Range of water meter manifolds with gun metal bodies and ball valve with either a quarter turn stop valve or screw down stop valve. The products incorporate an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1510 Water Meter Manifolds

WRAS Approval Number:

2203314

Note:

R008 applies to te plastic cap

Size:

see model

Marking:

Ebco logo, flow arrow, Foundry I.D. (QL) & date of manufacturer (MM/YY) on body.

Installation Requirements:

R001 R008

Expiry date:

31/03/2027

Model:

1" BSP (M) x ¾” BSP (F) models: MB1030403BM MB1030403EM MANI0461V MANI0461VW MANI0461VMCP20 MVB0250MCP40 MVB0240 MVB0241 MVB0250 MVB0255 ¾ BSP (F) x ¾” BSP (F) models: MBB0460V MBB0470V MBB0461V MBB0481V MBB0040V MBB0060V MVB0210 MVB0200 MVB0220 ¾” BSP (M) x ¾” BSP (M) models: MVB0020 MVB0030 MVB0040 MVB0045 1" BSP (M) x 1” BSP (M) MVB0230

Approval Holder:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

Manufacturer:

Atlantic Plastics Ltd.

Company Name

Atlantic Plastics Ltd.

Address

Coytraherne Close, Brackla, Bridgend

Postcode

CF31 2AX

Country

United Kingdom

Phone

01656672628

General Email

rhodgkiss@atplas.co.uk

View All Listings by this Company

Range of pump inverters with plastic bodies, NBR rubber and EPDM rubber seals and ‘O’-rings. The products incorporate an inline resilient trim non-return valve. Maximum working pressure 13.0 bar. Cold water use only.

Section:

1530 Miscellaneous Fittings

Size:

1¼” BSP (M) inlet x 1½” BSP (F) outlet.

Marking:

DAB Water Technology on front casing. Manufacturer name, CE marking, date of manufacture (N.X.YYWW, where N.x = product revision index) and other technical information on adhesive label on side of casing.

Installation Requirements:

R001

Expiry date:

31/01/2027

Model:

Active driver plus M/T 1.0 Active driver plus M/T 2.2 Active driver plus T/T 3 Active driver plus T/T 5.5 Active driver plus M/M 1.1 Active driver plus M/M 1.8/DV Active driver plus M/M 1.5/DV Models are named “Active driver plus x/y z” or “Active driver plus x/y z/DV” Where: x indicates the configuration of the entry line, which can be monophase (“M”) or threephase (“T”), y indicates the configuration of the exit line, which can be monophase (“M”) or threephase (“T”), z indicates the maximum mechanical power of the pump’s motor and “DV” indicates dual voltage models (able to work at 115V or at 230V).

Approval Holder:

DAB PUMPS SPA

Company Name

DAB PUMPS SPA

Address

Via Marco Polo 14 Mestrino (PD)

Postcode

35035

Country

Italy

General Email

certifications@dwtgroup.com

View All Listings by this Company

Manufacturer:

DAB PUMPS SPA

Company Name

DAB PUMPS SPA

Address

Via Marco Polo 14 Mestrino (PD)

Postcode

35035

Country

Italy

General Email

certifications@dwtgroup.com

View All Listings by this Company

Range of spout outlets with brass bodies (various finishes) incorporating an aerator. Product is supplied with either a lever type pop up (HIRONDELLE models) or click type waste (ICON-X & CORVAIR models). Maximum working pressure 3.5 bar. Maximum operating temperature 60°C.

Section:

1535 Miscellaneous

Section Subtitle:

Tap accessories.

