Directory Search Results

Print List

#250504712

Range of counter-top or under-sink electrical water heaters. Maximum working pressure 6.5 bar. Maximum operating temperature 75°C, except 65°C for 10L models.

Section:
1390 Heaters
Section Subtitle:
Electric, thermal storage, mains fed, open outlet.
WRAS Approval Number:
250504712
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1/2” BSP (M)
Marking:
Midea logo on body. Midea logo, Capacity, Model No.,Pressure, Other tech info on data label on body
Installation Requirements:
R001
Expiry date:
31/05/2030
Model:
Da-bcd a = Volume (available in 10, 15 & 30), b = Rated power (available in 20 & 30, 20 stands for 2kW, 30 for 3kW), c = Cover type (available in VD, VD2 & VD3), d = Installation position (available in O & U, O stands for over sink, U stands for under sink) Where a typical code is: ①D10-20VDO: 10 = volume (L) 20 = rated power (2kW) VD = the type of cover O = over sink range ②D30-30VD3U: 30 = volume (L) 30 = rated power (3kW) VD3 = the type of cover U = under sink range

Approval Holder:
Wuhu Midea Kitchen & Bath Appliances Manufacturing Co., Ltd.
Company Name
Wuhu Midea Kitchen & Bath Appliances Manufacturing Co., Ltd.
Address
Wanchun East Road Economic and Technological Development Zone Wuhu City Anhui Province
Country
China

View All Listings by this Company

Print This Approval


#250504715

Range of counter-top or under-sink electrical water heaters. Maximum working pressure 6.5 bar. Maximum operating temperature 75°C, except 65°C for 10L models.

Section:
1390 Heaters
Section Subtitle:
Electric, thermal storage, mains fed, open outlet.
WRAS Approval Number:
250504715
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1/2” BSP (M)
Marking:
Flomasta on body & week of manufacture & other tech info on data label.
Installation Requirements:
R001
Expiry date:
31/05/2030
Model:
D10-20VD3 (5063022583697) 10L 2kw VD3 cover D15-20VD3 (5063022583680) 15L 2kw VD3 cover D15-30VD3 (5063022583710) 15L 3kw VD3 cover D30-30VD3 (5063022583703) 30L 3kw VD3 cover

Approval Holder:
Kingfisher International Products Ltd
Company Name
Kingfisher International Products Ltd
Address
1 Paddington Square, London
Postcode
W2 1GG
Phone
07721 260713
General Email
eric.capotummino@kingfisher.com

View All Listings by this Company

Print This Approval


#250602716

Range of wall hung, gas-fired condensing combination boilers providing domestic hot water via a plate heat exchanger. The pressurised central heating system incorporates an expansion vessel and pressure relief valve set at 3.0 bar. Some models, please refer to model below, incorporate only a primary circuit. Maximum working pressures: Primary circuit: 2.5 bar, Secondary circuit 10.0 bar. Maximum operating temperature both circuits: 60°C.

