Water Regulations Approval Scheme Ltd

Directory Search Results

WRAS Approval Number: #2206045

Range of copper and DZR brass press fit tap connectors for use with copper tube (manufactured to EN1057). Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1180 Fittings for use with Tube and Pipe
Section Subtitle:: Couplings. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2206045
Size:: ½” press fit x ½” BSP captive nut. ¾” press fit x ¾” BSP captive nut.
Marking:: >B< (manufacturer’s logo), DR & size on body
Installation Requirements:: R001
Expiry date:: 30/06/2027
Model:: PIR5002G – Bent Tap Connector PIR5002G040400 & PIR5002G060600. PIR5240G – Straight Tap Connector PIR5240G040400 & PIR5240G060600.

Approval Holder:: Conex Universal Limited

Company Name
Conex Universal Limited
Address
Unit 95, Vantage Point Kingswinford
Postcode
DY6 7FT
Country
United Kingdom
Phone
+44 (0)121 5772831
General Email
Christopher.Harte@IBPGroup.com

View All Listings by this Company
Manufacturer:: Conex Universal Limited

Company Name
Conex Universal Limited
Address
Unit 95, Vantage Point Kingswinford
Postcode
DY6 7FT
Country
United Kingdom
Phone
+44 (0)121 5772831
General Email
Christopher.Harte@IBPGroup.com

View All Listings by this Company

WRAS Approval Number: #2211802

Range of end feed brass fittings for use with copper tube (manufactured to EN 1057). The HLE20CB-d tank connector incorporates an EPDM washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1210 Fittings for use with Tube and Pipe
Section Subtitle:: End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2211802
Size:: End feed: 15mm-54mm (see model). Threaded connections: ¼”-2” BSP (see model).
Marking:: HAILIANG, size & PN on body.
Installation Requirements:: R001
Expiry date:: 30/11/2027
Model:: HLE11EB-a Female 90 Degree Elbow: 15mm-54mm x ¼”-2” BSP (F). HLE11EB-b Male 90 Degree Elbow: 15mm-54mm x ¼”-2” BSP (M). HLE11EB-c Wallplate: 15mm-22mm x ½”-¾” BSP (F). HLE20CB-a Male Coupler: 15mm-54mm x ⅜”-2” BSP (M). HLE20CB-b Female Coupler: 15mm-54mm x ⅜”-2” BSP (F). HLE20CB-c S/R W/Plate Straight: 15mm-22mm x ¼”-¾” BSP (F). HLE20CB-d Tank connector: 15mm-28mm x ½”-1” BSP (M). HLE30TB-a Female Tee: 15mm-28mm x 15mm-28mm x ¼”-1¼” BSP (F). 15mm-28mm x ¼”-1” BSP (F) x 15mm-28mm.

Approval Holder:: Zhejiang Hailiang Co., Ltd

Company Name
Zhejiang Hailiang Co., Ltd
Address
Diankou Zhuji Zhejiang
Country
China

View All Listings by this Company

WRAS Approval Number: #2208804

Range of end feed copper fittings for use with copper tube to EN 1057. The HLDPMFWT and HLDPMFZT models incorporate a captive nut on one end with a fibre gasket washer. Maximum working pressure 16.0 bar. Maximum operating temperature 85°C.

Section:: 1210 Fittings for use with Tube and Pipe
Section Subtitle:: End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2208804
Size:: End feed: 8mm-108mm and ½” - 1” (see model). Threaded connections: ½”-2” BSP (M)/(F) and 1” captive nut (see model).
Marking:: HAILIANG, size & PN on body.
Installation Requirements:: R001
Expiry date:: 31/08/2027
Model:: HLE11ECC-a Elbow 90 degree C X C: 8mm-108mm. HLE11ECC-b Street Elbow 90 degree Ftg X C: 8mm-108mm. HLE11ECC-c Street Elbow 45 degree Ftg X C: 8mm-108mm. HLE11ECC-d Street Elbow 45 degree Long Turn Ftg X C: 8mm-108mm. HLE11ECC-e Elbow 45 degree C X C: 8mm-108mm. HLE11ECC-f Elbow 45 degree Long Turn C X C: 8mm-108mm. HLE11ECC-g Street Elbow 90 degree Long Turn Ftg X C: 8mm-108mm. HLE11ECC-h Elbow 90 degree Long Turn C X C: 8mm-108mm. HLBGQW Partial Crossover Ftg x C: 12mm-28mm. HLE20CC-a Straight Coupling with dot C X C: 8mm-108mm. HLE20CC-b Slip Straight Coupling C X C: 8mm-108mm. HLE20CC-c Straight Coupling with groove C X C: 8mm-108mm. HLE21RCC-a Fitting Reducer Ftg X C: 8mm-108mm. HLE21RCC-b Reducing Coupler C X C: 8mm-108mm and ½” - 1”. HLE30TCC-a Equal TEE CxCxC: 8mm-108mm. HLE30TCC-b DWV Equal TEE CxCxC: 12mm-54mm. HLE31TRC Reducing Tee CxCxC: 8mm-108mm. HLE40CAP Cap: 8mm-108mm. HLGQW Full Crossover C x C: 12mm-28mm. HLNSZJ Female Adapter C X C: 15mm x ½” NPT (F) - 54mm x 2” NPT (F). HLUXW Return Bend Stop: 15mm-54mm. HLWSZJ Male Adapter C X C: 15mm x ½” NPT (M) - 54mm x 2” NPT (M). HLYJWT Reducing Elbow 90 degree C X C: 15mm-54mm. HLZDWT BENT CYLINDER UNION: 22mm x 1” captive nut and 28mm x 1” captive nut. HLZDZT STRAIGHT CYLINDER UNION: 22mm x 1” captive nut and 28mm x 1” captive nut. HLDPMFWT Bent Nut Connect C x Fi: 15mm x ½” captive nut - 22mm x ¾” captive nut. HLDPMFZT Straight Nut Connect C x Fi: 15mm x ½” captive nut - 22mm x ¾” captive nut.