WRAS Approval Number:

2203307

Note:

No testing has been performed on the pop-up wastes

Size:

1 ¼” BSP (M) connector

Marking:

THG on spout

Installation Requirements:

R001 R006 R010

Expiry date:

31/03/2027

Model:

xxx.xxx.170/W – Rim mounted basin spout mixer with waste. First xxx: style . Second xxx: finish Styles HIRONDELLE: A4J Hirondelle cristal clair – A4K Hirondelle cristal clair décor platine - A4L Hirondelle cristal clair décor or ICON-X: U7G Icon-X / U7H Icon-X à manettes / U7J Icon-X, insert metal / U7K Icon-X à manettes, insert metal / U7L Icon-X, Titane / U7M Icon-X à manettes, Titane / U7N Icon-X, pierre à définir – U7P Icon-X à manettes, pierre à définir/ U7S - Icon-X , Carbone or / U7T Icon-X à manettes, Carbone or – CORVAIR: U8D Corvair / U8E Corvair à manettes / U8F Corvair marbre Howlite / U8G Corvair à manettes marbre Howlite / U8H Corvair marbre Portoro / U8J Corvair à manettes marbre Portoro / U8K Corvair marbre Fior di Bosco / U8L Corvair à manettes marbre Fior di Bosco / U8M Corvair pierre à définir / U8N Corvair à manettes pierre à définir Finish A01 – Brass polished, uncoated A02 – Polished Chrome B01 – Polished Nickel C01 – Matt Nickel C02 – Matt Chrome C03 – Satin Chrome C05 – Nickel satiné C47 – Nickel Fumé D01 – Varnished Clear Bronze D05 – Varnished Matt Bronze D13 – Carbon D24 – Black nickel (Aranja) F01 – Polished Gold F03 – Satin gold F07 – Matt gold F18 – Rhodium Silver F19 – Matt Rhodium Silver F27 – Rose Gold F30 – Soft gold F31 – Soft matt gold F32 – Soft satin gold F33 – Brown bronze F34 – Matt brown bronze color PVD H03 – Varnished Antique Silver H06 – Red copper matt, coated H07 – Matt Antique Red Copper H17 – Matt aranja H21 – Red copper polished, uncoated H24 – Varnished Antique Red Copper H27 – Bronze satin H28 – Antique nickel H30 – Antique matt sylver H49 – Brass color PVD H50 – Matt brass color PVD H52 – Gold color PVD H53 – Matt gold color PVD H55 – Nickel color PVD H56 – Matt nickel color PVD H58 – Brushed stainless steel color PVD H59 – Stainless steel color PVD H60 – Matt blush PVD H62 – Blush PVD H64 – Graphite PVD H65 – Matt graphite PVD H66 – Umber PVD H67 – Matt umber PVD

Approval Holder:

THG Paris

Company Name

THG Paris

Address

35 rue Tournière Béthencourt sur Mer

Postcode

80130

Country

France

Phone

+33 3.22.60.20.80

General Email

cvallee@thg.fr

View All Listings by this Company

Manufacturer:

THG Paris

Company Name

THG Paris

Address

35 rue Tournière Béthencourt sur Mer

Postcode

80130

Country

France

Phone

+33 3.22.60.20.80

General Email

cvallee@thg.fr

View All Listings by this Company

Circulation pump incorporating a plastic body and impellers. Maximum working pressure 15.0 bar. Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2205800

Size:

ZRS12 prefix models: ¾” BSP (M), ZRS15 prefix models: 1” BSP (M).

Marking:

Wilo, date of manufacture (YYWW) & flow arrow on data plate on body.

Installation Requirements:

R001

Expiry date:

31/05/2027

Model:

ZRS X1/X2-X3 KU X4 130 X5 Where: X1 = connection size: 12 = ¾” BSP (M), 15 = 1” BSP (M). X2 = motor power 2, 4, 5, 6 or 7 (head in mWC). X3 = speed number; 1, 2 or 3. KU = composite pump body. X4 = electrical connection: PL, PR, CLR, CLF, CRR, CRF, FSL, FSR. 130 = pump body dimension (height in mm). X5 = terminal box position: 12, 3, 6 or 9 o’clock. Example: ZRS15/4-3 KU PL 130 12.

