"Yi Sin" Range of press fittings with a stainless steel body and EPDM ‘O’ rings for use with stainless steel 316L pipe manufactured to EN10312. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1180 Fittings for use with Tube and Pipe

Section Subtitle:

Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2101375

Size:

see model

Marking:

Yi Sin (Trademark of Bing-Fu) and size on body.

Installation Requirements:

R001

Expiry date:

31/01/2026

Model:

Y-S615 Equal coupling 15mm Y-S618 Equal coupling 18mm Y-S622 Equal coupling 22mm Y-S628 Equal coupling 28mm Y-S635 Equal coupling 35mm Y-S642 Equal coupling 42mm Y-S654 Equal coupling 54mm Y-BS615 Adjustable coupling 15mm Y-BS618 Adjustable coupling 18mm Y-BS622 Adjustable coupling 22mm Y-BS628 Adjustable coupling 28mm Y-BS635 Adjustable coupling 35mm Y-BS642 Adjustable coupling 42mm Y-BS654 Adjustable coupling 54mm Y-90E615 90° equal elbow 15mm Y-90E618 90° equal elbow 18mm Y-90E622 90° equal elbow 22mm Y-90E628 90° equal elbow 28mm Y-90E635 90° equal elbow 35mm Y-90E642 90° equal elbow 42mm Y-90E654 90° equal elbow 54mm Y-90EB615 90° plain elbow‐B 15mm Y-90EB618 90° plain elbow‐B 18mm Y-90EB622 90° plain elbow‐B 22mm Y-90EB628 90° plain elbow‐B 28mm Y-90EB635 90° plain elbow‐B 35mm Y-90EB642 90° plain elbow‐B 42mm Y-90EB654 90° plain elbow‐B 54mm Y-45E615 45° equal elbow 15mm Y-45E618 45° equal elbow 18mm Y-45E622 45° equal elbow 22mm Y-45E628 45° equal elbow 28mm Y-45E635 45° equal elbow 35mm Y-45E642 45° equal elbow 42mm Y-45E654 45° equal elbow 54mm Y-45EB615 45° plain elbow‐B 15mm Y-45EB618 45° plain elbow‐B 18mm Y-45EB622 45° plain elbow‐B 22mm Y-45EB628 45° plain elbow‐B 28mm Y-45EB635 45° plain elbow‐B 35mm Y-45EB642 45° plain elbow‐B 42mm Y-45EB654 45° plain elbow‐B 54mm Y-3T615 Equal tee 15mm Y-3T618 Equal tee 18mm Y-3T622 Equal tee 22mm Y-3T628 Equal tee 28mm Y-3T635 Equal tee 35mm Y-3T642 Equal tee 42mm Y-3T654 Equal tee 54mm Y-3TR61815 Reducing tee 18mm×15mm Y-3TR62215 Reducing tee 22mm×15mm Y-3TR62218 Reducing tee 22mm×18mm Y-3TR62815 Reducing tee 28mm×15mm Y-3TR62818 Reducing tee 28mm×18mm Y-3TR62822 Reducing tee 28mm×22mm Y-3TR63515 Reducing tee 35mm×15mm Y-3TR63518 Reducing tee 35mm×18mm Y-3TR63522 Reducing tee 35mm×22mm Y-3TR63528 Reducing tee 35mm×28mm Y-3TR64215 Reducing tee 42mm×15mm Y-3TR64218 Reducing tee 42mm×18mm Y-3TR64222 Reducing tee 42mm×22mm Y-3TR64228 Reducing tee 42mm×28mm Y-3TR64235 Reducing tee 42mm×35mm Y-3TR65415 Reducing tee 54mm×15mm Y-3TR65418 Reducing tee 54mm×18mm Y-3TR65422 Reducing tee 54mm×22mm Y-3TR65428 Reducing tee 54mm×28mm Y-3TR65435 Reducing tee 54mm×35mm Y-3TR65442 Reducing tee 54mm×42mm Y-SS61512 Female coupling 15mm×Rp1/2’’ Y-SS62234 Female coupling 22mm×Rp3/4” Y-SS6281 Female coupling 28mm×Rp1” Y-SS635114 Female coupling 35mm×Rp1‐“1/4” Y-SS642112 Female coupling 42mm×Rp1‐1/2” Y-SS6542 Female coupling 54mm×Rp2” Y-MU61512 Rotatable coupling 15mm×G1/2” Y-MU61812 Rotatable coupling 18mm×G1/2” Y-MU62234 Rotatable coupling 22mm×G3/4” Y-MU6281 Rotatable coupling 28mm×G1” Y-MU635114 Rotatable coupling 35mm×G1‐1/4” Y-MU642112 Rotatable coupling 42mm×G1‐1/2” Y-MU6542 Rotatable coupling 54mm×G2” Y-SM61512 Male coupling 15mm×12” Y-SM61812 Male coupling 18mm×12” Y-SM62234 Male coupling 22mm×R3/4” Y-SM6281 Male coupling 28mm×R1” Y-SM635114 Male coupling 35mm×R1‐1/4” Y-SM642112 Male coupling 42mm×R1‐1/2” Y-SM6542 Male coupling 54mm×R2” Y-90SEL61512 Female elbow 15mm×Rp1/2” Y-90SEL61812 Female elbow 18mm×Rp1/2” Y-90SEL62234 Female elbow 22mm×Rp3/4” Y-90SEL6281 Female elbow 28mm×Rp1” Y-90SEL635114 Female elbow 35mm×Rp1‐1/4” Y-90SEL642112 Female elbow 42mm×Rp1‐1/2” Y-90SEL6542 Female elbow 54mm×Rp2” Y-90EM61512 Male elbow 15mm×12” Y-90EM61812 Male elbow 18mm×12” Y-90EM62212 Male elbow 22mm×12” Y-90EM62234 Male elbow 22mm×R3/4” Y-90EM6281 Male elbow 28mm×R1” Y-90EM635114 Male elbow 35mm×R1‐1/4” Y-90EM642112 Male elbow 42mm×R1‐1/2” Y-90EM6542 Male elbow 54mm×R2” Y-3TF61512 Female tee 15mm×Rp1/2” Y-3TF61812 Female tee 18mm×Rp1/2” Y-3TF62234 Female tee 22mm×Rp3/4” Y-3TF62812 Female tee 28mm×Rp1/2 Y-3TF6281 Female tee 28mm×Rp1” Y-3TF635114 Female tee 35mm×Rp1‐1/4” Y-3TF642112 Female tee 42mm×Rp1‐1/2” Y-3TF6542 Female tee 54mm×Rp2” Y-3MF61512 Male tee 15mm×12” Y-3MF61812 Male tee 18mm×12” Y-3MF62234 Male tee 22mm×R3/4” Y-3MF62812 Male tee 28 mm×12’’ Y-3MF6281 Male tee 28mm×R1” Y-3MF635114 Male tee 35mm×R1‐1/4” Y-3MF642112 Male tee 42mm×R1‐1/2” Y-3MF6542 Male tee 54mm×R2” Y-RS61815 Reducer‐A 18mm×15mm Y-RS62215 Reducer‐A 22mm×15mm Y-RS62218 Reducer‐A 22mm×18mm Y-RS62815 Reducer‐A 28mm×15mm Y-RS62818 Reducer‐A 28mm×18mm Y-RS62822 Reducer‐A 28mm×22mm Y-RS63515 Reducer‐A 35mm×15mm Y-RS63518 Reducer‐A 35mm×18mm Y-RS63522 Reducer‐A 35mm×22mm Y-RS63528 Reducer‐A 35mm×28mm Y-RS64215 Reducer‐A 42mm×15mm Y-RS64218 Reducer‐A 42mm×18mm Y-RS64222 Reducer‐A 42mm×22mm Y-RS64228 Reducer‐A 42mm×28mm Y-RS64235 Reducer‐A 42mm×35mm Y-RS65442 Reducer‐A 54mm×42mm Y-RSB61815 Reducer Coupling‐B 18mm×15mm Y-RSB62215 Reducer Coupling‐B 22mm×15mm Y-RSB62218 Reducer Coupling‐B 22mm×18mm Y-RSB62815 Reducer Coupling‐B 28mm×15mm Y-RSB62818 Reducer Coupling‐B 28mm×18mm Y-RSB62822 Reducer Coupling‐B 28mm×22mm Y-RSB63515 Reducer Coupling‐B 35mm×15mm Y-RSB63518 Reducer Coupling‐B 35mm×18mm Y-RSB63522 Reducer Coupling‐B 35mm×22mm Y-RSB63528 Reducer Coupling‐B 35mm×28mm Y-RSB64215 Reducer Coupling‐B 42mm×15mm Y-RSB64218 Reducer Coupling‐B 42mm×18mm Y-RSB64222 Reducer Coupling‐B 42mm×22mm Y-RSB64228 Reducer Coupling‐B 42mm×28mm Y-RSB64235 Reducer Coupling‐B 42mm×35mm Y-RSB65415 Reducer Coupling‐B 54mm×15mm Y-RSB65418 Reducer Coupling‐B 54mm×18mm Y-RSB65422 Reducer Coupling‐B 54mm×22mm Y-RSB65428 Reducer Coupling‐B 54mm×28mm Y-RSB65435 Reducer Coupling‐B 54mm×35mm Y-RSB65442 Reducer Coupling‐B

