Single hole, single outlet (swivel) combination tap assembly (chromium plated brass), incorporating a ceramic cartridge headwork with a single lever operating member. The spout outlet can incorporate either a plastic flow straightener or a plastic aerator. When supplied with a plastic flow straightener there is a combined EPDM washer and stainless steel strainer behind it. Maximum working pressure 10.0 bar. Maximum operating temperature 70°C.

Section:

0470 Combination Tap Assemblies

Section Subtitle:

Single hole tap(s) with a single outlet and a swivel spout.

WRAS Approval Number:

2110802

Size:

Stainless steel braided EPDM lined flexible hose assemblies with ½” captive nut end connections.

Marking:

PPI on rear of body.

Installation Requirements:

R001 R006 R010

Expiry date:

31/10/2026

Model:

M9604 Models added September 2022 M9604 MBK1 M9604 BGP

Approval Holder:

PPI Xiamen Industry Co., Ltd.

Company Name

PPI Xiamen Industry Co., Ltd.

Address

No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen

Postcode

361022

Country

China

General Email

heatheryang@xmppi.com

View All Listings by this Company

Manufacturer:

PPI Xiamen Industry Co., Ltd.

Company Name

PPI Xiamen Industry Co., Ltd.

Address

No 88 South Houxiang Road Xinyang Industrial Zone Haicang District Xiamen

Postcode

361022

Country

China

General Email

heatheryang@xmppi.com

View All Listings by this Company

Two hole, single outlet fixed combination tap assembly (chrome plated brass) incorporating a ceramic cartridge headwork and a single lever operating member. The tap body and spout oulet are connected via a stainless steel braided EPDM lined flexible hose. The spout outlet incorporates a plastic aerator. Maximum working pressure 5.0 bar. Maximum operating temperature 60°C.

Section:

0510 Combination Tap Assemblies

Section Subtitle:

Two hole tap(s) with a single outlet and a fixed spout.

WRAS Approval Number:

2012912

Size:

Stainless steel braided EPDM lined flexible hose assemblies with 22mm compression end connections.

Marking:

Bristan on body

Installation Requirements:

R001 R010 R006

Expiry date:

31/12/2025

Model:

ALP 2HBF C

Product Images

Approval Holder:

Bristan Group Ltd.

Company Name

Bristan Group Ltd.

Address

Birch Coppice Business Park Dorden Tamworth

Postcode

B78 1SG

Country

Staffs

Phone

01827 254144

General Email

hmistry@bristan.com

View All Listings by this Company

‘HydroDOS’ chlorine dioxide dosing system with PVC-u pipework and EPDM ‘O’-rings. The product incorporates a water meter, strainer, isolation valves and a drain cock with hose spigot. Maximum working pressure 6.0 bar. Cold water use only.

Section:

0970 Dosing Equipment

Section Subtitle:

Fittings in this section have been judged only against the requirements of The Water Supply (Water Fittings) Regulations 1999 (England and Wales), The Water Supply (Water Fittings) (Scotland) Byelaws 2014 or The Water Supply (Water Fittings) Regulations (Northern Ireland) 2009. The decision of the Scheme to list them is not to be taken as any guide as to their effectiveness to do the job for which they have been designed

WRAS Approval Number:

2011085

Size:

1” BSP (M) inlet/outlet

Marking:

Hydrodos, WRAS, model number and serial number on adhesive label inside unit

Installation Requirements:

R001 R120 R160 R170 R415 R511 R575

Expiry date:

30/11/2025

Model:

HydroDOS HD550G

Approval Holder:

Hydrotec International Water Treatment Limited

Company Name

Hydrotec International Water Treatment Limited

Address

38 Main Street Swords Country Dublin

Country

Ireland

View All Listings by this Company

Filling loop assembly, consisting of a stainless steel braided EPDM lined flexible hose, a lever operated brass spherical valve and a DZR brass double check valve assembly that incorporates a lever operated spherical valve. Maximum working pressure 10.0 bar. Maximum operating temperature 23°C.