Section:
1465 Heaters
Section Subtitle:
Combination boilers and Water Jacketed Tube heaters. Low volume water content. Heat retained in water heaters will cause expansion of water after closure of draw-off taps and valves. Provision for expansion of water must be made to accommodate excess pressure within the system. Particular care is required where check valves are positioned, or loose jumper valves are thought to be upstream of the heater.
WRAS Approval Number:
250602716
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Marking:
Warmhaus on front panel. Warmhaus, product name and operating info on label on side panel
Installation Requirements:
R001 R140 R360
Expiry date:
30/06/2030
Model:
Following models are ¾” BSP M inlet/outlet primary circuit, ½” BSP M inlet/outlet secondary circuit. KM0725250101005901 EWA 2525C 25KW KM0725300101005901 EWA 2530 C 30 KW KM0725310303008701 MINERWA 25/31 COMBI BOILER IE (BLACK) KM0725300201008901 ENERWA PLUS 2530 C - UK KM0325300201001301 ENERWA PLUS 2530 C - UK + FLUE KIT KM0730350201008901 ENERWA PLUS 3035 C - UK KM0330350201001301 ENERWA PLUS 3035 C + F.KIT - DHW 35 - UK KM0735400201008901 ENERWA PLUS 3540 C - UK KM0335400201001301 ENERWA PLUS 3540 C - UK KOMBI KM0742400201001301 ENERWA PLUS 4240 C 40 KW - UK KM0745430201001301 ENERWA PLUS 4543 C 43 KW - UK KM0725310303009801 EXP.MINERWA 25 SYSTEM BOLER (BLACK) KM1220240101012201 GLOWA 2024 KM1224260101012201 GLOWA 2426 KM1228300101012201 GLOWA 2830 KM1233350101012201 GLOWA 3335 KM1220240101012401 GLOWA SMART 20/24 20KW KM1224260101012401 GLOWA SMART 24/26 24KW KM1228300101012401 GLOWA SMART 28/30 28KW KM1233350101012401 GLOWA SMART 33/35 33KW Following models are ¾” BSP M inlet/outlet and are primary circuit only KM1024000201005501 EXP.ENERWA PLUS H.O 2500H KM1024000201010201 EXP. WARMHAUS ENERWA PLUS H.O 2500H - UK KM1028000201005501 EXP.WARMHAUS ENERWA PLUS H.O 3000H KM1028000201010201 EXP.WARMHAUS ENERWA PLUS H.O 3000H - UK KM1033000201005501 EXP.WARMHAUS ENERWA PLUS H.O 3500H KM1033000201010201 EXP.WARMHAUS ENERWA PLUS H.O 3500H - UK KM1133000201005501 EXP.WARMHAUS ENERWA PLUS H.O 3500H+F.KIT KM1133000201006201 EXP.WARMHAUS ENERWAPLUS HO 3500H-D+F.KIT KM1142000201005501 ENERWA PLUS H.O 4200H KM1145000201005501 ENERWA PLUS H.O 4500H KM1220000101012301 GLOWA 20 H.O. KM1224000101012301 GLOWA 24 H.O. KM1228000101012301 GLOWA 28 H.O. KM1233000101012301 GLOWA 33 H.O.

Manufacturer:
Warmhaus Isitma VE Sogutma Sistemleri Sanayi Ticaret A.S.
Company Name
Warmhaus Isitma VE Sogutma Sistemleri Sanayi Ticaret A.S.
Address
Nilufer Organise Sanayi Bolgesi Selvi Cad No:3 Nilufer Bursa Turkey
Phone
+90-224-2959400

View All Listings by this Company

Print This Approval


#2305096

GKMV30P range in-line volumetric water meters with black plastic bodies. Maximum working pressure 16.0 bar. Cold water use only.

Section:
1505 Water Meters
Size:
See model.
Marking:
GKM branded logo on lid. Flow direction arrow, Meter type (GKMV30P) & additional information on Chamber Housing.
Installation Requirements:
R001
Expiry date:
31/05/2028
Model:
GKMV30P Range: DN15: ¾" BSP (M) inlet and outlet, DN20: 1" BSP (M) inlet and outlet, DN25: 1¼" BSP (M) inlet and outlet.

Approval Holder:
George Kent (Vietnam) Co Ltd
Company Name
George Kent (Vietnam) Co Ltd
Address
F3-6 (Area A), Lot A4, NA1 Street Thoi Hoa Industrial Park, Thoi Hoa Ward, Ben Cat City Binh Duong Province
Country
Vietnam
Phone
+84 274 3803 167
General Email
lhpan@georgekent.net

View All Listings by this Company

Print This Approval


#2305097

GKMV30P range in-line volumetric water meters with black plastic bodies. Maximum working pressure 16.0 bar. Cold water use only.

Section:
1505 Water Meters
Size:
See model.
Marking:
GKM branded logo on lid. Flow direction arrow, Meter type (GKMV30P) & additional information on Chamber Housing.
Installation Requirements:
R001
Expiry date:
31/05/2028
Model:
GKMV30P Range: DN15: ¾" BSP (M) inlet and outlet, DN20: 1" BSP (M) inlet and outlet, DN25: 1¼" BSP (M) inlet and outlet.