Approval Holder:

BING - FU Enterprise Co.Ltd

Company Name

BING - FU Enterprise Co.Ltd

Address

NO. 5, ALY. 60, LN. 407, RENXIAO RD., RENWU DIST., KAOHSIUNG CITY 814025

Country

Taiwan

View All Listings by this Company

Allpex range of end feed capillary fittings and brazing fittings for use with copper tube (manufactured to BS EN 1057). EG fittings have gunmetal bodies, ED fittings have DZR brass bodies & EB fittings have brass bodies. For above ground use only. Maximum working pressure: 6mm – 34mm 25Bar, 34mm -54mm 25Bar, 54mm – 108mm 16Bar, 108mm – 159mm 5 Bar. Maximum operating temperature 30°C

Section:

1210 Fittings for use with Tube and Pipe

Section Subtitle:

End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

240502052

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model list

Marking:

1254, AL logo and size on body

Installation Requirements:

R001

Expiry date:

31/05/2029

Model:

EC10 – Straight Coupler CxC EC10 – 6mm EC10 – 8mm EC10 – 10mm EC10 –12mm EC10 –15mm EC10 –18mm EC10 –22mm EC10 –28mm EC10 –35mm EC10 –42mm EC10 –54mm EC10 –66.7mm EC10 –76.1mm EC10 –108mm EC10 –133mm EC10 –159mm EC10S – Slip Coupler without Stop EC10S –15mm EC10S –18mm EC10S –22mm EC10S –28mm EC10S –35mm EC10S –42mm EC10S –54mm EC10U -Straight Union CxC Copper Tail EC10U –15mm EC10U –22mm EC10U –28mm EC10U –35mm EC10U –42mm EC10U –54mm EC10X – Full Crossover CxC EC10X –10mm EC10X –12mm EC10X –15mm EC10X –18mm EC10X –22mm EC10XF – Part Crossover FTGxC EC10XF –10mm EC10XF –12mm EC10XF –15mm EC10XF –18mm EC10XF –22mm EC11 – Reducing Coupler CxC (Sizes EC11 - 108 = 10x8mm) EC11 –108 EC11 –128 EC11 –1210 EC11 –158 EC11 –1510 EC11 –1512 EC11 –1810 EC11 –1812 EC11 –1815 EC11 –2215 EC11 –2218 EC11 –2815 EC11 –2818 EC11 –2822 EC11 –3515 EC11 –3522 EC11 –3528 EC11 –4215 EC11 –4222 EC11 –4228 EC11 –4235 EC11 –5415 EC11 –5422 EC11 –5428 EC11 –5435 EC11 –5442 EC11 –5428 EC11 –5435 EC11 –5442 EC11 –6742 EC11 –6754 EC11 –7635 EC11 –7642 EC11 –7654 EC11 –7667 EC11 –10854 EC11 –10867 EC11 –10876 EC11F – Fitting Reducer FTG x C (Sizes EC11F – 86 = 8x6mm) EC11F –86 EC11F –106 EC11F –108 EC11F –128 EC11F –1210 EC11F –158 EC11F –1510 EC11F –1512 EC11F –1810 EC11F –812 EC11F –1815 EC11F –2212 EC11F –2215 EC11F –2218 EC11F –2815 EC11F –2818 EC11F –1822 EC11F –3515 EC11F –3518 EC11F –3522 EC11F –3528 EC11F –4215 EC11F –4218 EC11F –4222 EC11F –4228 EC11F –4235 EC11F –5415 EC11F –5418 EC11F –5422 EC11F –5428 EC11F –5435 EC11F –5442 EC11F –6728 EC11F –6735 EC11F –6742 EC11F –6754 EC11F –7635 EC11F –7642 EC11F –7654 EC11F –7667 EC11F –10842 EC11F –10854 EC11F –10867 EC11F –10876 EC11F –13367 EC11F – 13376 EC11F –133108 EC11F –15954 EC11F –15967 EC11F –15976 EC11F –159108 EC11F –159133 EC11FL – Long Fitting Reducer FTG x C (EC11FL – 158 = 15x8mm) EC11FL –158 EC11FL –1510 EC11FL –2215 EC11MI - Metric x Imperial Coupler C x C: EC11MI -15D – 15mmx1/2” EC11MI -22E – 22mmx3/4” EC11MI -28F – 28mmx1” EC11MI -35G – 35mmx11/4” EC12U – Straight male union C x MI (taper) cone joint, copper tail (boiler union): EC12U –15D - 15mmx1/2”BSP EC12U –22E – 22mmx ¾”BSP EC12U –22F – 22mmx1”BSP EC12U –28F – 28mmx1”BSP EC12U –35G – 35mmx11/4”BSP EC12U –42H – 42mmx11/2”BSP EC12U –54I – 54mmx2”BSP EC14U – Straight female union, C x FI cone joint, Copper tail: EC14U –15D – 15mmx1/2”BSP EC14U –22E – 22mmx ¾”BSP EC14U –28F – 28mmx1”BSP EC14U –35G – 35mmx11/4”BSP EC14U –42H – 42mmx11/2”BSP EC14U –54I – 54mmx2”BSP EC16 – Straight tep connector, C x FI (swivel) + Washer: EC16 –15D – 15mmx1/2”BSP EC16 –15E – 15mmx3/4”BSP EC16 –22E – 22mmx ¾”BSP EC16C – Cylinder Connector, C x FI (Swivel): EC16C –22F – 22mmx1”BSP EC16C –28F – 28mmx1”BSP EC16CF – Fitting Cylinder Connector, FTG x FI (Swivel): EC16CF –22F – 22mmx1”BSP EC16G – Gas meter union, C x FI (Swivel + Washer to BS746: EC16G –22E – 22mmx ¾”BSP EC16G –22F – 22mmx1”BSP EC16G –28F – 28mmx1”BSP EC17 – End Cap: EC17 – 6mm EC17 – 8mm EC17 – 10mm EC17 –12mm EC17 –15mm EC17 –18mm EC17 –22mm EC17 –28mm EC17 –35mm EC17 –42mm EC17 –54mm EC17 –66.7mm EC17 –76.1mm EC17 –108mm EC17 –133mm EC17 –159mm EC17A – Copper Airvent Cap, C x Cap Knurled cap air release: EC17A –15 - 15mm EC17A –22 – 22mm EC17AF - Copper Airvent Plug, Ftg x Cap Knurled cap air release: EC17AF –15 - 15mm EC20 – Elbow, C x C: EC20 – 6mm EC20 – 8mm EC20 – 10mm EC20 –12mm EC20 –15mm EC20 –18mm EC20 –22mm EC20 –28mm EC20 –35mm EC20 –42mm EC20 –54mm EC20 –66.7mm EC20 –76.1mm EC20 –108mm EC20 –133mm EC20 –159mm EC20F – Fitting (Street) Elbow, Ftg x C: EC20F – 10mm EC20F –12mm EC20F –15mm EC20F –18mm EC20F –22mm EC20F –28mm EC20F –35mm EC20F –42mm EC20F –54mm EC20F –66.7mm EC20F –76.1mm EC20F –108mm EC20FLS – Long Shank Fitting Elbow, Ftg (long) x C: EC20FLS –15mm EC20FLS –22mm EC20FLS –28mm EC20L – Long Radius Bend, C x C: EC20L – 10mm EC20L –12mm EC20L –15mm EC20L –18mm EC20L –22mm EC20L –28mm EC20L –35mm EC20L –42mm EC20L –54mm EC20L –66.7mm EC20L –76.1mm EC20L –108mm EC20L –133mm EC20L –159mm EC20LF- Long Radius Fitting Bend, Ftg x C: EC20LF – 10mm EC20LF –12mm EC20LF –15mm EC20LF –18mm EC20LF –22mm EC20LF –28mm EC20LF –35mm EC20LF –42mm EC20LF –54mm EC20LF –66.7mm EC20LF –76.1mm EC20LF –108mm EC25 – Obtuse Elbow (45/135 drg), C x C: EC25 – 10mm EC25–12mm EC25 –15mm EC25 –18mm EC25–22mm EC25 –28mm EC25 –35mm EC25 –42mm EC25 –54mm EC25 –66.7mm EC25 –76.1mm EC25 –108mm EC25 –133mm EC25 –159mm EC25F – Fitting Obtuse Elbow (45/135 drg), Ftg x C: EC25F – 10mm EC25F–12mm EC25F –15mm EC25F –18mm EC25F–22mm EC25F –28mm EC25F –35mm EC25F –42mm EC25F –54mm EC25F –66.7mm EC25F –76.1mm EC25F –108mm EC26 – Bent tap connector, C x Fi (swivel) + washer: EC26 –15D – 15mm x ½”BSP EC26 –15E – 15mm x ¾”BSP EC26 –22E – 22mm x ¾”BSP EC26C – Bent cylinder connector, C x Fi (swivel): EC26C –15E – 15mm x 3/4”BSP EC26C –22E – 22mm x ¾”BSP EC30 – Equal Tee, C x C x C: EC30 – 6mm EC30 – 8mm EC30 – 10mm EC30 –12mm EC30 –15mm EC30 –18mm EC30 –22mm EC30 –28mm EC30 –35mm EC30 –42mm EC30 –54mm EC30 –66.7mm EC30 –76.1mm EC30 –108mm EC30 –133mm EC30 –159mm EC31 – Reducing Tee, C x C x C (e.g. EC31 – 8810 – 8mm x 8mm x 10mm): EC31 –8810 EC31 –1088 EC31 –10810 EC31 –101012 EC31 –101015 EC31 –121010 EC31 –121012 EC31 –12128 EC31 –121210 EC31 –121215 EC31 –151010 EC31 –151015 EC31 –151212 EC31 –151215 EC31 –15158 EC31 –151510 EC31 –151512 EC31 –151518 EC31 –151522 EC31 –181515 EC31 –181518 EC31 –181812 EC31 –181815 EC31 –181822 EC31 –221515 EC31 –221522 EC31 –222210 EC31 –222215 EC31 –222218 EC31 –222228 EC31 –222235 EC31 –281515 EC31 –281522 EC31 –281528 EC31 –282215 EC31 –282222 EC31 –282228 EC31 –282815 EC31 –282822 EC31 –282835 EC31 –351535 EC31 –352222 EC31 –352235 EC31 –352822 EC31 –352828 EC31 –352835 EC31 –353515 EC31 –353522 EC31 –353528 EC31 –353542 EC31 –422242 EC31 –422828 EC31 –422842 EC31 –423535 EC31 –423542 EC31 –424215 EC31 –424222 EC31 –424228 EC31 –424235 EC31 –424254 EC31 –543535 EC31 –543554 EC31 –544242 EC31 –544254 EC31 –545415 EC31 –545422 EC31 –545428 EC31 –545435 EC31 –545442 EC31 –674267 EC31 –675467 EC31 –676728 EC31 –676735 EC31 –676742 EC31 –676754 EC31 –765476 EC31 –766776 EC31 –767642 EC31 –767654 EC31 –767667 EC31 –10810854 EC31 –10810867 EC31 –10810876 EC31 –13313367 EC31 –13313376 EC31 –133133108 EC31 –15915976 EC31 –159159108 EC31 –159159133 EB14 – Female Coupler, C x Fi: EB14 –8B – 8mm x ¼”BSP(F) EB14 –10B – 10mm x ¼”BSP(F) EB14 –10C – 10mm x 3/8”BSP(F) EB14 –12B – 12mm x ¼”BSP(F) EB14 –12C – 12mm x 3/8”BSP(F) EB14 –15B – 15mm x ¼”BSP(F) EB10M – Brass Manifold (e.g EB10m-22102 – 22mm x 10-2 mm): EB10M –22102 EB10M –22103 EB10M –22104 EB10M –2282 EB10M –2283 EB10M –2284 EB10P – Manifold Plug: EB10P – 108 – 10mm x 8mm EB11F2 – 2 in 1 Fitting reducer, Ftg x C: EB11F2 –15108 – 15mm x 10-8mm EG12 – Straight male coupler, C x Mi (taper): EG12 –15C – 15mm x 3/8”BSP (M) EG12 –15D – 15mm x 1/2”BSP (M) EG12 –15E – 15mm x 3/4”BSP (M) EG12 –22E – 22mm x ¾”BSP(M) EG12 –28F – 28mm x 1”BSP(M) EG12 –35G – 35mm x 11/4”BSP(M) EG12 –42H – 42mm x 11/2”BSP(M) EG12 –54I – 54mm x 2”BSP(M) EG12 –67J – 67mm x 21/2”BSP (M) EG12 –76K – 76.1mm x 3”BSP (M) EG12 –108L – 108 x 4”BSP(M) EG14 – Straight Female Coupler C x Fi: EG14 –15C – 15mm x 3/8”BSP (M) EG14 –15D – 15mm x 1/2”BSP (M) EG14 –15E – 15mm x 3/4”BSP (M) EG14 –22E – 22mm x ¾”BSP(M) EG14 –28F – 28mm x 1”BSP(M) EG14 –35G – 35mm x 11/4”BSP(M) EG14 –42H – 42mm x 11/2”BSP(M) EG14 –54I – 54mm x 2”BSP(M) EG14 –67J – 67mm x 21/2”BSP (M) EG14 –76K – 76.1mm x 3”BSP (M) EG14 –108L – 108 x 4”BSP(M) EB12 – Straight male coupler, C x MI (taper): EB12 –8B – 8mm x ¼”BSP(M) EB12 –10B – 10mm x ¼”BSP (M) EB12 –10C – 10mm x 3/8”BSP (M) EB12 –12B – 12mm x ¼”BSP(M) EB12 –12C – 12mm x 3/8”BSP (M) EB12 –15B – 15mm x ¼”BSP(M) EB12F – Male Stub adaptor Ftg x MI (taper): EB12F –8B – 8mm x ¼”BSP(M) EB12F –10B – 10mm x ¼”BSP (M) EB12F –10C – 10mm x 3/8”BSP (M) EB12F –12B – 12mm x ¼”BSP(M) EB12F –12C – 12mm x 3/8”BSP (M) EB12F –15B – 15mm x ¼”BSP(M) EB17A – Brass Airvent cap, C x Cap: EB17A –15mm EB17A –22mm EB17AF – Brass Airvent Plug, Ftg x Cap: EB17AF –15mm

