Cla-Val UK Ltd. Approvals


WRAS Approval Number: 1712050

Range of automatic air venting valves with stainless steel bodies. Maximum operating pressure (2511 models) 25.0 bar & (1601 models) 16.0 bar. Cold water use only.

  • Section: 1980 Valves
  • Section Subtitle: Air venting. Fittings in this section are suitable for above ground installations only.
  • WRAS Approval Number: 1712050
  • Expiry date: 31/12/2022
  • Marking: Vent o mat, model and pressure on data plate on body.
  • Installation Requirements R001
  • Model
    RBX Series – BSP/NPT: 025RBX2511CS4 (DN25) - 1” BSP/NPT (M) Inlet & 050RBX2511CS4 (DN50) - 1½” BSP/NPT (M) Inlet. RBX Series – Flanged: 080RBX1601 - DN80, 100RBX1601 - DN100, 150RBX1601 - DN150 & 200RBX1601 - DN200. RBXB Series: 025RBXb2511CS4 (DN25) - 1” BSP/NPT (M) Inlet & 050RBXb2511CS4 (DN50) - 1½” BSP/NPT (M) Inlet/Outlet. RBXB Series: 025RBXB2511CS4TO (DN25) - 1” BSP/NPT (M) Inlet/Outlet. 050RBXB2511CS4TO (DN50) - 1½” BSP/NPT (M) Inlet/Outlet.
  • Factor: Cla-Val UK Ltd.
    Company Name
    Cla-Val UK Ltd.
    Address
    Dainton House Goods Station Road Tunbridge Wells
    Postcode
    TN1 2DH
    View All Listings by this Company
  • Manufacturer: Dynamic Fluid Control (Pty) LTD. (Vent-O-Mat)
    Company Name
    Dynamic Fluid Control (Pty) LTD. (Vent-O-Mat)
    Address
    32 Lincoln Road Industrial Sites Benoni South
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1809056

AQUA range of in line H-strainers with flanged, epoxy coated ductile iron bodies and stainless steel mesh and EPDM O-rings. Maximum working pressure 16.0 bar. Maximum operating temperature 65°C.

  • Section: 1715 Strainers
  • WRAS Approval Number: 1809056
  • Expiry date: 30/09/2023
  • Size: DN40 - 800
  • Marking: Flow arrow, size and PN rating on valve body Cla Val, model, size and PN rating on metal data plate on flange connection
  • Installation Requirements R001 r120
  • Model
    AQUA 90-501
  • Factor: Cla-Val UK Ltd.
    Company Name
    Cla-Val UK Ltd.
    Address
    Dainton House Goods Station Road Tunbridge Wells
    Postcode
    TN1 2DH
    View All Listings by this Company
  • Manufacturer: Cla-Val Europe
    Company Name
    Cla-Val Europe
    Address
    CH-1032 Romanel-sur-Lausanne Switzerland
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1810067

Range of pilot operated pressure reducing valves with epoxy coated ductile iron body (either blue or red/brown), EPDM ‘O’-rings and diaphragm. The valve has an adjustable pressure reducing facility controlled via a pilot valve, with auxiliary components including stainless steel tubing and fittings, nickel plated brass spherical valves and a ‘Y’-pattern strainer (stainless steel bodied on Tytan models, bronze bodied on all other models). DN600-DN1400 sizes also incorporate a needle valve, a swing gate valve and a union with incorporated restriction. Maximum inlet supply pressure 16.0 bar. Outlet pressure setting is adjustable in the range of 1.4 – 7.2 bar. Maximum operating temperature 65°C.

  • Section: 2165 Valves
  • Section Subtitle: Flow control, pilot operated control.
  • WRAS Approval Number: 1810067
  • Expiry date: 31/10/2023
  • Size: DN40 - DN1400 (see model section).
  • Marking: Cla Val, body type (NGE, TYTAN), flow arrow (sizes up to and including DN600), PN and size on body. All models have Cla Val, model, flow arrow, PN and size on a metal data plate on flange connection.
  • Installation Requirements R001 R120
  • Model
    Reduced port valves: NG1E-90-01 KCOS 50mm – 600mm NG1E-90-701 KCOS 600mm – 1400mm Note: Any model above 600mm is referred to as a TYTAN NG1E-90-701 TYTAN S KCOS 600mm – 800mm NG1E-90-701 TYTAN M KCOS 900mm – 1000mm NG1E-90-701 TYTAN L KCOS 1200mm – 1400mm Full port valve: 90-G1E-01 KCOS 40mm - 400mm. Suffix codes denote: ‘K’ = Generic prefix for any subsequent letters - standard for all water duty valves. C’ = Internally and Externally epoxy coated - standard for all water duty valves. ‘O’ = Stainless steel studs and washers for the main valve -standard for all water duty valves. ‘S’ = Stainless steel seat and Disc guides - standard for all water duty valves.
  • Factor: Cla-Val UK Ltd.
    Company Name
    Cla-Val UK Ltd.
    Address
    Dainton House Goods Station Road Tunbridge Wells
    Postcode
    TN1 2DH
    View All Listings by this Company
  • Manufacturer: Cla-Val Europe
    Company Name
    Cla-Val Europe
    Address
    CH-1032 Romanel-sur-Lausanne Switzerland
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1810075

Range of pilot operated flow control valves with blue or red epoxy coated Ductile Iron bodies, having a flow control facility which is operated via a differential pressure flow control pilot valve. Auxiliary components include stainless steel tube and fittings, spherical valves, y-pattern strainers and needle valve. Maximum working pressure 16.0 bar. Maximum operating temperature 65°C.