Section:

1015 Filling Loop

Size:

15mm compression

Marking:

Caleffi logo, CR, and flow arrow on mould on double check valve assembly body Caleffi logo mould on isolation valve body

Installation Requirements:

R001

Expiry date:

31/12/2025

Model:

300600 300600 CST

Product Images

Approval Holder:

Caleffi S.p.A

Company Name

Caleffi S.p.A

Address

Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)

Postcode

28010

Country

Italy

Phone

+39 0322 8491

General Email

gary.perry@caleffi.com

View All Listings by this Company

Manufacturer:

Caleffi S.p.A

Company Name

Caleffi S.p.A

Address

Strada Regionale 229 n. 25 Fontaneto d'Agogna (NO)

Postcode

28010

Country

Italy

Phone

+39 0322 8491

General Email

gary.perry@caleffi.com

View All Listings by this Company

‘Purity’ range of plastic filter heads with EPDM ‘O’-rings. Maximum working pressure 8.6 bar. Cold water use only.

Section:

1050 Filters and Housings

Size:

See model

Marking:

Brita, PN, model, product information and contact details on adhesive label on body.

Installation Requirements:

R001 R120 R150 R170

Expiry date:

31/10/2025

Model:

Purity C IQ: ⅜” BSP (M) Purity C IQ: 8mm push fit connection

Product Images

Approval Holder:

Brita GmbH

Company Name

Brita GmbH

Address

Heinrich Hertz Strasse 4 D-65232 Taunusstein

Country

Germany

Phone

+49 6128 746 0

General Email

info@brita.net

View All Listings by this Company

Range of complete water filter heads and compatible filter cartirdges with plastic bodies and EPDM ‘O’-rings. The FX filters are carbon block based and the VH-IEN filters use an ion exchange resin. Maximum working pressure 8.6 bar. Cold water use only.

Section:

1050 Filters and Housings

WRAS Approval Number:

2012361

Note:

Please note that the product is marked with ‘38°C’ which the manufacturer states is the ambient air temperature and not water temperature. The WRAS Approval is for cold water use only.

Size:

10mm push fit (to filter head).

Marking:

Microfilter logo and technical information on adhesive label on body.

Installation Requirements:

R001 R008 R120 R150 R170

Expiry date:

31/12/2025

Model:

FX10, FX15 & FX17. VH-IEN 1500, VH-IEN 3000, VH-IEN 6000 & VH-IEN 9000

Product Images

Approval Holder:

Microfilter Co., Ltd

Company Name

Microfilter Co., Ltd

Address

162-1 SANSU-RI DEOKSAN-MYEON JINCHEONKUN CHUNGBUK 365-842

Phone

+82-43-531-7024

View All Listings by this Company

Manufacturer:

Microfilter Co., Ltd

Company Name

Microfilter Co., Ltd

Address

162-1 SANSU-RI DEOKSAN-MYEON JINCHEONKUN CHUNGBUK 365-842

Phone

+82-43-531-7024

View All Listings by this Company

‘Numepress’ range of stainless-steel crimp fittings incorporating EPDM and ‘O’-rings. For use with stainless steel tube. Maximum working pressure 16.0 bar. Maximum operating temperature 95°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2011045

Size:

15, 18, 22, 28, 35, 42, 54, 76, 88, 108, 114, 139, 168mm. ½”, ¾”, 1”, 1 ¼”, 1 ½”, 2” BSP (M or F). DN50 to DN150 Flanged.