Approval Holder:: Zhejiang Hailiang Co., Ltd

Company Name
Zhejiang Hailiang Co., Ltd
Address
Diankou Zhuji Zhejiang
Country
China

View All Listings by this Company

WRAS Approval Number: #2207803

Range of end feed copper or gunmetal solder fittings for use with copper pipe. Maximum working pressure 16.0 bar (Sizes 8 - 28mm). Maximum working pressure 10.0 bar (Sizes 35 - 108mm). Maximum operating temperature 100°C.

Section:: 1210 Fittings for use with Tube and Pipe
Section Subtitle:: End feed, for use with copper tube. Unless specified in the individual approval, the products within this section are not suitable for below ground use
WRAS Approval Number:: 2207803
Size:: 8mm to 108mm
Marking:: Viega on body.
Installation Requirements:: R001
Expiry date:: 31/07/2027
Model:: Copper models: 95002A - elbow 90°, 95001A - elbow 90°, 95041 - elbow 45°, 95040 - elbow 45°, 95090 - elbow 90°, 95092 - elbow 90°, 95103 - T-piece, 95085 - crossover, 95086 - crossover, 95270 - coupling, 95240 - reducing coupling, 95243 - reducing, 95301 - cap. Gunmetal models: 94130G - T-piece, 94243G - adapter, 94472G - Wall plate, 94090G - adapter elbow 90°, 94280G - adapter, 94270G - adapter, 94246G - plug-in piece, 94092G - adapter elbow 90°, 94340 - screw fitting, 94471G - wall plate elbow, 94096G - adapter union elbow 90°, 94340G - adapter union.

Approval Holder:: Viega GmbH & Co. KG

Company Name
Viega GmbH & Co. KG
Address
Viega Platz 1 Attendorn
Postcode
57439
Country
Germany
Phone
+49 (2722) 61-5280
General Email
andre.quartier@viega.de

View All Listings by this Company

WRAS Approval Number: #2206326

WC dual flush outlet valve comprising of ABS plastic body, EPDM gasket and an internal overflow. Cold water use only

Section:: 1305 Flushing Mechanisms
Section Subtitle:: WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:: 2206326
Size:: 58.82mm Ø.
Marking:: Oceanwell and model code on body
Installation Requirements:: R001 R571 R581
Expiry date:: 30/06/2027
Model:: D33-J316-01

Approval Holder:: Oceanwell (Xiamen) Industrial Co.,Ltd

Company Name
Oceanwell (Xiamen) Industrial Co.,Ltd
Address
33 Shishan North Road, Dongfu Street, Dongfu Town, Haicang District Xiamen
Country
China
Phone
+86-592-5710506

View All Listings by this Company
Manufacturer:: Oceanwell (Xiamen) Industrial Co.,Ltd

Company Name
Oceanwell (Xiamen) Industrial Co.,Ltd
Address
33 Shishan North Road, Dongfu Street, Dongfu Town, Haicang District Xiamen
Country
China
Phone
+86-592-5710506

View All Listings by this Company

WRAS Approval Number: #2206361

Range of heat exchangers connected to copper waste pipe, Where the waste is discharged down a “rotator” into a copper waste pipe, and potable water is returned to the shower/heating device via a copper double walled jacket around the copper waste pipe. Maximum working pressure 8.0 bar. Maximum operating temperature 60°C

Section:: 1350 Heat Exchangers
Size:: ½” BSP (F)
Marking:: Manufacturer ( Builidng Product Distribution) Manufacturer address Type Category BPD Ltd Serial No. Model & other information on Adhesive label.
Installation Requirements:: R001
Expiry date:: 30/06/2027
Model:: Showersave: QB1-21C QB1-16C QB1-12C QB1-21 Cyclone QB1-21 QB1-16 QB1-12 QB1-21D QB1-21D HE Models added June 2024 - maximum working pressure of 10.0 bar. QBI-21XE QBI-10XE

Approval Holder:: BPD Limited

Company Name
BPD Limited
Address

View All Listings by this Company

WRAS Approval Number: #2206340

Range of 4 or 6 port manifolds with or without water meter manifolds (see model), all with gunmetal bodies. Models with a water meter manifold incorporate a quarter turn stop valve or screw down stop valve (see model), and an approved check valve cartridge however, the complete product has not been fully tested to demonstrate it provides backflow protection. Maximum working pressure 16.0 bar. Cold water use only.

