: 28mm, 513035: 35mm, 513040: 40mm, 513042: 42mm, 513054: 54mm, 513064: 64mm, 513067: 67mm, 513070: 70mm, 513076: 76mm, 513080: 80mm, 513089: 89mm, 5130108: 108mm. 5130 series - Reducing tee: 5130686: 6x8x6mm, 51306106: 6x10x6mm, 5130866: 8x6x6mm, 5130868: 8x6x8mm, 51308108: 8x10x8mm, 51301088: 10x8x8mm, 513010610: 10x6x10mm, 513010810: 10x8x10mm, 5130101210: 10x12x10mm, 5130101510: 10x15x10mm, 513010108: 10x10x8mm, 513012612: 12x6x12mm, 513012812: 12x8x12mm, 513012810: 12x8x10mm, 5130121010: 12x10x10mm, 5130121210: 12x12x10mm, 5130121012: 12x10x12mm, 5130121412: 12x14x12mm, 5130121512: 12x15x12mm, 5130121612: 12x16x12mm, 5130121812: 12x18x12mm, 5130141212: 14x12x12mm, 5130141412: 14x14x12mm, 5130141812: 14x18x12mm, 5130141014: 14x10x14mm, 5130141214: 14x12x14mm, 5130141614: 14x16x14mm, 5130141814: 14x18x14mm, 5130142214: 14x22x14mm, 5130151010: 15x10x10mm, 5130151012: 15x10x12mm, 5130151510: 15x15x10mm, 5130151212: 15x12x12mm, 5130151512: 15x15x12mm, 5130151812: 15x18x12mm, 513015615: 15x6x15mm, 513015815: 15x8x15mm, 5130151015: 15x10x15mm, 5130151215: 15x12x15mm, 5130151815: 15x18x15mm, 5130152215: 15x22x15mm, 5130161610: 16x16x10mm, 5130161212: 16x12x12mm, 5130161412: 16x14x12mm, 5130161612: 16x16x12mm, 5130161214: 16x12x14mm, 5130161414: 16x14x14mm, 5130161614: 16x16x14mm, 5130161814: 16x18x14mm, 513016616: 16x6x16mm, 513016816: 16x8x16mm, 5130161016: 16x10x16mm, 5130161216: 16x12x16mm, 5130161416: 16x14x16mm, 5130161816: 16x18x16mm, 5130162216: 16x22x16mm, 5130181212: 18x12x12mm, 5130181512: 18x15x12mm, 5130181812: 18x18x12mm, 5130181414: 18x14x14mm, 5130181614: 18x16x14mm, 5130181814: 18x18x14mm, 5130181215: 18x12x15mm, 5130181515: 18x15x15mm, 5130181815: 18x18x15mm, 5130182215: 18x22x15mm, 5130181416: 18x14x16mm, 5130181616: 18x16x16mm, 5130181816: 18x18x16mm, 513018618: 18x6x18mm, 5130181018: 18x10x18mm, 5130181218: 18x12x18mm, 5130181418: 18x14x18mm, 5130181518: 18x15x18mm, 5130181618: 18x16x18mm, 5130182218: 18x22x18mm, 5130182818: 18x28x18mm, 5130221212: 22x12x12mm, 5130221414: 22x14x14mm, 5130221614: 22x16x14mm, 5130221814: 22x18x14mm, 5130222214: 22x22x14mm, 5130221215: 22x12x15mm, 5130221515: 22x15x15mm, 5130221815: 22x18x15mm, 5130222212: 22x22x12mm, 5130222215: 22x22x15mm, 5130221616: 22x16x16mm, 5130221816: 22x18x16mm, 5130222216: 22x22x16mm, 5130221218: 22x12x18mm, 5130221418: 22x14x18mm, 5130221518: 22x15x18mm, 5130221618: 22x16x18mm, 5130221818: 22x18x18mm, 5130222218: 22x22x18mm, 513022622: 22x6x22mm, 5130221022: 22x10x22mm, 5130221222: 22x12x22mm, 5130221422: 22x14x22mm, 5130221522: 22x15x22mm, 5130221622: 22x16x22mm, 5130221822: 22x18x22mm, 5130222822: 22x28x22mm, 5130281515: 28x15x15mm, 5130281815: 28x18x15mm, 5130282215: 28x22x15mm, 5130282815: 28x28x15mm, 5130282816: 28x28x16mm, 5130281518: 28x15x18mm, 5130281818: 28x18x18mm, 5130282216: 28x22x16mm, 5130282218: 28x22x18mm, 