Turbo S1-11 Dual Flush syphonic flushing apparatus with Polypropylene body and stainless steel link for use with WC flushing cisterns.

Section:

1305 Flushing Mechanisms

Section Subtitle:

WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.

WRAS Approval Number:

2202902

Size:

1½” Outlet, Syphon heights 8” to 12”.

Marking:

DUDLEY TURBO 11 2-PART SYPHON on top of valve body.

Installation Requirements:

R001

Expiry date:

31/12/2026

Model:

S1-11 Syphon

Approval Holder:

Thomas Dudley Limited

Company Name

Thomas Dudley Limited

Postcode

DY1 4SJ

Country

United Kingdom

Phone

0121 530 7053

General Email

jcresswell@thomasdudley.co.uk

View All Listings by this Company

Manufacturer:

Thomas Dudley Limited

Company Name

Thomas Dudley Limited

Postcode

DY1 4SJ

Country

United Kingdom

Phone

0121 530 7053

General Email

jcresswell@thomasdudley.co.uk

View All Listings by this Company

OMEG range of wall mounted, near-boiling water dispensers (cased and insulated). The products incorporate a solenoid valve which controls the flow, a stainless-steel tank, 3 or 5L (see model), and a plastic strainer at the inlet. Maximum supply pressure 10.0 bar. Cold water supply only. Maximum operating temperature 95˚C

Section:

1380 Heaters

Section Subtitle:

Electric, thermal storage, mains fed, closed outlet. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within with system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

2111024

Size:

¾” BSP (M) inlet.

Marking:

HYCO on front of unit. HYCO & OMEG on technical label.

Installation Requirements:

R001 R040

Expiry date:

30/11/2026

Model:

OMEG3 and OMEG5

Approval Holder:

Hyco Manufacturing Ltd

Company Name

Hyco Manufacturing Ltd

Address

California Drive, Castleford, West Yorkshire

Postcode

WF10 5QH

View All Listings by this Company

Range of floor standing gas fired combination boilers providing domestic hot water via a stainless-steel plate heat exchanger. Unit is supplied with a safety relief valve (8.0 bar). Maximum working pressure 7.5 bar. Maximum operating temperature 85°C.

Section:

1465 Heaters

Section Subtitle:

Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.

WRAS Approval Number:

2111371

Size:

2 ½” BSP (M)

Marking:

Lochinvar on front casing. Lochinvar , model & serial number on adhesive label on body

Installation Requirements:

R001 R140 R360

Expiry date:

30/11/2026

Model:

TTW410 & TTW580 FLOOR STANDING GAS FIRED COMBINATION BOILERS

Approval Holder:

Lochinvar Ltd.

Company Name

Lochinvar Ltd.

Address

8 Lombard Way The MXL Centre Banbury

Postcode

OX16 4TJ

Country

Oxon

Phone

+44 (0) 1295 269981

General Email

general@lochinvar.ltd.uk

View All Listings by this Company

Aquila V5 range of water meters with black epoxy coated cast iron bodies, plastic turbines, fibre/NBR flange gaskets and either NBR or EPDM ‘O’-rings. Maximum working pressure 16.0 bar. Cold water use only.

Section:

1505 Water Meters

Size:

See models

Marking:

DIEHL Metering and technical information under cap. Flow arrow and size on body. Size and PN on flange plate.

Installation Requirements:

R001

Expiry date:

31/12/2026

Model:

Aquila V5 Range: Model C1 - DN50 length 300mm, Model C1 - DN65, length 300mm, Model C1 - DN80 length 350mm, Model C1 - DN100 length 350mm.

Approval Holder:

Diehl Metering S.A.S

Company Name

Diehl Metering S.A.S

Address

67, Rue du Rhone, BP 10160, 68304 Saint Louis

Country

Cedex,

View All Listings by this Company

Range of ultrasonic water meters with brass bodies incorporating EPDM ‘O’-rings. The inlets incorporate a plastic strainer. The DN15 X 165mm and DN20 X 190mm models incorporate a non-return valve on the outlet. Maximum working pressure 16.0 bar. Maximum operating temperature 50°C.

Section:

1505 Water Meters

Size:

DN15 models: ¾” BSP (M). DN20 model: 1” BSP (M).

Marking:

Badger Meter, size, flow arrow, model name, date of manufacture (MM/YY) and technical information on meter face. Flow arrow and size on body.

Installation Requirements:

R001

Expiry date:

31/12/2026

Model:

E-Series G2® Ultrasonic Meter Range: DN15 X 110 ultrasonic meter, meter body: Eco Brass C69300, DN15 X 114 ultrasonic meter, meter body: Eco Brass C69300, DN15 X 165 ultrasonic meter, meter body: Eco Brass C69300, DN20 X 190 ultrasonic meter, meter body: Eco Brass C69300.

Approval Holder:

Badger Meter Inc.

Company Name

Badger Meter Inc.

Address

4545 W Brown Deer Road, Milwaukee WI

Postcode

53223

Country

United States

Phone

+1 414 371 5941

General Email

rschultz@badgermeter.com

View All Listings by this Company