Marking:

Numepress, logo & size on body

Installation Requirements:

R001

Expiry date:

30/11/2025

Model:

F1 Coupling from 15 to 168.3 F2 Slip Coupling from 15 to 168.3 F3 90Q Female-Female Elbow from 15 to 168.3 F4 90Q Male - Female Elbow from 15 to 168.3 F5 45Q Female-Female Elbow from 15 to 168.3 F6 45Q Female - Male Elbow from 15 to 168.3 F7 Female Angle Adapter from 15 1/2" to 54 2" F8 Male Angle Adapter from 15 1/2" to 54 2" F9 Female Elbow with Wallnut from 15 1/2" to 22 3/4" Fl0 90Q Elbow with Plane Ends from 15 to 54 F11 Valve connector with swivel in stainless Steel from 15 1/2" to 76.121/2" F12 Female tee threaded adaptor from 15 1/2" to 108 2" F14 Reducer from 18-15 to 168.3-139.7 F15 Reducing tee from 18-15 to 168.3-139.7 F16 Equal Tee from 15 to 168.3 F17 Female adaptor from 15 3/ 8" to 88.9 3" F18 M ale adaptor from 15 3/8" to 108 4" F19 Flanges adaptor from 15 DN15 to 108 DNlO0 F20 Pre-formed pipe bridge from 15 to 28 F21 Plug from 15 to 108 F22 Air tuve Pipe Bridge from 15 to 28 F23 Pipe Bridge from 15 to 28 F24 3 Pieces adaptor from 15 to 60.3 F25 Female -Female pipe bridge from 15 to 28 F26 Female connector from 15 1/2" to 54 2" F27 Male connector from 15 1/2" to 54 2" F28 Press flanged adaptor from 54 DN50 to 168.3 DN150 F30 Cross or reduced cross from 15-15-15-15 to 168.3-168.3-168.3-168 .3 F33 45Q Male angle adaptor from 15 1/ 2" to 28 1" F34 90Q Female angle adaptor 15 3/ 8" to 35 1 1/ 4" F35 90Q Female angle adaptor with swivel nut from 15 1/2" to 54 2" F36 Male Tee threaded adaptor from 15 3/8" to 35 11/4" F37 Male threaded cross from 15 1/2" to 108-4" F38 Female threaded cross from 15 1/ 2" to 108 4" F39 90Q Male angle adaptor from 15 3/8" to 54 2" F41 Male union connector gas from 15 1/ 2" to 54 2" F42 Female Union connector gas from 15 1/2" to 54 2" F43 Grooved Transition from 3/4" to 2" F44 Van Stone flange from 1/2" to 2" F45 Union Gas Female threaded from 15 3/4" to 54 2" F46 Straight union with press fitting on both ends from 15 to 54 F47 Half coupling from 15 to 168.3 F48 30Q Female-Female elbow from 15 to 108 F49 30Q Elbow with plain ends from 15 to 54 F50 15Q Female-female elbow from 15 to 108 F51 60Q Female-female elbow from 15 to 108 F52 Flanges adaptor PN6 from 15 DN15 to 108 DN100 F53 Pipe penetration from 15 to 108 F54 Male plug from 16 to 168.3 F55 Weld Adaptor from 