5130282818: 28x28x18mm, 5130281522: 28x15x22mm, 5130281622: 28x16x22mm, 5130281822: 28x18x22mm, 5130282222: 28x22x22mm, 5130282822: 28x28x22mm, 5130281028: 28x10x28mm, 5130281228: 28x12x28mm, 5130281428: 28x14x28mm, 5130281528: 28x15x28mm, 5130281628: 28x16x28mm, 5130281828: 28x18x28mm, 5130282228: 28x22x28mm, 5130283528: 28x35x28mm, 5130353515: 35x35x15mm, 5130352818: 35x28x18mm, 5130353518: 35x35x18mm, 5130352222: 35x22x22mm, 5130352822: 35x28x22mm, 5130353522: 35x35x22mm, 5130351528: 35x15x28mm, 5130351828: 35x18x28mm, 5130352228: 35x22x28mm, 5130352828: 35x28x28mm, 5130353528: 35x35x28mm, 5130351535: 35x15x35mm, 5130351835: 35x18x35mm, 5130352235: 35x22x35mm, 5130352835: 35x28x35mm, 5130354235: 35x42x35mm, 5130422828: 42x28x28mm, 5130421542: 42x15x42mm, 5130421842: 42x18x42mm, 5130422242: 42x22x42mm, 5130422842: 42x28x42mm, 5130423542: 42x35x42mm, 5130425442: 42x54x42mm, 5130424222: 42x42x22mm, 5130424228: 42x42x28mm, 5130422235: 42x22x35mm, 5130422835: 42x28x35mm, 5130423535: 42x35x35mm, 5130424235: 42x42x35mm, 5130541554: 54x15x54mm, 5130541854: 54x18x54mm, 5130542254: 54x22x54mm, 5130542854: 54x28x54mm, 5130543554: 54x35x54mm, 5130544254: 54x42x54mm, 5130542842: 54x28x42mm, 5130543542: 54x35x42mm, 5130544242: 54x42x42mm, 5130545442: 54x54x42mm, 5130643564: 64x35x64mm, 5130644264: 64x42x64mm, 5130645464: 64x54x64mm, 5130672267: 67x22x67mm, 5130672867: 67x28x67mm, 5130673567: 67x35x67mm, 5130674267: 67x42x67mm, 5130675467: 67x54x67mm, 5130676754: 67x67x54mm, 5130705470: 70x54x70mm, 5130762876: 76x28x76mm, 5130763576: 76x35x76mm, 5130764276: 76x42x76mm, 5130765476: 76x54x76mm, 5130766476: 76x64x76mm, 5130766776: 76x67x76mm, 5130894289: 89x42x89mm, 5130895489: 89x54x89mm, 5130897689: 89x76x89mm, 513010828108: 108x28x108mm, 513010835108: 108x35x108mm, 513010842108: 108x42x108mm, 513010854108: 108x54x108mm, 513010867108: 108x67x108mm, 513010876108: 108x76x108mm, 513010889108: 108x89x108mm. 5243G series - Straight tap connector: 5243G1512: 15mmx1/2"captive nut, 5243G1534: 15mmx3/4"captive nut, 5243G1834: 18mmx3/4"captive nut, 5243G2234: 22mmx3/4"captive nut, 5243G221: 22mmx1"captive nut, 5243G281: 28mmx1"captive nut. 5002G series - Bent tap connector: 5002G1512: 15mmx1/2"captive nut, 5002G1534: 15mmx3/4"captive nut, 5002G1834: 18mmx3/4"captive nut, 5002G2234: 22mmx3/4"captive nut, 5002G221: 22mmx1"captive nut, 5002G281: 28mmx1"captive nut. 5301 series - End cap: 53016: 6mm, 53018: 8mm, 530110: 10mm, 530112: 12mm, 530114: 14mm, 530115: 15mm, 530116: 16mm, 530118: 18mm, 530122: 22mm, 530128: 28mm, 530135: 35mm, 530140: 40mm, 530142: 42mm, 530154: 54mm, 530164: 64mm, 530167: 67mm, 530176: 76mm, 530189: 89mm, 5301108: 108mm. 5060 series - Bend 180°: 50606: 6mm, 50608: 8mm, 506010: 10mm, 506012: 12mm, 506015: 15mm, 506016: 16mm, 506018: 18mm, 506022: 22mm, 506028: 28mm, 506035: 35mm, 506042: 42mm, 506054: 54mm.