Approval Holder:

WILO INTEC

Company Name

WILO INTEC

Address

50 Avenue Eugene Casella, Aubigny sur nere

Postcode

18700

Country

France

Phone

+332 48 81 62 62

General Email

franck.guillaume@wilo.com

View All Listings by this Company

Manufacturer:

WILO INTEC

Company Name

WILO INTEC

Address

50 Avenue Eugene Casella, Aubigny sur nere

Postcode

18700

Country

France

Phone

+332 48 81 62 62

General Email

franck.guillaume@wilo.com

View All Listings by this Company

Range of cold water in tank booster sets incorporating an ‘AG’ air gap, consisting of a GRP water storage cistern incorporating a float operated inlet valve, with a copper float and submersible pump or pumps (depending on model). The products incorporate an externally mounted stainless-steel manifold with servicing valve(s), expansion vessel, pressure gauge and a digital control panel. The pumps are connected to the external components via a discharge assembly of internal pipework including an in-line non-verifiable single check valve assembly (suitable for backflow prevention of Fluid Category 2). Maximum working pressure 10.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2111366

Note:

These cisterns are not suitable for water for domestic purposes unless they are so modified and installed as to comply in all respects with Schedule 2. Section 7, Paragraph 4, of the Water Supply (Water Fittings) Regulations 1999. The products incorporate a Fluid Category 3 air gap arrangement.

Size:

1" BSP (M)

Marking:

Fluid Water, Stuart Turner or Flowtech, address, product ref, capacity, job ref and contact information on adhesive label on tank body. Fluid Water or Stuart Turner, model, year of manufacturer and serial no on control box.

Installation Requirements:

R001 R280 R415

Expiry date:

30/11/2026

Proviso:

If implemented, the overflow and warning pipe discharge to drain must be via a type `AA` `AB` or `AD` airgap in accordance with EN 1717.

Model:

IT-A-V-B-C-D-E-F-G-AG Where: IT = Product range name (In Tank). A = Number of pumps (1,2, or 3 pumps). V = Variable speed. B = Maximum flow (l/min per pump - 80 or 120l/min). C = Maximum head (m per Pump, e.g. 60). D = Controller type (MAB). E = Power input (T = 3 Phase – M = 1Phase). F = Vessel Capacity (8 = 8 litre, 24= 24 litre). G = Tank size (Nominal capacity in litres - 250-3000). AG = ‘AG’ air gap. Example: IT-3V-8060-MAB-M/24-1000-AG In Tank booster set with 3 pumps, variable speed, 80l/min max. flow and 60m max. head, MAB controller, 1 phase, 24 litre expansion vessel, 1000 litre capacity with an AG air gap. Model added October 2025: IN - A - B - C - D - E - F IN = Product range name A = number of pumps (1,2, or 3 pumps) B = Maximum flow (per pump) C = Maximum Head (per pump) D = Tank capacity E = Voltage F = Controller Type Example: IN3-8060-1000-M-MAB • IN = product range • A = 3 pumps • B = 80 l/min max flow • C = 60m max head • D = 1000L nominal capacity • E – 1 phase 230v • F = MAB control panel

Approval Holder:

Dutypoint Ltd.

Company Name

Dutypoint Ltd.

Address

Unit A, Quedgeley West Business Park, Hardwicke, Gloucester

Postcode

GL2 4PA

Country

United Kingdom

Phone

01452313334

General Email

austin.hill@dutypoint.com

View All Listings by this Company

Range of cold water in tank booster sets incorporating an ‘AB’ air gap, consisting of a GRP water storage cistern incorporating a float operated inlet valve, with a copper float and submersible pump or pumps (depending on model). The products incorporate an externally mounted stainless-steel manifold with servicing valve(s), expansion vessel, pressure gauge and a digital control panel. The pumps are connected to the external components via a discharge assembly of internal pipework including an in-line non-verifiable single check valve assembly (suitable for backflow prevention of Fluid Category 2). Maximum working pressure 10.0 bar. Cold water use only.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2111367

Note:

These cisterns are not suitable for water for domestic purposes unless they are so modified and installed as to comply in all respects with Schedule 2. Section 7, Paragraph 4, of the Water Supply (Water Fittings) Regulations 1999. The products incorporate a Fluid Category 5 air gap arrangement.

Size:

1" BSP (M)

Marking:

Fluid Water or Stuart Turner, address, product ref, capacity, job ref and contact information on adhesive label on tank body. Fluid Water or Stuart Turner, model, year of manufacturer and serial no on control box.

