Range of multistage centrifugal pumps with stainless steel impellers, intermediate chambers, shaft and outer sleeve. The Movitec VME models and VE/VSE models added May 2025 can also incorporate an approved check valve cartridge; however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressures: Existing models: Comeo C models 10.0 bar, Movitec VM models with an oval flange or VME models with integral check valve 16.0 bar, All other Movitec VM models 25.0 bar. Models added May 2025: Movitec V/VS models with an oval flange or VE models with integral check valve 16.0 bar, All other Movitec V/VS models and Movitec HI/HSI models 25.0 bar. Maximum operating temperatures: Existing models: Comeo C and Movitec VME models with integral check valve 60°C, all other model variants 100°C. Models added May 2025: Movitec VE models with integral check valve 60°C, all other model variants 100°C.

Section:

1610 Pumps

Section Subtitle:

Wholesome water use.

WRAS Approval Number:

250302718

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

Movitec VM (-/F/E/V/T) 2/4/6 B: Oval flange: DN25, DN32. Round flange: DN25, DN32. External threaded: 1½” BSP (M), Victaulic: DN32 and Tri-clamp: DN32. Comeo C 2/4/6 B: 1¼” BSP (F) inlet x 1” BSP (F) outlet. Sizes added May 2025: Movitec V/VS (-/F/E/V/T) 2/4/6 B: Oval flange: DN25, DN32. Round flange: DN25, DN32. External threaded: 1½” BSP (M), Victaulic: DN32 and Tri-clamp: DN32. Movitec V/VS (-/F/E/V/T) 10 B/15 B/15 C: Oval flange: DN40, DN50. Round flange: DN40, DN50. External threaded: 1½” BSP (M), Victaulic: DN50 and Tri-clamp: DN50. Movitec V/VS F 25/40/60/90/125 B: Round flange: DN65, DN80, DN100, DN125. Movitec HI/HSI 2/4/6 B: 1¼” BSP or NPT (F). Movitec HI/HSI 10/15 B: 2” BSP or NPT (F).

Marking:

KSB logo, model name, PN, WRAS and technical information on adhesive label on body.

Installation Requirements:

R001 R415

Expiry date:

31/03/2030

Model:

Movitec VM (-/F/E/V/T) x yy B, Comeo C x yy B. Where: VM = Vertically oriented (AISI 304) with close coupled motor/ pump (pump/ motor shaft combined). No indication (VM only) = oval flange. F (VMF) = round flange. E (VME) = external tread. V (VMV) = Victaulic. T (VMT) = Triclamp. x = flow rate m³/h (2, 4 or 6). yy = no. of stages Movitec VM and Comeo C ranges 1-6 stages. Models added May 2025: Movitec V/VS (-/F/E/V/T) x yy B, Movitec V/VS (-/F/E/V/T) 15 yy C. Where: V = Vertically oriented (AISI 304) with coupling. VS = Vertically oriented (AISI 316) with coupling. No indication (V/VS only) = oval flange. F (VF/VSF) = round flange. E (VE) = external thread. V (VV/VSV) = Victaulic. T (VT/VST) = Triclamp. x = flow rate m³/h (2, 4, 6, 10, 15). yy = no. of stages Movitec V/VS……2 B 1-30 stages. Movitec V/VS……4/6 B 1-26 stages. Movitec V/VS……10 B 1-21 stages. Movitec V/VS……15 B/C 1-17 stages. -------------------------------------- Movitec V/VS F xx yy B. Where: V = Vertically oriented (AISI 304) with coupling. VS = Vertically oriented (AISI 316) with coupling. F (VF/VSF) = round flange. x = flow rate m³/h (25, 40, 60, 90 or 125). yy = no. of stages Movitec V/VS……25 B 1-12 stages. Movitec V/VS……40/60 B 1-10 stages. Movitec V/VS……90 B 1-6 stages. Movitec V/VS……125 B 1-4 stages. -------------------------------------- Movitec HI/HSI x yy B, Movitec HI/HSI 15 yy C. Where: H = Vertically oriented (AISI 304). HS = Vertically oriented (AISI 316). I = Inner thread connection. x = flow rate m³/h (2, 4, 6, 10 or 15). yy = no. of stages Movitec HI/HSI 2/4/6 B 1-14 stages. Movitec HI/HSI 10 B/15 B/15 C 1-8 stages.

Approval Holder:

KSB Manufacturing B.V.