Section:: 1510 Water Meter Manifolds
Size:: 1 ½” BSP (F) inlet connection.
Marking:: Ebco (brand of Talis UK) and date of manufacture (MM/YY) on body.
Installation Requirements:: R001 R008 R120
Expiry date:: 30/06/2027
Model:: 4 Port manifold: MANI4. 4 Port manifold with meter manifold connection tails (only): MANI43, MANI44. 4 Port manifold, connection tails and water meter manifold with screw down stop valve: MANI401, MANI402, MANI403, MANI410, MANI411, MANI420. 4 Port manifold, connection tails and water meter manifold with quarter turn stop valve: MANI451, MANI452. 6 Port manifold: MANI6. 6 Port manifold with meter manifold connection tails (only): MANI63, MANI64. 6 Port manifold, connection tails and water meter manifold with screw down stop valve: MANI601, MANI602, MANI603, MANI610, MANI611. 6 Port manifold, connection tails and water meter manifold with quarter turn stop valve: MANI651.

Approval Holder:: Atlantic Plastics Ltd.

Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company
Manufacturer:: Atlantic Plastics Ltd.

Company Name
Atlantic Plastics Ltd.
Address
Coytraherne Close, Brackla, Bridgend
Postcode
CF31 2AX
Country
United Kingdom
Phone
01656672628
General Email
rhodgkiss@atplas.co.uk

View All Listings by this Company

WRAS Approval Number: #2207708

Range of click type pop-up wastes with brass bodies. Maximum operating temperature 60°C.

Section:: 1535 Miscellaneous
Section Subtitle:: Tap accessories.
WRAS Approval Number:: 2207708
Note:: Open outlet use only
Size:: 1 ¼” BSP (M)
Marking:: Lota on body
Installation Requirements:: R001
Expiry date:: 31/07/2027
Model:: 62531-00-0A 60144-00-01 60144-00-00 Model added October 2023 60144-00-03X

Approval Holder:: Xiamen Lota International Co., Ltd.

Company Name
Xiamen Lota International Co., Ltd.
Address
No. 61 Xing Nan Road Jimei District Xiamen
Postcode
361022
Country
China
General Email
liwenjuan@lota.com.cn

View All Listings by this Company
Manufacturer:: Xiamen Lota International Co., Ltd.

Company Name
Xiamen Lota International Co., Ltd.
Address
No. 61 Xing Nan Road Jimei District Xiamen
Postcode
361022
Country
China
General Email
liwenjuan@lota.com.cn

View All Listings by this Company

WRAS Approval Number: #2206023

Range of installation kits with brass bodies. Maximum working pressure 5.0 bar. Maximum operating temperature 85°C.

Section:: 1535 Miscellaneous
Section Subtitle:: Tap accessories.
WRAS Approval Number:: 2206023
Size:: ¾” (M) to ½” (F) BSP Adaptor
Marking:: SHS on body
Installation Requirements:: R001 R010
Expiry date:: 30/06/2027
Model:: V718-IS- XX – Installation Kit Rough V818-IS-XX – Installation Kit Rough (Unassembled) V758-IS-XX – Installation Kit Rough – Spout Rough Only V718-IS-EXT-XX 25mm Extension Kit XX denotes the surface finish. It will always appear as the last digits of the product code as a combination of two or three letters or numbers, as examples: CP = chrome finish, URM urban brass matt lacquered.

Approval Holder:: Samuel Heath & Sons Plc

Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Country
United Kingdom
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company
Manufacturer:: Samuel Heath & Sons Plc

Company Name
Samuel Heath & Sons Plc
Address
100 Leopold Street Birmingham
Postcode
B12 0UJ
Country
United Kingdom
Phone
+44 (0) 1217 662 200
General Email
kay.stead@samuel-heath.com

View All Listings by this Company

WRAS Approval Number: #2204088

Range of brass (chrome plated) quick fit connectors. Maximum operating temperature 60°C

Section:: 1535 Miscellaneous
Section Subtitle:: Tap accessories.
WRAS Approval Number:: 2204088
Note:: Open outlet use only
Size:: See models
Marking:: AQUATOOLS on body.
Installation Requirements:: R001
Expiry date:: 30/04/2027
Model:: AT821122 (F), AT821123 ½” BSP (M), AT821124 (M) & AT821125 (M) quick fit connectors

Approval Holder:: AQUATOOLS

Company Name
AQUATOOLS
Address
26 rue Charles Edouard Jeanneret 78300 Poissy
Country
France

View All Listings by this Company