Product Images

Approval Holder:

Allpex Ltd.

Company Name

Allpex Ltd.

Address

261 Water Road, Abbeydale Industrial Estate, Wembley Middlesex

Postcode

HA0 1HX

Country

United Kingdom

Phone

00 44 208 810 4546

General Email

product@allpex.com

View All Listings by this Company

Range of dual flush syphonic WC flush valves. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

240402716

Size:

1 1/2” BSP (M)

Marking:

Flomasta (Brand of Kingfisher) on top of cap WRAS on body

Installation Requirements:

R001 R571 R581

Expiry date:

30/04/2029

Model:

C10100849 & C10100850

Approval Holder:

Kingfisher International Products Ltd.

Company Name

Kingfisher International Products Ltd.

Address

1 Paddington Square, London

Postcode

W2 1GG

Phone

07721 260713

General Email

eric.capotummino@kingfisher.com

View All Listings by this Company

Range of dual flush syphonic WC flush valves. Cold water use only.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

240402717

Size:

1 1/2” BSP (M)

Marking:

Flomasta (Brand of Kingfisher) on top of cap WRAS on body

Installation Requirements:

R001 R571 R581

Expiry date:

30/04/2029

Model:

C10100849 & C10100850

Approval Holder:

Kingfisher International Products B.V

Company Name

Kingfisher International Products B.V

Address

Rapenburgerstraat 175E, 1011 VM Amsterdam

Country

Netherlands

View All Listings by this Company

Range of direct fired water heaters with an enamel lining and a titanium anode. Fitted with a temperature and pressure relief valve set at 10.0 bar & 95°C. Maximum working pressure 8.0 bar. Maximum operating temperature 85°C.