15 to 60.3 F56 75Q Female -Female elbow from 15 to 108 F57 l0Q Female-Female elbow from 15 to 108 F58 60Q Elbow with plain ends from 15 to 54 F59 lSQ Elbow with plain ends from 15 to 54 F60 Slip coupling with female thread from DN15 1/ 2" to DN54 F61 Transition for grooved coupling from DN28x33.7 to DN108x 11 4.3 F63 7SQ Elbow with plain ends from 15 to 54 F64 15Q Male -female elbow from 15 to 108 F65 Male-Female pipe penetration from 15 to 108 F66 30Q Male-female elbow from 15 to 108 F72 45Q Elbow with plain ends from 15 to 54 Pipe 15 x 0.6 mm Material 1.4401/1.4404 Pipe 18 x 0.7 mm Material 1.4401/1.4404 Pipe 22 x 0.7 mm Material 1.4401/1.4404 Pipe 28 x 0.8 mm Material 1.4401/1.4404 Pipe 35 x 1 mm Material 1.4401/1.4404 Pipe 42 x 1.1 mm Material 1.4401/1.4404 Pipe 54 x 1.2 mm Material 1.4401/1.4404 Pipe 76.1 x 1.5 mm Material 1.4 401/ 1.4404 Pipe 15 x 1 mm Material 1.4401/1.4404 Pipe 18 x 1 mm Material 1.4401/1.4404 Pipe 22 x 1.2 mm Material 1.4401/1.4404 Pipe 28 x 1.2 mm Material 1.4401/1.4404 Pipe 35 x 1.5 mm Material 1.4401/1.4404 Pipe 42 x 1.5 mm Material 1.4401/1.4404 Pipe 54 x 1.5 mm Material 1.4401/1.4404 Pipe 76.1 x 2 mm Material 1.4401/1.4404 Pipe 88.9 x 2 mm Material 1.4401/1.4404 Pipe 114.3 x 2 mm Material 1.4401/1.4404 Pipe 139.7 x 2 mm Material 1.4401/1.4404 Pipe 139.7 x 2.6 mm Material 1.4401/1.4404 Pipe 168.3 x 2 mm Material 1.4401/1.4404 Pipe 168.3 x 2.6 mm Material 1.4401/1.4404 Pipe 15 x 0.6 mm Material 1.4301/1.4307 Pipe 18 x 0.7 mm Material 1.4301/1.4307 Pipe 22 x 0.7 mm Material 1.4301/1.4307 Pipe 28 x 0.8 mm Material 1.4301/1.4307 Pipe 35 x 1 mm Material 1.4301/1.4307 Pipe 42 x 1.1 mm Material 1.4301/1.4307 Pipe 54 x 1 .2 mm rv,Material 1.4301/1.4307 Pipe 76.1 x 1.5 mm Material 1.4301/1.4307 Pipe 15 x 1 mm Material 1.4301/1.4307 Pipe 18 x 1 mm Material 1.4301/1.4307 Pipe 22 x 1. 2 mm Material 1.4301/1.4307 Pipe 28 x 1.2 mm Material 1.4301/1.4307 Pipe 35 x 1.5 mm Material 1.4301/1.4307 Pipe 42 x 1.5 mm Material 1.4301/1.4307 Pipe 54 x 1.5 mm Material 1.4301/1.4307 Pipe 76.1 x 2 mm Material 1.4301/1.4307 Pipe 88.9 x 2 mm Material 1.4301/1.4307 Pipe 108 x 2 mm Material 1.4301/1.4307 Pipe 114.3 x 2 mm Material 1.4301/1.4307 Pipe 139.7 x 2 mm Material 1.4301/1.4307 Pipe 139.7 x 2.6 mm Material 1.4301/1 .4307 Pipe 168.3 x 2 mm Material 1.4301/1.4307 Pipe 168.3 x 2.6 mm Material 1.4301/1.4307