Approval Holder:

Linhai Hengye Tubing Equipment Co., Ltd

Company Name

Linhai Hengye Tubing Equipment Co., Ltd

Address

Machinery Industrial Park, Duqiao Town, Linhai City

Country

China

Phone

0086‐576‐85528079

General Email

sales@zjhengye.com

View All Listings by this Company

Range of water meters with plastic bodies and EPDM ‘O’-rings. The inlets incorporate a plastic strainer. Maximum working pressure 10.0 Bar Maximum operating temperature 50.0°C

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1¼” BSP M 1½” BSP M

Marking:

Arad on cover. Flow arrow and size on body. Arad and product info on dial face

Installation Requirements:

R001

Expiry date:

30/11/2030

Model:

M DN25 1” WITH POLYMER BODY – Inlet thread 1’’ BSP 1¼" BSP Outlet thread 1’’ BSP or 1¼'' BSP M DN32 1¼''” WITH POLYMER BODY - Inlet thread 1¼'' "BSP 1½ " BSP Outlet thread 1¼'' BSP or 1½ " BSP

Manufacturer:

Arad GROUP Ltd.

Company Name

Arad GROUP Ltd.

Address

Kibbutz Dalia 1923900 Kibutzz Dalia

Country

Israel

Phone

+972-4-9897906

View All Listings by this Company

Range of in-line water meters incorporating bronze copper alloy bodies and EPDM O rings. Maximum working pressure 10.0 Bar Maximum operating temperature 30.0°C

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

EMS, Model and other technical data on water meter dial

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

TH15 – DN 15 CNPA 49 Male Pipe Thread (25.8mm) TH20 – DN 20 CNPA 49 Male Pipe Thread (33mm) TH25 – DN 25 CNPA 49 Male Pipe Thread (39mm)

Approval Holder:

Energy Management System Co. Ltd.

Company Name

Energy Management System Co. Ltd.

Address

No8, Dali 3rd Rd., Shanhua District, Southern Taiwan Science Park (STSP) Tainan City, Taiwan

Phone

+886-6-5050207

View All Listings by this Company

Shock arrestors with a copper body, plastic shuttle and EPDM ‘O’-rings. Maximum working pressure 10.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

AXCU-A: ½” NPT (M), AXCU-B: ¾” NPT (M), AXCU-C: 1” NPT (M).

Marking:

Aquanox logo, pipe size, model number, pressure and temperature on body

Installation Requirements:

R001

Expiry date:

31/07/2030

Model:

AXCU-A AXCU-B AXCU-C

Approval Holder:

Hydro Point Building Material Trading LLC

Company Name

Hydro Point Building Material Trading LLC

Address

Kasco Tower Al Qiasis Industrial Area 3 Dubai

Country

United Arab Emirates

Phone

0097 1422 18499

View All Listings by this Company

Range of flow sensors incorporating either brass, plastic or stainless steel bodies & EPDM ‘O’-rings. Maximum working pressure 10.0 bar for models VVXA, VVXC, VVXB. Maximum working pressure 16.0 bar for models VVXD & VVXE. Maximum operating temperature 90°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models.