Installation Requirements:

R001 R280 R415

Expiry date:

30/11/2026

Proviso:

If implemented, the warning pipe discharge to drain must be via a type `AA` `AB` or `AD` airgap in accordance with EN 1717.

Model:

IT-A-V-B-C-D-E-F-G-AB Where: IT = Product range name (In Tank). A = Number of pumps (1,2, or 3 pumps). V = Variable speed. B = Maximum flow (l/min per pump - 80 or 120l/min). C = Maximum head (m per Pump, e.g. 60). D = Controller type (MAB). E = Power input (T = 3 Phase – M = 1Phase). F = Vessel Capacity (8 = 8 litre, 24= 24 litre). G = Tank size (Nominal capacity in litres - 250-3000). AB = ‘AB’ air gap. Example: IT-3V-8060-MAB-M/24-1000-AB In Tank booster set with 3 pumps, variable speed, 80l/min max. flow and 60m max. head, MAB controller, 1 phase, 24 litre expansion vessel, 1000 litre capacity with an AB air gap.

Approval Holder:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Range of pumps with stainless steel bodies and plastic impellors. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2112057

Size:

1½” BSP (M) or 2” (M) inlet/outlet.

Marking:

Wilo SE, model and product info on data plate on body

Installation Requirements:

R001 R415

Expiry date:

31/12/2026

Model:

Para MAXO-Z 25-180-08. Para MAXO-Z 25-180-10. Para MAXO-Z 30-180-08. Para MAXO-Z 30-180-10.

Approval Holder:

Wilo SE

Company Name

Wilo SE

Address

Werk Hof, Heimgartenstr. 1-3, 95030 Hof/Saale

Country

Germany

View All Listings by this Company

Range of vertical multistage pumps with stainless-steel bodies, stainless-steel impellers, shaft and outer sleeve. Maximum working pressures: T (oval flange): 16.0 bar. V (Victaullic & grooved), C (clamp flanges) & F (round flange) versions: 26.0 bar. Maximum operating temperature 100°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2110066

Size:

EV1-EV3 & 1VR-3VR models - F (round flange) versions: DN25. EV6-EV20 & 6VR-20VR models - F (round flange) versions: DN32-50. EV1-EV20 & 1VR-20VR models - T (oval flange), V (Victaullic - EV; Grooved - VR), C (clamp flanges) & F (round flange) versions: DN32-50.

Marking:

Franklin Electric, model name, date of production (DD/MM/YYYY), pressure, temperature and other technical information on data plate on body.

Installation Requirements:

R001 R415

Expiry date:

31/10/2026

Model:

EV and VR ranges. Code example (EV range): EV 20 /15 A B C D E F G H J K L M N PMP/A. Where: EV = Pump model EV (EV = E-Tech “brand”). 20 = Rated flow [m³/h] (varies: 1-20). /15 = No. of stages/impellers. (See model and stages below for more detail). A = No. of trimmed impellers, if "Empty" = none. B = Flange type: "F" - round; "T" - oval; "V" - Victaulic; "C" - clamp. C = Materials: "I" - (AISI304/EN1.4301); "N" (AISI316/EN1.4401). D = Motor power (kW x 10). E = Frequency: "5" - 50Hz; "6" - 60Hz. F = No. of motor poles: "Empty" - 2 poles; "4" - 4 poles. G = Motor type: "Empty" - without motor, "T" - 3-phase; "M" - 1-phase. H = Mechanical Seal: "Empty" - standard version (EV1-EV20 & 1VR-20VR versions only). J = Type of mechanical Seal: E1 (SiC-Carbon Graphite-EPDM) or E2 (SiC-SiC-EPDM). K = "Empty" - standard version, "H" - high pressure. L = "Empty" - standard version, "P" - passivated. M = "Empty" - standard version N = "Empty" - no motor, “IE..” motor efficiency class. PMP/A = cold formed pump casing. Code example (VR range): 3 VR0700 A B C X-XXXX. Where: 3 = Rated flow [m³/h] (varies: 1-20). VR = Pump model (VR = FPS “brand”). 07 = No. of stages/impellers. (See model and stages below for more detail). 00 = Impeller trim: 00 = no trim, A1 = 1A (one trimmed impeller), A2 = 2A (two trimmed impellers). A = Materials: "H" - (AISI304/EN 1.4301); "N" (AISI316/EN 1.4401). B = Flange type: "F" - round; "T" - oval; "V" - Grooved (Victaullic); "C" - clamp. C = Mechanical Seal: “1” - QBE; “2” - QQE. X-XXXX = Combination of numbers and letter relating to frame, speed, motor and electronics (does not affect water pathways). Last two digits can be empty for versions without a motor. Minimum and maximum number of stages (please note the oval flange models have a lower maximum, this is included in brackets as follows [15] to denote 15 stages): EV1/1VR: stage from 2 to 37 [23] (50Hz) and from 2 to 25 [15] (60Hz); EV3/3VR: stage from 2 to 33 [21] (50Hz) and from 2 to 23 [14] (60Hz); EV6/6VR: stage from 2 to 36 [21] (50Hz) and from 2 to 23 [14] (60Hz); EV10/10VR: stage from 2 to 24 [15] (50Hz) and from 2 to 17 [10] (60Hz); EV15/15VR: stage from 1 to 17 [10] (50Hz) and from 1 to 12 [10] (60Hz); EV20/20VR: stage from 1 to 17 [10] (50Hz) and from 1 to 10 [7] (60Hz).