Product Images

Approval Holder:

ISOTUBI SL

Company Name

ISOTUBI SL

Address

Mecànica 6 Castellbisbal

Postcode

08750

Country

Spain

General Email

xavi.armengou@isotubi.com

View All Listings by this Company

‘Epsilon Series’ polypropylene bodied compression fittings with EPDM ‘O’-rings for use with Elysee PE80 blue pipes. The fittings are supplied with a pipe liner. Above and below ground use. Maximum working pressure 12.5 bar. Cold water use only.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2010385

Note:

The liners supplied with each fitting must be used to maintain the validity of this approval. R008 applies to the connecting blue pipework when used above ground.

Size:

See model

Marking:

Fittings: Elysee, DVGW, EU, size and PN on the compression nut. Size and date of manufacture (clock format) on body. Pipe: Elysee, EN12201, size, PN and production date code (CDDMMY, where C = decade, and is replaced with 6 to indicate 2020).

Installation Requirements:

R001 R008

Expiry date:

31/10/2025

Model:

ELYSEE COMRESSION FITTINGS: Male Adaptor 330: 330002001: Ø 20 x ½". 330002002: Ø 20 x ¾". 330002003: Ø 20 x 1". 330002501: Ø 25 x ½". 330002502: Ø 25 x ¾". 330002503: Ø 25 x 1". 330003201: Ø 32 x ½". 330003202: Ø 32 x ¾". 330003203: Ø 32 x 1". 330003204: Ø 32 x 1¼". 330003205: Ø 32 x 1½". Female Adaptor 330A: 330A02001: Ø 20 x ½". 330A02002: Ø 20 x ¾". 330A02010: Ø 20 x ⅜". 330A02501: Ø 25 x ½". 330A02502: Ø 25 x ¾". 330A02503: Ø 25 x 1". 330A03201: Ø 32 x ½". 330A03202: Ø 32 x ¾". 330A03203: Ø 32 x 1". 330A03204: Ø 32 x 1¼". 330A03205: Ø 32 x 1½". End Plug 330B: 330B00020: Ø 20. 330B00025: Ø 25. 330B00032: Ø 32. Coupling 331: 331020020: Ø 20 x 20. 331025025: Ø 25 x 25. 331032032: Ø 32 x 32. Reducing Coupling 331A: 331A02520: Ø 25 x 20. 331A03220: Ø 32 x 20. 331A03225: Ø 32 x 25. Elbow 332: 332020020: Ø 20 x 20. 332025025: Ø 25 x 25. 332032032: Ø 32 x 32. Male Elbow 332A: 332A02001: Ø 20 x ½". 332A02002: Ø 20 x ¾". 332A02501: Ø 25 x ½". 332A02502: Ø 25 x ¾". 332A02503: Ø 25 x 1". 332A03202: Ø 32 x ¾". 332A03203: Ø 32 x 1". Female Elbow 332B: 332B02001: Ø 20 x ½". 332B02002: Ø 20 x ¾". 332B02501: Ø 25 x ½". 332B02502: Ø 25 x ¾". 332B02503: Ø 25 x 1". 332B03202: Ø 32 x ¾". 332B03203: Ø 32 x 1". Female Tee 333: 333002001: Ø 20 x ½" x 20. 333002002: Ø 20 x ¾" x 20. 333002501: Ø 25 x ½" x 25. 333002502: Ø 25 x ¾" x 25. 333002503: Ø 25 x 1" x 25. 333003202: Ø 32 x ¾" x 32. 333003203: Ø 32 x 1" x 32. Male Tee 333A: 333A02001: Ø 20 x ½" x 20. 333A02002: Ø 20 x ¾" x 20. 333A02003: Ø 20 x 1" x 20. 333A02501: Ø 25 x ½" x 25. 333A02502: Ø 25 x ¾" x 25. 333A02503: Ø 25 x 1" x 25. 333A03201: Ø 32 x ½" x 32. 333A03202: Ø 32 x ¾" x 32. 333A03203: Ø 32 x 1" x 32. Tee 334: 334020020: Ø 20 x 20 x 20. 334025025: Ø 25 x 25 x 25. 334032032: Ø 32 x 32 x 32. Reducing Tee 334A: 334A02520: Ø 25 x 20 x 25. 334A03225: Ø 32 x 25 x 32. Wall Female Elbow 332D: 332D02001: Ø 20 x ½". 332D02502: Ø 25 x ¾". Elbow Female For POP-UP 332C: 332C02501: Ø 25 x ½" x 25. 332C03201: Ø 32 x ½" x 32. 332C03202: Ø 32 x ¾" x 32. Universal Adaptor 321C: 321C02522: Ø 25 x 22. 321C03222: Ø 32 x 22. Repair Coupling 331B: 331B00025: Ø 25 x 25. 331B00032: Ø 32 x 32. ELYSEE PE80 BLUE PIPES: 21125020***: 20mmX2.3mm, SDR9, SF1.25, PN12.5. 21125025***: 25mmX2.3mm, SDR11, SF1.25, PN12.5. 21125032***: 32mmX3.0mm, SDR11, SF1.25, PN12.5. Where *** = length of the pipe coil, (025 = 25m, 050 = 50m, 100 = 100m).

Approval Holder:

Elysee Irrigation Ltd.

Company Name

Elysee Irrigation Ltd.