Section:

1400 Heaters

Section Subtitle:

Gas fired, closed outlet. Heat retained in water heaters may cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to prevent excess pressure within the system.

WRAS Approval Number:

240504713

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Please refer to model.

Marking:

Company logo (AO Smith), model, and technical information on body.

Installation Requirements:

R001 R140

Expiry date:

31/05/2029

Model:

IR 12-160,IR 12-200,IR 20-160,IR 20-200,IR 24-245,IR 24-285,IR 32-245,IR 32-285 & IR 32-380

Product Images

Approval Holder:

A.O.Smith Water Products Company B.V.

Company Name

A.O.Smith Water Products Company B.V.

Address

De Run 5305 Veldhoven

Postcode

5503 LW

Country

Netherlands

Phone

+31 (0) 40 294 2560

General Email

hmichiels@aosmith.com

View All Listings by this Company

Manufacturer:

A.O.Smith Water Products Company B.V.

Company Name

A.O.Smith Water Products Company B.V.

Address

De Run 5305 Veldhoven

Postcode

5503 LW

Country

Netherlands

Phone

+31 (0) 40 294 2560

General Email

hmichiels@aosmith.com

View All Listings by this Company

Range of wall mounted combination boilers providing domestic hot water via a plate heat exchanger and pressurised central heating system. The primary circuit incorporates a pressure relief valve set at 3.0 bar and an expansion vessel. The products are supplied with isolation valve on both the DHW and CH circuits. The secondary circuit (DHW) incorporates a plastic flow restrictor and stainless-steel strainer. Some models (see model section) are supplied with a filling loop assembly consisting of an in-line isolation valve, an in-line double check valve assembly which incorporates an isolation valve. Maximum working pressures: DHW: 10.0 Bar CH: 2.5 Bar Maximum operating temperature: DHW: 65.0°C CH: 85.0°C

Section:

1465 Heaters

Section Subtitle:

Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

240502715

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

DHW: 15mm compression. CH: 22mm compression

Marking:

Range name on front cover, Model, Max pressure, Max temperature and product information on data plate on body

Installation Requirements:

R001 R140 R360

Expiry date:

31/05/2029

Model:

Models without a filing loop supplied: 0010016113 - Glow-worm ESSENTIAL 24c -A (H-GB) 0010016115 - Glow-worm ESSENTIAL 28c -A (H-GB) 0010016127 - Heatline CAPRIZ 2 24c -A (H-GB) 0010016128 - Heatline MONZA 2 24c -A (H-GB) 0010016129 - Heatline CAPRIZ 2 28c -A (H-GB) 0010016130 - Heatline MONZA 2 28c -A (H-GB) 0010021401 - Glow-worm EASICOM 3 24c -A (H-GB) 0010021402 - Glow-worm EASICOM 3 28c -A (H-GB) 0010020392 - Vaillant VUW 256/6-3 (H-GB) ecoFIT sustain 825 0010020393 - Vaillant VUW 306/6-3 (H-GB) ecoFIT sustain 830 0010020394 - Vaillant VUW 356/6-3 (H-GB) ecoFITsustain 835 Models with a filling loop supplied: 0010020389 - Vaillant VUW 256/6-3 (H-GB) ecoFIT pure 825 0010020390 - Vaillant VUW 306/6-3 (H-GB) ecoFIT pure 830 0010020391 - Vaillant VUW 356/6-3 (H-GB) ecoFIT pure 835 0010019813 - Vaillant VUW 306/6-3 (P-GB) ecoFIT pure 830 P 0010021204 - Glow-worm BETACOM 4 24c -A (H-GB) 0010021205 - Glow-worm BETACOM 4 30c -A (H-GB) 0010021404 - Glow-worm ULTIMATE 3 30c -A (H-GB) 0010021405 - Glow-worm ULTIMATE 3 35c -A (H-GB) 0010027591 - Glow-worm ENERGY 2 30c -A (P-GB) 0010035896 - Glow-worm ENERGY 7 25c (H-GB) 0010035897 - Glow-worm ENERGY 7 30c (H-GB) 0010035898 - Glow-worm ENERGY 7 35c (H-GB)

Product Images

Approval Holder:

Vaillant GmbH

Company Name

Vaillant GmbH

Address

Berghauser Strasse, 40 D-42859 Remscheid

Country

Germany

Phone

Tel: +49 2191 182126

View All Listings by this Company

Range of wall mounted combination boilers providing domestic hot water (DHW) via a plate heat exchanger and pressurised central heating (CH) system. Incorporating a pressure relief valve set at 3.0 bar and expansion vessel. Supplied with a filling loop assembly consisting of an in-line isolation valve, an in-line double check valve assembly which incorporates an isolation valve. Maximum working pressure Primary circuit (CH) 2.5Bar, Secondary circuit (DHW) 10.0 Bar Maximum operating temperature 90.0°C

Section:

1465 Heaters

Section Subtitle:

Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

240502720

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Primary circuit (CH) ¾” BSP (M), Secondary circuit (DHW) ½” BSP (M).

Marking:

NAVIEN on front of boiler. NAVIEN, Model Number, Max Pressure and other technical info on adhesive label on body

Installation Requirements:

R001 R140 R360

Expiry date:

31/05/2029

Model:

NCB300-28K NCB300-37K NCB300-41K Model added July 2024 NCB300-30K

Product Images

Approval Holder:

KD Navien Co Ltd

Company Name

KD Navien Co Ltd

Address

4F Koami Bldg, 22 Gukhoe daero, 76-gil, Yeongdeungpo-gu, Seoul, 07238 Korea

Phone

+82 2 3489 2200

General Email

www.navien.com

View All Listings by this Company

Manufacturer:

KD Navien Co Ltd

Company Name

KD Navien Co Ltd

Address

4F Koami Bldg, 22 Gukhoe daero, 76-gil, Yeongdeungpo-gu, Seoul, 07238 Korea

Phone

+82 2 3489 2200

General Email

www.navien.com

View All Listings by this Company

Range of integrated water circuits incorporating a plate heat exchanger. The units incorporate a flow sensor, pressure relief valve set at 3.0 bar, and a primary circuit circulation pump. Maximum working pressure secondary circuit 10.0 bar. Maximum working pressure primary circuit 2.5 bar. Maximum operating temperature 70°C. Cold supply only.

Section:

1478 Heater

Section Subtitle:

Combination boilers - accessories and components.