Marking:

Sika logo, pressure, temperature, other tech info on body; flow arrow on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

VVXA Vortex Flow Sensor Type VVX15 Vortex Flow Sensor nominal size 15. Body material PPS, G ¾ male or ½” NPT male VVXC Vortex Flow Sensor Type VVX20 Vortex Flow Sensor nominal size 20. Body material PPS G 1 male or ¾” NPT male or Quick-Fasten male/female VVXB Vortex Flow Sensor Type VVX25 Vortex Flow Sensor nominal size 25. Body material PPS G 1¼ male or 1” NPT male VVXD Vortex Flow Sensor Type VVX32 Vortex Flow Sensor nominal size 32. Body material brass or stainless steel G 1½ male or 1½” NPT male VVXE Vortex Flow Sensor Type VVX40 Vortex Flow Sensor nominal size 40. Body material brass or stainless steel G 2 male or 2” NPT male • digit 1,2,3: Designation of the series o VVX >>> VVX series • digit 4: nominal diameter o A >>> DN 15 for type VVX15 o C >>> DN 20 for type VVX20 o B >>> DN 25 for type VVX25 o D >>> DN 32 for type VVX32 o E >>> DN 40 for type VVX40 • digit 5,7,8,9,10,11,12,13,14,15: Device configuration • digit 6: Private label o S >>> SIKA (standard) o E >>> SIKA (standard) with ETL marking • digit 4 and 16: tube material / process connection o A and 4 >>> PPS – G 3/4 male thread o A and C >>> PPS – ½”NPT male thread o C and P >>> PPS – Quick-Fasten connection o C and 7 >>> PPS – G 1 male thread o C and 8 >>> PPS – 3/4" NPT male thread o B and 6 >>> PPS – G 1 1/4 male thread o B and E >>> PPS – 1” NPT male thread o D and U >>> Brass – G 1 1/2 male thread o D and 0 >>> Brass – 1½" NPT male thread o D and M >>> Stainless steel – G 1 1/2 male thread o D and Y >>> Stainless steel – 1½" NPT male thread o E and X >>> Brass – G 2 male thread o E and 9 >>> Brass – 2" NPT male thread o E and O >>> Stainless steel – G 2 male thread o E and Z >>> Stainless steel – 2" NPT male thread

Approval Holder:

SIKA Systemtechnik GmbH

Company Name

SIKA Systemtechnik GmbH

Address

Struthweg 7-9 Kaufungen

Postcode

34260

Country

Germany

Phone

+49 5605 803 652

General Email

grass@sika.net

View All Listings by this Company

Range of EPDM expansion joints with flanged end conenctors. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1530 Miscellaneous Fittings

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

SHANGHAI LIANYANG METAL & RUBBER CO., LTD logo (‘MR-FLEX’) and size on body.

Installation Requirements:

R001

Expiry date:

30/09/2030

Model:

S-100: DN32 - DN300, S-101: DN25 - DN300, S-115: DN25 - DN300.

Approval Holder:

SHANGHAI LIANYANG METAL & RUBBER CO., LTD

Company Name

SHANGHAI LIANYANG METAL & RUBBER CO., LTD

Address

No.2 Building, No.399 Zhongqu Road, Industrial estate Maogang Town, Songjiang, Shanghai

Country

China

General Email

sha.lyang@kenpogroup.com

View All Listings by this Company

Manufacturer:

SHANGHAI LIANYANG METAL & RUBBER CO., LTD

Company Name

SHANGHAI LIANYANG METAL & RUBBER CO., LTD

Address

No.2 Building, No.399 Zhongqu Road, Industrial estate Maogang Town, Songjiang, Shanghai

Country

China

General Email

sha.lyang@kenpogroup.com

View All Listings by this Company