Approval Holder:
George Kent (Malaysia) Berhad
Company Name
George Kent (Malaysia) Berhad
Address
George Kent Technology Centre 1115 Jalan Puchong Taman Meranti Jaya 47120 Puchong Selangor
Country
Malaysia

View All Listings by this Company

Print This Approval


#250602045

Range of water meters with brass and plastic bodies and plastic turbines. The inlet incorporates a plastic filter Maximum working pressure 16.0 Bar Maximum operating temperature 50.0°C

Section:
1505 Water Meters
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
¾” to 2 ½” BSP M (G models) DN 50 flanged (FL Models)
Marking:
Zenner logo, Model, ZR, CE, date of manufacture (YYYY) and other information on faceplate. Flow arrow and date of manufacture (YYYY) on body.
Installation Requirements:
R001 R008
Expiry date:
30/06/2030
Model:
MTKD 2,5-165-G ¾ B (½) MTKD 4-190-G 1 B (¾) MTKD 6,3-260-G 1 ¼ B (1) MTKD 10-260-G 1 ¼ B (1) MTKD 10-260-G 1 ½ B (5/4) MTKD 16-300-G 2 B (6/4) MTKD 25-270-G 2 ½ B (2) MTKD 25-300- G 2 ½ B (2) MTKD 25-270-FL MTKD 25-300-FL MTKD-L 2,5-165-G ¾ B (½) MTKD-L 4-190-G 1 B (¾)

Manufacturer:
Zenner International Gmbh & Co. KG
Company Name
Zenner International Gmbh & Co. KG
Address
Heinrich‐Barth‐Str. 29, 66115 Saarbrücken, Germany
Country
Germany

View All Listings by this Company

Print This Approval


#240902088

Range of ‘Tcontrols’ immersion heater elements incorporating brass or DZR heads with either a copper, stainless steel, alloy or titanium heating element and a black EPDM ‘O’-ring. Open outlet use only. Maximum operating temperature 99°C

Section:
1530 Miscellaneous Fittings
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
RT – 1.1/4” BSP (M) to 2.1/4” BSP (M) RF – 48 mm OD
Marking:
"Tcontrols" logo, Model, Voltage, Size and other information on cap.
Installation Requirements:
R001
Expiry date:
30/09/2029
Model:
Model Code: XXYZS Where XX denotes the boss type and can be replaced with any of the following: RT = Thread Type RF = Flange Type Where Y denotes the heating tube material and can be replaced with any of the following: 1 = Copper 2 = AISI 304 / AISI 304L 3 = AISI 321 4 = AISI 316 / AISI 316L 5 = Alloy 800 / Alloy 825 / Alloy 840 6 = Titanium 7 = AISI 309S 8 = AISI 310 Where Z denotes the brazing system and can be replaced with any of the following: A = Tin Alloy B = Silver Alloy C = Itek Brazing Where S denotes the surface enamelling and can be replaced with either of the following: S = Enamelled Blank = Not Enamelled

Approval Holder:
Thermowatt S.p.A.
Company Name
Thermowatt S.p.A.
Address
Via San Giovanni Battista 21 Arcevia
Postcode
60011
Country
Italy
Phone
+39 0731988246
General Email
thermowatt@legalmail.it

View All Listings by this Company

Print This Approval


#240902089

Range of ‘SureCal’ immersion heater elements incorporating brass or DZR heads with either a copper, stainless steel, alloy or titanium heating element and a black EPDM ‘O’-ring. Open outlet use only. Maximum operating temperature 99°C

Section:
1530 Miscellaneous Fittings
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
RT – 1.1/4” BSP (M) to 2.1/4” BSP (M) RF – 48 mm OD
Marking:
'SureCal' logo, Model, Voltage, Size and other information on label.
Installation Requirements:
R001
Expiry date:
30/09/2029
Model:
Model Code: XXYZS Where XX denotes the boss type and can be replaced with any of the following: RT = Thread Type RF = Flange Type Where Y denotes the heating tube material and can be replaced with any of the following: 1 = Copper 2 = AISI 304 / AISI 304L 3 = AISI 321 4 = AISI 316 / AISI 316L 5 = Alloy 800 / Alloy 825 / Alloy 840 6 = Titanium 7 = AISI 309S 8 = AISI 310 Where Z denotes the brazing system and can be replaced with any of the following: A = Tin Alloy B = Silver Alloy C = Itek Brazing Where S denotes the surface enamelling and can be replaced with either of the following: S = Enamelled Blank = Not Enamelled

Approval Holder:
Thermowatt S.p.A.
Company Name
Thermowatt S.p.A.
Address
Via San Giovanni Battista 21 Arcevia
Postcode
60011
Country
Italy
Phone
+39 0731988246
General Email
thermowatt@legalmail.it

View All Listings by this Company

Print This Approval


#250602705

Range of flow meters with plastic bodies. Maximum working pressure 8.0 bar Maximum operating temperature 40°C.