Address

5, Pentadaktylou St. 2643 Ergates Industrial Area, Nicosia

Country

Cyprus

Phone

+357 22 455 000

View All Listings by this Company

Manufacturer:

Elysee Irrigation Ltd.

Company Name

Elysee Irrigation Ltd.

Address

5, Pentadaktylou St. 2643 Ergates Industrial Area, Nicosia

Country

Cyprus

Phone

+357 22 455 000

View All Listings by this Company

Range of Eco Duo copper press fittings with EPDM ‘O’-rings for use with Eco-Duo copper tube. The joints are achieved by means of a crimping tool. For above ground use only. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:

1100 Fittings and Pipe - Compatible Systems

Section Subtitle:

Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2010342

Size:

See model

Marking:

Water-Kinetic logo and QR on pipework and fitting sleeve.

Installation Requirements:

R001

Expiry date:

31/10/2025

Model:

Eco-Duo Copper Pipe Outer: W1501CP 15mm - 3m length W1502CP 22mm - 3m length W1503CP 28mm - 3m length W1504CP 35mm - 3m length W1505CP 42mm – 3m length W1506CP 54mm – 3m length W1507CP 66.7mm – 3m length W1508CP 76.1mm – 3m length Eco-Duo 90 Degree Elbow: W1509CP for 15mm W1510CP for 22mm W1511CP for 28mm W1512CP for 35mm W1513CP for 42mm W1514CP for 54mm W1515CP for 66.7mm W1516CP for 76.1mm Eco-Duo 90 Degree Street Elbow: W1517CP for 15mm W1518CP for 22mm W1519CP for 28mm W1520CP for 35mm W1521CP for 42mm W1522CP for 54mm Eco-Duo Equal Tee: W1541CP for 15mm W1542CP for 22mm W1543CP for 28mm W1544CP for 35mm W1545CP for 42mm W1546CP for 54mm W1547CP for 66.7mm W1548CP for 76.1mm Eco-Duo Coupling Reducer: W1549CP for 22mm x 15mm W1550CP for 28mm x 22mm W1649CP for 28mm x 15mm W1650CP for 35mm x 28mm W1651CP for 42mm x 35mm W1652CP for 54mm x 42mm Eco-Duo Coupler Street Reducer: W1551CP for 28mm x 15mm W1552CP for 35mm x 22mm W1553CP for 35mm x 28mm W1554CP for 42mm x 22mm W1555CP for 42mm x 28mm W1556CP for 42mm x 35mm W1557CP for 54mm x 35mm W1558CP for 54mm x 42mm W1559CP for 66.7mm x 28mm W1560CP for 66.7mm x 35mm W1561CP for 66.7mm x 42mm W1562CP for 66.7mm x 54mm W1563CP for 76.1mm x 35mm W1564CP for 76.1mm x 42mm W1565CP for 76.1mm x 54mm W1566CP for 76.1mm x 66.7mm Eco-Duo Straight Coupling: W1567CP for 15mm W1568CP for 22mm W1569CP for 28mm W1570CP for 35mm W1571CP for 42mm W1572CP for 54mm W1573CP for 66.7mm W1574CP for 76.1mm Eco-Duo Copper Press Slip Coupler: W1584CP For 15mm W1585CP for 22mm W1586CP for 28mm W1587CP for 35mm W1588CP for 42mm W1589CP for 54mm W1590CP for 66.7mm W1591CP for 76.1mm Eco-Duo Tee Reduced Branch: W1594CP for 108x108x54 W1595CP for 108x108x66.7mm W1596CP for 108x108x76.1mm W1635CP for 22x22x15mm W1636CP for 28x28x15mm W1637CP 28x28x22mm W1638CP 35x35x15mm W1639CP 35x35x22mm W1640CP 35x35x28mm W1641CP for 42x42x15mm W1642CP for 42x42x22mm W1643CP for 42x42x28mm W1645CP for 54x54x22mm W1646CP for 54x54x28mm W1647CP for 54x54x35mm W1648CP for 54x54x42mm Eco-Duo Confluence Tee: W1575CP for 22mm W1576CP for 28mm W1577CP for 35mm W1578CP for 42mm W1579CP for 54mm W1580CP for 66.7mm W1581CP for 76.1mm