Approval Holder:

Franklin Electric SRL

Company Name

Franklin Electric SRL

Address

Via Asolo 7 Dueville Vicenza 36031

Country

Italy

Phone

+39 0444 360366

General Email

info.it@fele.com

View All Listings by this Company

Range of multistage pumps with brass suction and discharge bodies, stainless steel housing, shaft and impeller, and EPDM ‘O’-rings and seals. Maximum working pressure: 6.0 bar (41491 & 41492 models) or 9.0 bar (41493 & 41494 models). Maximum operating temperature 65°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

2203051

Size:

1¼” BSP (F) inlet x 1" BSP (F) outlet

Marking:

STUART TURNER, model number, maximum pressure and temperature and other technical information on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

31/03/2027

Model:

41491 - Multistage Pump 30, 41492 - Multistage Pump 40, 41493 - Multistage Pump 50, 41494 - Multistage Pump 60.

Approval Holder:

Stuart Turner Ltd

Company Name

Stuart Turner Ltd

Address

47 Market Place Henley-on-Thames Oxfordshire

Postcode

RG9 2AD

Country

United Kingdom

Phone

01491 572655

General Email

stuart.savill@stuart-turner.co.uk

View All Listings by this Company

Manufacturer:

Fujian Fuan Wendy Electrical Machinery Co Ltd

Company Name

Fujian Fuan Wendy Electrical Machinery Co Ltd

Address

Qinxiyang Industrial Zone Fuan Fujian

Country

China

General Email

View All Listings by this Company

Range of shower handsets plastic bodies (various finishes) and EPDM ‘O’-rings. All models include a button on the shower face which alters the spray pattern. The product incorporates either a plastic strainer (26 050 & 26 530) or a stainless-steel strainer and a plastic flow regulator (26 051 & 26 531) on the inlet. Maximum operating temperature 60°C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

2111049

Note:

Open outlet use only.

Size:

½” BSP male

Marking:

26 050 xxx- AXOR on body (26 050 xxx only) Hansgrohe on handle (all other models)

Installation Requirements:

R001 R040

Expiry date:

30/11/2026

Model:

26 530 xxx 26 530 400 26 531 xxx 26 531 400 26 050 xxx 26 051 xxx Where xxx denotes the surface finish (which is a non-water contact part). It will always be 3 digits, which can be any combination of numbers and/or letters, as examples: 000 = chrome optic finish, 800 = PVD stainless steel optic finish.

Approval Holder:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company

Manufacturer:

Hansgrohe SE

Company Name

Hansgrohe SE

Address

Auestrasse 5 - 9, Schiltach

Postcode

77761

Country

Germany

Phone

+49 170 4471 718

General Email

Ludovic.hauer@hansgrohe.com

View All Listings by this Company