  • Section: 2165 Valves
  • Section Subtitle: Flow control, pilot operated control.
  • WRAS Approval Number: 1810075
  • Expiry date: 31/10/2023
  • Size: See model
  • Marking: Cla Val, body type, flow arrow (sizes up to and including DN600) PN and size on body. All models have Cla Val, model, flow arrow, PN and size on a metal data plate on flange connection.
  • Installation Requirements R001 R120
  • Model
    NG1E-40-01 KCOS - DN50-DN600 & 40-G1E-01 KCOS - DN40-DN400. Suffix codes denote: ‘K’ = Generic prefix for any subsequent letters - standard for all water duty valves ‘C’ = Internally and Externally epoxy coated - standard for all water duty valves ‘O’ = Stainless steel studs and washers for the main valve -standard for all water duty valves ‘S’ = Stainless steel seat and Disc guides - standard for all water duty valves
  • Factor: Cla-Val UK Ltd.
    Company Name
    Cla-Val UK Ltd.
    Address
    Dainton House Goods Station Road Tunbridge Wells
    Postcode
    TN1 2DH
    View All Listings by this Company
  • Manufacturer: Cla-Val Europe
    Company Name
    Cla-Val Europe
    Address
    CH-1032 Romanel-sur-Lausanne Switzerland
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1811037

Range of pressure relief/sustaining valves with red or blue epoxy coated ductile iron bodies having adjustable pressure relief/sustaining facility controlled via a pilot valve, with auxiliary components including stainless steel tubing, ball valves, needle valve and a strainer. All valves above DN600 are fitted with a manual operator. This is an optional extra for models up to DN600. Maximum working pressure 16.0 bar. Maximum outlet pressure in the range of 1.4 - 14.0 bar. Maximum operating temperature 65°C.

  • Section: 2215 Valves
  • Section Subtitle: Pressure relief, pilot operated.
  • WRAS Approval Number: 1811037
  • Expiry date: 30/11/2023
  • Size: See model
  • Marking: Cla-Val, body type, flow arrow (sizes up to and including DN600) PN and size on body. Cla Val, model, flow arrow, PN and size on a metal data plate on flange connection.
  • Installation Requirements R001 R120
  • Model
    NG1E-50-01KCOS: 50mm-600mm, NG1E-50-701 range consisting of models: TYTAN S - 600mm-800mm, TYTAN M - 900mm-1000mm & TYTAN L - 1200mm-1400mm. 50-G1E-01KCOS Full port valve 40mm – 400mm Description of suffix codes Where: - ‘K’ = Generic prefix for any subsequent letters - standard for all water duty valves ‘C’ = Internally and Externally epoxy coated - standard for all water duty valves ‘O’ = Stainless steel studs and washers for the main valve -standard for all water duty valves ‘S’ = Stainless steel seat and Disc guides - standard for all water duty valves
  • Factor: Cla-Val UK Ltd.
    Company Name
    Cla-Val UK Ltd.
    Address
    Dainton House Goods Station Road Tunbridge Wells
    Postcode
    TN1 2DH
    View All Listings by this Company
  • Manufacturer: Cla-Val Europe
    Company Name
    Cla-Val Europe
    Address
    CH-1032 Romanel-sur-Lausanne Switzerland
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1901051

Range of air venting valves with stainless steel bodies and springs. Maximum working pressures varies by model: B70-526 models = 10.0 bar; 70-516 models (DN25 – DN150) = 25.0 bar; and 70-516 model (DN200) = 16.0 bar. Maximum operating temperature 80°C.