Product Images

Approval Holder:

Water-Kinetics

Company Name

Water-Kinetics

Address

Lomond House 7 Greenbank Road Darvel

Postcode

KA17 0NN

View All Listings by this Company

Manufacturer:

Water-Kinetics

Company Name

Water-Kinetics

Address

Lomond House 7 Greenbank Road Darvel

Postcode

KA17 0NN

View All Listings by this Company

Range of compression fittings with polypropylene bodies, nuts, acetal grip rings, EPDM ‘O’-rings and plastic pipe liners for use with MDPE pipe manufactured to BS EN 12201. For above and below ground use. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1160 Fittings for use with Tube and Pipe

Section Subtitle:

Compression, plastic, for use with plastic tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use

WRAS Approval Number:

2009337

Note:

The supplied pipe liners must be installed to maintain the validity of this approval.

Size:

20-63mm compression. ½”-2” BSP (M) or (F)

Marking:

Manufacturers name, size and date of manufacture (clock format) on body.

Installation Requirements:

R001

Expiry date:

30/09/2025

Model:

Couplers: 20.41.2005.020: 20mm 20.41.2005.025: 25mm 20.41.2005.032: 32mm 20.41.2005.040: 40mm 20.41.2005.050: 50mm 20.41.2005.063: 63mm Reducing Couplers: 20 41 2007 005: 25mm x 20mm 20 41 2007 009: 32mm x 20mm 20 41 2007 010: 32mm x 25mm 20 41 2007 015: 40mm x 32mm 20 41 2007 019: 50mm x 32mm 20 41 2007 020: 50mm x 40mm 20 41 2007 023: 63mm x 32mm 20 41 2007 024: 63mm x 40mm 20 41 2007 025: 63mm x 50mm Male Adaptors - Male BSP Thread: 20 41 2037 005: 20mm x ½” 20 41 2037 010: 20mm x ¾” 20 41 2037 011: 20mm x 1” 20 41 2037 015: 25mm x ½” 20 41 2037 020: 25mm x ¾” 20 41 2037 025: 25mm x 1” 20 41 2037 030: 32mm x ¾” 20 41 2037 035: 32mm x 1” 20 41 2037 040: 32mm x 1¼ 20 41 2037 042: 40mm x 1” 20 41 2037 045: 40mm x 1¼” 20 41 2037 046: 40mm x 1½” 20 41 2037 049: 50mm x 1¼” 20 41 2037 050: 50mm x 1½” 20 41 2037 052: 50mm x 2” 20 41 2037 053: 63mm x 1½” 20 41 2037 055: 63mm x 2” Female Adaptors - Female BSP Thread: 20 41 2065 005: 20mm x ½” 20 41 2065 010: 20mm x ¾” 20 41 2065 019: 25mm x ½” 20 41 2065 020: 25mm x ¾” 20 41 2065 022: 25mm x 1” 20 41 2065 033: 32mm x ½” 20 41 2065 034: 32mm x ¾” 20 41 2065 035: 32mm x 1” 20 41 2065 036: 32mm x 1¼” 20 41 2065 044: 40mm x 1” 20 41 2065 045: 40mm x 1¼” 20 41 2065 046: 40mm x 1½” 20 41 2065 049: 50mm x 1¼” 20 41 2065 050: 50mm x 1½” 20 41 2065 051: 50mm x 2” 20 41 2065 054: 63mm x 1½” 20 41 2065 055: 63mm x 2” Elbow 90°: 20 41 2001 020: 20mm 20 41 2001 025: 