Section:
1530 Miscellaneous Fittings
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
3/8” BSP (F) x 3/8” BSP (M)
Marking:
BWT Logo on LCD display. Digmesa and flow arrow on body.
Installation Requirements:
R001
Expiry date:
30/06/2030
Model:
812486 (930-0074) Aquameter 3/8” with Relais. 812185 (938-A930/LE5117) Aquameter 3/8” with LCD Display. 812495 (938-A70/LE5113) Aquameter HF 3/8” with LCD Display.

Approval Holder:
BWT Holding GmbH
Company Name
BWT Holding GmbH
Address
Walter-Simmer-Straße 4 Mondsee
Postcode
5310
Country
Austria
Phone
+436648172152
General Email
andreas.stiegler@aidu.solutions

View All Listings by this Company

Print This Approval


#250802702

Range of single and twin ended shower booster pumps with plastic bodies and plastic impellers. The inlets/outlets incorporate stainless steel braided EPDM lined flexible hose assemblies with isolation valves and stainless-steel strainers. The outlets incorporate approved check valve cartridges however, the complete product has not been fully tested to demonstrate it provides backflow protection. The Universal Twin models incorporate an expansion vessel. Maximum working pressure 1.5, 1.8, 2.0, 2.5, 2.6, 3.0 Bar (see model for more details). Maximum operating temperature: 60.0°C.

Section:
1610 Pumps
Section Subtitle:
Wholesome water use.
WRAS Approval Number:
250802702
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
15mm, 21mm or 22mm Push fit connections for use with copper pipe EN1057
Marking:
Salamander Pumps logo on body. Salamander Pumps and technical information on adhesive label on body
Installation Requirements:
R001 R150 R415
Expiry date:
31/08/2030
Model:
CT RANGE: CT50+XTRA 15mm, CT50XTRA 15mm, CT54XTRA 15mm, CT55+XTRA 15mm, CT55XTRA 15mm, CT59XTRA 15mm, CT75+XTRA 15mm, CT75XTRA 15mm, CT79XTRA 15mm, CT85+XTRA 15mm, CT85XTRA 15mm, CT89XTRA 15mm, CT60B 15mm, CT60BU 15mm, CT64HUXTRA 15mm, CT64HXTRA 15mm, CT80B 22mm, CT80BU 22mm, CT84HUXTRA 21mm, CT84HXTRA 21mm, CTFORCE15IPT 21mm, CTFORCE15ITU 21mm, CTFORCE15PT 22mm, CTFORCE15TU 22mm, CTFORCE20IPS 21mm, CTFORCE20IPT 21mm, CTFORCE20ISU 21mm, CTFORCE20ITU 21mm, CTFORCE20PT 22mm, CTFORCE20PS 22mm, CTFORCE20SU 22mm, CTFORCE20TU 22mm, CTFORCE30IPS 21mm, CTFORCE30IPT 21mm, CTFORCE30ISU 21mm, CTFORCE30ITU 21mm, CTFORCE30PS 22mm, CTFORCE30PT 22mm, CTFORCE30SU 22mm, CTFORCE30TU 22mm, ACTFORCE30SU 22mm. KEY: XTRA = Plastic Ended, B = Plastic Ended with Plastic Bypass, H = Plastic Ended with Plastic Bypass (Ireland), FORCE = Brass Ended, A = Manufactured for a separate company. U = Includes expansion vessel, P = No expansion vessel, T= Twin ended pump, S = Single ended pump, I = sold in Ireland, + = supplied with couplers with isolating valves. The XTRA models without a + come with couplers without isolating valves. The rest of the product ranges include isolating valves as standard. 50/54/55/59/15 = 1.5 Bar, 60/64 = 1.8 Bar, 75/79/20 = 2.0 Bar, 85/89 = 2.5 Bar 80/84 = 2.6 Bar, 30 = 3.0 Bar.

Manufacturer:
Salamander Pumps
Company Name
Salamander Pumps
Postcode
SR5 3XE
Country
United Kingdom
Phone
0191 535 4528

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 172 of 226

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.