  • Section: 1980 Valves
  • Section Subtitle: Air venting. Fittings in this section are suitable for above ground installations only.
  • WRAS Approval Number: 1901051
  • Expiry date: 31/01/2024
  • Size: ½” & 1” BSP (M) inlet and outlet (B70-526 models). 1” & 2” BSP (M) inlet, DN80, DN100, DN150 & DN200 flanged (70-516 models)
  • Marking: CLA-VAL logo, size, pressure rating and technical information on tag on body.
  • Installation Requirements R001
  • Model
    Cla-Val Type AQUA B70-526 & 70-516 ranges. As of September 2019 the type AQUA models can also be known as: Cla-Val Type Vent-A-Riser DN15 Cla-Val Type Vent-A-Riser DN25
  • Factor: Cla-Val UK Ltd.
    Company Name
    Cla-Val UK Ltd.
    Address
    Dainton House Goods Station Road Tunbridge Wells
    Postcode
    TN1 2DH
    View All Listings by this Company
  • Manufacturer: Infinite Flow Solutions (PTY) Ltd.
    Company Name
    Infinite Flow Solutions (PTY) Ltd.
    Address
    222 14th Avenue Anderbolt Boksburg North
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1903070

Range of manually operated flow control valves with an epoxy coated ductile iron body (either blue or red/brown), EPDM ‘O’-rings and diaphragm. The valves are fitted with a manual operator incorporating stainless steel tubing/fittings and three nickel plated brass spherical valves with stainless steel ball. Maximum working pressure 16.0 Bar. Maximum working temperature 65°C.

  • Section: 2170 Valves
  • Section Subtitle: Flow control, manually operated.
  • WRAS Approval Number: 1903070
  • Expiry date: 31/03/2024
  • Size: DN40 - DN1400 (see model section).
  • Marking: Cla-Val, flow arrow, PN rating and material on body. Cla Val, model, flow arrow, PN and size on a metal data plate on flange connection.
  • Installation Requirements R001 R120
  • Model
    Reduced port valves: NG1E-100-01 /KCOS 50mm – 600mm NG1E-100-701 /KCOS 600mm – 1400mm Note: Any model above 600mm is referred to as a TYTAN NG1E-100-701 TYTAN S KCOS 600mm – 800mm NG1E-100-701 TYTAN M KCOS 900mm – 1000mm NG1E-100-701 TYTAN L KCOS 1200mm – 1400mm Full port valve: 100-G1E-01 KCOS 40mm - 400mm. Suffix codes denote: ‘K’ = Generic prefix for any subsequent letters - standard for all water duty valves. C’ = Internally and Externally epoxy coated - standard for all water duty valves. ‘O’ = Stainless steel studs and washers for the main valve -standard for all water duty valves. ‘S’ = Stainless steel seat and Disc guides - standard for all water duty valves.
  • Factor: Cla-Val UK Ltd.
    Company Name
    Cla-Val UK Ltd.
    Address
    Dainton House Goods Station Road Tunbridge Wells
    Postcode
    TN1 2DH
    View All Listings by this Company
  • Manufacturer: Cla-Val Europe
    Company Name
    Cla-Val Europe
    Address
    CH-1032 Romanel-sur-Lausanne Switzerland
    View All Listings by this Company

Print This Approval


WRAS Approval Number: 1903071

Range of pilot operated flow control valves with epoxy coated ductile iron body, EPDM ‘O’-rings and diaphragm. The valve has an adjustable flow control facility controlled via an electronic motorised pilot valve (bronze or stainless steel bodied), with auxiliary components including stainless steel tubing/fittings, nickel plated brass spherical valves with stainless steel ball and either a bronze or stainless steel bodied strainer. Maximum working pressure 16.0 bar. Maximum operating temperature 65°C.

  • Section: 2347 Valves
  • Section Subtitle: Special combination assemblies, pilot operated control.
  • WRAS Approval Number: 1903071
  • Expiry date: 31/03/2024
  • Size: DN40 - DN1400 (see model section).
  • Marking: Cla-Val, flow arrow, PN rating and material on body. Cla Val, model, flow arrow, PN and size on a metal data plate on flange connection.
  • Installation Requirements R001 R120
  • Model
    Reduced port valves: NG1E-138-L21 KCOS 50mm – 600mm NG1E-138-L721 KCOS 600mm – 1400mm Note: Any model above 600mm is referred to as a TYTAN NG1E-138-L721 TYTAN S KCOS 600mm – 800mm NG1E-138-L721 TYTAN M KCOS 900mm – 1000mm NG1E-138-L721 TYTAN L KCOS 1200mm – 1400mm Full port valve: 138-G1E-L21 KCOS 40mm - 400mm. All valves above 600mm are fitted with a manual operator, below this size it is an optional extra. Suffix codes denote: ‘K’ = Generic prefix for any subsequent letters - standard for all water duty valves. C’ = Internally and Externally epoxy coated - standard for all water duty valves. ‘O’ = Stainless steel studs and washers for the main valve -standard for all water duty valves. ‘S’ = Stainless steel seat and Disc guides - standard for all water duty valves.
  • Factor: Cla-Val UK Ltd.
    Company Name
    Cla-Val UK Ltd.
    Address
    Dainton House Goods Station Road Tunbridge Wells
    Postcode
    TN1 2DH
    View All Listings by this Company
  • Manufacturer: Cla-Val Europe
    Company Name
    Cla-Val Europe
    Address
    CH-1032 Romanel-sur-Lausanne Switzerland
    View All Listings by this Company

Print This Approval


Show Per Page
5102050Show All

Back To Directory Sections

Page of 1