WRAS Approval Number:

240507702

Size:

IWC Std.: Secondary circuit: ½” BSP (M) inlet x ½” BSP (M) outlet. Primary circuit: ¾” BSP (M) inlet x ¾” BSP (M) outlet. IWC Fgr.: Secondary circuit: F4 connection inlet x ½” BSP (M) outlet. Primary circuit: F4 connection inlet x ¾” BSP (M) outlet. IWC Rgr.: Secondary circuit: ½” BSP (M) inlet x F4 connection outlet. Primary circuit: ¾” BSP (M) inlet x ¾” BSP (M) outlet.

Marking:

Flow groups (IWC Fgr.): Grundfos part code, date of manufacture (DD/MM/YY hh:mm:ss), GRUNDFOS and QR code on adhesive label on body. Return groups (IWC Rgr.): Grundfos name and logo on pump. IWC Std.: Complete products will include the markings of the flow and return groups.

Installation Requirements:

R001 R008

Expiry date:

31/05/2029

Model:

IWC Std. UPM3/UPM4/UPS-xx CHB -xx pl xxx-xxxxxxxx The IWC Std. comprises of the following Flow and Return groups (available separately). IWC Fgr xxx-xxxxxxxx. IWC Rgr UPM3/UPM4-xx CHB xxx-xxxxxxxx. Where (as applicable): -xx = Pump max head. -xx pl = Plate heat exchanger number of plates (10-32). xxx-xxxxxxxx = Replaced by letters and/or numbers and do not have any bearing on water contact parts.

Product Images

Approval Holder:

Grundfos Holding A/S

Company Name

Grundfos Holding A/S

Address

Poul Due Jensens Vej 7 Bjerringbro

Postcode

DK-8850

Country

Denmark

Phone

+36302482216

General Email

oszilagyi@grundfos.com

View All Listings by this Company

Range of ¼ turn ceramic disc (brass bodies), non rising spindles (brass bodies) or ceramic cartridge headworks (plastic bodies) insertion into specifically dimensioned tap assemblies. Maximum working pressure 10.0 Bar Maximum operating temperature 85.0°C

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

35mm OD, 40mm OD or ½” BSP (M) (see models)

Marking:

CHIXIN logo, WRAS and CX on body

Installation Requirements:

R001

Expiry date:

31/05/2029

Model:

Ceramic Cartridges: CXPKD-02 (40mm OD) CXPKS-02 (40mm OD) Non Rising Spindles: CX-WR-01 (1/2” BSP (M)) CX-WR-02 (1/2” BSP (M)) ¼ Turn Ceramic: CX-WR-03 (1/2” BSP (M)) CX-WR-04 (1/2” BSP (M)) Models added September 2024 Ceramic Cartridges: CXPKD-01 (35mm OD) CXPKS-01 (35mm OD)

Product Images

Approval Holder:

Zhejiang Chixin Group Co. Ltd.

Company Name

Zhejiang Chixin Group Co. Ltd.

Address

Hongsan Industrial Zone Hongchou Tiantai Zhejiang

Country

China

View All Listings by this Company

Range of in-line and concentric water meters with composite bodies, TPE gasket and NBR ‘O’-ring(s). The products have an integral plastic filter. The inlet of the in-line models includes a non-return valve. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

JV600 Q3=2,5 R***: ¾” BSP (M). JV600 Q3=4 R***: 1” BSP (M). JV600 Q3=6,3 R***: 1¼” BSP (M). JV600 Q3=2,5 Concentric R***: ¾” BSP (M). JV600e Q3=2,5 R*** 3/4” BSP (M) JV600e Q3=2,5 Concentric R*** 3/4” BSP (M) JV600e Q3=4 R*** 1” BSP (M) JV600e Q3=6,3 R*** 1 1/4” BSP (M)

Marking:

Janz logo, maximum pressure, CE and other technical information on cover.

Installation Requirements:

R001

Expiry date:

31/05/2029

Model:

In-line water meter: JV600 Q3=2,5 R***. JV600 Q3=4 R***. JV600 Q3=6,3 R***. Concentric water meter: JV600 Q3=2,5 Concentric R***. Models added October 2024 JV600e Q3=2,5 R*** JV600e Q3=2,5 Concentric R*** JV600e Q3=4 R*** JV600e Q3=6,3 R*** Where *** relates to Class of Accuracy of the water meter and can be replaced by: 40, 50, 63, 80, 100, 125, 160, 200, 250, 315, 4100, 500, 630, 800.

Product Images

Approval Holder:

Janz Contagem e Gestão de Fluidos, SA

Company Name

Janz Contagem e Gestão de Fluidos, SA

Address

Av. Infante D. Henrique nº 286 Lisboa

Postcode

1950-421

Country

Portugal

Phone

00351 21 831 6000

General Email

lbras@janz.pt

View All Listings by this Company

Manufacturer:

Janz Contagem e Gestão de Fluidos, SA

Company Name

Janz Contagem e Gestão de Fluidos, SA

Address

Av. Infante D. Henrique nº 286 Lisboa

Postcode

1950-421

Country

Portugal

Phone

00351 21 831 6000

General Email

lbras@janz.pt

View All Listings by this Company

Range of water meters with brass bodies, plastic turbines and plastic strainers on inlets. The products have an integral plastic filter. The inlet includes a non-return valve. Maximum working pressure 16.0 Bar Maximum operating temperature 23.0°C

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP M

Marking:

JANZ logo, Max working pressure, model code, CE and other technical information on meter face

Installation Requirements:

R001

Expiry date:

31/05/2029

Model:

JV400 Q3=2,5 R***, JV400 Q3=2,5 Concentric R***, JV400 Q3=4 R***, JV400 Q3=6,3 R***, JV400 Q3=10 R*** & JV400 Q3=16 R***. Models added October 2024 JV400e Q3=2,5 R*** JV400e Q3=2,5 Concentric R*** JV400e Q3=4 R*** JV400e Q3=6,3 R*** JV400e Q3=10 R*** JV400e Q3=16 R*** Where *** relates to Class of Accuracy of the water meter and can be replaced by: 40, 50, 63, 80, 100, 125, 160, 200, 250, 315, 4100, 500, 630, 800.

