Directory Search Results

Print List

#260102703

Range of hot pressed moulded GRP sectional cold water storage cisterns. Larger cisterns are fitted with PVC roof supports and are supplied with stainless steel ladders, tie rods, braces and hatches. Cold water use only.

Section:
0135 Cisterns
Section Subtitle:
Cold-water storage with cover or roof - plastic, sectional. Cisterns in this section are not suitable for water for domestic purposes unless they are so modified and installed as to comply in all respects with Schedule 2. Paragraph 16(4), of the Water Supply (Water Fittings) Regulations 1999.
WRAS Approval Number:
260102703
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
NON-POTABLE USE ONLY.
Size:
1000 litres 430,000 litres.
Marking:
Mitsubishi chemical infratec, Hishitank, capacity, model, size, serial number on label on body.
Installation Requirements:
R001 R270 R280
Expiry date:
31/01/2031
Model:
GE & GSE Hishitank.

Approval Holder:
Mitsubishi Chemical Infratec Co., Ltd.
Company Name
Mitsubishi Chemical Infratec Co., Ltd.
Address
1-1, Marunouchi 1-Chome, Chiyoda-ku, Tokyo 100-8251
Country
Japan
Phone
+81-80-2683-2994
General Email
yusuke.nakao.ma@mcgc.com

View All Listings by this Company

Print This Approval


#251001702

Dudley Turbo Edge dual flush syphonic flushing apparatus with Polypropylene body and stainless steel link for use with WC flushing cisterns and WC suites.

Section:
1305 Flushing Mechanisms
Section Subtitle:
WC. Except where specified, flushing valves within this section have only completed a limited number of the performance and endurance tests as stated in the "Regulators Specification for WC suites installed after 1st January 2001". The flush volume of valves within this section have not been verified by test. When installed in combination with a WC cistern and pan, further performance tests will be required.
WRAS Approval Number:
251001702
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
1½” Outlet, Adjustable syphon height 7½” to 9½”.
Marking:
Dudley Turbo Edge on cap.
Installation Requirements:
R001 R556
Expiry date:
31/10/2030
Model:
Dudley Turbo Edge Adjustable Syphon.

Approval Holder:
Thomas Dudley Limited
Company Name
Thomas Dudley Limited
Postcode
DY1 4SJ
Country
United Kingdom
Phone
0121 530 7053
General Email
jcresswell@thomasdudley.co.uk

View All Listings by this Company

Print This Approval


#260104705

Bidet seat assembly which discharges via a sensor actuated solenoid valve and utilises a ‘Type AD’ air gap arrangement (verified by test -suitable for backflow prevention against Fluid Category 5). The inlet incorporates a strainer and flow regulator and is pumped from an internal water storage cistern via a heating unit to various outlet nozzle arrangements. Maximum working pressure 10 bar. Cold water supply only.

Section:
0278 Bidets and associated fittings
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
TOTO printed on seat body. TOTO & product info on label on rear of seat.
Installation Requirements:
R001 R574
Expiry date:
31/01/2031
Model:
Neorest EW 2.0 – TCF994RWGE

Approval Holder:
TOTO Europe GmbH
Company Name
TOTO Europe GmbH
Address
Zollhof 2 40211 Düsseldorf Germany
Phone
+49 211 273080

View All Listings by this Company

Print This Approval


#251202705

Range of bottom entry BS1212-4 (2016) delayed or non delayed action type float operated valves for WC flushing cisterns. Maximum working pressure 10.0 Bar, cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
251202705
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
FLUME on float. BS1212-4 only body.
Installation Requirements:
R001 R550 R560
Expiry date:
31/12/2030
Model:
AB769 Bottom entry inlet valve with G1/2” plastic thread AB769 Bottom entry inlet valve with G1/2” brass thread

Approval Holder:
Toolstation Ltd.
Company Name
Toolstation Ltd.
Address
Travis Perkins PLC Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton
Postcode
NN5 7UA
Country
United Kingdom
Phone
07392109053
General Email
benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Print This Approval


#251102003

Range of side entry BS1212-4 (2016), delayed action or non-delayed action type float operated valves for WC flushing cisterns. The inlet incorporates an optional flow restrictor. Maximum working pressure 10.0 Bar Maximum operating temperature Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
251102003
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Model can be supplied with either a brass or plastic ½” connection, a plastic 3/8” connection and either delayed or non-delayed action type float valve.
Size:
3/8” BSP (M) 1/2” BSP (M) (brass or plastic inlet connection)
Marking:
FLUME on float. BS1212-4 on body
Installation Requirements:
R001 R550
Expiry date:
30/11/2030
Model:
AB772

Approval Holder:
Toolstation Ltd.
Company Name
Toolstation Ltd.
Address
Travis Perkins PLC Ryehill House Rye Hill Close Lodge Farm Industrial Estate Northampton
Postcode
NN5 7UA
Country
United Kingdom
Phone
07392109053
General Email
benjamin.cockerill@travisperkins.co.uk

View All Listings by this Company

Print This Approval


#250904710

Range of bottom and side entry BS1212-4 (2016) compact type float operated inlet valves, for WC flushing cisterns with plastic bodies and adjustable floats and a plastic flow regulator at the inlet. Maximum operating pressure: 10 bar. Maximum operating temperature: 23°C.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
250904710
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
IRN R560 only applied to model AG104 PLUS BOTTOM.
Size:
See models.
Marking:
OLI & BS1212-4 on body.
Installation Requirements:
R001 R550 R560
Expiry date:
30/09/2030
Model:
AG104 PLUS SIDE - ½” BSP (M), AG104 PLUS VERTICAL - 3/8” Captive Nut, AG104 PLUS BOTTOM - ½” BSP (M).