25mm 20 41 2001 032: 32mm 20 41 2001 040: 40mm 20 41 2001 050: 50mm 20 41 2001 063: 63mm Elbow 90° Female BSP Thread: 20 41 2002 005: 20mm x ½’ 20 41 2002 006: 20mm x ¾” 20 41 2002 009: 25mm x ½” 20 41 2002 010: 25mm x ¾” 20 41 2002 011: 25mm x 1” 20 41 2002 013: 32mm x ¾” 20 41 2002 015: 32mm x 1” 20 41 2002 019: 40mm x 1” 20 41 2002 020: 40mm x 1¼” 20 41 2002 025: 50mm x 1½” 20 41 2002 026: 50mm x 2” 20 41 2002 030: 63mm x 2” Elbow 90° Male BSP Thread: 20 41 2085 005: 20mm x ½” 20 41 2085 006: 20mm x ¾” 20 41 2085 009: 25mm x ½” 20 41 2085 010: 25mm x ¾” 20 41 2085 011: 25mm x 1” 20 41 2085 014: 32mm x ¾” 20 41 2085 015: 32mm x 1” 20 41 2085 016: 32mm x 1¼” 20 41 2085 019: 40mm x 1” 20 41 2085 020: 40mm x 1¼” 20 41 2085 021: 40mm x 1½” 20 41 2085 022: 40mm x 2” 20 41 2085 022: 50mm x 1¼” 20 41 2085 025: 50mm x 1½” 20 41 2085 026: 50mm x 2” 20 41 2085 029: 63mm x 1½” 20 41 2085 030: 63mm x 2” Tee Male BSP Threaded: 20 41 2086 005: 20mm x ½” 20 41 2086 006: 20mm x ¾” 20 41 2086 009: 25mm x ½” 20 41 2086 010: 25mm x ¾” 20 41 2086 011: 25mm x 1” 20 41 2086 014: 32mm x ¾” 20 41 2086 015: 32mm x 1” 20 41 2086 019: 40mm x 1” 20 41 2086 020: 40mm x 1¼” 20 41 2086 021: 40mm x 1½” 20 41 2086 025: 50mm x 1½” 20 41 2086 026: 50mm x 2” 20 41 2086 030: 63mm x 2” Tee Female BSP Threaded: 20 41 2004 005: 20mm x ½” 20 41 2004 006: 20mm x ¾” 20 41 2004 009: 25mm x ½” 20 41 2004 010: 25mm x ¾” 20 41 2004 011: 25mm x 1” 20 41 2004 014: 32mm x ¾” 20 41 2004 015: 32mm x 1” 20 41 2004 019: 40mm x 1” 20 41 2004 020: 40mm x 1¼” 20 41 2004 021: 40mm x 1½” 20 41 2004 024: 50mm x 1¼” 20 41 2004 025: 50mm x 1½” 20 41 2004 026: 50mm x 2” 20 41 2004 030: 63mm x 2” Tee: 20 41 2003 020: 20mm 20 41 2003 025: 25mm 20 41 2003 032: 32mm 20 41 2003 040: 40mm 20 41 2003 050: 50mm 20 41 2003 063: 63mm Reducing Tee: 20 41 2004 104: 20 x 25 x 20mm 20 41 2004 105: 25 x 20 x 25mm 20 41 2004 110: 32 x 25 x 32mm 20 41 2004 115: 40 x 32 x 40mm 20 41 2004 118: 50 x 25 x 50mm 20 41 2004 119: 50 x 32 x 50mm 20 41 2004 120: 50 x 40 x 50mm 20 41 2004 122: 63 x 25 x 63mm 20 41 2004 123: 63 x 32 x 63mm 20 41 2004 124: 63 x 40 x 63mm 20 41 2004 125: 63 x 50 x 63mm End Cap: 20 41 2012 020: 20mm 20 41 2012 025: 25mm 20 41 2012 032: 32mm 20 41 2012 040: 40mm 20 41 2012 050: 50mm 20 41 2012 063: 63mm

Approval Holder:

Plimat (UK) Ltd

Company Name

Plimat (UK) Ltd

Address

Unit 7, Newmans Copse Road, Hounsdown Business Park, Totton, Southampton

Postcode

SO40 9LX

Phone

0845 055 9022

View All Listings by this Company