Product Images

Approval Holder:

Janz Contagem e Gestão de Fluidos, SA

Company Name

Janz Contagem e Gestão de Fluidos, SA

Address

Av. Infante D. Henrique nº 286 Lisboa

Postcode

1950-421

Country

Portugal

Phone

00351 21 831 6000

General Email

lbras@janz.pt

View All Listings by this Company

Manufacturer:

Janz Contagem e Gestão de Fluidos, SA

Company Name

Janz Contagem e Gestão de Fluidos, SA

Address

Av. Infante D. Henrique nº 286 Lisboa

Postcode

1950-421

Country

Portugal

Phone

00351 21 831 6000

General Email

lbras@janz.pt

View All Listings by this Company

Octave range of water meters with blue epoxy coated cast iron or plastic bodies (see models). Maximum working pressure 16.0 Bar. Maximum operating temperature 50.0°C

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See models

Marking:

13905XXX & 13915XXX - Flow arrow on body. ARAD logo, DN, product information and model range on label under the plastic lid. 139XXXXX - Flow arrow and size on body. ARAD logo, product information and model range on label under the plastic lid.

Installation Requirements:

R001

Expiry date:

31/05/2029

Model:

OCTAVE range: 13905XXX (Composite Body, 2" BSP (M)) 13915XXX (Composite Body, 2.1/4" BSP (M)) 139XXXXX (Iron Body, 2” to 12”) 13905 & 13915: Where the XXX denotes customer specifications, e.g. flow rate, ration, packaging or logistic specifications. 139XXXXX: Where the 1st X denotes the size, and can be replaced with any of the following: 1 = 2” Flanged, 2 = 2.1/2” Flanged, 3 = 3” Flanged, 4 = 4” Flanged, 5 = 6” Flanged, 6 = 8” Flanged, 7 = 10” Flanged, 8 = 12” Flanged, Where the 2nd X denotes body type and customer specific and can be replaced with any of the following: 5 = Composite body, All other numbers = Customer specific Where the 3rd, 4th and 5th X’s denotes customer specifications, e.g. flow rate, ration, packaging or logistic specifications.

Product Images

Approval Holder:

Arad GROUP Ltd.

Company Name

Arad GROUP Ltd.

Address

Kibbutz Dalia 1923900 Kibutzz Dalia

Country

Israel

Phone

+972-4-9897906

General Email

Dars@arad.co.il

View All Listings by this Company

Manufacturer:

Arad GROUP Ltd.

Company Name

Arad GROUP Ltd.

Address

Kibbutz Dalia 1923900 Kibutzz Dalia

Country

Israel

Phone

+972-4-9897906

General Email

Dars@arad.co.il

View All Listings by this Company

‘Helvatron H2O’ range of ultrasonic water meters with brass bodies and EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:

1505 Water Meters

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

See model.

Marking:

Helvatron on cap. Helvatron and product info on meter face. Size and flow arrow on body.

Installation Requirements:

R001

Expiry date:

31/05/2029

Model:

Helvatron H2O range: H2O DN15 (port lengths 115 & 165mm): ¾” BSP (M) inlet/outlet, H2O DN20 (port lengths 130, 190 & 195mm): 1” BSP (M) inlet/outlet, H2O DN25 (port lengths 225 & 260mm): 1¼” BSP (M) inlet/outlet, H2O DN32 (port lengths 230 & 260mm): 1½” BSP (M) inlet/outlet, H2O DN40 (port lengths 245 & 300mm): 2” BSP (M) inlet/outlet.

Product Images

Approval Holder:

Helvatron AG

Company Name

Helvatron AG

Address

JOCHLERWEG 2 CH-6340 BAAR SWITZERLAND

View All Listings by this Company

Range of concealed, wall mounted rough insets, incorporating cross-top and single lever operating members. Maximum working pressure 3.5 bar. Maximum operating temperature 60°C

Section:

1535 Miscellaneous

Section Subtitle:

Tap accessories.

WRAS Approval Number:

240504014

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

¾” BSP (F)

Marking:

THG stamped on body

Installation Requirements:

R001 R010 R040

Expiry date:

31/05/2029

Model:

40AC/W & 40AM/W

Product Images

Approval Holder:

THG Paris

Company Name

THG Paris

Address

35 rue Tournière Béthencourt sur Mer

Postcode

80130

Country

France

Phone

+33 3.22.60.20.80

General Email

cvallee@thg.fr

View All Listings by this Company

Manufacturer:

THG Paris

Company Name

THG Paris

Address

35 rue Tournière Béthencourt sur Mer

Postcode

80130

Country

France

Phone

+33 3.22.60.20.80

General Email

cvallee@thg.fr

View All Listings by this Company

Spray handset for personal hygiene (brass bodied - various finishes) incorporating a trigger mechanism controlling the flow. The handset also has a locking ring. The inlet incorporates an approved check valve cartridge with an integral plastic flow regulator; however, the complete product has not been fully tested to demonstrate it provides backflow protection. The products are supplied with a shower hose. Model (5840/MBG/W) is supplied with a single lever trim set. Maximum working pressure 3.5 bar. Maximum operating temperature 60°C

Section:

1535 Miscellaneous

Section Subtitle:

Tap accessories.

WRAS Approval Number:

240504017

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

THG laser etched on wall mounted bracket

Installation Requirements:

R001 R070 R415

Expiry date:

31/05/2029

Model:

5840/9/W & 5840/MBG/W

Product Images

Approval Holder:

THG Paris

Company Name

THG Paris

Address

35 rue Tournière Béthencourt sur Mer

Postcode

80130

Country

France

Phone

+33 3.22.60.20.80

General Email

cvallee@thg.fr

View All Listings by this Company

Spray handset for personal hygiene (brass bodied - various finishes) incorporating a trigger mechanism controlling the flow. The handset also has a locking ring. The inlet incorporates an approved check valve cartridge with an integral plastic flow regulator; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 3.5 bar. Maximum operating temperature 60°C.

Section:

1535 Miscellaneous

Section Subtitle:

Tap accessories.