Approval Holder:
Oli-Sistemas Sanitarios, S.A
Company Name
Oli-Sistemas Sanitarios, S.A
Postcode
3800-314 Aveiro
Country
Portugal
General Email
geral@oli-world.com

View All Listings by this Company

Print This Approval


#251002022

Bottom entry BS1212-4 (2016) compact type float operated inlet valve for WC flushing cisterns with a plastic body and a plastic flow regulator at the inlet. Maximum working pressure 10.0 Bar Cold water use only

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
251002022
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
SHUN JIE, BS 1212-4, WRAS logo and datum level on valve body.
Installation Requirements:
R001 R550 R560
Expiry date:
31/10/2030
Model:
F7

Approval Holder:
Yuyao Mazhu Shunjie Sanitary Ware Equipment Factory
Company Name
Yuyao Mazhu Shunjie Sanitary Ware Equipment Factory
Address
89 Malang Road, Changlingjiang Village, Mazhu Town, Yuyao City, Zhejiang

View All Listings by this Company
Manufacturer:
Yuyao Mazhu Shunjie Sanitary Ware Equipment Factory
Company Name
Yuyao Mazhu Shunjie Sanitary Ware Equipment Factory
Address
89 Malang Road, Changlingjiang Village, Mazhu Town, Yuyao City, Zhejiang

View All Listings by this Company

Print This Approval


#251202710

Bottom entry or side entry BS1212-4 (2016) compact type float operated inlet valve for WC flushing cisterns with a plastic body and a plastic flow regulator at the inlet. Maximum working pressure 10.0 Bar Cold water use

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
251202710
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
IRN R560 applies to the bottom entry model only
Size:
½” BSP (M)
Marking:
NAT logo and BS1212-4 on float , datum level on valve body.
Installation Requirements:
R001 R550 R560
Expiry date:
31/12/2030
Model:
NA206 AG Bottom Fill Valve NA306 AG Side Fill Valve

Approval Holder:
Xiamen Nat Plumbing Inc.
Company Name
Xiamen Nat Plumbing Inc.
Address
UNIT 2, 5TH FLR. NO.18‐8 XIAFEI ROAD, HAICANG DISTRICT, 361028 XIAMEN, P. R. CHINA
Country
China
Phone
86-592-6538317

View All Listings by this Company

Print This Approval


#250402714

Range of BS1212-4 (2016) compact type float operated valves for WC flushing cisterns, with bottom entry. The inlet incorporates a plastic strainer. Maximum working pressure 10.0 Bar Cold Water Use Only

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
250402714
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Size:
½” BSP (M)
Marking:
Unitop logo, BS1212-4 & datum level on body.
Installation Requirements:
R001 R550 R560 R562
Expiry date:
30/04/2030
Model:
A28-06 254

Approval Holder:
Ellsi Limited
Company Name
Ellsi Limited
Postcode
DN15 8SL
Country
United Kingdom
General Email
martin@ellsi.co.uk

View All Listings by this Company
Manufacturer:
Xiamen Unitop Plumbing Technology Co Ltd
Company Name
Xiamen Unitop Plumbing Technology Co Ltd
Address
No. 1 Building No. 469 Jinyuan West Road Xinglin
Country
Jimei District
Phone
+86 592 6379968
General Email

View All Listings by this Company
Manufacturer:
Xiamen Unitop Plumbing Technology Co Ltd
Company Name
Xiamen Unitop Plumbing Technology Co Ltd
Address
No. 1 Building No. 469 Jinyuan West Road Xinglin
Country
Jimei District
Phone
+86 592 6379968
General Email

View All Listings by this Company

Print This Approval


#251102048

Range of side entry BS1212-4 (2016), delayed action or non-delayed action type float operated valves for WC flushing cisterns. The inlet incorporates an optional flow restrictor. Maximum working pressure 10.0 Bar Maximum operating temperature Cold water use only.

Section:
2075 Float Operated Inlet Valve
Section Subtitle:
Can be used to achieve a recognised air gap arrangement, providing it meets the appropriate backflow requirements. Suitable for use in a WC suite, provided it forms an arrangement which meets the requirements of Type AUK1 air gap and an appropriate WC performance specification.
WRAS Approval Number:
251102048
Basis of Compliance:
Tested to regulators Specification Test Code Sheets
Note:
Model M3230WR can be supplied with either a brass or plastic ½” connection, a plastic 3/8” connection and either delayed or non-delayed action type float valve.
Size:
3/8” BSP (M) 1/2” BSP (M) (brass or plastic inlet connection)
Marking:
Miellat, Model number & BS1212-4 on body.
Installation Requirements:
R001 R550
Expiry date:
30/11/2030
Model:
M3230WR

Approval Holder:
Miellat Industries LLC
Company Name
Miellat Industries LLC
Address
Unit B-24, KEZAD Logistics Park, 2 Al Zaeem St, Khalifa Industrial Zone Abu Dhabi
Country
U.A.E
General Email
info@miellat.com

View All Listings by this Company

Print This Approval



Back To Directory Sections

Page 18 of 21

We use cookies to give you the best possible experience with WRAS. Some are essential to provide website functions and ensure the website is secure. We also use cookies to help us understand how people use the site and to make improvements. Click "Accept All" to enable recommended settings or click "Manage cookies" to adjust your settings. For more details, see our Cookie Policy.