Company Name

KSB Manufacturing B.V.

Address

Kalkovenweg 13 2401LI Alphen Aan Den Rijn

Country

Netherlands

View All Listings by this Company

Range of overhead shower outlets brass and stainless-steel bodies in various finishes, incorporating stainless steel filter washers and flow regulators. Open outlet use only. Maximum operating temperature 85⁰C.

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250408013

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (F).

Marking:

Coalbrook logo on the upper face

Installation Requirements:

R001 R040

Expiry date:

30/04/2030

Model:

XX 4013 YY, XX 4014 YY. XX denotes the name of the product, example CO – Coalbrook. Middle 4 numbers is a numeric code allocated to the model and remains constant. YY denotes the colour finish, examples are but not limited to – BN – Brushed Nickel. CP – Chrome. GM – Gunmetal. BB – Brushed Brass.

Approval Holder:

Davroc Limited

Company Name

Davroc Limited

Postcode

EN11 0QS

Country

United Kingdom

General Email

rob@lefroybrooks.co.uk

View All Listings by this Company

Range of wall and ceiling mounted overhead shower outlets, (plastic bodies – various finishes). Both models incorporate a built-in pressure regulator. Maximum operating temperature 85°C. Open outlet use only

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250402055

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

1/2” BSP M.

Marking:

GROHE logo on showerhead.

Installation Requirements:

R001 R040

Expiry date:

30/04/2030

Model:

22121xxx - Grohe Rainshower Mono 310. Head shower set 422 mm, 1 spray. 22122xxx - Grohe Rainshower Mono 310. Head shower set ceiling 142 mm, 1 spray. Where xxx denotes finish, and can be replaced by the following: 000 – Chrome KF0 – phantom black

Approval Holder:

Grohe AG

Company Name

Grohe AG

Address

Industriepark Edelburg Hemer

Postcode

58675

Country

Germany

Phone

02372 930

General Email

marc.engelhardt@lixil.com

View All Listings by this Company

Range of wall mounted (chromium plated brass bodies) spray outlets, incorporating a plastic flow regulator at the inlet and a plastic aerator. Open outlet use only. Maximum operating temperature 60.0°C

Section:

1650 Shower Outlets

Section Subtitle:

Shower head(s) and/or shower handset(s).

WRAS Approval Number:

250602004

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

½” BSP (M)

Marking:

Dornbracht on face plate

Installation Requirements:

R001 R040

Expiry date:

30/06/2030

Model:

36514979

Manufacturer:

Dornbracht GmbH & Co. KG.

Company Name

Dornbracht GmbH & Co. KG.

Address

Koebbingser Muehle 6 Iserlohn

Postcode

D-58640

Country

Germany

Phone

+49 2371 433 0

View All Listings by this Company

BOSS Range of Y-pattern strainers with DZR brass bodies and stainless steel strainers. The compression connection is for use with copper pipe to BS EN1057. Maximum working pressure 20 bar (BSP threaded models ½”-2”), 16.0 bar (compression models). Maximum operating temperature 85°C.

Section:

1715 Strainers

Basis of Compliance:

Tested to regulators Specification Test Code Sheets

Size:

see models

Marking:

BOSS, date of manufacture: MM-YY, CR & flow arrow on body

Installation Requirements:

R001 R120

Expiry date:

31/08/2030

Model:

10460003 - 15MM BOSS 46W Y STRAINER DZR 1/2" BSP (F) 10460014 - 20MM BOSS 46W Y STRAINER DZR 3/4" BSP (F) 10460025 - 25MM BOSS 46W Y STRAINER DZR 1" BSP (F) 10460036 - 32MM BOSS 46W Y STRAINER DZR 1-1/4" BSP (F) 10460047 - 40MM BOSS 46W Y STRAINER DZR 1-1/2" BSP (F) 10460058 - 50MM BOSS 46W Y STRAINER DZR 2" BSP (F) 10460110 - 15MM BOSS 46CW Y STRAINER DZR 15MM Compression 10460121 - 22MM BOSS 46CW Y STRAINER DZR 22MM Compression

Approval Holder:

BSS Industrial

Company Name

BSS Industrial

Address

Travis Perkins PLC Ryehill House Rye Hill Cose Lodge Farm Industrial Estate Northampton

Postcode

NN5 7UA

Country

United Kingdom

Phone

07392109053

General Email

benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company