WRAS Approval Number:

240504018

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

THG etched on Body

Installation Requirements:

R001 R070 R415

Expiry date:

31/05/2029

Model:

G00-XXX-4270B/W. Where XXX denotes finishes and can be replaced by: A02-Polished Chrome, A13-Smoked Brass, B01-Polished Nickel, C01-Matte Nickel, C02-Matte Chrome, C27-Unlacquered Brass, C47-Smoked Nickel, D01-Light Bronze Lacquered, D05-Lacquered Matte Bronze, D10-USA Oil-Rubbed Bronze, D12-Polished Brass Lacquered, D15-Polished Black Lacquered, D16-White Lacquered, D18-Matte Black lacquered, D21-Old Oil-Rubbed Bronze, D24-Aranja, H17-Matt Aranja, F01-Polished Gold, F07-Matte Gold, F18-Rhodium Silver, F19-Matt Rhodium Silver, F27-Rose Gold, F30-Soft Gold, F31-Matte Soft Gold, F33-Brown Bronze PVD, F34-Matte Brown Bronze PVD, G01-Polished Nickel/Polished Gold, G02-Polished Chrome/Polished Gold, H03-Lacquered Antique Silver, H07-Varnished Matte Antique Red Copper, H08-Lacquered Matte Antique Silver, H24-Lacquered Antique Copper, H28-Antique Nickel, H49-Brass PVD, H50-Matte Brass PVD, H52-Gold PVD, H53-Matte Gold PVD, H55-Nickel PVD, H56-Matte Nickel PVD, H60-Matte Blush PVD, H62-Blush PVD, H64-Graphite PVD, H65-Matte Graphite PVD, H66-Umber PVD, H67-Matte Umber PVD

Product Images

Approval Holder:

THG Paris

Company Name

THG Paris

Address

35 rue Tournière Béthencourt sur Mer

Postcode

80130

Country

France

Phone

+33 3.22.60.20.80

General Email

cvallee@thg.fr

View All Listings by this Company

Range of shower outlets with plastic bodies (various finishes). Model 100184782 has flow regulator at the inlet and a shower arm. Maximum working pressure: open outlet. Maximum operating temperature: 70°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

240404029

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

Backplate etched with Porcelanosa and bottom of handsets etched with NK Porcelanosa.

Installation Requirements:

R001 R040

Expiry date:

30/04/2029

Model:

100184782 - TONO SHOWERHEAD 400MM CHROME, 100038634 - COTA HANDSHOWER CHROME, 100213273 COTA HANDSHOWER CHROME BLACK.

Product Images

Approval Holder:

Noken Design S.A.U

Company Name

Noken Design S.A.U

Address

CV-20 Km2 VILA-REAL CASTELLON

Postcode

12540

Country

Spain

General Email

certificaciones@noken.com

View All Listings by this Company

Manufacturer:

Noken Design S.A.U

Company Name

Noken Design S.A.U

Address

CV-20 Km2 VILA-REAL CASTELLON

Postcode

12540

Country

Spain

General Email

certificaciones@noken.com

View All Listings by this Company

Range of overhead shower outlets with chromium plated brass bodies. For installation with specific rough kit sets, incorporating stainless steel strainers and flow regulators in the inlet. Maximum operating temperature 80.0°C For open outlet use

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

240502006

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F).

Marking:

Dornbracht on shower head.

Installation Requirements:

R001 R010 R040

Expiry date:

31/05/2029

Model:

Rain shower 28031970, 28032970, 28033970, 28034970, 28041980, 28042980, 28043980, 28044980. Concealed rough kits 3503397090, 3503497090, 3504197090, 3504297090, 3504397090, 3504497090.

Product Images

Approval Holder:

Dornbracht GmbH & Co. KG.

Company Name

Dornbracht GmbH & Co. KG.

Address

Koebbingser Muehle 6 Iserlohn

Postcode

D-58640

Country

Germany

Phone

+49 2371 433 0

General Email

wpape@dornbracht.com

View All Listings by this Company

Range of shower handsets and shower kits. Shower kits 2.1703.391, 2.1703.015 & 2.1703.016 incorporate a shower handset, shower hose and riser rail. Shower handset inlets incorporate a flow regulator. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

240504003

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½ BSP (M).

Marking:

Mira on body.

Installation Requirements:

R001

Expiry date:

31/05/2029

Model:

1.1605.237 Mira Beat 110 Multi Mode Handset Chrome (Module No: 1740.065) 1.1605.238 Mira Beat 110 Multi Mode Handset White (Module No: 1740.066) 2.1703.009 Mira Beat 90 Single Mode White (Module No: 1703.452) 2.1703.011 Mira Beat 90 Single Mode Chrome (Module No: 1703.460) 2.1703.010 Mira Beat 90 Multi Mode White (Module No: 1703.251) 2.1703.012 Mira Beat 90 Multi Mode Chrome (Module No: 1703.250) 2.1703.015 Mira Beat 90 Fittings Kit White/Chrome 2.1703.016 Mira Beat 90 Fittings Kit Chrome 2.1703.391 Mira Beat 90 Bath Shower Fittings Kit (Chrome) 2.1831.003 Mira Beat 90 Eco Multi Mode Handset Chrome (Module No: 1831.001) Model added October 2023: 39178W-CP Mira Beat 90 Single Mode Chrome Model added November 2023: (39187W) Mira Beat 90 Fittings Kit Chrome Model added May 2024: 1329590 Mira Beat Multi Mode High Flow Handset (Chrome).

Product Images

Approval Holder:

Kohler Mira Ltd.

Company Name

Kohler Mira Ltd.

Address

Cromwell Road Cheltenham Gloucestershire

Postcode

GL52 5EP

Country

United Kingdom

Phone

07425 645619

General Email

jon.barfield@mirashowers.com

View All Listings by this Company

Range of shower outlets with chrome plated brass bodies incorporating a single check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. Model 28450410 is a wall elbow for use with the shower sets and incorporates a check valve cartridge, however the complete product has not been fully tested to demonstrate it provides backflow protection. Open outlet use only. Maximum operating temperature: 60.0°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

240502026

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M).

Marking:

Shower outlets: Dornbracht logo on centre of showerhead. Wall elbow: Dornbracht logo on backplate.

Installation Requirements:

R001 R040

Expiry date:

31/05/2029

Model:

27803361, 27803371, 28002970, 28450410, 28450370.

Product Images

Approval Holder:

Dornbracht GmbH & Co. KG.

Company Name

Dornbracht GmbH & Co. KG.

Address

Koebbingser Muehle 6 Iserlohn

Postcode

D-58640

Country

Germany

Phone

+49 2371 433 0

General Email

wpape@dornbracht.com

View All Listings by this Company

Manufacturer:

Dornbracht GmbH & Co. KG.

Company Name

Dornbracht GmbH & Co. KG.

Address

Koebbingser Muehle 6 Iserlohn

Postcode

D-58640

Country

Germany

Phone

+49 2371 433 0

General Email

wpape@dornbracht.com

View All Listings by this Company